@@ -144,6 +144,11 @@ static int lm95234_temp_write(struct device *dev, u32 attr, int channel, long va
struct regmap *regmap = data->regmap;
switch (attr) {
+ case hwmon_temp_enable:
+ if (val && val != 1)
+ return -EINVAL;
+ return regmap_update_bits(regmap, LM95234_REG_ENABLE,
+ BIT(channel), val ? BIT(channel) : 0);
case hwmon_temp_type:
if (val != 1 && val != 2)
return -EINVAL;
@@ -183,6 +188,12 @@ static int lm95234_temp_read(struct device *dev, u32 attr, int channel, long *va
int ret;
switch (attr) {
+ case hwmon_temp_enable:
+ ret = regmap_read(regmap, LM95234_REG_ENABLE, ®val);
+ if (ret)
+ return ret;
+ *val = !!(regval & BIT(channel));
+ break;
case hwmon_temp_input:
return lm95234_read_temp(regmap, channel, val);
case hwmon_temp_max_alarm:
@@ -331,6 +342,7 @@ static umode_t lm95234_is_visible(const void *_data, enum hwmon_sensor_types typ
case hwmon_temp_fault:
return channel ? 0444 : 0;
case hwmon_temp_max:
+ case hwmon_temp_enable:
return 0644;
case hwmon_temp_max_hyst:
return channel ? 0444 : 0644;
@@ -350,21 +362,21 @@ static const struct hwmon_channel_info * const lm95234_info[] = {
HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
- HWMON_T_MAX_ALARM,
+ HWMON_T_MAX_ALARM | HWMON_T_ENABLE,
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
HWMON_T_MAX_ALARM | HWMON_T_FAULT | HWMON_T_TYPE |
HWMON_T_CRIT | HWMON_T_CRIT_HYST |
- HWMON_T_CRIT_ALARM | HWMON_T_OFFSET,
+ HWMON_T_CRIT_ALARM | HWMON_T_OFFSET | HWMON_T_ENABLE,
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
HWMON_T_MAX_ALARM | HWMON_T_FAULT | HWMON_T_TYPE |
HWMON_T_CRIT | HWMON_T_CRIT_HYST |
- HWMON_T_CRIT_ALARM | HWMON_T_OFFSET,
+ HWMON_T_CRIT_ALARM | HWMON_T_OFFSET | HWMON_T_ENABLE,
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
HWMON_T_MAX_ALARM | HWMON_T_FAULT | HWMON_T_TYPE |
- HWMON_T_OFFSET,
+ HWMON_T_OFFSET | HWMON_T_ENABLE,
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
HWMON_T_MAX_ALARM | HWMON_T_FAULT | HWMON_T_TYPE |
- HWMON_T_OFFSET),
+ HWMON_T_OFFSET | HWMON_T_ENABLE),
NULL
};
LM95233/LM95234 support enabling temperature channels one by one. Add support for tempX_enable attribute to be able to use that functionality. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- drivers/hwmon/lm95234.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)