From patchwork Wed Oct 18 21:58:09 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frank Li X-Patchwork-Id: 13427982 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id AEF79CDB483 for ; Wed, 18 Oct 2023 21:59:13 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=UmYiadsComSc1RGCKfjDmmwdwAEJh6ZYI6gIrFgvp1o=; b=V8ygJaWjj3vJaH Occ4bfLdc4A1ql5ikw35YwpheUvVoce8g7lBvbqjXE6v0iqLRP2Fx5hSUErFsJ8AaO0cmIVF1M1MX 7TcONZ/THw+zqa1RXsQEXfX0F4iVMFSFUk13EBQSH2redGi+o4cCQ9KIW3BqCgSiwy9WeKIRH3CKX zpy4pSwVwkgaaOkZdk3E1XzG04uBuJ9fAd2/9BEigeUaNt0UQTZ/kny+ztIo9wUo0UeBoHqAhz9Zk cOkbFB8kvxbxPV/8pdRtPr4pqRsrc2gpWr2R09PMyqTEudz0rcH+6XhUY2d+LfAd9d6glnYMGene4 cvpHV3/pCbDNn6WQ6/vA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1qtEZN-00Fn8Y-1P; Wed, 18 Oct 2023 21:59:13 +0000 Received: from mail-vi1eur05on2060c.outbound.protection.outlook.com ([2a01:111:f400:7d00::60c] helo=EUR05-VI1-obe.outbound.protection.outlook.com) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1qtEZC-00Fmqn-0u for linux-i3c@lists.infradead.org; Wed, 18 Oct 2023 21:59:11 +0000 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=JcAYYjMFBA/kC1S/nelka+oBcs44YXRdb11oBBEqd1KW2s3wP59ZA9PjsA1Qy630ptFsBV3sgJwXc6lAViQM63qzt8KLeZNGoG7KR33gybT4s9egKwBcFGgwvbUNwY6QdgfvVhIVJGdx5oglfIxvoTL+YpUCZnDuCJCEgb87xxOoifRoU0jMcyEMdvt9VUXhMYGbummpZILuiXOShvwjKU5LC8Zk4V+nWoXMvHvmaz5DXe8R5Q2xXo9XzPy+kC7k64Zg3H/iAuKQ9R+ZM/w4DFSfaeBulpd/+IIP0Hy+/1aTdBs2Mrdu/Aa0dFWDCvL2He9uOOIpBrgRBv359Mn80A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=vDAV/oMkZ1fz60cAdAxt4H3rVGFC+p9cVJ/KX9+e6iQ=; b=JOC0aLyiysVKEgqK6LdPOMxoRABbICFta9h89aL2vIuD3rXvOr6ql2Iq/rtQj5jVFa30OO4esKWrpJa94EuPbfPCkSFiYBOr1ceC+fA+/NvfqEO/nE4V5m885k2rp8dCIWaW6py/MZbBCVDJmeUAMc4q0d/P3Kts9KSUzYITwMSpy6NIITd1mBhHXJvt4U7UbfTeA1H9VaH7M46SRY/itI46urjjlfupZobf2NDOl6d2wtn220pvjrSgRa6J1I70lM8DQKfOXqPDqmf3IwA/WNZoKF3o46EAhzf+H4gQC+C3UJJiA/p6Cqx13n+wofdKHuK7DBBpWhf2UAxFFN2elg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=nxp.com; dmarc=pass action=none header.from=nxp.com; dkim=pass header.d=nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=nxp.com; s=selector2; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=vDAV/oMkZ1fz60cAdAxt4H3rVGFC+p9cVJ/KX9+e6iQ=; b=YXgfzjLmSCE1YZegABImpKL7kujGZ8IJVp6bUQyqAu1xaTgYn6JGvJlyIwbwgkuS1HJZATv9rOshcIbs1/iY213C1XxvbOl/cUvnLWG+GYMciVlQ/w2g1D0P+Ogv84+opAORfV9XssevadUw15s+YeN1IFqeGhiJr4B62SJWmUs= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=nxp.com; Received: from AM6PR04MB4838.eurprd04.prod.outlook.com (2603:10a6:20b:4::16) by DB9PR04MB9750.eurprd04.prod.outlook.com (2603:10a6:10:4c5::8) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6907.25; Wed, 18 Oct 2023 21:58:49 +0000 Received: from AM6PR04MB4838.eurprd04.prod.outlook.com ([fe80::1774:e25f:f99:aca2]) by AM6PR04MB4838.eurprd04.prod.outlook.com ([fe80::1774:e25f:f99:aca2%4]) with mapi id 15.20.6907.022; Wed, 18 Oct 2023 21:58:49 +0000 From: Frank Li To: miquel.raynal@bootlin.com, conor.culhane@silvaco.com, alexandre.belloni@bootlin.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, corbet@lwn.net, joe@perches.com, Frank.Li@nxp.com, linux-i3c@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org Cc: gregkh@linuxfoundation.org, imx@lists.linux.dev, jirislaby@kernel.org, linux-serial@vger.kernel.org Subject: [PATCH 5/5] Documentation: i3c: Add I3C slave mode controller and function Date: Wed, 18 Oct 2023 17:58:09 -0400 Message-Id: <20231018215809.3477437-6-Frank.Li@nxp.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20231018215809.3477437-1-Frank.Li@nxp.com> References: <20231018215809.3477437-1-Frank.Li@nxp.com> X-ClientProxiedBy: SJ0PR03CA0225.namprd03.prod.outlook.com (2603:10b6:a03:39f::20) To AM6PR04MB4838.eurprd04.prod.outlook.com (2603:10a6:20b:4::16) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: AM6PR04MB4838:EE_|DB9PR04MB9750:EE_ X-MS-Office365-Filtering-Correlation-Id: b8258b18-9b98-4c11-7e40-08dbd02568da X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255;CTRY:;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:AM6PR04MB4838.eurprd04.prod.outlook.com;PTR:;CAT:NONE;SFS:(13230031)(346002)(376002)(396003)(39860400002)(136003)(366004)(230922051799003)(1800799009)(451199024)(186009)(64100799003)(66946007)(66556008)(66476007)(316002)(6666004)(478600001)(6486002)(8936002)(8676002)(36756003)(5660300002)(41300700001)(4326008)(30864003)(2906002)(86362001)(7416002)(38100700002)(2616005)(52116002)(6512007)(1076003)(83380400001)(6506007)(26005)(921005)(38350700005);DIR:OUT;SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: YO+Y/UIhyMSHBBdMEOSasKaFJgyOTbwMcfrFuVLjzAFfPbLsIUX3RDnQwZWEWR7PUOUg0+qHeA43X8NMgNMsy2uVOU1DELR1PD17e4pnR3qB+sWRJtsxztWK9CTIUu7SoLK43bqm0Nf+mircMuHHvdDYo2ysV8hP+Fytwc8pJmVjAwePrOapSyWi2rDO+l32VimeX5AF9CnwEIvCS/IG0nESMPXGSXTSd5NUejXjjRKMwK3AuMXllB+XohAUxIFdIsnZO2JGIIH42jABv/dm8e6B3TiGMJ9wtCPY7TkvR8XyHaKNK55LB9FRPphdXozC8cgtfyzZdrJKT2ovPhFWmfYa+KiNv2xivaSz7ajGlgiUYeJpcEUS2zNa4AvCic0VMseqODxP+oKxSZgwUPCrr9HYq6kQTAGxVs1P5VMprcMwfPFL6wagr1BIbTaCQp8MXoAFcX2PP1otmETPVEKSGHTe8znKZqg2WoKlFjhahVYToRpevMDcXcvgixZgU8hzfl3ImKN/rCH2sowJZlHanMB2tVvZrPVlMXMvXeeDhheFlnAAxXbohpA8obDXu+2vXxJ9pb9Wp0aHGJFytje40L+9WKQeT8AW4yEKwZxwM2du0OChg8cFa+epuDy9WVkYliTOWH8EJbC8bVJloM6bX/IQjGA04gJeC7nC0Cq3H0K+3qbUAD0lzmTTFmsHj1UnipV/N8yJ0ULkQ4LpYcaOMijtMdjyIb7X4NKjgLfgeuQgV0qKD2ukD1Ctc+VjMZ7khkqX7M7sG5EDSkQ5s60h2F3rPzWvFHBJElE8Hrx771ulFAPa0dbJRs2PJ6FZtco05CyluoOmqWsVUuq8JDXXP0eQOzZU1gLxaOvjJQ1pQxcPEOvnEYjKon7NDnglmmozKXCNd5pyRgBq0uxabXQ1zjJg1AVAN0q+O1PLGsZPiTTvForwpmC0x5zXjH6XHVVS5k7qsEwEsWpKyCo+kYUbCd91DJFezESCn2JDGBGaB+e5VvGHmVcqiORCpCd42j2YAwDIKahkpnxFXO84H4LBsicfFW6AAwJNtgToSk+LdRnIv8oCch+KaapCctmtJ60H+FFRi3zHpIlzzluxMYP8GzZGjDuLLkhyWJE+HtzPwEbKGB4Kxf9EioNWkeZlHhJ53jXtGnDBHW25aDgc63FVpexCmvAAU8WJwtEHNVv8FfVV7qedTk5irgsksZlOExQlUamjfD9h/8RUELyQu6U+BFBaU4/mQ5LVwbZUX7Yl0OjSf6jTwbuFViFF7GEXrcuPUqjxXgVRhcBC4XvaDaDKXooVeBXEmNmoir+iw1Sridy3k2MAJX3lzVI/ly0xtuTqqkPRMypsi16BIOlaFrfuJq4sod55NbH5/HGOl0aaUVav9USZlaHeqKPn3bmYAdGLKJVXk8IhQPu5lkPpaJMieIv8oBVZgGxhpmdZrBOZG8bOQx1cUWbE/ZPUQhaNaIdb25wA0R5M7R7dRj7pGRPk0cDovn1ddfdPFrNFkprscbDMPqUkZsyr0rxQscggSll8V9nk+eIneeZZSU79tMxTH6luaVGTTLjXuasPzDDrDit2fBW1y9cIFaGPMyt49pb/ X-OriginatorOrg: nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: b8258b18-9b98-4c11-7e40-08dbd02568da X-MS-Exchange-CrossTenant-AuthSource: AM6PR04MB4838.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 18 Oct 2023 21:58:49.7192 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: yq/G6RZ0MEtihLZuQ6fXi5e1RvFAzjrY6i6n20NA4S1Erta6ame/ru9nb42AzvPtTY9ePq1pOoXxjg20JdGmTQ== X-MS-Exchange-Transport-CrossTenantHeadersStamped: DB9PR04MB9750 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20231018_145902_338780_CDFCA522 X-CRM114-Status: GOOD ( 23.01 ) X-BeenThere: linux-i3c@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-i3c" Errors-To: linux-i3c-bounces+linux-i3c=archiver.kernel.org@lists.infradead.org Add I3C slave mode and tty over i3c func driver document. Signed-off-by: Frank Li --- Documentation/driver-api/i3c/index.rst | 1 + .../driver-api/i3c/slave/i3c-slave-cfs.rst | 109 ++++++++++ .../driver-api/i3c/slave/i3c-slave.rst | 189 ++++++++++++++++++ .../driver-api/i3c/slave/i3c-tty-function.rst | 103 ++++++++++ .../driver-api/i3c/slave/i3c-tty-howto.rst | 109 ++++++++++ Documentation/driver-api/i3c/slave/index.rst | 13 ++ 6 files changed, 524 insertions(+) create mode 100644 Documentation/driver-api/i3c/slave/i3c-slave-cfs.rst create mode 100644 Documentation/driver-api/i3c/slave/i3c-slave.rst create mode 100644 Documentation/driver-api/i3c/slave/i3c-tty-function.rst create mode 100644 Documentation/driver-api/i3c/slave/i3c-tty-howto.rst create mode 100644 Documentation/driver-api/i3c/slave/index.rst diff --git a/Documentation/driver-api/i3c/index.rst b/Documentation/driver-api/i3c/index.rst index 783d6dad054b6..63fc51fc8bd58 100644 --- a/Documentation/driver-api/i3c/index.rst +++ b/Documentation/driver-api/i3c/index.rst @@ -9,3 +9,4 @@ I3C subsystem protocol device-driver-api master-driver-api + slave/index diff --git a/Documentation/driver-api/i3c/slave/i3c-slave-cfs.rst b/Documentation/driver-api/i3c/slave/i3c-slave-cfs.rst new file mode 100644 index 0000000000000..d78fcbc4e5587 --- /dev/null +++ b/Documentation/driver-api/i3c/slave/i3c-slave-cfs.rst @@ -0,0 +1,109 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +Configuring I3C Slave Using CONFIGFS +======================================= + +:Author: Frank Li + +The I3C Slave Core exposes configfs entry (i3c_slave) to configure the I3C +slave function and to bind the slave function +with the slave controller. (For introducing other mechanisms to +configure the I3C Slave Function refer to [1]). + +Mounting configfs +================= + +The I3C Slave Core layer creates i3c_slave directory in the mounted configfs +directory. configfs can be mounted using the following command:: + + mount -t configfs none /sys/kernel/config + +Directory Structure +=================== + +The i3c_slave configfs has two directories at its root: controllers and +functions. Every Controller device present in the system will have an entry in +the *controllers* directory and every Function driver present in the system +will have an entry in the *functions* directory. +:: + + /sys/kernel/config/i3c_slave/ + .. controllers/ + .. functions/ + +Creating Function Device +=================== + +Every registered Function driver will be listed in controllers directory. The +entries corresponding to Function driver will be created by the Function core. +:: + + /sys/kernel/config/i3c_slave/functions/ + .. / + ... / + ... / + ... / + .. / + ... / + ... / + +In order to create a of the type probed by , +the user has to create a directory inside . + +Every directory consists of the following entries that can be +used to configure the standard configuration header of the slave function. +(These entries are created by the framework when any new is +created) +:: + + .. / + ... / + ... vendor_id + ... part_id + ... bcr + ... dcr + ... ext_id + ... instance_id + ... max_read_len + ... max_write_len + ... vendor_info + +Controller Device +========== + +Every registered Controller device will be listed in controllers directory. The +entries corresponding to Controller device will be created by the Controller +core. +:: + + /sys/kernel/config/i3c_slave/controllers/ + .. / + ... / + .. / + ... / + +The directory will have a list of symbolic links to +. These symbolic links should be created by the user to +represent the functions present in the slave device. Only +that represents a physical function can be linked to a Controller device. + +:: + + | controllers/ + | / + | + | functions/ + | / + | / + | vendor_id + | part_id + | bcr + | dcr + | ext_id + | instance_id + | max_read_len + | max_write_len + | vendor_info + +[1] Documentation/I3C/slave/pci-slave.rst diff --git a/Documentation/driver-api/i3c/slave/i3c-slave.rst b/Documentation/driver-api/i3c/slave/i3c-slave.rst new file mode 100644 index 0000000000000..363421241b594 --- /dev/null +++ b/Documentation/driver-api/i3c/slave/i3c-slave.rst @@ -0,0 +1,189 @@ +.. SPDX-License-Identifier: GPL-2.0 + +:Author: Frank Li + +This document is a guide to use the I3C Slave Framework in order to create +slave controller driver, slave function driver, and using configfs +interface to bind the function driver to the controller driver. + +Introduction +============ + +Linux has a comprehensive I3C subsystem to support I3C controllers that +operates in master mode. The subsystem has capability to scan I3C bus,assign +i3c device address, load I3C driver (based on Manufacturer ID, part ID), +support other services like hot-join, In-Band Interrupt(IBI). + +However the I3C controller IP integrated in some SoCs is capable of operating +either in Master mode or Slave mode. I3C Slave Framework will add slave mode +support in Linux. This will help to run Linux in an slave system which can +have a wide variety of use cases from testing or validation, co-processor +accelerator, etc. + +I3C Slave Core +================= + +The I3C Slave Core layer comprises 3 components: the Slave Controller +library, the Slave Function library, and the configfs layer to bind the +slave function with the slave controller. + +I3C Slave Controller Library +------------------------------------ + +The Controller library provides APIs to be used by the controller that can +operate in slave mode. It also provides APIs to be used by function +driver/library in order to implement a particular slave function. + +APIs for the I3C Slave controller Driver +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section lists the APIs that the I3C Slave core provides to be used +by the I3C controller driver. + +* devm_i3c_slave_ctrl_create()/i3c_slave_ctrl_create() + + The I3C controller driver should implement the following ops: + + * set_config: ops to set i3c configuration + * enable: ops to enable controller + * disable: ops to disable controller + * raise_ibi: ops to raise IBI to master controller + * alloc_request: ops to alloc a transfer request + * free_request: ops to free a transfer request + * queue: ops to queue a request to transfer queue + * dequeue: ops to dequeue a request from transfer queue + * cancel_all_reqs: ops to cancel all request from transfer queue + * fifo_status: ops to get fifo status + * fifo_flush: ops to flush hardware fifo + * get_features: ops to get controller supported features + + The I3C controller driver can then create a new Controller device by + invoking devm_i3c_slave_ctrl_create()/i3c_slave_ctrl_create(). + +* devm_i3c_slave_ctrl_destroy()/i3c_slave_ctrl_destroy() + + The I3C controller driver can destroy the Controller device created by + either devm_i3c_slave_ctrl_create() or i3c_slave_ctrl_create() using + devm_i3c_slave_ctrl_destroy() or i3c_slave_ctrl_destroy(). + +I3C Slave Controller APIs for the I3C Slave Function Driver +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section lists the APIs that the I3C Slave core provides to be used +by the I3C slave function driver. + +* i3c_slave_ctrl_set_config() + + The I3C slave function driver should use i3c_slave_ctrl_set_config() to + write i3c configuration to the slave controller. + +* i3c_slave_ctrl_enable()/i3c_slave_ctrl_disable() + + The I3C slave function driver should use i3c_slave_ctrl_enable()/ + i3c_slave_ctrl_disable() to enable/disable i3c slave controller. + +* i3c_slave_ctrl_alloc_request()/i3c_slave_ctrl_free_request() + + The I3C slave function driver should usei3c_slave_ctrl_alloc_request() / + i3c_slave_ctrl_free_request() to alloc/free a i3c request. + +* i3c_slave_ctrl_raise_ibi() + + The I3C slave function driver should use i3c_slave_ctrl_raise_ibi() to + raise IBI. + +* i3c_slave_ctrl_queue()/i3c_slave_ctrl_dequeue() + + The I3C slave function driver should use i3c_slave_ctrl_queue()/ + i3c_slave_ctrl_dequeue(), to queue/dequeue I3C transfer to/from transfer + queue. + +* i3c_slave_ctrl_get_features() + + The I3C slave function driver should use i3c_slave_ctrl_get_features() + to get I3C slave controller supported features. + +Other I3C Slave Controller APIs +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +There are other APIs provided by the Controller library. These are used for +binding the I3C Slave Function device with Controlller device. i3c-cfs.c can +be used as reference for using these APIs. + +* i3c_slave_ctrl_get() + + Get a reference to the I3C slave controller based on the device name of + the controller. + +* i3c_slave_ctrl_put() + + Release the reference to the I3C slave controller obtained using + i3c_slave_ctrl_get() + +* i3c_slave_ctrl_add_func() + + Add a I3C slave function to a I3C slave controller. + +* i3c_slave_ctrl_remove_func() + + Remove the I3C slave function from I3C slave controller. + +I3C Slave Function Library +---------------------------------- + +The I3C Slave Function library provides APIs to be used by the function driver +and the Controller library to provide slave mode functionality. + +I3C Slave Function APIs for the I3C Slave Function Driver +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section lists the APIs that the I3C Slave core provides to be used +by the I3C slave function driver. + +* i3c_slave_func_register_driver() + + The I3C Slave Function driver should implement the following ops: + * bind: ops to perform when a Controller device has been bound to + Function device + * unbind: ops to perform when a binding has been lost between a + Controller device and Function device + + The I3C Function driver can then register the I3C Function driver by using + i3c_slave_func_register_driver(). + +* i3c_slave_func_unregister_driver() + + The I3C Function driver can unregister the I3C Function driver by using + i3c_epf_unregister_driver(). + +APIs for the I3C Slave Controller Library +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section lists the APIs that the I3C Slave core provides to be used +by the I3C slave controller library. + +Other I3C Slave APIs +~~~~~~~~~~~~~~~~~~~~ + +There are other APIs provided by the Function library. These are used to +notify the function driver when the Function device is bound to the EPC device. +i3c-cfs.c can be used as reference for using these APIs. + +* i3c_slave_func_create() + + Create a new I3C Function device by passing the name of the I3C EPF device. + This name will be used to bind the Function device to a Function driver. + +* i3c_slave_func_destroy() + + Destroy the created I3C Function device. + +* i3c_slave_func_bind() + + i3c_slave_func_bind() should be invoked when the EPF device has been bound + to a Controller device. + +* i3c_slave_func_unbind() + + i3c_slave_func_unbind() should be invoked when the binding between EPC + device and function device is lost. diff --git a/Documentation/driver-api/i3c/slave/i3c-tty-function.rst b/Documentation/driver-api/i3c/slave/i3c-tty-function.rst new file mode 100644 index 0000000000000..3c8521d7aa31a --- /dev/null +++ b/Documentation/driver-api/i3c/slave/i3c-tty-function.rst @@ -0,0 +1,103 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +PCI Test Function +================= + +:Author: Kishon Vijay Abraham I + +Traditionally PCI RC has always been validated by using standard +PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards. +However with the addition of EP-core in linux kernel, it is possible +to configure a PCI controller that can operate in EP mode to work as +a test device. + +The PCI endpoint test device is a virtual device (defined in software) +used to test the endpoint functionality and serve as a sample driver +for other PCI endpoint devices (to use the EP framework). + +The PCI endpoint test device has the following registers: + + 1) PCI_ENDPOINT_TEST_MAGIC + 2) PCI_ENDPOINT_TEST_COMMAND + 3) PCI_ENDPOINT_TEST_STATUS + 4) PCI_ENDPOINT_TEST_SRC_ADDR + 5) PCI_ENDPOINT_TEST_DST_ADDR + 6) PCI_ENDPOINT_TEST_SIZE + 7) PCI_ENDPOINT_TEST_CHECKSUM + 8) PCI_ENDPOINT_TEST_IRQ_TYPE + 9) PCI_ENDPOINT_TEST_IRQ_NUMBER + +* PCI_ENDPOINT_TEST_MAGIC + +This register will be used to test BAR0. A known pattern will be written +and read back from MAGIC register to verify BAR0. + +* PCI_ENDPOINT_TEST_COMMAND + +This register will be used by the host driver to indicate the function +that the endpoint device must perform. + +======== ================================================================ +Bitfield Description +======== ================================================================ +Bit 0 raise legacy IRQ +Bit 1 raise MSI IRQ +Bit 2 raise MSI-X IRQ +Bit 3 read command (read data from RC buffer) +Bit 4 write command (write data to RC buffer) +Bit 5 copy command (copy data from one RC buffer to another RC buffer) +======== ================================================================ + +* PCI_ENDPOINT_TEST_STATUS + +This register reflects the status of the PCI endpoint device. + +======== ============================== +Bitfield Description +======== ============================== +Bit 0 read success +Bit 1 read fail +Bit 2 write success +Bit 3 write fail +Bit 4 copy success +Bit 5 copy fail +Bit 6 IRQ raised +Bit 7 source address is invalid +Bit 8 destination address is invalid +======== ============================== + +* PCI_ENDPOINT_TEST_SRC_ADDR + +This register contains the source address (RC buffer address) for the +COPY/READ command. + +* PCI_ENDPOINT_TEST_DST_ADDR + +This register contains the destination address (RC buffer address) for +the COPY/WRITE command. + +* PCI_ENDPOINT_TEST_IRQ_TYPE + +This register contains the interrupt type (Legacy/MSI) triggered +for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands. + +Possible types: + +====== == +Legacy 0 +MSI 1 +MSI-X 2 +====== == + +* PCI_ENDPOINT_TEST_IRQ_NUMBER + +This register contains the triggered ID interrupt. + +Admissible values: + +====== =========== +Legacy 0 +MSI [1 .. 32] +MSI-X [1 .. 2048] +====== =========== diff --git a/Documentation/driver-api/i3c/slave/i3c-tty-howto.rst b/Documentation/driver-api/i3c/slave/i3c-tty-howto.rst new file mode 100644 index 0000000000000..11c8900fd16f3 --- /dev/null +++ b/Documentation/driver-api/i3c/slave/i3c-tty-howto.rst @@ -0,0 +1,109 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +I3C TTY User Guide +=================== + +:Author: Frank Li + +This document is a guide to help users use i3c-slave-tty function driver +and i3ctty master driver for testing I3C. The list of steps to be followed in the +master side and slave side is given below. + +Endpoint Device +=============== + +Endpoint Controller Devices +--------------------------- + +To find the list of slave controller devices in the system:: + + # ls /sys/class/i3c_slave/ + 44330000.i3c-slave + +If CONFIG_I3C_SLAVE_CONFIGFS is enabled:: + + # ls /sys/kernel/config/i3c_slave/controllers/ + 44330000.i3c-slave + + +Endpoint Function Drivers +------------------------- + +To find the list of slave function drivers in the system:: + + # ls /sys/bus/i3c_slave_func/drivers + tty + +If CONFIG_I3C_SLAVE_CONFIGFS is enabled:: + + # ls /sys/kernel/config/i3c_slave/functions + tty + + +Creating i3c-slave-tty Device +---------------------------- + +I3C slave function device can be created using the configfs. To create +i3c-slave-tty device, the following commands can be used:: + + # mount -t configfs none /sys/kernel/config + # cd /sys/kernel/config/i3c_slave/ + # mkdir functions/tty/func1 + +The "mkdir func1" above creates the i3c-slave-tty function device that will +be probed by i3c tty driver. + +The I3C slave framework populates the directory with the following +configurable fields:: + + # ls functions/tty/func1 + bcr dcr ext_id instance_id max_read_len max_write_len + part_id vendor_id vendor_info + +The I3C slave function driver populates these entries with default values +when the device is bound to the driver. The i3c-slave-tty driver populates +vendorid with 0xffff and interrupt_pin with 0x0001:: + + # cat functions/tty/func1/vendor_id + 0x0 + +Configuring i3c-slave-tty Device +------------------------------- + +The user can configure the i3c-slave-tty device using configfs entry. In order +to change the vendorid, the following commands can be used:: + + # echo 0x011b > functions/tty/func1/vendor_id + # echo 0x1000 > functions/tty/func1/part_id + # echo 0x6 > functions/tty/t/bcr + +Binding i3c-slave-tty Device to slave Controller +------------------------------------------------ + +In order for the slave function device to be useful, it has to be bound to +a I3C slave controller driver. Use the configfs to bind the function +device to one of the controller driver present in the system:: + + # ln -s functions/pci_epf_test/func1 controllers/44330000.i3c-slave/ + +I3C Master Device +================ + +Check I3C tty device is probed + + # ls /sys/bus/i3c/devices/0-23610000000 + 0-23610000000:0 bcr dcr driver dynamic_address hdrcap + modalias pid power subsystem tty uevent + +Using Slave TTY function Device +----------------------------------- + +Host side: + cat /dev/ttyI3C0 +Slave side + echo abc >/dev/ttyI3C0 + +You will see "abc" show at console. + +You can use other tty tool to test I3C slave tty device. diff --git a/Documentation/driver-api/i3c/slave/index.rst b/Documentation/driver-api/i3c/slave/index.rst new file mode 100644 index 0000000000000..69727ccf985db --- /dev/null +++ b/Documentation/driver-api/i3c/slave/index.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +I3C Slave Framework +====================== + +.. toctree:: + :maxdepth: 2 + + i3c-slave + i3c-slave-cfs + i3c-tty-howto +