| Message ID | 1512150020-20335-8-git-send-email-arnaud.pouliquen@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 1 Dec 2017 18:40:14 +0100 Arnaud Pouliquen <arnaud.pouliquen@st.com> wrote: > Add bindings that describes STM32 Digital Filter for Sigma Delta > Modulators. DFSDM allows to connect sigma delta > modulators. > > Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> > Acked-by: Rob Herring <robh@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > --- > .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 127 +++++++++++++++++++++ > 1 file changed, 127 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt > > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt > new file mode 100644 > index 0000000..4a42d76 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt > @@ -0,0 +1,127 @@ > +STMicroelectronics STM32 DFSDM ADC device driver > + > + > +STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to > +interface external sigma delta modulators to STM32 micro controllers. > +It is mainly targeted for: > +- Sigma delta modulators (motor control, metering...) > +- PDM microphones (audio digital microphone) > + > +It features up to 8 serial digital interfaces (SPI or Manchester) and > +up to 4 filters on stm32h7. > + > +Each child node match with a filter instance. > + > +Contents of a STM32 DFSDM root node: > +------------------------------------ > +Required properties: > +- compatible: Should be "st,stm32h7-dfsdm". > +- reg: Offset and length of the DFSDM block register set. > +- clocks: IP and serial interfaces clocking. Should be set according > + to rcc clock ID and "clock-names". > +- clock-names: Input clock name "dfsdm" must be defined, > + "audio" is optional. If defined CLKOUT is based on the audio > + clock, else "dfsdm" is used. > +- #interrupt-cells = <1>; > +- #address-cells = <1>; > +- #size-cells = <0>; > + > +Optional properties: > +- spi-max-frequency: Requested only for SPI master mode. > + SPI clock OUT frequency (Hz). This clock must be set according > + to "clock" property. Frequency must be a multiple of the rcc > + clock frequency. If not, SPI CLKOUT frequency will not be > + accurate. > + > +Contents of a STM32 DFSDM child nodes: > +-------------------------------------- > + > +Required properties: > +- compatible: Must be: > + "st,stm32-dfsdm-adc" for sigma delta ADCs > + "st,stm32-dfsdm-dmic" for audio digital microphone. > +- reg: Specifies the DFSDM filter instance used. > +- interrupts: IRQ lines connected to each DFSDM filter instance. > +- st,adc-channels: List of single-ended channels muxed for this ADC. > + valid values: > + "st,stm32h7-dfsdm" compatibility: 0 to 7. > +- st,adc-channel-names: List of single-ended channel names. > +- st,filter-order: SinC filter order from 0 to 5. > + 0: FastSinC > + [1-5]: order 1 to 5. > + For audio purpose it is recommended to use order 3 to 5. > +- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". > + > +Required properties for "st,stm32-dfsdm-adc" compatibility: > +- io-channels: From common IIO binding. Used to pipe external sigma delta > + modulator or internal ADC output to DFSDM channel. > + This is not required for "st,stm32-dfsdm-pdm" compatibility as > + PDM microphone is binded in Audio DT node. > + > +Required properties for "st,stm32-dfsdm-pdm" compatibility: > +- #sound-dai-cells: Must be set to 0. > +- dma: DMA controller phandle and DMA request line associated to the > + filter instance (specified by the field "reg") > +- dma-names: Must be "rx" > + > +Optional properties: > +- st,adc-channel-types: Single-ended channel input type. > + - "SPI_R": SPI with data on rising edge (default) > + - "SPI_F": SPI with data on falling edge > + - "MANCH_R": manchester codec, rising edge = logic 0 > + - "MANCH_F": manchester codec, falling edge = logic 1 > +- st,adc-channel-clk-src: Conversion clock source. > + - "CLKIN": external SPI clock (CLKIN x) > + - "CLKOUT": internal SPI clock (CLKOUT) (default) > + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). > + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). > + > +- st,adc-alt-channel: Must be defined if two sigma delta modulator are > + connected on same SPI input. > + If not set, channel n is connected to SPI input n. > + If set, channel n is connected to SPI input n + 1. > + > +- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0. > + Used for multi microphones synchronization. > + > +Example of a sigma delta adc connected on DFSDM SPI port 0 > +and a pdm microphone connected on DFSDM SPI port 1: > + > + ads1202: simple_sd_adc@0 { > + compatible = "ads1202"; > + #io-channel-cells = <1>; > + }; > + > + dfsdm: dfsdm@40017000 { > + compatible = "st,stm32h7-dfsdm"; > + reg = <0x40017000 0x400>; > + clocks = <&rcc DFSDM1_CK>; > + clock-names = "dfsdm"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + dfsdm_adc0: dfsdm-adc@0 { > + compatible = "st,stm32-dfsdm-adc"; > + #io-channel-cells = <1>; > + reg = <0>; > + interrupts = <110>; > + st,adc-channels = <0>; > + st,adc-channel-names = "sd_adc0"; > + st,adc-channel-types = "SPI_F"; > + st,adc-channel-clk-src = "CLKOUT"; > + io-channels = <&ads1202 0>; > + st,filter-order = <3>; > + }; > + dfsdm_pdm1: dfsdm-pdm@1 { > + compatible = "st,stm32-dfsdm-dmic"; > + reg = <1>; > + interrupts = <111>; > + dmas = <&dmamux1 102 0x400 0x00>; > + dma-names = "rx"; > + st,adc-channels = <1>; > + st,adc-channel-names = "dmic1"; > + st,adc-channel-types = "SPI_R"; > + st,adc-channel-clk-src = "CLKOUT"; > + st,filter-order = <5>; > + }; > + } -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt new file mode 100644 index 0000000..4a42d76 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt @@ -0,0 +1,127 @@ +STMicroelectronics STM32 DFSDM ADC device driver + + +STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to +interface external sigma delta modulators to STM32 micro controllers. +It is mainly targeted for: +- Sigma delta modulators (motor control, metering...) +- PDM microphones (audio digital microphone) + +It features up to 8 serial digital interfaces (SPI or Manchester) and +up to 4 filters on stm32h7. + +Each child node match with a filter instance. + +Contents of a STM32 DFSDM root node: +------------------------------------ +Required properties: +- compatible: Should be "st,stm32h7-dfsdm". +- reg: Offset and length of the DFSDM block register set. +- clocks: IP and serial interfaces clocking. Should be set according + to rcc clock ID and "clock-names". +- clock-names: Input clock name "dfsdm" must be defined, + "audio" is optional. If defined CLKOUT is based on the audio + clock, else "dfsdm" is used. +- #interrupt-cells = <1>; +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- spi-max-frequency: Requested only for SPI master mode. + SPI clock OUT frequency (Hz). This clock must be set according + to "clock" property. Frequency must be a multiple of the rcc + clock frequency. If not, SPI CLKOUT frequency will not be + accurate. + +Contents of a STM32 DFSDM child nodes: +-------------------------------------- + +Required properties: +- compatible: Must be: + "st,stm32-dfsdm-adc" for sigma delta ADCs + "st,stm32-dfsdm-dmic" for audio digital microphone. +- reg: Specifies the DFSDM filter instance used. +- interrupts: IRQ lines connected to each DFSDM filter instance. +- st,adc-channels: List of single-ended channels muxed for this ADC. + valid values: + "st,stm32h7-dfsdm" compatibility: 0 to 7. +- st,adc-channel-names: List of single-ended channel names. +- st,filter-order: SinC filter order from 0 to 5. + 0: FastSinC + [1-5]: order 1 to 5. + For audio purpose it is recommended to use order 3 to 5. +- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". + +Required properties for "st,stm32-dfsdm-adc" compatibility: +- io-channels: From common IIO binding. Used to pipe external sigma delta + modulator or internal ADC output to DFSDM channel. + This is not required for "st,stm32-dfsdm-pdm" compatibility as + PDM microphone is binded in Audio DT node. + +Required properties for "st,stm32-dfsdm-pdm" compatibility: +- #sound-dai-cells: Must be set to 0. +- dma: DMA controller phandle and DMA request line associated to the + filter instance (specified by the field "reg") +- dma-names: Must be "rx" + +Optional properties: +- st,adc-channel-types: Single-ended channel input type. + - "SPI_R": SPI with data on rising edge (default) + - "SPI_F": SPI with data on falling edge + - "MANCH_R": manchester codec, rising edge = logic 0 + - "MANCH_F": manchester codec, falling edge = logic 1 +- st,adc-channel-clk-src: Conversion clock source. + - "CLKIN": external SPI clock (CLKIN x) + - "CLKOUT": internal SPI clock (CLKOUT) (default) + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). + +- st,adc-alt-channel: Must be defined if two sigma delta modulator are + connected on same SPI input. + If not set, channel n is connected to SPI input n. + If set, channel n is connected to SPI input n + 1. + +- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0. + Used for multi microphones synchronization. + +Example of a sigma delta adc connected on DFSDM SPI port 0 +and a pdm microphone connected on DFSDM SPI port 1: + + ads1202: simple_sd_adc@0 { + compatible = "ads1202"; + #io-channel-cells = <1>; + }; + + dfsdm: dfsdm@40017000 { + compatible = "st,stm32h7-dfsdm"; + reg = <0x40017000 0x400>; + clocks = <&rcc DFSDM1_CK>; + clock-names = "dfsdm"; + #address-cells = <1>; + #size-cells = <0>; + + dfsdm_adc0: dfsdm-adc@0 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <0>; + interrupts = <110>; + st,adc-channels = <0>; + st,adc-channel-names = "sd_adc0"; + st,adc-channel-types = "SPI_F"; + st,adc-channel-clk-src = "CLKOUT"; + io-channels = <&ads1202 0>; + st,filter-order = <3>; + }; + dfsdm_pdm1: dfsdm-pdm@1 { + compatible = "st,stm32-dfsdm-dmic"; + reg = <1>; + interrupts = <111>; + dmas = <&dmamux1 102 0x400 0x00>; + dma-names = "rx"; + st,adc-channels = <1>; + st,adc-channel-names = "dmic1"; + st,adc-channel-types = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + st,filter-order = <5>; + }; + }