[v3,0/2] iio: accel: add support for ADXL355

Message

Puranjay Mohan July 26, 2021, 6:49 p.m. UTC

Add the dt-bindings and the driver for ADXL355 3-axis MEMS Accelerometer.

Changes since v2:
1. Add separate DT binding doc in yaml.
2. Use ____cacheline_aligned buffer for regmap_bulk_read/write calls.
3. Make code consistent by using same style in switch case.
4. Use FIELD_PREP in place of custom macros.
5. Make Kconfig description more informative.

Changes since v1:
1. Remove the declarations for static regmap structures from adxl355.h.
This was missed in the v1 and caused errors.
2. Make switch case statements consistent by directly returning from
each case rather than saving the return in a variable.
3. Some coding style changes.

Changes since v0:
1. Move adxl355_hpf_3db_table to adxl355_data structure. This is done to make
sure that each device gets its own table.
2. Make local regmap definitions private to adxl355_core.c.
3. Other minor coding style changes.

Puranjay Mohan (2):
  dt-bindings: iio: accel: Add DT binding doc for ADXL355
  iio: accel: Add driver support for ADXL355

 .../bindings/iio/accel/adi,adxl355.yaml       |  75 +++
 MAINTAINERS                                   |   7 +
 drivers/iio/accel/Kconfig                     |  29 +
 drivers/iio/accel/Makefile                    |   3 +
 drivers/iio/accel/adxl355.h                   |  77 +++
 drivers/iio/accel/adxl355_core.c              | 545 ++++++++++++++++++
 drivers/iio/accel/adxl355_i2c.c               |  63 ++
 drivers/iio/accel/adxl355_spi.c               |  66 +++
 8 files changed, 865 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
 create mode 100644 drivers/iio/accel/adxl355.h
 create mode 100644 drivers/iio/accel/adxl355_core.c
 create mode 100644 drivers/iio/accel/adxl355_i2c.c
 create mode 100644 drivers/iio/accel/adxl355_spi.c