mbox series

[0/2] add ti tmag5273 driver

Message ID 20221115073718.2377311-1-gerald.loacker@wolfvision.net (mailing list archive)
Headers show
Series add ti tmag5273 driver | expand

Message

Gerald Loacker Nov. 15, 2022, 7:37 a.m. UTC 
Hi all,

This patch set adds support for the TI TMAG5273 Low-Power Linear 3D Hall-
Effect Sensor. Additionally to temperature and magnetic X, Y and Z-axes the
angle and magnitude are reported. The sensor is operating in continuous
measurement mode and changes to sleep mode if not used for 5 seconds.

Tests were done on a ROCK3 Model A board using the TMAG5273 evaluation
module.

Regards,
Gerald Loacker

Gerald Loacker (2):
  dt-bindings: iio: magnetometer: add ti tmag5273 documentation file
  iio: magnetometer: add ti tmag5273 driver

 .../iio/magnetometer/ti,tmag5273.yaml         |  72 ++
 MAINTAINERS                                   |   7 +
 drivers/iio/magnetometer/Kconfig              |  12 +
 drivers/iio/magnetometer/Makefile             |   2 +
 drivers/iio/magnetometer/tmag5273.c           | 809 ++++++++++++++++++
 5 files changed, 902 insertions(+)
 create mode 100644 .../bindings/iio/magnetometer/ti,tmag5273.yaml
 create mode 100644 drivers/iio/magnetometer/tmag5273.c