| Message ID | 20240614185924.604672-1-linux@roeck-us.net (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [RFT] hwmon: (spd5118) Add support for Renesas/ITD SPD5118 hub controllers | expand |
Am 14.06.24 um 20:59 schrieb Guenter Roeck: > The SPD5118 specification says, in its documentation of the page bits > in the MR11 register: > > " > This register only applies to non-volatile memory (1024) Bytes) access of > SPD5 Hub device. > For volatile memory access, this register must be programmed to '000'. > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > " > > Renesas/ITD SPD5118 hub controllers take this literally and disable access > to volatile memory if the page selected in MR11 is != 0. Since the BIOS or > ROMMON will access the non-volatile memory and likely select a page != 0, > this means that the driver will not instantiate since it can not identify > the chip. Even if the driver instantiates, access to volatile registers > is blocked after a nvram read operation which selects a page other than 0. > > To solve the problem, add initialization code to select page 0 during > probe. Before doing that, use basic validation to ensure that this is > really a SPD5118 device and not some random EEPROM. Explicitly select > page 0 when accessing the volatile register space, and protect volatile > register access against nvmem access using the device mutex. Hi, maybe we can use struct regmap_range_cfg so the paged register accesses are being done by the regmap code itself? Thanks, Armin Wolf > > Cc: Sasha Kozachuk <skozachuk@google.com> > Cc: John Hamrick <johnham@google.com> > Signed-off-by: Guenter Roeck <linux@roeck-us.net> > --- > This patch depends on the spd5118 patch series submitted earlier. > > RFT: I was only able to test this patch with DDR5 using the Montage > Technology SPD5118 hub controller. It needs testing with the Renesas > hub controller, and could use some additional testing with other DIMMs. > > drivers/hwmon/spd5118.c | 164 +++++++++++++++++++++++++++++----------- > 1 file changed, 119 insertions(+), 45 deletions(-) > > diff --git a/drivers/hwmon/spd5118.c b/drivers/hwmon/spd5118.c > index ac94a6779360..96052ef4256b 100644 > --- a/drivers/hwmon/spd5118.c > +++ b/drivers/hwmon/spd5118.c > @@ -74,7 +74,7 @@ static const unsigned short normal_i2c[] = { > > struct spd5118_data { > struct regmap *regmap; > - struct mutex nvmem_lock; > + struct mutex access_lock; > }; > > /* hwmon */ > @@ -92,6 +92,29 @@ static u16 spd5118_temp_to_reg(long temp) > return (DIV_ROUND_CLOSEST(temp, SPD5118_TEMP_UNIT) & 0x7ff) << 2; > } > > +static int spd5118_set_page(struct regmap *regmap, int page) > +{ > + unsigned int old_page; > + int err; > + > + err = regmap_read(regmap, SPD5118_REG_I2C_LEGACY_MODE, &old_page); > + if (err) > + return err; > + > + if (page != (old_page & SPD5118_LEGACY_MODE_MASK)) { > + /* Update page and explicitly select 1-byte addressing */ > + err = regmap_update_bits(regmap, SPD5118_REG_I2C_LEGACY_MODE, > + SPD5118_LEGACY_MODE_MASK, page); > + if (err) > + return err; > + > + /* Selected new NVMEM page, drop cached data */ > + regcache_drop_region(regmap, SPD5118_EEPROM_BASE, 0xff); > + } > + > + return 0; > +} > + > static int spd5118_read_temp(struct regmap *regmap, u32 attr, long *val) > { > int reg, err; > @@ -174,28 +197,44 @@ static int spd5118_read_enable(struct regmap *regmap, long *val) > static int spd5118_read(struct device *dev, enum hwmon_sensor_types type, > u32 attr, int channel, long *val) > { > - struct regmap *regmap = dev_get_drvdata(dev); > + struct spd5118_data *data = dev_get_drvdata(dev); > + struct regmap *regmap = data->regmap; > + int err; > > if (type != hwmon_temp) > return -EOPNOTSUPP; > > + mutex_lock(&data->access_lock); > + > + err = spd5118_set_page(regmap, 0); > + if (err) > + goto unlock; > + > switch (attr) { > case hwmon_temp_input: > case hwmon_temp_max: > case hwmon_temp_min: > case hwmon_temp_crit: > case hwmon_temp_lcrit: > - return spd5118_read_temp(regmap, attr, val); > + err = spd5118_read_temp(regmap, attr, val); > + break; > case hwmon_temp_max_alarm: > case hwmon_temp_min_alarm: > case hwmon_temp_crit_alarm: > case hwmon_temp_lcrit_alarm: > - return spd5118_read_alarm(regmap, attr, val); > + err = spd5118_read_alarm(regmap, attr, val); > + break; > case hwmon_temp_enable: > - return spd5118_read_enable(regmap, val); > + err = spd5118_read_enable(regmap, val); > + break; > default: > - return -EOPNOTSUPP; > + err = -EOPNOTSUPP; > + break; > } > + > +unlock: > + mutex_unlock(&data->access_lock); > + return err; > } > > static int spd5118_write_temp(struct regmap *regmap, u32 attr, long val) > @@ -256,14 +295,28 @@ static int spd5118_temp_write(struct regmap *regmap, u32 attr, long val) > static int spd5118_write(struct device *dev, enum hwmon_sensor_types type, > u32 attr, int channel, long val) > { > - struct regmap *regmap = dev_get_drvdata(dev); > + struct spd5118_data *data = dev_get_drvdata(dev); > + struct regmap *regmap = data->regmap; > + int err; > + > + mutex_lock(&data->access_lock); > + > + err = spd5118_set_page(regmap, 0); > + if (err) > + goto unlock; > > switch (type) { > case hwmon_temp: > - return spd5118_temp_write(regmap, attr, val); > + err = spd5118_temp_write(regmap, attr, val); > + break; > default: > - return -EOPNOTSUPP; > + err = -EOPNOTSUPP; > + break; > } > + > +unlock: > + mutex_unlock(&data->access_lock); > + return err; > } > > static umode_t spd5118_is_visible(const void *_data, enum hwmon_sensor_types type, > @@ -382,35 +435,12 @@ static const struct hwmon_chip_info spd5118_chip_info = { > > /* nvmem */ > > -static int spd5118_nvmem_set_page(struct regmap *regmap, int page) > -{ > - unsigned int old_page; > - int err; > - > - err = regmap_read(regmap, SPD5118_REG_I2C_LEGACY_MODE, &old_page); > - if (err) > - return err; > - > - if (page != (old_page & SPD5118_LEGACY_MODE_MASK)) { > - /* Update page and explicitly select 1-byte addressing */ > - err = regmap_update_bits(regmap, SPD5118_REG_I2C_LEGACY_MODE, > - SPD5118_LEGACY_MODE_MASK, page); > - if (err) > - return err; > - > - /* Selected new NVMEM page, drop cached data */ > - regcache_drop_region(regmap, SPD5118_EEPROM_BASE, 0xff); > - } > - > - return 0; > -} > - > static ssize_t spd5118_nvmem_read_page(struct regmap *regmap, char *buf, > unsigned int offset, size_t count) > { > int err; > > - err = spd5118_nvmem_set_page(regmap, offset >> SPD5118_PAGE_SHIFT); > + err = spd5118_set_page(regmap, offset >> SPD5118_PAGE_SHIFT); > if (err) > return err; > > @@ -439,19 +469,19 @@ static int spd5118_nvmem_read(void *priv, unsigned int off, void *val, size_t co > if (off + count > SPD5118_EEPROM_SIZE) > return -EINVAL; > > - mutex_lock(&data->nvmem_lock); > + mutex_lock(&data->access_lock); > > while (count) { > ret = spd5118_nvmem_read_page(data->regmap, buf, off, count); > if (ret < 0) { > - mutex_unlock(&data->nvmem_lock); > + mutex_unlock(&data->access_lock); > return ret; > } > buf += ret; > off += ret; > count -= ret; > } > - mutex_unlock(&data->nvmem_lock); > + mutex_unlock(&data->access_lock); > return 0; > } > > @@ -524,15 +554,65 @@ static const struct regmap_config spd5118_regmap_config = { > .cache_type = REGCACHE_MAPLE, > }; > > +static int spd5118_init(struct i2c_client *client) > +{ > + struct i2c_adapter *adapter = client->adapter; > + int err, regval, mode; > + > + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | > + I2C_FUNC_SMBUS_WORD_DATA)) > + return -ENODEV; > + > + regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE); > + if (regval < 0 || (regval && regval != 0x5118)) > + return -ENODEV; > + > + /* > + * If the type register returns 0, it is possible that the chip has a > + * non-zero page selected and takes the specification literally, i.e. > + * disables access to volatile registers besides the page register if > + * the page is not 0. Try to identify such chips. > + */ > + if (!regval) { > + mode = i2c_smbus_read_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE); > + if (mode < 0 || (mode & 0xf0) || !(mode & 0x07)) > + return -ENODEV; > + > + err = i2c_smbus_write_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE, 0); > + if (err) > + return -ENODEV; > + > + regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE); > + if (regval != 0x5118) { > + i2c_smbus_write_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE, mode); > + return -ENODEV; > + } > + } > + > + regval = i2c_smbus_read_byte_data(client, SPD5118_REG_CAPABILITY); > + if (regval < 0) > + return -ENODEV; > + > + if (!(regval & SPD5118_CAP_TS_SUPPORT)) > + return -ENODEV; > + > + /* We are reasonably sure that this is really a SPD5118 hub controller */ > + return 0; > +} > + > static int spd5118_probe(struct i2c_client *client) > { > struct device *dev = &client->dev; > - unsigned int regval, revision, vendor, bank; > + unsigned int revision, vendor, bank; > struct spd5118_data *data; > struct device *hwmon_dev; > struct regmap *regmap; > int err; > > + err = spd5118_init(client); > + if (err) > + return err; > + > data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > if (!data) > return -ENOMEM; > @@ -541,12 +621,6 @@ static int spd5118_probe(struct i2c_client *client) > if (IS_ERR(regmap)) > return dev_err_probe(dev, PTR_ERR(regmap), "regmap init failed\n"); > > - err = regmap_read(regmap, SPD5118_REG_CAPABILITY, ®val); > - if (err) > - return err; > - if (!(regval & SPD5118_CAP_TS_SUPPORT)) > - return -ENODEV; > - > err = regmap_read(regmap, SPD5118_REG_REVISION, &revision); > if (err) > return err; > @@ -561,7 +635,7 @@ static int spd5118_probe(struct i2c_client *client) > return -ENODEV; > > data->regmap = regmap; > - mutex_init(&data->nvmem_lock); > + mutex_init(&data->access_lock); > dev_set_drvdata(dev, data); > > err = spd5118_nvmem_init(dev, data); > @@ -572,7 +646,7 @@ static int spd5118_probe(struct i2c_client *client) > } > > hwmon_dev = devm_hwmon_device_register_with_info(dev, "spd5118", > - regmap, &spd5118_chip_info, > + data, &spd5118_chip_info, > NULL); > if (IS_ERR(hwmon_dev)) > return PTR_ERR(hwmon_dev);
Hi Armin, On 6/16/24 11:09, Armin Wolf wrote: > Am 14.06.24 um 20:59 schrieb Guenter Roeck: > >> The SPD5118 specification says, in its documentation of the page bits >> in the MR11 register: >> >> " >> This register only applies to non-volatile memory (1024) Bytes) access of >> SPD5 Hub device. >> For volatile memory access, this register must be programmed to '000'. >> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ >> " >> >> Renesas/ITD SPD5118 hub controllers take this literally and disable access >> to volatile memory if the page selected in MR11 is != 0. Since the BIOS or >> ROMMON will access the non-volatile memory and likely select a page != 0, >> this means that the driver will not instantiate since it can not identify >> the chip. Even if the driver instantiates, access to volatile registers >> is blocked after a nvram read operation which selects a page other than 0. >> >> To solve the problem, add initialization code to select page 0 during >> probe. Before doing that, use basic validation to ensure that this is >> really a SPD5118 device and not some random EEPROM. Explicitly select >> page 0 when accessing the volatile register space, and protect volatile >> register access against nvmem access using the device mutex. > > Hi, > > maybe we can use struct regmap_range_cfg so the paged register accesses are being > done by the regmap code itself? > In theory that might work, but regmap does not permit a selector register to be part of another range. The first range would be the non-volatile registers, and the selector register is part of that for all ranges. I tried the following ranges configuration. static const struct regmap_range_cfg spd5118_regmap_range_cfg[] = { { .selector_reg = SPD5118_REG_I2C_LEGACY_MODE, .selector_mask = SPD5118_LEGACY_PAGE_MASK, .selector_shift = 0, .window_start = 0, .window_len = SPD5118_PAGE_SIZE, .range_min = 0, .range_max = SPD5118_PAGE_SIZE - 1, }, { .selector_reg = SPD5118_REG_I2C_LEGACY_MODE, .selector_mask = SPD5118_LEGACY_PAGE_MASK, .selector_shift = 0, .window_start = SPD5118_PAGE_SIZE, .window_len = SPD5118_PAGE_SIZE, .range_min = SPD5118_PAGE_SIZE, .range_max = 9 * SPD5118_PAGE_SIZE - 1, }, }; This results in spd5118 0-0050: Range 0: selector for 1 in window spd5118 0-0050: error -EINVAL: regmap init failed If you have an idea how to configure the ranges differently, please let me know. Thanks, Guenter
Am 16.06.24 um 22:26 schrieb Guenter Roeck: > Hi Armin, > > On 6/16/24 11:09, Armin Wolf wrote: >> Am 14.06.24 um 20:59 schrieb Guenter Roeck: >> >>> The SPD5118 specification says, in its documentation of the page bits >>> in the MR11 register: >>> >>> " >>> This register only applies to non-volatile memory (1024) Bytes) >>> access of >>> SPD5 Hub device. >>> For volatile memory access, this register must be programmed to '000'. >>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ >>> " >>> >>> Renesas/ITD SPD5118 hub controllers take this literally and disable >>> access >>> to volatile memory if the page selected in MR11 is != 0. Since the >>> BIOS or >>> ROMMON will access the non-volatile memory and likely select a page >>> != 0, >>> this means that the driver will not instantiate since it can not >>> identify >>> the chip. Even if the driver instantiates, access to volatile registers >>> is blocked after a nvram read operation which selects a page other >>> than 0. >>> >>> To solve the problem, add initialization code to select page 0 during >>> probe. Before doing that, use basic validation to ensure that this is >>> really a SPD5118 device and not some random EEPROM. Explicitly select >>> page 0 when accessing the volatile register space, and protect volatile >>> register access against nvmem access using the device mutex. >> >> Hi, >> >> maybe we can use struct regmap_range_cfg so the paged register >> accesses are being >> done by the regmap code itself? >> > > In theory that might work, but regmap does not permit a selector > register to > be part of another range. The first range would be the non-volatile > registers, > and the selector register is part of that for all ranges. > > I tried the following ranges configuration. > > static const struct regmap_range_cfg spd5118_regmap_range_cfg[] = { > { > .selector_reg = SPD5118_REG_I2C_LEGACY_MODE, > .selector_mask = SPD5118_LEGACY_PAGE_MASK, > .selector_shift = 0, > .window_start = 0, > .window_len = SPD5118_PAGE_SIZE, > .range_min = 0, > .range_max = SPD5118_PAGE_SIZE - 1, > }, > { > .selector_reg = SPD5118_REG_I2C_LEGACY_MODE, > .selector_mask = SPD5118_LEGACY_PAGE_MASK, > .selector_shift = 0, > .window_start = SPD5118_PAGE_SIZE, > .window_len = SPD5118_PAGE_SIZE, > .range_min = SPD5118_PAGE_SIZE, > .range_max = 9 * SPD5118_PAGE_SIZE - 1, > }, > }; > > This results in > > spd5118 0-0050: Range 0: selector for 1 in window > spd5118 0-0050: error -EINVAL: regmap init failed > > If you have an idea how to configure the ranges differently, > please let me know. > > Thanks, > Guenter > Oh, i did not think of this. In this case we indeed cannot use regmap here. I will test the patch tomorrow. Thanks, Armin Wolf
On Mon, Jun 17, 2024 at 12:50:41AM +0200, Armin Wolf wrote: [ ... ] > > > > This results in > > > > spd5118 0-0050: Range 0: selector for 1 in window > > spd5118 0-0050: error -EINVAL: regmap init failed > > > > If you have an idea how to configure the ranges differently, > > please let me know. > > > > Thanks, > > Guenter > > > Oh, i did not think of this. In this case we indeed cannot use regmap here. I will test the patch tomorrow. > That would be great. As for using regmap for paging, it actually works if I remove the selector restrictions. I'll try to get the restrictions removed or relaxed, but that will take some time. I'd like to keep this patch separate from that effort. If it succeeds, I'll send a follow-up patch to introduce regmap based paging. Thanks, Guenter
diff --git a/drivers/hwmon/spd5118.c b/drivers/hwmon/spd5118.c index ac94a6779360..96052ef4256b 100644 --- a/drivers/hwmon/spd5118.c +++ b/drivers/hwmon/spd5118.c @@ -74,7 +74,7 @@ static const unsigned short normal_i2c[] = { struct spd5118_data { struct regmap *regmap; - struct mutex nvmem_lock; + struct mutex access_lock; }; /* hwmon */ @@ -92,6 +92,29 @@ static u16 spd5118_temp_to_reg(long temp) return (DIV_ROUND_CLOSEST(temp, SPD5118_TEMP_UNIT) & 0x7ff) << 2; } +static int spd5118_set_page(struct regmap *regmap, int page) +{ + unsigned int old_page; + int err; + + err = regmap_read(regmap, SPD5118_REG_I2C_LEGACY_MODE, &old_page); + if (err) + return err; + + if (page != (old_page & SPD5118_LEGACY_MODE_MASK)) { + /* Update page and explicitly select 1-byte addressing */ + err = regmap_update_bits(regmap, SPD5118_REG_I2C_LEGACY_MODE, + SPD5118_LEGACY_MODE_MASK, page); + if (err) + return err; + + /* Selected new NVMEM page, drop cached data */ + regcache_drop_region(regmap, SPD5118_EEPROM_BASE, 0xff); + } + + return 0; +} + static int spd5118_read_temp(struct regmap *regmap, u32 attr, long *val) { int reg, err; @@ -174,28 +197,44 @@ static int spd5118_read_enable(struct regmap *regmap, long *val) static int spd5118_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { - struct regmap *regmap = dev_get_drvdata(dev); + struct spd5118_data *data = dev_get_drvdata(dev); + struct regmap *regmap = data->regmap; + int err; if (type != hwmon_temp) return -EOPNOTSUPP; + mutex_lock(&data->access_lock); + + err = spd5118_set_page(regmap, 0); + if (err) + goto unlock; + switch (attr) { case hwmon_temp_input: case hwmon_temp_max: case hwmon_temp_min: case hwmon_temp_crit: case hwmon_temp_lcrit: - return spd5118_read_temp(regmap, attr, val); + err = spd5118_read_temp(regmap, attr, val); + break; case hwmon_temp_max_alarm: case hwmon_temp_min_alarm: case hwmon_temp_crit_alarm: case hwmon_temp_lcrit_alarm: - return spd5118_read_alarm(regmap, attr, val); + err = spd5118_read_alarm(regmap, attr, val); + break; case hwmon_temp_enable: - return spd5118_read_enable(regmap, val); + err = spd5118_read_enable(regmap, val); + break; default: - return -EOPNOTSUPP; + err = -EOPNOTSUPP; + break; } + +unlock: + mutex_unlock(&data->access_lock); + return err; } static int spd5118_write_temp(struct regmap *regmap, u32 attr, long val) @@ -256,14 +295,28 @@ static int spd5118_temp_write(struct regmap *regmap, u32 attr, long val) static int spd5118_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long val) { - struct regmap *regmap = dev_get_drvdata(dev); + struct spd5118_data *data = dev_get_drvdata(dev); + struct regmap *regmap = data->regmap; + int err; + + mutex_lock(&data->access_lock); + + err = spd5118_set_page(regmap, 0); + if (err) + goto unlock; switch (type) { case hwmon_temp: - return spd5118_temp_write(regmap, attr, val); + err = spd5118_temp_write(regmap, attr, val); + break; default: - return -EOPNOTSUPP; + err = -EOPNOTSUPP; + break; } + +unlock: + mutex_unlock(&data->access_lock); + return err; } static umode_t spd5118_is_visible(const void *_data, enum hwmon_sensor_types type, @@ -382,35 +435,12 @@ static const struct hwmon_chip_info spd5118_chip_info = { /* nvmem */ -static int spd5118_nvmem_set_page(struct regmap *regmap, int page) -{ - unsigned int old_page; - int err; - - err = regmap_read(regmap, SPD5118_REG_I2C_LEGACY_MODE, &old_page); - if (err) - return err; - - if (page != (old_page & SPD5118_LEGACY_MODE_MASK)) { - /* Update page and explicitly select 1-byte addressing */ - err = regmap_update_bits(regmap, SPD5118_REG_I2C_LEGACY_MODE, - SPD5118_LEGACY_MODE_MASK, page); - if (err) - return err; - - /* Selected new NVMEM page, drop cached data */ - regcache_drop_region(regmap, SPD5118_EEPROM_BASE, 0xff); - } - - return 0; -} - static ssize_t spd5118_nvmem_read_page(struct regmap *regmap, char *buf, unsigned int offset, size_t count) { int err; - err = spd5118_nvmem_set_page(regmap, offset >> SPD5118_PAGE_SHIFT); + err = spd5118_set_page(regmap, offset >> SPD5118_PAGE_SHIFT); if (err) return err; @@ -439,19 +469,19 @@ static int spd5118_nvmem_read(void *priv, unsigned int off, void *val, size_t co if (off + count > SPD5118_EEPROM_SIZE) return -EINVAL; - mutex_lock(&data->nvmem_lock); + mutex_lock(&data->access_lock); while (count) { ret = spd5118_nvmem_read_page(data->regmap, buf, off, count); if (ret < 0) { - mutex_unlock(&data->nvmem_lock); + mutex_unlock(&data->access_lock); return ret; } buf += ret; off += ret; count -= ret; } - mutex_unlock(&data->nvmem_lock); + mutex_unlock(&data->access_lock); return 0; } @@ -524,15 +554,65 @@ static const struct regmap_config spd5118_regmap_config = { .cache_type = REGCACHE_MAPLE, }; +static int spd5118_init(struct i2c_client *client) +{ + struct i2c_adapter *adapter = client->adapter; + int err, regval, mode; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE); + if (regval < 0 || (regval && regval != 0x5118)) + return -ENODEV; + + /* + * If the type register returns 0, it is possible that the chip has a + * non-zero page selected and takes the specification literally, i.e. + * disables access to volatile registers besides the page register if + * the page is not 0. Try to identify such chips. + */ + if (!regval) { + mode = i2c_smbus_read_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE); + if (mode < 0 || (mode & 0xf0) || !(mode & 0x07)) + return -ENODEV; + + err = i2c_smbus_write_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE, 0); + if (err) + return -ENODEV; + + regval = i2c_smbus_read_word_swapped(client, SPD5118_REG_TYPE); + if (regval != 0x5118) { + i2c_smbus_write_byte_data(client, SPD5118_REG_I2C_LEGACY_MODE, mode); + return -ENODEV; + } + } + + regval = i2c_smbus_read_byte_data(client, SPD5118_REG_CAPABILITY); + if (regval < 0) + return -ENODEV; + + if (!(regval & SPD5118_CAP_TS_SUPPORT)) + return -ENODEV; + + /* We are reasonably sure that this is really a SPD5118 hub controller */ + return 0; +} + static int spd5118_probe(struct i2c_client *client) { struct device *dev = &client->dev; - unsigned int regval, revision, vendor, bank; + unsigned int revision, vendor, bank; struct spd5118_data *data; struct device *hwmon_dev; struct regmap *regmap; int err; + err = spd5118_init(client); + if (err) + return err; + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; @@ -541,12 +621,6 @@ static int spd5118_probe(struct i2c_client *client) if (IS_ERR(regmap)) return dev_err_probe(dev, PTR_ERR(regmap), "regmap init failed\n"); - err = regmap_read(regmap, SPD5118_REG_CAPABILITY, ®val); - if (err) - return err; - if (!(regval & SPD5118_CAP_TS_SUPPORT)) - return -ENODEV; - err = regmap_read(regmap, SPD5118_REG_REVISION, &revision); if (err) return err; @@ -561,7 +635,7 @@ static int spd5118_probe(struct i2c_client *client) return -ENODEV; data->regmap = regmap; - mutex_init(&data->nvmem_lock); + mutex_init(&data->access_lock); dev_set_drvdata(dev, data); err = spd5118_nvmem_init(dev, data); @@ -572,7 +646,7 @@ static int spd5118_probe(struct i2c_client *client) } hwmon_dev = devm_hwmon_device_register_with_info(dev, "spd5118", - regmap, &spd5118_chip_info, + data, &spd5118_chip_info, NULL); if (IS_ERR(hwmon_dev)) return PTR_ERR(hwmon_dev);
The SPD5118 specification says, in its documentation of the page bits in the MR11 register: " This register only applies to non-volatile memory (1024) Bytes) access of SPD5 Hub device. For volatile memory access, this register must be programmed to '000'. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ " Renesas/ITD SPD5118 hub controllers take this literally and disable access to volatile memory if the page selected in MR11 is != 0. Since the BIOS or ROMMON will access the non-volatile memory and likely select a page != 0, this means that the driver will not instantiate since it can not identify the chip. Even if the driver instantiates, access to volatile registers is blocked after a nvram read operation which selects a page other than 0. To solve the problem, add initialization code to select page 0 during probe. Before doing that, use basic validation to ensure that this is really a SPD5118 device and not some random EEPROM. Explicitly select page 0 when accessing the volatile register space, and protect volatile register access against nvmem access using the device mutex. Cc: Sasha Kozachuk <skozachuk@google.com> Cc: John Hamrick <johnham@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- This patch depends on the spd5118 patch series submitted earlier. RFT: I was only able to test this patch with DDR5 using the Montage Technology SPD5118 hub controller. It needs testing with the Renesas hub controller, and could use some additional testing with other DIMMs. drivers/hwmon/spd5118.c | 164 +++++++++++++++++++++++++++++----------- 1 file changed, 119 insertions(+), 45 deletions(-)