@@ -1511,6 +1511,7 @@ config SENSORS_LM90
config SENSORS_LM92
tristate "National Semiconductor LM92 and compatibles"
depends on I2C
+ select REGMAP_I2C
help
If you say yes here you get support for National Semiconductor LM92
and Maxim MAX6635 sensor chips.
@@ -32,9 +32,9 @@
#include <linux/hwmon-sysfs.h>
#include <linux/i2c.h>
#include <linux/init.h>
-#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
/*
@@ -81,65 +81,40 @@ enum temp_index {
t_crit,
t_min,
t_max,
- t_hyst,
t_num_regs
};
-static const u8 regs[t_num_regs] = {
+static const u8 lm92_regs[t_num_regs] = {
[t_input] = LM92_REG_TEMP,
[t_crit] = LM92_REG_TEMP_CRIT,
[t_min] = LM92_REG_TEMP_LOW,
[t_max] = LM92_REG_TEMP_HIGH,
- [t_hyst] = LM92_REG_TEMP_HYST,
};
/* Client data (each client gets its own) */
struct lm92_data {
- struct i2c_client *client;
+ struct regmap *regmap;
struct mutex update_lock;
int resolution;
- bool valid; /* false until following fields are valid */
- unsigned long last_updated; /* in jiffies */
-
- /* registers values */
- s16 temp[t_num_regs]; /* index with enum temp_index */
};
/*
* Sysfs attributes and callback functions
*/
-static struct lm92_data *lm92_update_device(struct device *dev)
-{
- struct lm92_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
- int i;
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + HZ) ||
- !data->valid) {
- dev_dbg(&client->dev, "Updating lm92 data\n");
- for (i = 0; i < t_num_regs; i++) {
- data->temp[i] =
- i2c_smbus_read_word_swapped(client, regs[i]);
- }
- data->last_updated = jiffies;
- data->valid = true;
- }
-
- mutex_unlock(&data->update_lock);
-
- return data;
-}
-
static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct lm92_data *data = lm92_update_device(dev);
+ struct lm92_data *data = dev_get_drvdata(dev);
+ u32 temp;
+ int err;
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
+ err = regmap_read(data->regmap, lm92_regs[attr->index], &temp);
+ if (err)
+ return err;
+
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(temp));
}
static ssize_t temp_store(struct device *dev,
@@ -148,7 +123,7 @@ static ssize_t temp_store(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct lm92_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
+ struct regmap *regmap = data->regmap;
int nr = attr->index;
long val;
int err;
@@ -157,10 +132,9 @@ static ssize_t temp_store(struct device *dev,
if (err)
return err;
- mutex_lock(&data->update_lock);
- data->temp[nr] = TEMP_TO_REG(val, data->resolution);
- i2c_smbus_write_word_swapped(client, regs[nr], data->temp[nr]);
- mutex_unlock(&data->update_lock);
+ err = regmap_write(regmap, lm92_regs[nr], TEMP_TO_REG(val, data->resolution));
+ if (err)
+ return err;
return count;
}
@@ -168,28 +142,42 @@ static ssize_t temp_hyst_show(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct lm92_data *data = lm92_update_device(dev);
+ u32 regs[2] = { lm92_regs[attr->index], LM92_REG_TEMP_HYST };
+ struct lm92_data *data = dev_get_drvdata(dev);
+ u16 regvals[2];
+ int err;
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])
- - TEMP_FROM_REG(data->temp[t_hyst]));
+ err = regmap_multi_reg_read(data->regmap, regs, regvals, 2);
+ if (err)
+ return err;
+
+ return sprintf(buf, "%d\n",
+ TEMP_FROM_REG(regvals[0]) - TEMP_FROM_REG(regvals[1]));
}
static ssize_t temp1_min_hyst_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct lm92_data *data = lm92_update_device(dev);
+ static u32 regs[2] = { LM92_REG_TEMP_LOW, LM92_REG_TEMP_HYST };
+ struct lm92_data *data = dev_get_drvdata(dev);
+ u16 regvals[2];
+ int err;
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[t_min])
- + TEMP_FROM_REG(data->temp[t_hyst]));
+ err = regmap_multi_reg_read(data->regmap, regs, regvals, 2);
+ if (err)
+ return err;
+
+ return sprintf(buf, "%d\n",
+ TEMP_FROM_REG(regvals[0]) + TEMP_FROM_REG(regvals[1]));
}
static ssize_t temp_hyst_store(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct lm92_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
+ struct regmap *regmap = data->regmap;
+ u32 temp;
long val;
int err;
@@ -199,29 +187,45 @@ static ssize_t temp_hyst_store(struct device *dev,
val = clamp_val(val, -120000, 220000);
mutex_lock(&data->update_lock);
- data->temp[t_hyst] =
- TEMP_TO_REG(TEMP_FROM_REG(data->temp[attr->index]) - val,
- data->resolution);
- i2c_smbus_write_word_swapped(client, LM92_REG_TEMP_HYST,
- data->temp[t_hyst]);
+ err = regmap_read(regmap, LM92_REG_TEMP_CRIT, &temp);
+ if (err)
+ goto unlock;
+ val = TEMP_TO_REG(TEMP_FROM_REG(temp) - val, data->resolution);
+ err = regmap_write(regmap, LM92_REG_TEMP_HYST, val);
+unlock:
mutex_unlock(&data->update_lock);
+ if (err)
+ return err;
return count;
}
static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct lm92_data *data = lm92_update_device(dev);
+ struct lm92_data *data = dev_get_drvdata(dev);
+ u32 temp;
+ int err;
- return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp[t_input]));
+ err = regmap_read(data->regmap, LM92_REG_TEMP, &temp);
+ if (err)
+ return err;
+
+ return sprintf(buf, "%d\n", ALARMS_FROM_REG(temp));
}
static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
+ struct lm92_data *data = dev_get_drvdata(dev);
int bitnr = to_sensor_dev_attr(attr)->index;
- struct lm92_data *data = lm92_update_device(dev);
- return sprintf(buf, "%d\n", (data->temp[t_input] >> bitnr) & 1);
+ u32 temp;
+ int err;
+
+ err = regmap_read(data->regmap, LM92_REG_TEMP, &temp);
+ if (err)
+ return err;
+
+ return sprintf(buf, "%d\n", (temp >> bitnr) & 1);
}
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input);
@@ -240,15 +244,9 @@ static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 1);
* Detection and registration
*/
-static void lm92_init_client(struct i2c_client *client)
+static int lm92_init_client(struct regmap *regmap)
{
- u8 config;
-
- /* Start the conversions if needed */
- config = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG);
- if (config & 0x01)
- i2c_smbus_write_byte_data(client, LM92_REG_CONFIG,
- config & 0xFE);
+ return regmap_clear_bits(regmap, LM92_REG_CONFIG, 0x01);
}
static struct attribute *lm92_attrs[] = {
@@ -300,25 +298,83 @@ static int lm92_detect(struct i2c_client *new_client,
return 0;
}
-static int lm92_probe(struct i2c_client *new_client)
+/* regmap */
+
+static int lm92_reg_read(void *context, unsigned int reg, unsigned int *val)
{
+ int ret;
+
+ if (reg == LM92_REG_CONFIG)
+ ret = i2c_smbus_read_byte_data(context, reg);
+ else
+ ret = i2c_smbus_read_word_swapped(context, reg);
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+ return 0;
+}
+
+static int lm92_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+ if (reg == LM92_REG_CONFIG)
+ return i2c_smbus_write_byte_data(context, LM92_REG_CONFIG, val);
+
+ return i2c_smbus_write_word_swapped(context, reg, val);
+}
+
+static bool lm92_regmap_is_volatile(struct device *dev, unsigned int reg)
+{
+ return reg == LM92_REG_TEMP;
+}
+
+static bool lm92_regmap_is_writeable(struct device *dev, unsigned int reg)
+{
+ return reg >= LM92_REG_CONFIG;
+}
+
+static const struct regmap_config lm92_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = LM92_REG_TEMP_HIGH,
+ .cache_type = REGCACHE_MAPLE,
+ .volatile_reg = lm92_regmap_is_volatile,
+ .writeable_reg = lm92_regmap_is_writeable,
+};
+
+static const struct regmap_bus lm92_regmap_bus = {
+ .reg_write = lm92_reg_write,
+ .reg_read = lm92_reg_read,
+};
+
+static int lm92_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
struct device *hwmon_dev;
struct lm92_data *data;
+ struct regmap *regmap;
+ int err;
- data = devm_kzalloc(&new_client->dev, sizeof(struct lm92_data),
- GFP_KERNEL);
+ regmap = devm_regmap_init(dev, &lm92_regmap_bus, client,
+ &lm92_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ data = devm_kzalloc(dev, sizeof(struct lm92_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- data->client = new_client;
- data->resolution = (unsigned long)i2c_get_match_data(new_client);
+ data->regmap = regmap;
+ data->resolution = (unsigned long)i2c_get_match_data(client);
mutex_init(&data->update_lock);
/* Initialize the chipset */
- lm92_init_client(new_client);
+ err = lm92_init_client(regmap);
+ if (err)
+ return err;
- hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev,
- new_client->name,
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev,
+ client->name,
data, lm92_groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
Use regmap for local caching and for multi-byte operations to be able to use regmap API functions and to reduce the need for locking in the driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- drivers/hwmon/Kconfig | 1 + drivers/hwmon/lm92.c | 204 +++++++++++++++++++++++++++--------------- 2 files changed, 131 insertions(+), 74 deletions(-)