@@ -320,7 +320,7 @@ struct it87_devices {
* second SIO address. Never exit configuration mode on these
* chips to avoid the problem.
*/
-#define FEAT_CONF_NOEXIT BIT(19) /* Chip should not exit conf mode */
+#define FEAT_NOCONF BIT(19) /* Chip conf mode enabled on startup */
#define FEAT_FOUR_FANS BIT(20) /* Supports four fans */
#define FEAT_FOUR_PWM BIT(21) /* Supports four fan controls */
#define FEAT_FOUR_TEMP BIT(22)
@@ -452,7 +452,7 @@ static const struct it87_devices it87_devices[] = {
.model = "IT8790E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
- | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF | FEAT_CONF_NOEXIT,
+ | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF | FEAT_NOCONF,
.peci_mask = 0x07,
},
[it8792] = {
@@ -461,7 +461,7 @@ static const struct it87_devices it87_devices[] = {
.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF
- | FEAT_CONF_NOEXIT,
+ | FEAT_NOCONF,
.peci_mask = 0x07,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
@@ -507,7 +507,7 @@ static const struct it87_devices it87_devices[] = {
.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
| FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF
- | FEAT_CONF_NOEXIT,
+ | FEAT_NOCONF,
.peci_mask = 0x07,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
@@ -544,7 +544,7 @@ static const struct it87_devices it87_devices[] = {
#define has_four_temp(data) ((data)->features & FEAT_FOUR_TEMP)
#define has_six_temp(data) ((data)->features & FEAT_SIX_TEMP)
#define has_vin3_5v(data) ((data)->features & FEAT_VIN3_5V)
-#define has_conf_noexit(data) ((data)->features & FEAT_CONF_NOEXIT)
+#define has_noconf(data) ((data)->features & FEAT_NOCONF)
#define has_scaling(data) ((data)->features & (FEAT_12MV_ADC | \
FEAT_10_9MV_ADC))
#define has_fanctl_onoff(data) ((data)->features & FEAT_FANCTL_ONOFF)
@@ -748,7 +748,7 @@ static int smbus_disable(struct it87_data *data)
superio_select(data->sioaddr, PME);
superio_outb(data->sioaddr, IT87_SPECIAL_CFG_REG,
data->ec_special_config & ~data->smbus_bitmap);
- superio_exit(data->sioaddr, has_conf_noexit(data));
+ superio_exit(data->sioaddr, has_noconf(data));
}
return 0;
}
@@ -765,7 +765,7 @@ static int smbus_enable(struct it87_data *data)
superio_select(data->sioaddr, PME);
superio_outb(data->sioaddr, IT87_SPECIAL_CFG_REG,
data->ec_special_config);
- superio_exit(data->sioaddr, has_conf_noexit(data));
+ superio_exit(data->sioaddr, has_noconf(data));
}
return 0;
}
@@ -3143,7 +3143,7 @@ static int __init it87_find(int sioaddr, unsigned short *address,
}
exit:
- superio_exit(sioaddr, config ? has_conf_noexit(config) : false);
+ superio_exit(sioaddr, config ? has_noconf(config) : false);
return err;
}
@@ -3540,7 +3540,7 @@ static void it87_resume_sio(struct platform_device *pdev)
reg2c);
}
- superio_exit(data->sioaddr, has_conf_noexit(data));
+ superio_exit(data->sioaddr, has_noconf(data));
}
static int it87_resume(struct device *dev)
Rename previous definitions to match the new information that they are preinitialised as enabled and should not receive codes to enter or exit configuration mode. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> --- drivers/hwmon/it87.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)