| Message ID | 1505746398-13934-4-git-send-email-thierry.escande@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, 18 Sep 2017 16:53:17 +0200 Thierry Escande <thierry.escande@collabora.com> wrote: > From: Gwendal Grignou <gwendal@chromium.org> > > Add driver to support older EC firmware that only support deprecated > ec command. Rely on ACPI memory map register to access sensor > information. > Present same interface as the regular cros_ec sensor stack: > - one iio device per accelerometer > - use HTML5 axis definition > - use iio abi units > - accept calibration calls, but do nothing > Chrome can use the same code than regular cros_ec sensor stack to > calculate orientation and lid angle. > > Signed-off-by: Gwendal Grignou <gwendal@chromium.org> > Signed-off-by: Thierry Escande <thierry.escande@collabora.com> A few minor bits and pieces inline. Jonathan > --- > drivers/iio/accel/Kconfig | 11 + > drivers/iio/accel/Makefile | 2 + > drivers/iio/accel/cros_ec_accel_legacy.c | 444 +++++++++++++++++++++++++++++++ > 3 files changed, 457 insertions(+) > create mode 100644 drivers/iio/accel/cros_ec_accel_legacy.c > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > index 15de262..5a1ef29 100644 > --- a/drivers/iio/accel/Kconfig > +++ b/drivers/iio/accel/Kconfig > @@ -148,6 +148,17 @@ config HID_SENSOR_ACCEL_3D > To compile this driver as a module, choose M here: the > module will be called hid-sensor-accel-3d. > > +config IIO_CROS_EC_ACCEL_LEGACY > + tristate "ChromeOS EC Legacy Accelerometer Sensor" > + select IIO_BUFFER > + select IIO_TRIGGERED_BUFFER > + select CROS_EC_LPC_REGISTER_DEVICE > + help > + Say yes here to get support for accelerometers on Chromebook using > + legacy EC firmware. > + Sensor data is retrieved through IO memory. > + Newer devices should use IIO_CROS_EC_SENSORS. > + > config IIO_ST_ACCEL_3AXIS > tristate "STMicroelectronics accelerometers 3-Axis Driver" > depends on (I2C || SPI_MASTER) && SYSFS > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile > index 31fba19..fdd054a 100644 > --- a/drivers/iio/accel/Makefile > +++ b/drivers/iio/accel/Makefile > @@ -43,6 +43,8 @@ obj-$(CONFIG_SCA3000) += sca3000.o > obj-$(CONFIG_STK8312) += stk8312.o > obj-$(CONFIG_STK8BA50) += stk8ba50.o > > +obj-$(CONFIG_IIO_CROS_EC_ACCEL_LEGACY) += cros_ec_accel_legacy.o > + > obj-$(CONFIG_IIO_SSP_SENSORS_COMMONS) += ssp_accel_sensor.o > > obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o > diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c > new file mode 100644 > index 0000000..26e71a1 > --- /dev/null > +++ b/drivers/iio/accel/cros_ec_accel_legacy.c > @@ -0,0 +1,444 @@ > +/* > + * Driver for older Chrome OS EC accelerometer > + * > + * Copyright 2017 Google, Inc > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * This driver uses the memory mapper cros-ec interface to communicate > + * with the Chrome OS EC about accelerometer data. > + * Accelerometer access is presented through iio sysfs. > + */ > + > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/iio/buffer.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/kfifo_buf.h> > +#include <linux/iio/trigger_consumer.h> > +#include <linux/iio/triggered_buffer.h> > +#include <linux/kernel.h> > +#include <linux/mfd/cros_ec.h> > +#include <linux/mfd/cros_ec_commands.h> > +#include <linux/module.h> > +#include <linux/slab.h> > +#include <linux/sysfs.h> > +#include <linux/platform_device.h> > + > +#define DRV_NAME "cros-ec-accel-legacy" > + > +/* Indices for EC sensor values. */ > +enum { > + X, > + Y, > + Z, > + MAX_AXIS, > +}; > + > +struct cros_ec_accel_legacy_state; > +static ssize_t cros_ec_accel_legacy_id(struct iio_dev *indio_dev, > + uintptr_t private, > + const struct iio_chan_spec *chan, > + char *buf); Wouldn't a bit of reorganizing of the code remove the necessity to have these forward declarations? > + > +static ssize_t cros_ec_accel_legacy_loc(struct iio_dev *indio_dev, > + uintptr_t private, > + const struct iio_chan_spec *chan, > + char *buf); > + > +static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = { > + { > + .name = "id", Sysfs attributes all need documenting... Documentation/ABI/testing/sysfs_bus_iio_cross_ec location is there, but this legacy id isn't. > + .shared = IIO_SHARED_BY_ALL, > + .read = cros_ec_accel_legacy_id, > + }, > + { > + .name = "location", > + .shared = IIO_SHARED_BY_ALL, > + .read = cros_ec_accel_legacy_loc, > + }, > + { } > +}; > + > +#define CROS_EC_ACCEL_LEGACY_CHAN(_axis) \ > + { \ > + .type = IIO_ACCEL, \ > + .channel2 = IIO_MOD_X + (_axis), \ > + .modified = 1, \ > + .info_mask_separate = \ > + BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_CALIBSCALE) | \ > + BIT(IIO_CHAN_INFO_CALIBBIAS), \ > + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE), \ > + .ext_info = cros_ec_accel_legacy_ext_info, \ > + .scan_type = { \ > + .sign = 's', \ > + .realbits = 16, \ > + .storagebits = 16, \ > + .shift = 0, \ Shift of 0 is a fairly obvious default so don't specify it. > + }, \ > + } \ > + > +static struct iio_chan_spec ec_accel_channels[] = { > + CROS_EC_ACCEL_LEGACY_CHAN(X), > + CROS_EC_ACCEL_LEGACY_CHAN(Y), > + CROS_EC_ACCEL_LEGACY_CHAN(Z), > + IIO_CHAN_SOFT_TIMESTAMP(MAX_AXIS) > +}; > + > +/* State data for cros_ec_accel_legacy iio driver. */ > +struct cros_ec_accel_legacy_state { > + struct cros_ec_device *ec; > + > + /* > + * Static array to hold data from a single capture. For each > + * channel we need 2 bytes, except for the timestamp. The timestamp > + * is always last and is always 8-byte aligned. > + */ > + union { > + s16 samples[MAX_AXIS]; > + u64 ts[DIV_ROUND_UP(ARRAY_SIZE(ec_accel_channels), > + sizeof(u64) / sizeof(u16)) + 1]; > + } capture_data; > + s8 sign[MAX_AXIS]; > + u8 sensor_num; > +}; > + > +static int ec_cmd_read_u8(struct cros_ec_device *ec, unsigned int offset, > + u8 *dest) > +{ > + return ec->cmd_readmem(ec, offset, 1, dest); > +} > + > +static int ec_cmd_read_u16(struct cros_ec_device *ec, unsigned int offset, > + u16 *dest) > +{ > + u16 tmp; > + int ret = ec->cmd_readmem(ec, offset, 2, &tmp); > + > + *dest = le16_to_cpu(tmp); > + > + return ret; > +} > + > +/** > + * read_ec_until_not_busy - read from EC status byte until it reads not busy. > + * > + * @st Pointer to state information for device. > + * @return 8-bit status if ok, -ve on error > + */ > +static int read_ec_until_not_busy(struct cros_ec_accel_legacy_state *st) > +{ > + struct cros_ec_device *ec = st->ec; > + u8 status; > + int attempts = 0; > + > + ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); > + while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) { > + /* Give up after enough attempts, return error. */ > + if (attempts++ >= 50) > + return -EIO; > + > + /* Small delay every so often. */ > + if (attempts % 5 == 0) > + msleep(25); > + > + ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); > + } > + > + return status; > +} > + > +/** > + * read_ec_accel_data_unsafe - read acceleration data from EC shared memory. > + * > + * @st Pointer to state information for device. > + * @scan_mask Bitmap of the sensor indices to scan. > + * @data Location to store data. > + * > + * Note this is the unsafe function for reading the EC data. It does not > + * guarantee that the EC will not modify the data as it is being read in. > + */ > +static void read_ec_accel_data_unsafe(struct cros_ec_accel_legacy_state *st, > + unsigned long scan_mask, s16 *data) > +{ > + int i = 0; > + int num_enabled = bitmap_weight(&scan_mask, MAX_AXIS); > + > + /* > + * Read all sensors enabled in scan_mask. Each value is 2 > + * bytes. > + */ > + while (num_enabled--) { > + i = find_next_bit(&scan_mask, MAX_AXIS, i); > + ec_cmd_read_u16( > + st->ec, > + EC_MEMMAP_ACC_DATA + > + sizeof(s16) * > + (1 + i + st->sensor_num * MAX_AXIS), > + data); > + *data *= st->sign[i]; > + i++; > + data++; > + } > +} > + > +/** > + * read_ec_accel_data - read acceleration data from EC shared memory. > + * > + * @st Pointer to state information for device. > + * @scan_mask Bitmap of the sensor indices to scan. > + * @data Location to store data. > + * @return 0 if ok, -ve on error > + * > + * Note: this is the safe function for reading the EC data. It guarantees > + * that the data sampled was not modified by the EC while being read. > + */ > +static int read_ec_accel_data(struct cros_ec_accel_legacy_state *st, > + unsigned long scan_mask, s16 *data) > +{ > + u8 samp_id = 0xff; > + u8 status = 0; > + int rv; Given rest of the driver uses ret for this purpose, perhaps here as well? > + int attempts = 0; > + > + /* > + * Continually read all data from EC until the status byte after > + * all reads reflects that the EC is not busy and the sample id > + * matches the sample id from before all reads. This guarantees > + * that data read in was not modified by the EC while reading. > + */ Nasty ;) You have my sympathies. > + while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT | > + EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) { > + /* If we have tried to read too many times, return error. */ > + if (attempts++ >= 5) > + return -EIO; > + > + /* Read status byte until EC is not busy. */ > + rv = read_ec_until_not_busy(st); > + if (rv < 0) > + return rv; > + status = rv; > + > + /* > + * Store the current sample id so that we can compare to the > + * sample id after reading the data. > + */ > + samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK; > + > + /* Read all EC data, format it, and store it into data. */ > + read_ec_accel_data_unsafe(st, scan_mask, data); > + > + /* Read status byte. */ > + ec_cmd_read_u8(st->ec, EC_MEMMAP_ACC_STATUS, &status); > + } > + > + return 0; > +} > + > +static int cros_ec_accel_legacy_read(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > + s16 data = 0; > + int ret = IIO_VAL_INT; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + ret = read_ec_accel_data(st, (1 << chan->scan_index), &data); > + if (ret) > + return ret; > + *val = data; > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SCALE: > + /* Sensor scale hard coded at 10 bits per g. */ > + *val = 0; > + *val2 = IIO_G_TO_M_S_2(1024); > + return IIO_VAL_INT_PLUS_MICRO; > + case IIO_CHAN_INFO_CALIBBIAS: > + /* Calibration not supported. */ > + *val = 0; > + return IIO_VAL_INT; > + default: > + return -EINVAL; > + } > +} > + > +static int cros_ec_accel_legacy_write(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + int ret = 0; > + > + switch (mask) { > + case IIO_CHAN_INFO_CALIBBIAS: > + /* Do nothing, to allow calibration script to work. */ > + break; return 0; > + default: return -EINVAL; Would be cleaner perhaps? > + ret = -EINVAL; > + break; > + } > + > + return ret; > +} > + > +static const struct iio_info cros_ec_accel_legacy_info = { > + .read_raw = &cros_ec_accel_legacy_read, > + .write_raw = &cros_ec_accel_legacy_write, > + .driver_module = THIS_MODULE, .driver_module field recently removed in favour or registration time macro magic. I'll clean this up when applying. > +}; > + > +/** > + * accel_capture - the trigger handler function > + * > + * @irq: the interrupt number > + * @p: private data - always a pointer to the poll func. > + * > + * On a trigger event occurring, if the pollfunc is attached then this > + * handler is called as a threaded interrupt (and hence may sleep). It > + * is responsible for grabbing data from the device and pushing it into > + * the associated buffer. > + */ > +static irqreturn_t cros_ec_accel_legacy_capture(int irq, void *p) > +{ > + struct iio_poll_func *pf = p; > + struct iio_dev *indio_dev = pf->indio_dev; > + struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > + > + /* Clear capture data. */ > + memset(st->capture_data.samples, 0, sizeof(st->capture_data)); > + > + /* > + * Read data based on which channels are enabled in scan mask. Note > + * that on a capture we are always reading the calibrated data. > + */ > + read_ec_accel_data(st, *indio_dev->active_scan_mask, > + st->capture_data.samples); > + > + /* Store the timestamp last 8 bytes of data. */ > + if (indio_dev->scan_timestamp) > + st->capture_data.ts[(indio_dev->scan_bytes - 1) / sizeof(s64)] = > + iio_get_time_ns(indio_dev); > + > + iio_push_to_buffers(indio_dev, (u8 *)st->capture_data.samples); Why not use iio_push_to_buffers_with_timestamp which will handle the alignment etc for you. > + > + /* > + * Tell the core we are done with this trigger and ready for the > + * next one. > + */ > + iio_trigger_notify_done(indio_dev->trig); > + > + return IRQ_HANDLED; > +} > + > +static char *cros_ec_accel_legacy_loc_strings[] = { > + [MOTIONSENSE_LOC_BASE] = "base", > + [MOTIONSENSE_LOC_LID] = "lid", > + [MOTIONSENSE_LOC_MAX] = "unknown", > +}; > + > +static ssize_t cros_ec_accel_legacy_loc(struct iio_dev *indio_dev, > + uintptr_t private, > + const struct iio_chan_spec *chan, > + char *buf) > +{ > + struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > + > + return sprintf(buf, "%s\n", > + cros_ec_accel_legacy_loc_strings[st->sensor_num + > + MOTIONSENSE_LOC_BASE]); > +} > + > +static ssize_t cros_ec_accel_legacy_id(struct iio_dev *indio_dev, > + uintptr_t private, > + const struct iio_chan_spec *chan, > + char *buf) > +{ > + struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); > + > + return sprintf(buf, "%d\n", st->sensor_num); > +} > + > +static int cros_ec_accel_legacy_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct cros_ec_dev *ec = dev_get_drvdata(dev->parent); > + struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev); > + struct iio_dev *indio_dev; > + struct cros_ec_accel_legacy_state *state; > + int ret, i; > + > + if (!ec || !ec->ec_dev) { > + dev_warn(&pdev->dev, "No EC device found.\n"); > + return -EINVAL; > + } > + > + if (!ec->ec_dev->cmd_readmem) { > + dev_warn(&pdev->dev, "EC does not support direct reads.\n"); > + return -EINVAL; > + } > + > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state)); > + if (!indio_dev) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, indio_dev); > + state = iio_priv(indio_dev); > + state->ec = ec->ec_dev; > + state->sensor_num = sensor_platform->sensor_num; > + > + indio_dev->dev.parent = dev; > + indio_dev->name = pdev->name; > + indio_dev->channels = ec_accel_channels; > + /* > + * Present the channel using HTML5 standard: > + * need to invert X and Y and invert some lid axis. > + */ > + for (i = X ; i < MAX_AXIS; i++) { > + switch (i) { > + case X: > + ec_accel_channels[X].scan_index = Y; > + case Y: > + ec_accel_channels[Y].scan_index = X; > + case Z: > + ec_accel_channels[Z].scan_index = Z; > + } > + if (state->sensor_num == MOTIONSENSE_LOC_LID && i != Y) > + state->sign[i] = -1; > + else > + state->sign[i] = 1; > + } > + indio_dev->num_channels = ARRAY_SIZE(ec_accel_channels); > + indio_dev->dev.parent = &pdev->dev; > + indio_dev->info = &cros_ec_accel_legacy_info; > + indio_dev->modes = INDIO_DIRECT_MODE; > + > + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, > + cros_ec_accel_legacy_capture, > + NULL); > + if (ret) > + return ret; > + > + return devm_iio_device_register(dev, indio_dev); > +} > + > +static struct platform_driver cros_ec_accel_platform_driver = { > + .driver = { > + .name = DRV_NAME, > + }, > + .probe = cros_ec_accel_legacy_probe, > +}; > +module_platform_driver(cros_ec_accel_platform_driver); > + > +MODULE_DESCRIPTION("ChromeOS EC legacy accelerometer driver"); > +MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>"); > +MODULE_LICENSE("GPL"); > +MODULE_ALIAS("platform:" DRV_NAME); -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 15de262..5a1ef29 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -148,6 +148,17 @@ config HID_SENSOR_ACCEL_3D To compile this driver as a module, choose M here: the module will be called hid-sensor-accel-3d. +config IIO_CROS_EC_ACCEL_LEGACY + tristate "ChromeOS EC Legacy Accelerometer Sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select CROS_EC_LPC_REGISTER_DEVICE + help + Say yes here to get support for accelerometers on Chromebook using + legacy EC firmware. + Sensor data is retrieved through IO memory. + Newer devices should use IIO_CROS_EC_SENSORS. + config IIO_ST_ACCEL_3AXIS tristate "STMicroelectronics accelerometers 3-Axis Driver" depends on (I2C || SPI_MASTER) && SYSFS diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 31fba19..fdd054a 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -43,6 +43,8 @@ obj-$(CONFIG_SCA3000) += sca3000.o obj-$(CONFIG_STK8312) += stk8312.o obj-$(CONFIG_STK8BA50) += stk8ba50.o +obj-$(CONFIG_IIO_CROS_EC_ACCEL_LEGACY) += cros_ec_accel_legacy.o + obj-$(CONFIG_IIO_SSP_SENSORS_COMMONS) += ssp_accel_sensor.o obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c new file mode 100644 index 0000000..26e71a1 --- /dev/null +++ b/drivers/iio/accel/cros_ec_accel_legacy.c @@ -0,0 +1,444 @@ +/* + * Driver for older Chrome OS EC accelerometer + * + * Copyright 2017 Google, Inc + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver uses the memory mapper cros-ec interface to communicate + * with the Chrome OS EC about accelerometer data. + * Accelerometer access is presented through iio sysfs. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/kernel.h> +#include <linux/mfd/cros_ec.h> +#include <linux/mfd/cros_ec_commands.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/platform_device.h> + +#define DRV_NAME "cros-ec-accel-legacy" + +/* Indices for EC sensor values. */ +enum { + X, + Y, + Z, + MAX_AXIS, +}; + +struct cros_ec_accel_legacy_state; +static ssize_t cros_ec_accel_legacy_id(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf); + +static ssize_t cros_ec_accel_legacy_loc(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf); + +static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = { + { + .name = "id", + .shared = IIO_SHARED_BY_ALL, + .read = cros_ec_accel_legacy_id, + }, + { + .name = "location", + .shared = IIO_SHARED_BY_ALL, + .read = cros_ec_accel_legacy_loc, + }, + { } +}; + +#define CROS_EC_ACCEL_LEGACY_CHAN(_axis) \ + { \ + .type = IIO_ACCEL, \ + .channel2 = IIO_MOD_X + (_axis), \ + .modified = 1, \ + .info_mask_separate = \ + BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_CALIBSCALE) | \ + BIT(IIO_CHAN_INFO_CALIBBIAS), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = cros_ec_accel_legacy_ext_info, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .shift = 0, \ + }, \ + } \ + +static struct iio_chan_spec ec_accel_channels[] = { + CROS_EC_ACCEL_LEGACY_CHAN(X), + CROS_EC_ACCEL_LEGACY_CHAN(Y), + CROS_EC_ACCEL_LEGACY_CHAN(Z), + IIO_CHAN_SOFT_TIMESTAMP(MAX_AXIS) +}; + +/* State data for cros_ec_accel_legacy iio driver. */ +struct cros_ec_accel_legacy_state { + struct cros_ec_device *ec; + + /* + * Static array to hold data from a single capture. For each + * channel we need 2 bytes, except for the timestamp. The timestamp + * is always last and is always 8-byte aligned. + */ + union { + s16 samples[MAX_AXIS]; + u64 ts[DIV_ROUND_UP(ARRAY_SIZE(ec_accel_channels), + sizeof(u64) / sizeof(u16)) + 1]; + } capture_data; + s8 sign[MAX_AXIS]; + u8 sensor_num; +}; + +static int ec_cmd_read_u8(struct cros_ec_device *ec, unsigned int offset, + u8 *dest) +{ + return ec->cmd_readmem(ec, offset, 1, dest); +} + +static int ec_cmd_read_u16(struct cros_ec_device *ec, unsigned int offset, + u16 *dest) +{ + u16 tmp; + int ret = ec->cmd_readmem(ec, offset, 2, &tmp); + + *dest = le16_to_cpu(tmp); + + return ret; +} + +/** + * read_ec_until_not_busy - read from EC status byte until it reads not busy. + * + * @st Pointer to state information for device. + * @return 8-bit status if ok, -ve on error + */ +static int read_ec_until_not_busy(struct cros_ec_accel_legacy_state *st) +{ + struct cros_ec_device *ec = st->ec; + u8 status; + int attempts = 0; + + ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); + while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) { + /* Give up after enough attempts, return error. */ + if (attempts++ >= 50) + return -EIO; + + /* Small delay every so often. */ + if (attempts % 5 == 0) + msleep(25); + + ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); + } + + return status; +} + +/** + * read_ec_accel_data_unsafe - read acceleration data from EC shared memory. + * + * @st Pointer to state information for device. + * @scan_mask Bitmap of the sensor indices to scan. + * @data Location to store data. + * + * Note this is the unsafe function for reading the EC data. It does not + * guarantee that the EC will not modify the data as it is being read in. + */ +static void read_ec_accel_data_unsafe(struct cros_ec_accel_legacy_state *st, + unsigned long scan_mask, s16 *data) +{ + int i = 0; + int num_enabled = bitmap_weight(&scan_mask, MAX_AXIS); + + /* + * Read all sensors enabled in scan_mask. Each value is 2 + * bytes. + */ + while (num_enabled--) { + i = find_next_bit(&scan_mask, MAX_AXIS, i); + ec_cmd_read_u16( + st->ec, + EC_MEMMAP_ACC_DATA + + sizeof(s16) * + (1 + i + st->sensor_num * MAX_AXIS), + data); + *data *= st->sign[i]; + i++; + data++; + } +} + +/** + * read_ec_accel_data - read acceleration data from EC shared memory. + * + * @st Pointer to state information for device. + * @scan_mask Bitmap of the sensor indices to scan. + * @data Location to store data. + * @return 0 if ok, -ve on error + * + * Note: this is the safe function for reading the EC data. It guarantees + * that the data sampled was not modified by the EC while being read. + */ +static int read_ec_accel_data(struct cros_ec_accel_legacy_state *st, + unsigned long scan_mask, s16 *data) +{ + u8 samp_id = 0xff; + u8 status = 0; + int rv; + int attempts = 0; + + /* + * Continually read all data from EC until the status byte after + * all reads reflects that the EC is not busy and the sample id + * matches the sample id from before all reads. This guarantees + * that data read in was not modified by the EC while reading. + */ + while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT | + EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) { + /* If we have tried to read too many times, return error. */ + if (attempts++ >= 5) + return -EIO; + + /* Read status byte until EC is not busy. */ + rv = read_ec_until_not_busy(st); + if (rv < 0) + return rv; + status = rv; + + /* + * Store the current sample id so that we can compare to the + * sample id after reading the data. + */ + samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK; + + /* Read all EC data, format it, and store it into data. */ + read_ec_accel_data_unsafe(st, scan_mask, data); + + /* Read status byte. */ + ec_cmd_read_u8(st->ec, EC_MEMMAP_ACC_STATUS, &status); + } + + return 0; +} + +static int cros_ec_accel_legacy_read(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); + s16 data = 0; + int ret = IIO_VAL_INT; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = read_ec_accel_data(st, (1 << chan->scan_index), &data); + if (ret) + return ret; + *val = data; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* Sensor scale hard coded at 10 bits per g. */ + *val = 0; + *val2 = IIO_G_TO_M_S_2(1024); + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_CALIBBIAS: + /* Calibration not supported. */ + *val = 0; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int cros_ec_accel_legacy_write(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int ret = 0; + + switch (mask) { + case IIO_CHAN_INFO_CALIBBIAS: + /* Do nothing, to allow calibration script to work. */ + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static const struct iio_info cros_ec_accel_legacy_info = { + .read_raw = &cros_ec_accel_legacy_read, + .write_raw = &cros_ec_accel_legacy_write, + .driver_module = THIS_MODULE, +}; + +/** + * accel_capture - the trigger handler function + * + * @irq: the interrupt number + * @p: private data - always a pointer to the poll func. + * + * On a trigger event occurring, if the pollfunc is attached then this + * handler is called as a threaded interrupt (and hence may sleep). It + * is responsible for grabbing data from the device and pushing it into + * the associated buffer. + */ +static irqreturn_t cros_ec_accel_legacy_capture(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); + + /* Clear capture data. */ + memset(st->capture_data.samples, 0, sizeof(st->capture_data)); + + /* + * Read data based on which channels are enabled in scan mask. Note + * that on a capture we are always reading the calibrated data. + */ + read_ec_accel_data(st, *indio_dev->active_scan_mask, + st->capture_data.samples); + + /* Store the timestamp last 8 bytes of data. */ + if (indio_dev->scan_timestamp) + st->capture_data.ts[(indio_dev->scan_bytes - 1) / sizeof(s64)] = + iio_get_time_ns(indio_dev); + + iio_push_to_buffers(indio_dev, (u8 *)st->capture_data.samples); + + /* + * Tell the core we are done with this trigger and ready for the + * next one. + */ + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static char *cros_ec_accel_legacy_loc_strings[] = { + [MOTIONSENSE_LOC_BASE] = "base", + [MOTIONSENSE_LOC_LID] = "lid", + [MOTIONSENSE_LOC_MAX] = "unknown", +}; + +static ssize_t cros_ec_accel_legacy_loc(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); + + return sprintf(buf, "%s\n", + cros_ec_accel_legacy_loc_strings[st->sensor_num + + MOTIONSENSE_LOC_BASE]); +} + +static ssize_t cros_ec_accel_legacy_id(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", st->sensor_num); +} + +static int cros_ec_accel_legacy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct cros_ec_dev *ec = dev_get_drvdata(dev->parent); + struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev); + struct iio_dev *indio_dev; + struct cros_ec_accel_legacy_state *state; + int ret, i; + + if (!ec || !ec->ec_dev) { + dev_warn(&pdev->dev, "No EC device found.\n"); + return -EINVAL; + } + + if (!ec->ec_dev->cmd_readmem) { + dev_warn(&pdev->dev, "EC does not support direct reads.\n"); + return -EINVAL; + } + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + platform_set_drvdata(pdev, indio_dev); + state = iio_priv(indio_dev); + state->ec = ec->ec_dev; + state->sensor_num = sensor_platform->sensor_num; + + indio_dev->dev.parent = dev; + indio_dev->name = pdev->name; + indio_dev->channels = ec_accel_channels; + /* + * Present the channel using HTML5 standard: + * need to invert X and Y and invert some lid axis. + */ + for (i = X ; i < MAX_AXIS; i++) { + switch (i) { + case X: + ec_accel_channels[X].scan_index = Y; + case Y: + ec_accel_channels[Y].scan_index = X; + case Z: + ec_accel_channels[Z].scan_index = Z; + } + if (state->sensor_num == MOTIONSENSE_LOC_LID && i != Y) + state->sign[i] = -1; + else + state->sign[i] = 1; + } + indio_dev->num_channels = ARRAY_SIZE(ec_accel_channels); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &cros_ec_accel_legacy_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + cros_ec_accel_legacy_capture, + NULL); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static struct platform_driver cros_ec_accel_platform_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = cros_ec_accel_legacy_probe, +}; +module_platform_driver(cros_ec_accel_platform_driver); + +MODULE_DESCRIPTION("ChromeOS EC legacy accelerometer driver"); +MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME);