[v6,0/3] iio: proximity: Add TYHX HX9023S sensor driver

Message

Yasin Lee June 21, 2024, 7:40 a.m. UTC

Signed-off-by: Yasin Lee <[e-mail]>
---
Changes in v6:

**vendor-prefixes.yaml:**

- Formatted the description in the commit

**tyhx,hx9023s.yaml:**

- Added a link to the DataSheet
- Added `#address-cells` and `#size-cells`
- Removed the following properties:
  - `channel-in-use`
  - `channel-positive`
  - `channel-negative`
- Corrected the reference path to `adc.yaml`
- Inherited `diff-channels` from `adc.yaml` as differential channels
- Added `input-channel` property as a single-ended configuration channel
- Made `vdd-supply` a required option
- Used the generic name `proximity` instead of the chip name in the DTS example

**hx9023s.c:**

- Removed the following headers:
  - `#include <linux/acpi.h>`
  - `#include <linux/byteorder/generic.h>`
  - `#include <linux/kernel.h>`
- Added `#include <asm/byteorder.h>`
- Updated some macro names:
  - `HX9023S_DATA_2BYTES` ---> `HX9023S_2BYTES`
  - `HX9023S_DATA_3BYTES` ---> `HX9023S_3BYTES`
  - `HX9023S_DATA_BYTES_MAX` ---> `HX9023S_BYTES_MAX`
- Added the following macro definitions:
  - `#define HX9023S_POS 0x03`
  - `#define HX9023S_NEG 0x02`
  - `#define HX9023S_NOT_CONNECTED 16`
  - `#define HX9023S_GLOBAL_CTRL0 0x00`
- `struct hx9023s_ch_data`:
  - Added comments explaining the members `raw`, `lp`, `bl`, `diff`
  - Changed the type of struct member `thre` from `int` to `unsigned int`
  - Removed member `cs_position`
  - Changed the type of `struct buffer` member `channels[HX9023S_CH_NUM]` from `__be16` to `__le16`
  - Moved `struct hx9023s_ch_data ch_data` to the bottom
- Updated comments in the array `hx9023s_reg_init_list`:
  - Changed `adc` to `ADC`, `avg` to `average`, and `osr` to `OSR`
  - Provided a more detailed comment for the register `HX9023S_RAW_BL_RD_CFG`
- `struct regmap_config hx9023s_regmap_config`:
  - Added `.rd_type` member
  - Changed `.cache_type` from `REGCACHE_RBTREE` to `REGCACHE_MAPLE`
- Bugfix: The function `hx9023s_data_lock` now only operates on one bit instead of two
- `hx9023s_ch_cfg` function:
  - Replaced magic characters with meaningful macro definitions
  - Changed byte concatenation operations to use `put_unaligned_le16`
- Reviewed each function and made the following changes:
  - Some returns now directly return `regmap_read/write()`
  - For single-byte write operations, changed from `regmap_bulk_write(,,,1)` to `regmap_write(,,)`
  - Changed the type of loop variable `i` to `unsigned`
- `hx9023s_write_far_debounce` and `hx9023s_write_near_debounce` functions:
  - Removed magic numbers and optimized the code
- `hx9023s_get_thres_near` and `hx9023s_get_thres_far` functions:
  - Used intermediate variables for readability and simplified the code logic
- `hx9023s_set_thres_near` and `hx9023s_set_thres_far` functions:
  - Optimized the logic and simplified the code
- `hx9023s_get_prox_state` function:
  - Changed the return value type to `int`
- `hx9023s_data_select` function:
  - Changed the return value type to `int`
- `hx9023s_sample` function:
  - Added intermediate variables for better readability
- `hx9023s_ch_en` function:
  - Optimized the code logic to reduce line count
- `hx9023s_property_get` function:
  - Rewritten due to DTS changes, and calls `fwnode_handle_put` on error to prevent memory leaks
- `hx9023s_get_proximity` function:
  - Added error handling logic for data
- `hx9023s_get_samp_freq` function:
  - Used macro definitions from `units.h` instead of specific numbers for frequency calculation
- `hx9023s_set_samp_freq` function:
  - Used macro definitions from `units.h` instead of specific numbers for frequency calculation
- `hx9023s_write_raw` function:
  - Changed the type of local variable `dir` to `unsigned`
- `hx9023s_write_event_config` function:
  - Replaced `set_bit` and `clear_bit` with `__assign_bit`
- `hx9023s_trigger_handler` function:
  - Added error handling logic for data; fixed uninitialized variable `i` bug
- `hx9023s_buffer_preenable` function:
  - Fixed uninitialized variable `channel` bug
- Added `hx9023s_id_check` function
- `hx9023s_probe` function:
  - Returns directly on `devm_iio_device_alloc` error, without logging; removed `fsleep`
- `hx9023s_resume` function:
  - Calls `hx9023s_interrupt_enable` only when `data->trigger_enabled` is true
- Removed `hx9023s_acpi_match`
- Link to v5: https://lore.kernel.org/linux-iio/[e-mail]/

Changes in v5:
- I have addressed all the issues mentioned in the email responses.
  Additionally, regarding the IIO-related header files, I have checked and found no unused headers.
- Link to v4: https://lore.kernel.org/linux-iio/[e-mail]/

Changes in v4:
- Removed hardware-irrelevant properties from dt-bindings, retaining only channel configuration
  related `channel-positive` and `channel-negative`. Grouped by channel.
  Retained `channel-in-use` as it is hardware-related.
- Removed redundant register definitions.
- Reorganized `struct hx9023s_data`, extracting channel-related attributes
  into a new `struct hx9023s_ch_data`.
- Optimized bit operation related code.
- Replaced `of_` versions with generic firmware parsing functions.
- Fixed other issues mentioned in the email feedback.
- Link to v3: https://lore.kernel.org/linux-iio/20240602152638.2c674930@jic23-huawei/

---
Yasin Lee (3):
      dt-bindings: vendor-prefixes: add tyhx
      dt-bindings: iio: proximity: Add TYHX HX9023S
      iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor

 .../bindings/iio/proximity/tyhx,hx9023s.yaml       |  115 ++
 .../devicetree/bindings/vendor-prefixes.yaml       |    2 +
 drivers/iio/proximity/Kconfig                      |   14 +
 drivers/iio/proximity/Makefile                     |    1 +
 drivers/iio/proximity/hx9023s.c                    | 1150 ++++++++++++++++++++
 5 files changed, 1282 insertions(+)
---
base-commit: 0291f73eaa59fe0dbb715fa405bb47a1d8206e0e
change-id: 20240616-add-tyhx-hx9023s-sensor-driver-e7dbe3bfe596

Best regards,