From patchwork Thu Nov 7 11:47:10 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Stuebner X-Patchwork-Id: 13866271 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 34D0F1EF934; Thu, 7 Nov 2024 11:47:56 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; cv=none; b=Rco6gxgbqclblr2lUOeT2bUqq57LUevY6EFybZxj6wQbCxmDallgPUIEXMyFGX5niI0jSAHtIJhnbDLyvpLpA43QTLDb7lOnNiET98bKDOiAyjqmXvBmnd3gy2jt9fwDGBv+2UY2oH/hO/j7J0DnaKofriirKqtkIaqsqjsrxHo= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1730980078; c=relaxed/simple; bh=nr3hhchgbJXU3zKrI1mTUMWVwAV8/ckc/EyxldarVYQ=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=NY7p64+1T0Ydy23XScezo2ZWCGO4PHjiedPNQVuYj7dGYQoI2HKaR5XzxN2dgjoU7DNhExt1QAxvvRBxEtquR6l+kFdx/Vsufpt/6Otvr+gHPtXvmUkR58srdeUX3FjhaxKUuIq5xQPHSAhKEuzkDSINmCNGH8wgYPBf2Cq0c0Q= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=nc1xACRM; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="nc1xACRM" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=jC0GDxJY4SJFyWBJ52PjtrRBRAUKVurzeGeMP459lcU=; b=nc1xACRM+sGtq+lREzqlVPG/Fk owQXDgv8tcb9f7Tghm4yFf6mfXYWaTPJ+RuJI0RXk/riYJloo3LiccNMuoliVj8Jo/JQc7Nk3yN4v GvOQ5SmFqvV4wsW8gG8g4svGdOYaqcUhsFxxrZowEa9Ybg74gjxQE/w+j+9Tzc4/IRlg2z0vnoHfB ttnaw+h5VLDUNEa42a9WiwtuhfF6CH99m/d+ozuRoH0YLLzeRRNndZzuzhonX5KjoZj5IxJRqcD9B dzrhOKXUhVRh1VxYY0yH1FKHpMWHcWKPuiUPrp0w8JwOpqxNf1M5i7JsxpOo3UgzMqiwOnQ+o5T5E lHQgRO8w==; Received: from i53875b28.versanet.de ([83.135.91.40] helo=localhost.localdomain) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1t90z3-0005lF-O7; Thu, 07 Nov 2024 12:47:29 +0100 From: Heiko Stuebner To: lee@kernel.org, jikos@kernel.org, jic23@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, srinivas.pandruvada@linux.intel.com, bentiss@kernel.org, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-iio@vger.kernel.org, linux-leds@vger.kernel.org, heiko@sntech.de Subject: [PATCH v9 7/9] hwmon: add driver for the hwmon parts of qnap-mcu devices Date: Thu, 7 Nov 2024 12:47:10 +0100 Message-ID: <20241107114712.538976-8-heiko@sntech.de> X-Mailer: git-send-email 2.45.2 In-Reply-To: <20241107114712.538976-1-heiko@sntech.de> References: <20241107114712.538976-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-hwmon@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The MCU can be found on network-attached-storage devices made by QNAP and provides access to fan control including reading back its RPM as well as reading the temperature of the NAS case. Acked-by: Guenter Roeck Signed-off-by: Heiko Stuebner --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/qnap-mcu-hwmon.rst | 27 ++ MAINTAINERS | 1 + drivers/hwmon/Kconfig | 12 + drivers/hwmon/Makefile | 1 + drivers/hwmon/qnap-mcu-hwmon.c | 364 +++++++++++++++++++++++++ 6 files changed, 406 insertions(+) create mode 100644 Documentation/hwmon/qnap-mcu-hwmon.rst create mode 100644 drivers/hwmon/qnap-mcu-hwmon.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index ea3b5be8fe4f..e134a4f8558f 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -199,6 +199,7 @@ Hardware Monitoring Kernel Drivers pxe1610 pwm-fan q54sj108a2 + qnap-mcu-hwmon raspberrypi-hwmon sbrmi sbtsi_temp diff --git a/Documentation/hwmon/qnap-mcu-hwmon.rst b/Documentation/hwmon/qnap-mcu-hwmon.rst new file mode 100644 index 000000000000..83407e3408f2 --- /dev/null +++ b/Documentation/hwmon/qnap-mcu-hwmon.rst @@ -0,0 +1,27 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver qnap-mcu-hwmon +============================ + +This driver enables the use of the hardware monitoring and fan control +of the MCU used on some QNAP network attached storage devices. + +Author: Heiko Stuebner + +Description +----------- + +The driver implements a simple interface for driving the fan controlled by +setting its PWM output value and exposes the fan rpm and case-temperature +to user space through hwmon's sysfs interface. + +The fan rotation speed returned via the optional 'fan1_input' is calculated +inside the MCU device. + +The driver provides the following sensor accesses in sysfs: + +=============== ======= ======================================================= +fan1_input ro fan tachometer speed in RPM +pwm1 rw relative speed (0-255), 255=max. speed. +temp1_input ro Measured temperature in millicelsius +=============== ======= ======================================================= diff --git a/MAINTAINERS b/MAINTAINERS index 9e66441c50da..4e6719d15d75 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18881,6 +18881,7 @@ F: drivers/media/tuners/qm1d1c0042* QNAP MCU DRIVER M: Heiko Stuebner S: Maintained +F: drivers/hwmon/qnap-mcu-hwmon.c F: drivers/input/misc/qnap-mcu-input.c F: drivers/leds/leds-qnap-mcu.c F: drivers/mfd/qnap-mcu.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 08a3c863f80a..74d33a96f7cc 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1800,6 +1800,18 @@ config SENSORS_PWM_FAN This driver can also be built as a module. If so, the module will be called pwm-fan. +config SENSORS_QNAP_MCU_HWMON + tristate "QNAP MCU hardware monitoring" + depends on MFD_QNAP_MCU + depends on THERMAL || THERMAL=n + help + Say yes here to enable support for fan and temperature sensor + connected to a QNAP MCU, as found in a number of QNAP network + attached storage devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-hwmon. + config SENSORS_RASPBERRYPI_HWMON tristate "Raspberry Pi voltage monitor" depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 9554d2fdcf7b..872f70f9902d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -187,6 +187,7 @@ obj-$(CONFIG_SENSORS_POWERZ) += powerz.o obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o obj-$(CONFIG_SENSORS_PT5161L) += pt5161l.o obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o +obj-$(CONFIG_SENSORS_QNAP_MCU_HWMON) += qnap-mcu-hwmon.o obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o obj-$(CONFIG_SENSORS_SBTSI) += sbtsi_temp.o obj-$(CONFIG_SENSORS_SBRMI) += sbrmi.o diff --git a/drivers/hwmon/qnap-mcu-hwmon.c b/drivers/hwmon/qnap-mcu-hwmon.c new file mode 100644 index 000000000000..29057514739c --- /dev/null +++ b/drivers/hwmon/qnap-mcu-hwmon.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Driver for hwmon elements found on QNAP-MCU devices + * + * Copyright (C) 2024 Heiko Stuebner + */ + +#include +#include +#include +#include +#include +#include +#include + +struct qnap_mcu_hwmon { + struct qnap_mcu *mcu; + struct device *dev; + + unsigned int pwm_min; + unsigned int pwm_max; + + struct fwnode_handle *fan_node; + unsigned int fan_state; + unsigned int fan_max_state; + unsigned int *fan_cooling_levels; + + struct thermal_cooling_device *cdev; + struct hwmon_chip_info info; +}; + +static int qnap_mcu_hwmon_get_rpm(struct qnap_mcu_hwmon *hwm) +{ + static const u8 cmd[] = { '@', 'F', 'A' }; + u8 reply[6]; + int ret; + + /* poll the fan rpm */ + ret = qnap_mcu_exec(hwm->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return ret; + + /* First 2 bytes must mirror the sent command */ + if (memcmp(cmd, reply, 2)) + return -EIO; + + return reply[4] * 30; +} + +static int qnap_mcu_hwmon_get_pwm(struct qnap_mcu_hwmon *hwm) +{ + static const u8 cmd[] = { '@', 'F', 'Z', '0' }; /* 0 = fan-id? */ + u8 reply[4]; + int ret; + + /* poll the fan pwm */ + ret = qnap_mcu_exec(hwm->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return ret; + + /* First 3 bytes must mirror the sent command */ + if (memcmp(cmd, reply, 3)) + return -EIO; + + return reply[3]; +} + +static int qnap_mcu_hwmon_set_pwm(struct qnap_mcu_hwmon *hwm, u8 pwm) +{ + const u8 cmd[] = { '@', 'F', 'W', '0', pwm }; /* 0 = fan-id?, pwm 0-255 */ + + /* set the fan pwm */ + return qnap_mcu_exec_with_ack(hwm->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_hwmon_get_temp(struct qnap_mcu_hwmon *hwm) +{ + static const u8 cmd[] = { '@', 'T', '3' }; + u8 reply[4]; + int ret; + + /* poll the fan rpm */ + ret = qnap_mcu_exec(hwm->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return ret; + + /* First bytes must mirror the sent command */ + if (memcmp(cmd, reply, sizeof(cmd))) + return -EIO; + + /* + * There is an unknown bit set in bit7. + * Bits [6:0] report the actual temperature as returned by the + * original qnap firmware-tools, so just drop bit7 for now. + */ + return (reply[3] & 0x7f) * 1000; +} + +static int qnap_mcu_hwmon_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct qnap_mcu_hwmon *hwm = dev_get_drvdata(dev); + + switch (attr) { + case hwmon_pwm_input: + if (val < 0 || val > 255) + return -EINVAL; + + if (val != 0) + val = clamp_val(val, hwm->pwm_min, hwm->pwm_max); + + return qnap_mcu_hwmon_set_pwm(hwm, val); + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int qnap_mcu_hwmon_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct qnap_mcu_hwmon *hwm = dev_get_drvdata(dev); + int ret; + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + ret = qnap_mcu_hwmon_get_pwm(hwm); + if (ret < 0) + return ret; + + *val = ret; + return 0; + default: + return -EOPNOTSUPP; + } + case hwmon_fan: + ret = qnap_mcu_hwmon_get_rpm(hwm); + if (ret < 0) + return ret; + + *val = ret; + return 0; + case hwmon_temp: + ret = qnap_mcu_hwmon_get_temp(hwm); + if (ret < 0) + return ret; + + *val = ret; + return 0; + default: + return -EOPNOTSUPP; + } +} + +static umode_t qnap_mcu_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_temp: + return 0444; + + case hwmon_pwm: + return 0644; + + case hwmon_fan: + return 0444; + + default: + return 0; + } +} + +static const struct hwmon_ops qnap_mcu_hwmon_hwmon_ops = { + .is_visible = qnap_mcu_hwmon_is_visible, + .read = qnap_mcu_hwmon_read, + .write = qnap_mcu_hwmon_write, +}; + +/* thermal cooling device callbacks */ +static int qnap_mcu_hwmon_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct qnap_mcu_hwmon *hwm = cdev->devdata; + + if (!hwm) + return -EINVAL; + + *state = hwm->fan_max_state; + + return 0; +} + +static int qnap_mcu_hwmon_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct qnap_mcu_hwmon *hwm = cdev->devdata; + + if (!hwm) + return -EINVAL; + + *state = hwm->fan_state; + + return 0; +} + +static int qnap_mcu_hwmon_set_cur_state(struct thermal_cooling_device *cdev, + unsigned long state) +{ + struct qnap_mcu_hwmon *hwm = cdev->devdata; + int ret; + + if (!hwm || state > hwm->fan_max_state) + return -EINVAL; + + if (state == hwm->fan_state) + return 0; + + ret = qnap_mcu_hwmon_set_pwm(hwm, hwm->fan_cooling_levels[state]); + if (ret) + return ret; + + hwm->fan_state = state; + + return ret; +} + +static const struct thermal_cooling_device_ops qnap_mcu_hwmon_cooling_ops = { + .get_max_state = qnap_mcu_hwmon_get_max_state, + .get_cur_state = qnap_mcu_hwmon_get_cur_state, + .set_cur_state = qnap_mcu_hwmon_set_cur_state, +}; + +static void devm_fan_node_release(void *data) +{ + struct qnap_mcu_hwmon *hwm = data; + + fwnode_handle_put(hwm->fan_node); +} + +static int qnap_mcu_hwmon_get_cooling_data(struct device *dev, struct qnap_mcu_hwmon *hwm) +{ + struct fwnode_handle *fwnode; + int num, i, ret; + + fwnode = device_get_named_child_node(dev->parent, "fan-0"); + if (!fwnode) + return 0; + + /* if we found the fan-node, we're keeping it until device-unbind */ + hwm->fan_node = fwnode; + ret = devm_add_action_or_reset(dev, devm_fan_node_release, hwm); + if (ret) + return ret; + + num = fwnode_property_count_u32(fwnode, "cooling-levels"); + if (num <= 0) + return dev_err_probe(dev, num ? : -EINVAL, + "Failed to count elements in 'cooling-levels'\n"); + + hwm->fan_cooling_levels = devm_kcalloc(dev, num, sizeof(u32), + GFP_KERNEL); + if (!hwm->fan_cooling_levels) + return -ENOMEM; + + ret = fwnode_property_read_u32_array(fwnode, "cooling-levels", + hwm->fan_cooling_levels, num); + if (ret) + return dev_err_probe(dev, ret, "Failed to read 'cooling-levels'\n"); + + for (i = 0; i < num; i++) { + if (hwm->fan_cooling_levels[i] > hwm->pwm_max) + return dev_err_probe(dev, -EINVAL, "fan state[%d]:%d > %d\n", i, + hwm->fan_cooling_levels[i], hwm->pwm_max); + } + + hwm->fan_max_state = num - 1; + + return 0; +} + +static const struct hwmon_channel_info * const qnap_mcu_hwmon_channels[] = { + HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT), + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT), + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + NULL +}; + +static int qnap_mcu_hwmon_probe(struct platform_device *pdev) +{ + struct qnap_mcu *mcu = dev_get_drvdata(pdev->dev.parent); + const struct qnap_mcu_variant *variant = pdev->dev.platform_data; + struct qnap_mcu_hwmon *hwm; + struct thermal_cooling_device *cdev; + struct device *dev = &pdev->dev; + struct device *hwmon; + int ret; + + hwm = devm_kzalloc(dev, sizeof(*hwm), GFP_KERNEL); + if (!hwm) + return -ENOMEM; + + hwm->mcu = mcu; + hwm->dev = &pdev->dev; + hwm->pwm_min = variant->fan_pwm_min; + hwm->pwm_max = variant->fan_pwm_max; + + platform_set_drvdata(pdev, hwm); + + /* + * Set duty cycle to maximum allowed. + */ + ret = qnap_mcu_hwmon_set_pwm(hwm, hwm->pwm_max); + if (ret) + return ret; + + hwm->info.ops = &qnap_mcu_hwmon_hwmon_ops; + hwm->info.info = qnap_mcu_hwmon_channels; + + ret = qnap_mcu_hwmon_get_cooling_data(dev, hwm); + if (ret) + return ret; + + hwm->fan_state = hwm->fan_max_state; + + hwmon = devm_hwmon_device_register_with_info(dev, "qnapmcu", + hwm, &hwm->info, NULL); + if (IS_ERR(hwmon)) + return dev_err_probe(dev, PTR_ERR(hwmon), "Failed to register hwmon device\n"); + + /* + * Only register cooling device when we found cooling-levels. + * qnap_mcu_hwmon_get_cooling_data() will fail when reading malformed + * levels and only succeed with either no or correct cooling levels. + */ + if (IS_ENABLED(CONFIG_THERMAL) && hwm->fan_cooling_levels) { + cdev = devm_thermal_of_cooling_device_register(dev, + to_of_node(hwm->fan_node), "qnap-mcu-hwmon", + hwm, &qnap_mcu_hwmon_cooling_ops); + if (IS_ERR(cdev)) + return dev_err_probe(dev, PTR_ERR(cdev), + "Failed to register qnap-mcu-hwmon as cooling device\n"); + hwm->cdev = cdev; + } + + return 0; +} + +static struct platform_driver qnap_mcu_hwmon_driver = { + .probe = qnap_mcu_hwmon_probe, + .driver = { + .name = "qnap-mcu-hwmon", + }, +}; +module_platform_driver(qnap_mcu_hwmon_driver); + +MODULE_ALIAS("platform:qnap-mcu-hwmon"); +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("QNAP MCU hwmon driver"); +MODULE_LICENSE("GPL");