mbox series

[0/5] ad7380: add support for single-ended parts

Message ID 20240726-ad7380-add-single-ended-chips-v1-0-2d628b60ccd1@baylibre.com (mailing list archive)
Headers show
Series ad7380: add support for single-ended parts | expand

Message

Julien Stephan July 26, 2024, 3:20 p.m. UTC 
This series will add support for ad7386/7/8 (16/14/12 bits) unsigned,
dual simultaneous sampling, single-ended compatible parts, and the
corresponding ad7386-4/7-4/8-4 4 channels to ad7380 driver.

These parts have a 2:1 multiplexer in front of each ADC. They also include
additional configuration registers that allow for either manual selection
or automatic switching (sequencer mode), of the multiplexer inputs.

From an IIO point of view, all inputs are exported, i.e ad7386/7/8
export 4 channels and ad7386-4/7-4/8-4 export 8 channels.

Inputs AinX0 of multiplexers correspond to the first half of IIO channels
(i.e 0-1 or 0-3) and inputs AinX1 correspond to second half (i.e 2-3 or
4-7). Example for AD7386/7/8 (2 channels parts):

          IIO   | AD7386/7/8
                |         +----------------------------
                |         |     _____        ______
                |         |    |     |      |      |
       voltage0 | AinA0 --|--->|     |      |      |
                |         |    | mux |----->| ADCA |---
       voltage2 | AinA1 --|--->|     |      |      |
                |         |    |_____|      |_____ |
                |         |     _____        ______
                |         |    |     |      |      |
       voltage1 | AinB0 --|--->|     |      |      |
                |         |    | mux |----->| ADCB |---
       voltage3 | AinB1 --|--->|     |      |      |
                |         |    |_____|      |______|
                |         |
                |         +----------------------------

To ease the review, this series is split on several commits, in
particular, sequencer mode is added as an additional commit.

Cheers
Julien

Signed-off-by: Julien Stephan <jstephan@baylibre.com>
---
Julien Stephan (5):
      dt-bindings: iio: adc: ad7380: add single-ended compatible parts
      ad7380: prepare driver for single-ended parts support
      ad7380: add support for single-ended parts
      ad7380: enable sequencer for single-ended parts
      docs: iio: ad7380: add support for single-ended parts

 .../devicetree/bindings/iio/adc/adi,ad7380.yaml    |  13 +
 Documentation/iio/ad7380.rst                       |  42 ++
 drivers/iio/adc/ad7380.c                           | 511 +++++++++++++++++----
 3 files changed, 488 insertions(+), 78 deletions(-)
---
base-commit: 472438c7e0e2261c6737a8321f46ef176eef1c8f
change-id: 20240726-ad7380-add-single-ended-chips-b437d1cc8b8b

Best regards,