@@ -47,19 +47,30 @@ Sysfs entries
======================= ========================================================
curr1_input Total current usage
curr2_input Current on the 12v psu rail
+curr2_crit Current max critical value on the 12v psu rail
curr3_input Current on the 5v psu rail
+curr3_crit Current max critical value on the 5v psu rail
curr4_input Current on the 3.3v psu rail
+curr4_crit Current max critical value on the 3.3v psu rail
fan1_input RPM of psu fan
in0_input Voltage of the psu ac input
in1_input Voltage of the 12v psu rail
+in1_crit Voltage max critical value on the 12v psu rail
+in1_lcrit Voltage min critical value on the 12v psu rail
in2_input Voltage of the 5v psu rail
-in3_input Voltage of the 3.3 psu rail
+in2_crit Voltage max critical value on the 5v psu rail
+in2_lcrit Voltage min critical value on the 5v psu rail
+in3_input Voltage of the 3.3v psu rail
+in3_crit Voltage max critical value on the 3.3v psu rail
+in3_lcrit Voltage min critical value on the 3.3v psu rail
power1_input Total power usage
power2_input Power usage of the 12v psu rail
power3_input Power usage of the 5v psu rail
power4_input Power usage of the 3.3v psu rail
temp1_input Temperature of the psu vrm component
+temp1_crit Temperature max cirtical value of the psu vrm component
temp2_input Temperature of the psu case
+temp2_crit Temperature max critical value of psu case
======================= ========================================================
Usage Notes
@@ -53,11 +53,17 @@
#define CMD_TIMEOUT_MS 250
#define SECONDS_PER_HOUR (60 * 60)
#define SECONDS_PER_DAY (SECONDS_PER_HOUR * 24)
+#define RAIL_COUNT 3 /* 3v3 + 5v + 12v */
+#define TEMP_COUNT 2
#define PSU_CMD_SELECT_RAIL 0x00 /* expects length 2 */
-#define PSU_CMD_IN_VOLTS 0x88 /* the rest of the commands expect length 3 */
+#define PSU_CMD_RAIL_VOLTS_HCRIT 0x40 /* the rest of the commands expect length 3 */
+#define PSU_CMD_RAIL_VOLTS_LCRIT 0x44
+#define PSU_CMD_RAIL_AMPS_HCRIT 0x46
+#define PSU_CMD_TEMP_HCRIT 0x4F
+#define PSU_CMD_IN_VOLTS 0x88
#define PSU_CMD_IN_AMPS 0x89
-#define PSU_CMD_RAIL_OUT_VOLTS 0x8B
+#define PSU_CMD_RAIL_VOLTS 0x8B
#define PSU_CMD_RAIL_AMPS 0x8C
#define PSU_CMD_TEMP0 0x8D
#define PSU_CMD_TEMP1 0x8E
@@ -107,6 +113,21 @@ static const char *const label_amps[] = {
L_AMPS_3_3V
};
+struct corsairpsu_crit_values {
+ long temp_crit[TEMP_COUNT];
+ long in_crit[RAIL_COUNT];
+ long in_lcrit[RAIL_COUNT];
+ long curr_crit[RAIL_COUNT];
+ u8 temp_crit_support;
+ u8 in_crit_support;
+ u8 in_lcrit_support;
+ u8 curr_crit_support;
+};
+
+struct corsairpsu_quirk_commands {
+ u8 in_curr_support;
+};
+
struct corsairpsu_data {
struct hid_device *hdev;
struct device *hwmon_dev;
@@ -116,6 +137,8 @@ struct corsairpsu_data {
u8 *cmd_buffer;
char vendor[REPLY_SIZE];
char product[REPLY_SIZE];
+ struct corsairpsu_crit_values crit_values;
+ struct corsairpsu_quirk_commands quirks;
};
/* some values are SMBus LINEAR11 data which need a conversion */
@@ -193,7 +216,10 @@ static int corsairpsu_request(struct corsairpsu_data *priv, u8 cmd, u8 rail, voi
mutex_lock(&priv->lock);
switch (cmd) {
- case PSU_CMD_RAIL_OUT_VOLTS:
+ case PSU_CMD_RAIL_VOLTS_HCRIT:
+ case PSU_CMD_RAIL_VOLTS_LCRIT:
+ case PSU_CMD_RAIL_AMPS_HCRIT:
+ case PSU_CMD_RAIL_VOLTS:
case PSU_CMD_RAIL_AMPS:
case PSU_CMD_RAIL_WATTS:
ret = corsairpsu_usb_cmd(priv, 2, PSU_CMD_SELECT_RAIL, rail, NULL);
@@ -229,9 +255,13 @@ static int corsairpsu_get_value(struct corsairpsu_data *priv, u8 cmd, u8 rail, l
*/
tmp = ((long)data[3] << 24) + (data[2] << 16) + (data[1] << 8) + data[0];
switch (cmd) {
+ case PSU_CMD_RAIL_VOLTS_HCRIT:
+ case PSU_CMD_RAIL_VOLTS_LCRIT:
+ case PSU_CMD_RAIL_AMPS_HCRIT:
+ case PSU_CMD_TEMP_HCRIT:
case PSU_CMD_IN_VOLTS:
case PSU_CMD_IN_AMPS:
- case PSU_CMD_RAIL_OUT_VOLTS:
+ case PSU_CMD_RAIL_VOLTS:
case PSU_CMD_RAIL_AMPS:
case PSU_CMD_TEMP0:
case PSU_CMD_TEMP1:
@@ -256,75 +286,284 @@ static int corsairpsu_get_value(struct corsairpsu_data *priv, u8 cmd, u8 rail, l
return ret;
}
-static umode_t corsairpsu_hwmon_ops_is_visible(const void *data, enum hwmon_sensor_types type,
- u32 attr, int channel)
+static void corsairpsu_get_criticals(struct corsairpsu_data *priv)
{
- if (type == hwmon_temp && (attr == hwmon_temp_input || attr == hwmon_temp_label))
- return 0444;
- else if (type == hwmon_fan && (attr == hwmon_fan_input || attr == hwmon_fan_label))
- return 0444;
- else if (type == hwmon_power && (attr == hwmon_power_input || attr == hwmon_power_label))
- return 0444;
- else if (type == hwmon_in && (attr == hwmon_in_input || attr == hwmon_in_label))
+ struct corsairpsu_crit_values *crits = &priv->crit_values;
+ long tmp;
+ int rail;
+
+ crits->temp_crit_support = 0;
+ crits->in_crit_support = 0;
+ crits->in_lcrit_support = 0;
+ crits->curr_crit_support = 0;
+
+ for (rail = 0; rail < TEMP_COUNT; ++rail) {
+ if (!corsairpsu_get_value(priv, PSU_CMD_TEMP_HCRIT, rail, &tmp)) {
+ crits->temp_crit_support |= BIT(rail);
+ crits->temp_crit[rail] = tmp;
+ }
+ }
+
+ for (rail = 0; rail < RAIL_COUNT; ++rail) {
+ if (!corsairpsu_get_value(priv, PSU_CMD_RAIL_VOLTS_HCRIT, rail, &tmp)) {
+ crits->in_crit_support |= BIT(rail);
+ crits->in_crit[rail] = tmp;
+ }
+
+ if (!corsairpsu_get_value(priv, PSU_CMD_RAIL_VOLTS_LCRIT, rail, &tmp)) {
+ crits->in_lcrit_support |= BIT(rail);
+ crits->in_lcrit[rail] = tmp;
+ }
+
+ if (!corsairpsu_get_value(priv, PSU_CMD_RAIL_AMPS_HCRIT, rail, &tmp)) {
+ crits->curr_crit_support |= BIT(rail);
+ crits->curr_crit[rail] = tmp;
+ }
+ }
+}
+
+static void corsairpsu_check_quirks(struct corsairpsu_data *priv)
+{
+ struct corsairpsu_quirk_commands *quirks = &priv->quirks;
+ long tmp;
+
+ quirks->in_curr_support = 0;
+
+ if (!corsairpsu_get_value(priv, PSU_CMD_IN_AMPS, 0, &tmp))
+ quirks->in_curr_support = 1;
+}
+
+static umode_t corsairpsu_hwmon_temp_is_visible(const struct corsairpsu_data *priv, u32 attr,
+ int channel)
+{
+ const struct corsairpsu_crit_values *crits = &priv->crit_values;
+ umode_t res = 0444;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ case hwmon_temp_label:
+ case hwmon_temp_crit:
+ if (channel > 0 && !(crits->temp_crit_support & BIT(channel - 1)))
+ res = 0;
+ break;
+ default:
+ break;
+ }
+
+ return res;
+}
+
+static umode_t corsairpsu_hwmon_fan_is_visible(const struct corsairpsu_data *priv, u32 attr,
+ int channel)
+{
+ switch (attr) {
+ case hwmon_fan_input:
+ case hwmon_fan_label:
return 0444;
- else if (type == hwmon_curr && (attr == hwmon_curr_input || attr == hwmon_curr_label))
+ default:
+ return 0;
+ }
+}
+
+static umode_t corsairpsu_hwmon_power_is_visible(const struct corsairpsu_data *priv, u32 attr,
+ int channel)
+{
+ switch (attr) {
+ case hwmon_power_input:
+ case hwmon_power_label:
return 0444;
+ default:
+ return 0;
+ };
+}
- return 0;
+static umode_t corsairpsu_hwmon_in_is_visible(const struct corsairpsu_data *priv, u32 attr,
+ int channel)
+{
+ const struct corsairpsu_crit_values *crits = &priv->crit_values;
+ umode_t res = 0444;
+
+ switch (attr) {
+ case hwmon_in_input:
+ case hwmon_in_label:
+ case hwmon_in_crit:
+ if (channel > 0 && !(crits->in_crit_support & BIT(channel - 1)))
+ res = 0;
+ break;
+ case hwmon_in_lcrit:
+ if (channel > 0 && !(crits->in_lcrit_support & BIT(channel - 1)))
+ res = 0;
+ break;
+ default:
+ break;
+ };
+
+ return res;
}
-static int corsairpsu_hwmon_ops_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
- int channel, long *val)
+static umode_t corsairpsu_hwmon_curr_is_visible(const struct corsairpsu_data *priv, u32 attr,
+ int channel)
{
- struct corsairpsu_data *priv = dev_get_drvdata(dev);
- int ret;
+ const struct corsairpsu_crit_values *crits = &priv->crit_values;
+ const struct corsairpsu_quirk_commands *quirks = &priv->quirks;
+ umode_t res = 0444;
+
+ switch (attr) {
+ case hwmon_curr_input:
+ if (channel == 0 && !quirks->in_curr_support)
+ res = 0;
+ break;
+ case hwmon_curr_label:
+ case hwmon_curr_crit:
+ if (channel > 0 && !(crits->curr_crit_support & BIT(channel - 1)))
+ res = 0;
+ break;
+ default:
+ break;
+ }
+
+ return res;
+}
- if (type == hwmon_temp && attr == hwmon_temp_input && channel < 2) {
- ret = corsairpsu_get_value(priv, channel ? PSU_CMD_TEMP1 : PSU_CMD_TEMP0, channel,
- val);
- } else if (type == hwmon_fan && attr == hwmon_fan_input) {
- ret = corsairpsu_get_value(priv, PSU_CMD_FAN, 0, val);
- } else if (type == hwmon_power && attr == hwmon_power_input) {
+static umode_t corsairpsu_hwmon_ops_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct corsairpsu_data *priv = data;
+
+ switch (type) {
+ case hwmon_temp:
+ return corsairpsu_hwmon_temp_is_visible(priv, attr, channel);
+ case hwmon_fan:
+ return corsairpsu_hwmon_fan_is_visible(priv, attr, channel);
+ case hwmon_power:
+ return corsairpsu_hwmon_power_is_visible(priv, attr, channel);
+ case hwmon_in:
+ return corsairpsu_hwmon_in_is_visible(priv, attr, channel);
+ case hwmon_curr:
+ return corsairpsu_hwmon_curr_is_visible(priv, attr, channel);
+ default:
+ return 0;
+ }
+}
+
+static int corsairpsu_hwmon_temp_read(struct corsairpsu_data *priv, u32 attr, int channel,
+ long *val)
+{
+ struct corsairpsu_crit_values *crits = &priv->crit_values;
+ int err = -EOPNOTSUPP;
+
+ if (channel < 2) {
+ switch (attr) {
+ case hwmon_temp_input:
+ return corsairpsu_get_value(priv, channel ? PSU_CMD_TEMP1 : PSU_CMD_TEMP0,
+ channel, val);
+ case hwmon_temp_crit:
+ *val = crits->temp_crit[channel];
+ err = 0;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return err;
+}
+
+static int corsairpsu_hwmon_power_read(struct corsairpsu_data *priv, u32 attr, int channel,
+ long *val)
+{
+ if (attr == hwmon_power_input) {
switch (channel) {
case 0:
- ret = corsairpsu_get_value(priv, PSU_CMD_TOTAL_WATTS, 0, val);
- break;
+ return corsairpsu_get_value(priv, PSU_CMD_TOTAL_WATTS, 0, val);
case 1 ... 3:
- ret = corsairpsu_get_value(priv, PSU_CMD_RAIL_WATTS, channel - 1, val);
- break;
+ return corsairpsu_get_value(priv, PSU_CMD_RAIL_WATTS, channel - 1, val);
default:
- return -EOPNOTSUPP;
+ break;
}
- } else if (type == hwmon_in && attr == hwmon_in_input) {
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int corsairpsu_hwmon_in_read(struct corsairpsu_data *priv, u32 attr, int channel, long *val)
+{
+ struct corsairpsu_crit_values *crits = &priv->crit_values;
+ int err = -EOPNOTSUPP;
+
+ switch (attr) {
+ case hwmon_in_input:
switch (channel) {
case 0:
- ret = corsairpsu_get_value(priv, PSU_CMD_IN_VOLTS, 0, val);
- break;
+ return corsairpsu_get_value(priv, PSU_CMD_IN_VOLTS, 0, val);
case 1 ... 3:
- ret = corsairpsu_get_value(priv, PSU_CMD_RAIL_OUT_VOLTS, channel - 1, val);
- break;
+ return corsairpsu_get_value(priv, PSU_CMD_RAIL_VOLTS, channel - 1, val);
default:
- return -EOPNOTSUPP;
+ break;
}
- } else if (type == hwmon_curr && attr == hwmon_curr_input) {
+ break;
+ case hwmon_in_crit:
+ *val = crits->in_crit[channel - 1];
+ err = 0;
+ break;
+ case hwmon_in_lcrit:
+ *val = crits->in_lcrit[channel - 1];
+ err = 0;
+ break;
+ }
+
+ return err;
+}
+
+static int corsairpsu_hwmon_curr_read(struct corsairpsu_data *priv, u32 attr, int channel,
+ long *val)
+{
+ struct corsairpsu_crit_values *crits = &priv->crit_values;
+ int err = -EOPNOTSUPP;
+
+ switch (attr) {
+ case hwmon_curr_input:
switch (channel) {
case 0:
- ret = corsairpsu_get_value(priv, PSU_CMD_IN_AMPS, 0, val);
- break;
+ return corsairpsu_get_value(priv, PSU_CMD_IN_AMPS, 0, val);
case 1 ... 3:
- ret = corsairpsu_get_value(priv, PSU_CMD_RAIL_AMPS, channel - 1, val);
- break;
+ return corsairpsu_get_value(priv, PSU_CMD_RAIL_AMPS, channel - 1, val);
default:
- return -EOPNOTSUPP;
+ break;
}
- } else {
- return -EOPNOTSUPP;
+ break;
+ case hwmon_curr_crit:
+ *val = crits->curr_crit[channel - 1];
+ err = 0;
+ break;
+ default:
+ break;
}
- if (ret < 0)
- return ret;
+ return err;
+}
- return 0;
+static int corsairpsu_hwmon_ops_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+ int channel, long *val)
+{
+ struct corsairpsu_data *priv = dev_get_drvdata(dev);
+
+ switch (type) {
+ case hwmon_temp:
+ return corsairpsu_hwmon_temp_read(priv, attr, channel, val);
+ case hwmon_fan:
+ if (attr == hwmon_fan_input)
+ return corsairpsu_get_value(priv, PSU_CMD_FAN, 0, val);
+ return -EOPNOTSUPP;
+ case hwmon_power:
+ return corsairpsu_hwmon_power_read(priv, attr, channel, val);
+ case hwmon_in:
+ return corsairpsu_hwmon_in_read(priv, attr, channel, val);
+ case hwmon_curr:
+ return corsairpsu_hwmon_curr_read(priv, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
}
static int corsairpsu_hwmon_ops_read_string(struct device *dev, enum hwmon_sensor_types type,
@@ -360,8 +599,8 @@ static const struct hwmon_channel_info *corsairpsu_info[] = {
HWMON_CHANNEL_INFO(chip,
HWMON_C_REGISTER_TZ),
HWMON_CHANNEL_INFO(temp,
- HWMON_T_INPUT | HWMON_T_LABEL,
- HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT),
HWMON_CHANNEL_INFO(fan,
HWMON_F_INPUT | HWMON_F_LABEL),
HWMON_CHANNEL_INFO(power,
@@ -371,14 +610,14 @@ static const struct hwmon_channel_info *corsairpsu_info[] = {
HWMON_P_INPUT | HWMON_P_LABEL),
HWMON_CHANNEL_INFO(in,
HWMON_I_INPUT | HWMON_I_LABEL,
- HWMON_I_INPUT | HWMON_I_LABEL,
- HWMON_I_INPUT | HWMON_I_LABEL,
- HWMON_I_INPUT | HWMON_I_LABEL),
+ HWMON_I_INPUT | HWMON_I_LABEL | HWMON_I_LCRIT | HWMON_I_CRIT,
+ HWMON_I_INPUT | HWMON_I_LABEL | HWMON_I_LCRIT | HWMON_I_CRIT,
+ HWMON_I_INPUT | HWMON_I_LABEL | HWMON_I_LCRIT | HWMON_I_CRIT),
HWMON_CHANNEL_INFO(curr,
HWMON_C_INPUT | HWMON_C_LABEL,
- HWMON_C_INPUT | HWMON_C_LABEL,
- HWMON_C_INPUT | HWMON_C_LABEL,
- HWMON_C_INPUT | HWMON_C_LABEL),
+ HWMON_C_INPUT | HWMON_C_LABEL | HWMON_C_CRIT,
+ HWMON_C_INPUT | HWMON_C_LABEL | HWMON_C_CRIT,
+ HWMON_C_INPUT | HWMON_C_LABEL | HWMON_C_CRIT),
NULL
};
@@ -513,6 +752,9 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct hid_device_id
goto fail_and_stop;
}
+ corsairpsu_get_criticals(priv);
+ corsairpsu_check_quirks(priv);
+
priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "corsairpsu", priv,
&corsairpsu_chip_info, 0);
Adds support for reading the critical values of the temperature sensors and the rail sensors (voltage and current) once and caches them. Updates the naming of the constants following a more clear scheme. Also updates the documentation and fixes some typos. Updates is_visible and ops_read functions to be more readable. The new sensors output of a Corsair HX850i will look like this: corsairpsu-hid-3-1 Adapter: HID adapter v_in: 230.00 V v_out +12v: 12.14 V (crit min = +8.41 V, crit max = +15.59 V) v_out +5v: 5.03 V (crit min = +3.50 V, crit max = +6.50 V) v_out +3.3v: 3.30 V (crit min = +2.31 V, crit max = +4.30 V) psu fan: 0 RPM vrm temp: +46.2°C (crit = +70.0°C) case temp: +39.8°C (crit = +70.0°C) power total: 152.00 W power +12v: 108.00 W power +5v: 41.00 W power +3.3v: 5.00 W curr +12v: 9.00 A (crit max = +85.00 A) curr +5v: 8.31 A (crit max = +40.00 A) curr +3.3v: 1.62 A (crit max = +40.00 A) Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> --- Changes in v3: - introduced a quirk check function to catch non-working commands - split is_visible function into subfunctions - moved the "is value valid" checks into the is_visibility subfunction - simplified hwmon_ops_read function - rearranged sysfs entries in the documentation like suggested Changes in v2: - simplified reading/caching of critical values and hwmon_ops_read function - removed unnecessary debug output and comments --- Documentation/hwmon/corsair-psu.rst | 13 +- drivers/hwmon/corsair-psu.c | 352 +++++++++++++++++++++++----- 2 files changed, 309 insertions(+), 56 deletions(-)