| Message ID | 20240618-dev-mule-i2c-mux-v4-3-5462d28354c8@cherry.de (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | Add Mule MFD support | expand |
On Tue, Jun 18, 2024 at 06:06:45PM +0200, Farouk Bouabid wrote: > Mule is an MCU that emulates a set of I2C devices, among which an amc6821 > device and an I2C mux that exposes more emulated devices. These two devices > share the same I2C address. Only the I2C mux uses register (0xff) as a > config register. Everywhere (or the first place in any section (subject, commit msg, title, description, etc.) you say 'mule' I think should be preceeded with the vendor because 'mule' has no meaning on its own unless we are talking animals. > > Add dt-binding support for the Mule I2C multi-function device. > > Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de> > --- > .../devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml | 48 +++++++++++++ > .../devicetree/bindings/mfd/tsd,mule.yaml | 82 ++++++++++++++++++++++ > 2 files changed, 130 insertions(+) > > diff --git a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml > new file mode 100644 > index 000000000000..ac9dfc936272 > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/i2c/tsd,mule-i2c-mux.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mule I2C multiplexer > + > +maintainers: > + - Farouk Bouabid <farouk.bouabid@cherry.de> > + - Quentin Schulz <quentin.schulz@cherry.de> > + > +description: | > + This module is part of the Mule I2C multi-function device. For more > + details see ../mfd/tsd,mule.yaml. > + > + Mule I2C-mux configures the active device that can be accessed on address > + 0x6f through the config register. > + > + +--------------------------------------------------+ > + | Mule | > + 0x18| +---------------+ | > + -------->|Config register|----+ | > + | +---------------+ | | > + | V_ | > + | | \ +--------+ | > + | | \-------->| dev #0 | | > + | | | +--------+ | > + 0x6f| | M |-------->| dev #1 | | > + ---------------------------->| U | +--------+ | > + | | X |-------->| dev #2 | | > + | | | +--------+ | > + | | /-------->| dev #3 | | > + | |__/ +--------+ | > + +--------------------------------------------------+ > + > + > +allOf: > + - $ref: /schemas/i2c/i2c-mux.yaml# > + > +properties: > + compatible: > + const: tsd,mule-i2c-mux > + > +required: > + - compatible > + > +unevaluatedProperties: false > diff --git a/Documentation/devicetree/bindings/mfd/tsd,mule.yaml b/Documentation/devicetree/bindings/mfd/tsd,mule.yaml > new file mode 100644 > index 000000000000..ab532340a17c > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/tsd,mule.yaml > @@ -0,0 +1,82 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/tsd,mule.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mule I2C multi function device > + > +maintainers: > + - Farouk Bouabid <farouk.bouabid@cherry.de> > + - Quentin Schulz <quentin.schulz@cherry.de> > + > +description: > + Mule is an MCU that emulates a set of I2C devices, among which an amc6821 > + device and an I2C mux that exposes more emulated devices. These two devices > + share the same I2C address. Only the I2C mux uses register (0xff) as a config > + register. > + > +properties: > + compatible: > + const: tsd,mule > + > + reg: > + maxItems: 1 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +patternProperties: > + "^fan(@[0-9a-f]+)?$": > + $ref: /schemas/trivial-devices.yaml That doesn't really define which device. You should do something like this: additionalProperties: true properties: compatible: contains: const: ti,amc6821 If the compatible is correct, then the schema for it will be applied separately. > + > + "^i2c-mux(@[0-9a-f]+)?$": > + $ref: /schemas/i2c/tsd,mule-i2c-mux.yaml > + > +required: > + - "#address-cells" > + - "#size-cells" > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + mule@18 { > + compatible = "tsd,mule"; > + reg = <0x18>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + fan@18 { > + compatible = "ti,amc6821"; > + reg = <0x18>; > + }; > + > + i2c-mux { > + compatible = "tsd,mule-i2c-mux"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + i2c@0 { > + reg = <0x0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + rtc@6f { > + compatible = "isil,isl1208"; > + reg = <0x6f>; > + }; > + }; > + }; > + }; > + }; > +... > > -- > 2.34.1 >
diff --git a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml new file mode 100644 index 000000000000..ac9dfc936272 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/tsd,mule-i2c-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mule I2C multiplexer + +maintainers: + - Farouk Bouabid <farouk.bouabid@cherry.de> + - Quentin Schulz <quentin.schulz@cherry.de> + +description: | + This module is part of the Mule I2C multi-function device. For more + details see ../mfd/tsd,mule.yaml. + + Mule I2C-mux configures the active device that can be accessed on address + 0x6f through the config register. + + +--------------------------------------------------+ + | Mule | + 0x18| +---------------+ | + -------->|Config register|----+ | + | +---------------+ | | + | V_ | + | | \ +--------+ | + | | \-------->| dev #0 | | + | | | +--------+ | + 0x6f| | M |-------->| dev #1 | | + ---------------------------->| U | +--------+ | + | | X |-------->| dev #2 | | + | | | +--------+ | + | | /-------->| dev #3 | | + | |__/ +--------+ | + +--------------------------------------------------+ + + +allOf: + - $ref: /schemas/i2c/i2c-mux.yaml# + +properties: + compatible: + const: tsd,mule-i2c-mux + +required: + - compatible + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/mfd/tsd,mule.yaml b/Documentation/devicetree/bindings/mfd/tsd,mule.yaml new file mode 100644 index 000000000000..ab532340a17c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tsd,mule.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/tsd,mule.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mule I2C multi function device + +maintainers: + - Farouk Bouabid <farouk.bouabid@cherry.de> + - Quentin Schulz <quentin.schulz@cherry.de> + +description: + Mule is an MCU that emulates a set of I2C devices, among which an amc6821 + device and an I2C mux that exposes more emulated devices. These two devices + share the same I2C address. Only the I2C mux uses register (0xff) as a config + register. + +properties: + compatible: + const: tsd,mule + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^fan(@[0-9a-f]+)?$": + $ref: /schemas/trivial-devices.yaml + + "^i2c-mux(@[0-9a-f]+)?$": + $ref: /schemas/i2c/tsd,mule-i2c-mux.yaml + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + mule@18 { + compatible = "tsd,mule"; + reg = <0x18>; + #address-cells = <1>; + #size-cells = <0>; + + fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + }; + + i2c-mux { + compatible = "tsd,mule-i2c-mux"; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; + }; + }; + }; + }; +...
Mule is an MCU that emulates a set of I2C devices, among which an amc6821 device and an I2C mux that exposes more emulated devices. These two devices share the same I2C address. Only the I2C mux uses register (0xff) as a config register. Add dt-binding support for the Mule I2C multi-function device. Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de> --- .../devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml | 48 +++++++++++++ .../devicetree/bindings/mfd/tsd,mule.yaml | 82 ++++++++++++++++++++++ 2 files changed, 130 insertions(+)