| Message ID | 20190205174333.17672-1-rui.silva@linaro.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | iio: gyro: add fxas2100x driver | expand |
On Tue, 5 Feb 2019 17:43:28 +0000 Rui Miguel Silva <rui.silva@linaro.org> wrote: > Hi, > This series introduce a NXP fxas2100x family tri axis gyroscope driver [0] > It add a core implementaiton plus an i2c and spi. > > This device can be found in the warp7 board [1], where it was tested. Firstly no wild cards anywhere in the naming please, that includes the filenames. It goes wrong far too often when a new part comes up that matches the wild cards but has a totally different interface. Secondly, this is the second driver proposed for this part... Not sure what happened to the previous driver? +CC Afonso. https://lore.kernel.org/lkml/201809121715.5Babt1QC%25fengguang.wu@intel.com/T/ At least worth checking for any feature differences. I'll review this without checking back to that driver though. thanks, Jonathan > > --- > Cheers, > Rui > > v1->v2: > Peter Meerwal-Stadler: > - changed (c) to current year > - add regmap include file in .h > - fix comments s/cuttof/cutoff/ > - add more info in mutex comment > - check value in range_fs_from_value > - ret not checked in range_value_from_fs > - move mode to enum type > - remove line between value get and validation of value in all file > - pre-write, regmap_field_write, post_write refactoring > - check val2 and val == 0 in write raw > - check in_anglvel_scale: 7.8125? > - trigger_handler: 2 => sizeof(s16) > - check buffer size > - print %02% to output chip id > - remove !! as state is bool > - trigger probe return devm_iio_trigger_register > - remove error msg in case of devm_iio_device_register > Fabio Estebam: > - rename FXAS2100X to FXAS21002 > - change compatible nxp,fxas2100x to the exact support > - add VDD and VDDIO regulators in bindings and driver > > > [0]: https://www.nxp.com/docs/en/data-sheet/FXAS21002.pdf > [1]: https://www.element14.com/community/community/designcenter/single-board-computers/warp7/overview > > Rui Miguel Silva (5): > iio: gyro: add DT bindings to fxas21002 > iio: gyro: fxas2100x: add core driver for fxas2100x gyroscope > iio: gyro: fxas2100x: add i2c driver > iio: gyro: fxas2100x: add spi driver > ARM: dts: imx7s-warp: add fxas21002 gyroscope > > .../bindings/iio/gyroscope/fxas2100x.txt | 18 + > arch/arm/boot/dts/imx7s-warp.dts | 7 + > drivers/iio/gyro/Kconfig | 22 + > drivers/iio/gyro/Makefile | 3 + > drivers/iio/gyro/fxas2100x.h | 151 +++ > drivers/iio/gyro/fxas2100x_core.c | 931 ++++++++++++++++++ > drivers/iio/gyro/fxas2100x_i2c.c | 73 ++ > drivers/iio/gyro/fxas2100x_spi.c | 70 ++ > 8 files changed, 1275 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/fxas2100x.txt > create mode 100644 drivers/iio/gyro/fxas2100x.h > create mode 100644 drivers/iio/gyro/fxas2100x_core.c > create mode 100644 drivers/iio/gyro/fxas2100x_i2c.c > create mode 100644 drivers/iio/gyro/fxas2100x_spi.c >