Show patches with: State = Action Required       |   8968 patches
« 1 2 ... 68 69 70 … 89 90 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v4,2/2] staging: iio: ad7780: remove unnecessary stashed voltage value staging: iio: ad7780: correct driver read - - - --- 2018-11-05 Renato Lui Geh New
[v4,1/2] staging: iio: ad7780: update voltage on read staging: iio: ad7780: correct driver read 1 - - --- 2018-11-05 Renato Lui Geh New
[7/7] dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors add i2c controller support to st_lsm6dsx driver - - - --- 2018-11-04 Lorenzo Bianconi New
[6/7] iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller add i2c controller support to st_lsm6dsx driver - - - --- 2018-11-04 Lorenzo Bianconi New
[5/7] iio: imu: st_lsm6dsx: add i2c embedded controller support add i2c controller support to st_lsm6dsx driver - - - --- 2018-11-04 Lorenzo Bianconi New
[4/7] iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids add i2c controller support to st_lsm6dsx driver - - - --- 2018-11-04 Lorenzo Bianconi New
[3/7] iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark add i2c controller support to st_lsm6dsx driver - - - --- 2018-11-04 Lorenzo Bianconi New
[2/7] iio: imu: st_lsm6dsx: reboot memory content after reset add i2c controller support to st_lsm6dsx driver - - - --- 2018-11-04 Lorenzo Bianconi New
[1/7] iio: imu: st_lsm6dsx: introduce locked read/write utility routines add i2c controller support to st_lsm6dsx driver - - - --- 2018-11-04 Lorenzo Bianconi New
[v5,1/1] staging: iio: adc: ad7280a: use devm_* APIs [v5,1/1] staging: iio: adc: ad7280a: use devm_* APIs - - - --- 2018-11-04 Slawomir Stepien New
[v2,2/2] iio: adc: meson-saradc: add support for the chip's temperature sensor meson-saradc: add chip temperature support - - - --- 2018-11-03 Martin Blumenstingl New
[v2,1/2] dt-bindings: iio: adc: meson-saradc: add temperature sensor support meson-saradc: add chip temperature support - 1 - --- 2018-11-03 Martin Blumenstingl New
[v3,6/6] staging:iio:ad2s90: Check channel type at read_raw staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-11-03 Matheus Tavares New
[v3,5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-11-03 Matheus Tavares New
[v3,4/6] staging:iio:ad2s90: Move device registration to the end of probe staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-11-03 Matheus Tavares New
[v3,3/6] staging:iio:ad2s90: Remove always overwritten assignment staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-11-03 Matheus Tavares New
[v3,2/6] staging:iio:ad2s90: Make probe handle spi_setup failure staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-11-03 Matheus Tavares New
[v3,1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-11-03 Matheus Tavares New
[v5,3/3] iio: magnetometer: Add driver support for PNI RM3100 Add support for PNI RM3100 magnetometer - - - --- 2018-11-02 Song Qiang New
[v5,2/3] iio: magnetometer: Add DT support for PNI RM3100 Add support for PNI RM3100 magnetometer - 1 - --- 2018-11-02 Song Qiang New
[v5,1/3] dt-bindings: Add PNI to the vendor prefixes. Add support for PNI RM3100 magnetometer - 1 - --- 2018-11-02 Song Qiang New
iio: sx932x: Add driver for Semtech sx932x proximity sensor iio: sx932x: Add driver for Semtech sx932x proximity sensor - - - --- 2018-11-01 Enrico Granata New
[v3,3/3] staging: iio: ad7780: remove unnecessary stashed voltage value staging: iio: ad7780: correct driver read - - - --- 2018-11-01 Renato Lui Geh New
[v3,2/3] staging: iio: ad7780: update voltage on read staging: iio: ad7780: correct driver read - - - --- 2018-11-01 Renato Lui Geh New
[v3,1/3] staging: iio: ad7780: fix offset read value staging: iio: ad7780: correct driver read 1 - - --- 2018-11-01 Renato Lui Geh New
[v7,3/3] staging: iio: ad2s1210: Add device tree table. staging: iio: ad2s1210: Switch to the gpio descriptor interface. - - - --- 2018-10-31 Nishad Kamdar New
[v7,2/3] staging: iio: ad2s1210: Drop the gpioin flag. staging: iio: ad2s1210: Switch to the gpio descriptor interface. - - - --- 2018-10-31 Nishad Kamdar New
[v7,1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface staging: iio: ad2s1210: Switch to the gpio descriptor interface. - - - --- 2018-10-31 Nishad Kamdar New
[v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers [v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers 2 - - --- 2018-10-31 Hans de Goede New
[v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers [v2] iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers 1 - - --- 2018-10-31 Hans de Goede New
[RFC,v1] ACPI / scan: Create platform device for BOSC0200 ACPI nodes [RFC,v1] ACPI / scan: Create platform device for BOSC0200 ACPI nodes - - - --- 2018-10-30 Andy Shevchenko New
iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers 1 - - --- 2018-10-30 Hans de Goede New
[v4,1/1] staging: iio: adc: ad7280a: use devm_* APIs [v4,1/1] staging: iio: adc: ad7280a: use devm_* APIs - - - --- 2018-10-29 Slawomir Stepien New
[v3,3/3] dt-bindings: iio: adc: Add docs for ad7124 [v3,1/3] iio: ad_sigma_delta: Allow to provide custom data register address - - - --- 2018-10-29 Stefan Popa New
[v3,2/3] iio: adc: Add ad7124 support [v3,1/3] iio: ad_sigma_delta: Allow to provide custom data register address - - - --- 2018-10-29 Stefan Popa New
[v3,1/3] iio: ad_sigma_delta: Allow to provide custom data register address [v3,1/3] iio: ad_sigma_delta: Allow to provide custom data register address - - - --- 2018-10-29 Stefan Popa New
[v3,3/3] arm64: zynqmp: DT: Add Xilinx AMS node Add Xilinx AMS Driver - - - --- 2018-10-29 Manish Narani New
[v3,2/3] iio: adc: Add Xilinx AMS driver Add Xilinx AMS Driver - - - --- 2018-10-29 Manish Narani New
[v3,1/3] dt-bindings: iio: adc: Add Xilinx AMS binding documentation Add Xilinx AMS Driver - - - --- 2018-10-29 Manish Narani New
iio:st_magn: enable device after trigger iio:st_magn: enable device after trigger - - 1 --- 2018-10-29 Martin Kelly New
[v2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support [v2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support - - - --- 2018-10-28 Matt Ranostay New
[v4,2/2] dt-bindings: iio: dac: Add ti,dac7311 device tree bindings in documentation [v4,1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311 - 1 - --- 2018-10-28 Couret Charles-Antoine New
[v4,1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311 [v4,1/2] iio:dac:ti-dac7311 Add driver for Texas Instrument DAC7311 - - - --- 2018-10-28 Couret Charles-Antoine New
[7/7] ARM: dts: meson8m2: mxiii-plus: add iio-hwmon for the chip temperature meson-saradc: add chip temperature support - - - --- 2018-10-28 Martin Blumenstingl New
[6/7] ARM: dts: meson8b: odroidc1: add iio-hwmon for the chip temperature meson-saradc: add chip temperature support - - - --- 2018-10-28 Martin Blumenstingl New
[5/7] ARM: dts: meson8b: ec100: add iio-hwmon for the chip temperature meson-saradc: add chip temperature support - - - --- 2018-10-28 Martin Blumenstingl New
[4/7] ARM: dts: meson8b: add the temperature calibration data for the SAR ADC meson-saradc: add chip temperature support - - - --- 2018-10-28 Martin Blumenstingl New
[3/7] ARM: dts: meson8: add the temperature calibration data for the SAR ADC meson-saradc: add chip temperature support - - - --- 2018-10-28 Martin Blumenstingl New
[2/7] iio: adc: meson-saradc: add support for the chip's temperature sensor meson-saradc: add chip temperature support - - - --- 2018-10-28 Martin Blumenstingl New
[1/7] dt-bindings: iio: adc: meson-saradc: add temperature sensor support meson-saradc: add chip temperature support - - - --- 2018-10-28 Martin Blumenstingl New
[v6,3/3] staging: iio: ad2s1210: Add device tree support. staging: iio: ad2s1210: Switch to the gpio descriptor interface. - - - --- 2018-10-28 Nishad Kamdar New
[v6,2/3] staging: iio: ad2s1210: Add device tree table. staging: iio: ad2s1210: Switch to the gpio descriptor interface. - - - --- 2018-10-28 Nishad Kamdar New
[v6,1/3] staging: iio: ad2s1210: Switch to the gpio descriptor interface staging: iio: ad2s1210: Switch to the gpio descriptor interface. - - - --- 2018-10-28 Nishad Kamdar New
[v2,6/6] staging:iio:ad2s90: Check channel type at read_raw staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-27 Matheus Tavares New
[v2,5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-27 Matheus Tavares New
[v2,4/6] staging:iio:ad2s90: Move device registration to the end of probe staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-27 Matheus Tavares New
[v2,3/6] staging:iio:ad2s90: Remove always overwritten assignment staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-27 Matheus Tavares New
[v2,2/6] staging:iio:ad2s90: Make probe handle spi_setup failure staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-27 Matheus Tavares New
[v2,1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-27 Matheus Tavares New
[2/2] iio: pressure: Add support for Honeywell HSC SPI sensors iio: pressure: Add support for Honeywell HSC SPI sensors - - - --- 2018-10-26 Carlos Iglesias New
[1/2] dt-bindings: iio: pressure: Add support for Honeywell HSC SPI sensors iio: pressure: Add support for Honeywell HSC SPI sensors - - - --- 2018-10-26 Carlos Iglesias New
[1/1] staging: iio: adc: ad7280a: don't cast type inside switch expression [1/1] staging: iio: adc: ad7280a: don't cast type inside switch expression - - - --- 2018-10-26 Slawomir Stepien New
[v5,2/2] staging: iio: ad2s1210: Add device tree support. staging: iio: ad2s1210: Switch to the gpio descriptor interface. - - - --- 2018-10-26 Nishad Kamdar New
[v5,1/2] staging: iio: ad2s1210: Switch to the gpio descriptor interface staging: iio: ad2s1210: Switch to the gpio descriptor interface. - - - --- 2018-10-26 Nishad Kamdar New
[v2,4/4] dt-bindings: iio: magn: add LSM9DS1 bindings [v2,1/4] iio: magnetometer: add clarifying comment - 1 - --- 2018-10-26 Martin Kelly New
[v2,3/4] iio:magnetometer: st_magn: add BDU settings [v2,1/4] iio: magnetometer: add clarifying comment - - - --- 2018-10-26 Martin Kelly New
[v2,2/4] iio:magnetometer: st_magn: add LSM9DS1 support [v2,1/4] iio: magnetometer: add clarifying comment - - - --- 2018-10-26 Martin Kelly New
[v2,1/4] iio: magnetometer: add clarifying comment [v2,1/4] iio: magnetometer: add clarifying comment - - - --- 2018-10-26 Martin Kelly New
[6/6] staging:iio:ad2s90: Check channel type at read_raw staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-26 Matheus Tavares New
[5/6] staging:iio:ad2s90: Add IIO_CHAN_INFO_SCALE to channel spec and read_raw staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-26 Matheus Tavares New
[4/6] staging:iio:ad2s90: Move device registration to the end of probe staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-26 Matheus Tavares New
[3/6] staging:iio:ad2s90: Remove always overwritten assignment staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-26 Matheus Tavares New
[2/6] staging:iio:ad2s90: Make probe handle spi_setup failure staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-26 Matheus Tavares New
[1/6] staging:iio:ad2s90: Make read_raw return spi_read's error code staging:iio:ad2s90: Add scale info and improve error handling - - - --- 2018-10-26 Matheus Tavares New
iio:st_magn: enable trigger before enabling sensor iio:st_magn: enable trigger before enabling sensor - - - --- 2018-10-25 Denis CIOCCA New
[v2,2/2] staging: iio: ad7780: fix offset read value staging: iio: ad7780: correct driver read - - - --- 2018-10-25 Renato Lui Geh New
[v2,1/2] staging: iio: ad7780: update voltage on read staging: iio: ad7780: correct driver read - - - --- 2018-10-25 Renato Lui Geh New
[v4,2/2] iio:temperature:max31856:Add device tree bind info [v4,1/2] iio:temperature: Add MAX31856 thermocouple support - - - --- 2018-10-25 Matt Weber New
[v4,1/2] iio:temperature: Add MAX31856 thermocouple support [v4,1/2] iio:temperature: Add MAX31856 thermocouple support - - - --- 2018-10-25 Matt Weber New
[v3,3/3] iio: adc128s052: use SPDX-License-Identifier iio: adc128s052: add matching options - - - --- 2018-10-25 Dan O'Donovan New
[v3,2/3] iio: adc128s052: add ACPI _HID AANT1280 iio: adc128s052: add matching options - - - --- 2018-10-25 Dan O'Donovan New
[v3,1/3] iio: adc128s052: Add pin-compatible IDs iio: adc128s052: add matching options - 1 - --- 2018-10-25 Dan O'Donovan New
staging: iio: ad7780: update voltage on read staging: iio: ad7780: update voltage on read - - - --- 2018-10-25 Renato Lui Geh New
[v4] staging: iio: ad2s1210: Switch to the gpio descriptor interface [v4] staging: iio: ad2s1210: Switch to the gpio descriptor interface - 1 - --- 2018-10-24 Nishad Kamdar New
[2/2] iio: potentiometer: tpl0102: add IIO_AVAIL_RANGE support iio: potentiometer: tpl0102: improve driver to report steps/range - 1 - --- 2018-10-24 Matt Ranostay New
[1/2] iio: potentiometer: tpl0102: switch to using pointer to chip config iio: potentiometer: tpl0102: improve driver to report steps/range - 1 - --- 2018-10-24 Matt Ranostay New
[2/2] dt-bindings: iio: magn: add LSM9DS1 bindings [1/2] iio:magnetometer: st_magn: add LSM9DS1 support - 1 - --- 2018-10-24 Martin Kelly New
[1/2] iio:magnetometer: st_magn: add LSM9DS1 support [1/2] iio:magnetometer: st_magn: add LSM9DS1 support - - - --- 2018-10-24 Martin Kelly New
[v3] staging: iio: ad2s1210: Switch to the gpio descriptor interface [v3] staging: iio: ad2s1210: Switch to the gpio descriptor interface - - - --- 2018-10-23 Nishad Kamdar New
[v5,11/11] mfd: axp20x: Add supported cells for AXP803 AXP8x3 AC and battery power supply support - 1 1 --- 2018-10-23 Oskari Lemmelä New
[v5,10/11] mfd: axp20x: Add AC power supply cell for AXP813 AXP8x3 AC and battery power supply support - 2 1 --- 2018-10-23 Oskari Lemmelä New
[v5,09/11] power: supply: add AC power supply driver for AXP813 AXP8x3 AC and battery power supply support 1 2 - --- 2018-10-23 Oskari Lemmelä New
[v5,08/11] arm64: dts: allwinner: a64: pinebook: enable power supplies AXP8x3 AC and battery power supply support - 1 - --- 2018-10-23 Oskari Lemmelä New
[v5,07/11] arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies AXP8x3 AC and battery power supply support - 2 - --- 2018-10-23 Oskari Lemmelä New
[v5,06/11] arm64: dts: allwinner: axp803: add AC and battery power supplies AXP8x3 AC and battery power supply support - 2 1 --- 2018-10-23 Oskari Lemmelä New
[v5,05/11] ARM: dts: axp81x: add AC power supply subnode AXP8x3 AC and battery power supply support - 2 1 --- 2018-10-23 Oskari Lemmelä New
[v5,04/11] dt-bindings: iio: adc: add AXP803 ADC bindings AXP8x3 AC and battery power supply support - 1 - --- 2018-10-23 Oskari Lemmelä New
[v5,03/11] dt-bindings: gpio: gpio-axp209: add AXP803 GPIO bindings AXP8x3 AC and battery power supply support - 1 - --- 2018-10-23 Oskari Lemmelä New
[v5,02/11] dt-bindings: power: supply: axp20x: add AXP803 power bindings AXP8x3 AC and battery power supply support - 1 - --- 2018-10-23 Oskari Lemmelä New
[v5,01/11] dt-bindings: power: supply: axp20x: add AXP813 AC power DT binding AXP8x3 AC and battery power supply support - 4 1 --- 2018-10-23 Oskari Lemmelä New
« 1 2 ... 68 69 70 … 89 90 »