diff mbox series

[v5,1/2] iio: adc: ti-ads7950: Fix improper use of mlock

Message ID 1552082608-42603-2-git-send-email-justinpopo6@gmail.com (mailing list archive)
State New, archived
Headers show
Series iio: adc: ads7950: add gpio support | expand

Commit Message

Justin Chen March 8, 2019, 10:03 p.m. UTC 
From: Justin Chen <justinpopo6@gmail.com>

Indio->mlock is used for protecting the different iio device modes.
It is currently not being used in this way. Replace the lock with
an internal lock specifically used for protecting the SPI transfer
buffer.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
---
 drivers/iio/adc/ti-ads7950.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

Comments

Tomasz Duszynski March 9, 2019, 4:29 p.m. UTC | #1 
On Fri, Mar 08, 2019 at 02:03:27PM -0800, justinpopo6@gmail.com wrote:
> From: Justin Chen <justinpopo6@gmail.com>
>
> Indio->mlock is used for protecting the different iio device modes.
> It is currently not being used in this way. Replace the lock with
> an internal lock specifically used for protecting the SPI transfer
> buffer.
>
> Signed-off-by: Justin Chen <justinpopo6@gmail.com>
> ---
>  drivers/iio/adc/ti-ads7950.c | 19 +++++++++++++++----
>  1 file changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
> index 0ad6359..1e47bef 100644
> --- a/drivers/iio/adc/ti-ads7950.c
> +++ b/drivers/iio/adc/ti-ads7950.c
> @@ -56,6 +56,9 @@ struct ti_ads7950_state {
>  	struct spi_message	ring_msg;
>  	struct spi_message	scan_single_msg;
>
> +	/* Lock to protect the spi xfer buffers */
> +	struct mutex		slock;
> +
>  	struct regulator	*reg;
>  	unsigned int		vref_mv;
>
> @@ -268,6 +271,7 @@ static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
>  	struct ti_ads7950_state *st = iio_priv(indio_dev);
>  	int ret;
>
> +	mutex_lock(&st->slock);
>  	ret = spi_sync(st->spi, &st->ring_msg);
>  	if (ret < 0)
>  		goto out;
> @@ -276,6 +280,7 @@ static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
>  					   iio_get_time_ns(indio_dev));
>
>  out:
> +	mutex_unlock(&st->slock);
>  	iio_trigger_notify_done(indio_dev->trig);
>
>  	return IRQ_HANDLED;
> @@ -286,7 +291,7 @@ static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
>  	struct ti_ads7950_state *st = iio_priv(indio_dev);
>  	int ret, cmd;
>
> -	mutex_lock(&indio_dev->mlock);
> +	mutex_lock(&st->slock);
>
>  	cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(ch) | st->settings;
>  	st->single_tx = cmd;
> @@ -298,7 +303,7 @@ static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
>  	ret = st->single_rx;
>
>  out:
> -	mutex_unlock(&indio_dev->mlock);
> +	mutex_unlock(&st->slock);
>
>  	return ret;
>  }
> @@ -432,16 +437,19 @@ static int ti_ads7950_probe(struct spi_device *spi)
>  	if (ACPI_COMPANION(&spi->dev))
>  		st->vref_mv = TI_ADS7950_VA_MV_ACPI_DEFAULT;
>
> +	mutex_init(&st->slock);
> +
>  	st->reg = devm_regulator_get(&spi->dev, "vref");
>  	if (IS_ERR(st->reg)) {
>  		dev_err(&spi->dev, "Failed get get regulator \"vref\"\n");
> -		return PTR_ERR(st->reg);
> +		ret = PTR_ERR(st->reg);
> +		goto error_destroy_mutex;
>  	}
>
>  	ret = regulator_enable(st->reg);
>  	if (ret) {
>  		dev_err(&spi->dev, "Failed to enable regulator \"vref\"\n");
> -		return ret;
> +		goto error_destroy_mutex;
>  	}
>
>  	ret = iio_triggered_buffer_setup(indio_dev, NULL,
> @@ -463,6 +471,8 @@ static int ti_ads7950_probe(struct spi_device *spi)
>  	iio_triggered_buffer_cleanup(indio_dev);
>  error_disable_reg:
>  	regulator_disable(st->reg);
> +error_destroy_mutex:
> +	mutex_destroy(&st->slock);

If your intention was to do resources cleanup then this is not
what this api was designed for. This is actually for debugging unwanted
subsequent mutex usage.

>
>  	return ret;
>  }
> @@ -475,6 +485,7 @@ static int ti_ads7950_remove(struct spi_device *spi)
>  	iio_device_unregister(indio_dev);
>  	iio_triggered_buffer_cleanup(indio_dev);
>  	regulator_disable(st->reg);
> +	mutex_destroy(&st->slock);
>
>  	return 0;
>  }
> --
> 2.7.4
>
Jonathan Cameron March 9, 2019, 6:37 p.m. UTC | #2 
On Sat, 9 Mar 2019 17:29:36 +0100
Tomasz Duszynski <tduszyns@gmail.com> wrote:

> On Fri, Mar 08, 2019 at 02:03:27PM -0800, justinpopo6@gmail.com wrote:
> > From: Justin Chen <justinpopo6@gmail.com>
> >
> > Indio->mlock is used for protecting the different iio device modes.
> > It is currently not being used in this way. Replace the lock with
> > an internal lock specifically used for protecting the SPI transfer
> > buffer.
> >
> > Signed-off-by: Justin Chen <justinpopo6@gmail.com>
> > ---
> >  drivers/iio/adc/ti-ads7950.c | 19 +++++++++++++++----
> >  1 file changed, 15 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
> > index 0ad6359..1e47bef 100644
> > --- a/drivers/iio/adc/ti-ads7950.c
> > +++ b/drivers/iio/adc/ti-ads7950.c
> > @@ -56,6 +56,9 @@ struct ti_ads7950_state {
> >  	struct spi_message	ring_msg;
> >  	struct spi_message	scan_single_msg;
> >
> > +	/* Lock to protect the spi xfer buffers */
> > +	struct mutex		slock;
> > +
> >  	struct regulator	*reg;
> >  	unsigned int		vref_mv;
> >
> > @@ -268,6 +271,7 @@ static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
> >  	struct ti_ads7950_state *st = iio_priv(indio_dev);
> >  	int ret;
> >
> > +	mutex_lock(&st->slock);
> >  	ret = spi_sync(st->spi, &st->ring_msg);
> >  	if (ret < 0)
> >  		goto out;
> > @@ -276,6 +280,7 @@ static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
> >  					   iio_get_time_ns(indio_dev));
> >
> >  out:
> > +	mutex_unlock(&st->slock);
> >  	iio_trigger_notify_done(indio_dev->trig);
> >
> >  	return IRQ_HANDLED;
> > @@ -286,7 +291,7 @@ static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
> >  	struct ti_ads7950_state *st = iio_priv(indio_dev);
> >  	int ret, cmd;
> >
> > -	mutex_lock(&indio_dev->mlock);
> > +	mutex_lock(&st->slock);
> >
> >  	cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(ch) | st->settings;
> >  	st->single_tx = cmd;
> > @@ -298,7 +303,7 @@ static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
> >  	ret = st->single_rx;
> >
> >  out:
> > -	mutex_unlock(&indio_dev->mlock);
> > +	mutex_unlock(&st->slock);
> >
> >  	return ret;
> >  }
> > @@ -432,16 +437,19 @@ static int ti_ads7950_probe(struct spi_device *spi)
> >  	if (ACPI_COMPANION(&spi->dev))
> >  		st->vref_mv = TI_ADS7950_VA_MV_ACPI_DEFAULT;
> >
> > +	mutex_init(&st->slock);
> > +
> >  	st->reg = devm_regulator_get(&spi->dev, "vref");
> >  	if (IS_ERR(st->reg)) {
> >  		dev_err(&spi->dev, "Failed get get regulator \"vref\"\n");
> > -		return PTR_ERR(st->reg);
> > +		ret = PTR_ERR(st->reg);
> > +		goto error_destroy_mutex;
> >  	}
> >
> >  	ret = regulator_enable(st->reg);
> >  	if (ret) {
> >  		dev_err(&spi->dev, "Failed to enable regulator \"vref\"\n");
> > -		return ret;
> > +		goto error_destroy_mutex;
> >  	}
> >
> >  	ret = iio_triggered_buffer_setup(indio_dev, NULL,
> > @@ -463,6 +471,8 @@ static int ti_ads7950_probe(struct spi_device *spi)
> >  	iio_triggered_buffer_cleanup(indio_dev);
> >  error_disable_reg:
> >  	regulator_disable(st->reg);
> > +error_destroy_mutex:
> > +	mutex_destroy(&st->slock);  
> 
> If your intention was to do resources cleanup then this is not
> what this api was designed for. This is actually for debugging unwanted
> subsequent mutex usage.

Yes. In a case like this where it is the last thing in a remove
it adds little value as there should be nothing left to take the mutex
anyway.  This is the reason (I guess) there has never been a 
devm_mutex_init function to tidy this up automatically...

> 
> >
> >  	return ret;
> >  }
> > @@ -475,6 +485,7 @@ static int ti_ads7950_remove(struct spi_device *spi)
> >  	iio_device_unregister(indio_dev);
> >  	iio_triggered_buffer_cleanup(indio_dev);
> >  	regulator_disable(st->reg);
> > +	mutex_destroy(&st->slock);
> >
> >  	return 0;
> >  }
> > --
> > 2.7.4
> >
Jonathan Cameron March 9, 2019, 6:40 p.m. UTC | #3 
On Sat, 9 Mar 2019 18:37:01 +0000
Jonathan Cameron <jic23@kernel.org> wrote:

> On Sat, 9 Mar 2019 17:29:36 +0100
> Tomasz Duszynski <tduszyns@gmail.com> wrote:
> 
> > On Fri, Mar 08, 2019 at 02:03:27PM -0800, justinpopo6@gmail.com wrote:  
> > > From: Justin Chen <justinpopo6@gmail.com>
> > >
> > > Indio->mlock is used for protecting the different iio device modes.
> > > It is currently not being used in this way. Replace the lock with
> > > an internal lock specifically used for protecting the SPI transfer
> > > buffer.
> > >
> > > Signed-off-by: Justin Chen <justinpopo6@gmail.com>
> > > ---
> > >  drivers/iio/adc/ti-ads7950.c | 19 +++++++++++++++----
> > >  1 file changed, 15 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
> > > index 0ad6359..1e47bef 100644
> > > --- a/drivers/iio/adc/ti-ads7950.c
> > > +++ b/drivers/iio/adc/ti-ads7950.c
> > > @@ -56,6 +56,9 @@ struct ti_ads7950_state {
> > >  	struct spi_message	ring_msg;
> > >  	struct spi_message	scan_single_msg;
> > >
> > > +	/* Lock to protect the spi xfer buffers */
> > > +	struct mutex		slock;
> > > +
> > >  	struct regulator	*reg;
> > >  	unsigned int		vref_mv;
> > >
> > > @@ -268,6 +271,7 @@ static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
> > >  	struct ti_ads7950_state *st = iio_priv(indio_dev);
> > >  	int ret;
> > >
> > > +	mutex_lock(&st->slock);
> > >  	ret = spi_sync(st->spi, &st->ring_msg);
> > >  	if (ret < 0)
> > >  		goto out;
> > > @@ -276,6 +280,7 @@ static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
> > >  					   iio_get_time_ns(indio_dev));
> > >
> > >  out:
> > > +	mutex_unlock(&st->slock);
> > >  	iio_trigger_notify_done(indio_dev->trig);
> > >
> > >  	return IRQ_HANDLED;
> > > @@ -286,7 +291,7 @@ static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
> > >  	struct ti_ads7950_state *st = iio_priv(indio_dev);
> > >  	int ret, cmd;
> > >
> > > -	mutex_lock(&indio_dev->mlock);
> > > +	mutex_lock(&st->slock);
> > >
> > >  	cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(ch) | st->settings;
> > >  	st->single_tx = cmd;
> > > @@ -298,7 +303,7 @@ static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
> > >  	ret = st->single_rx;
> > >
> > >  out:
> > > -	mutex_unlock(&indio_dev->mlock);
> > > +	mutex_unlock(&st->slock);
> > >
> > >  	return ret;
> > >  }
> > > @@ -432,16 +437,19 @@ static int ti_ads7950_probe(struct spi_device *spi)
> > >  	if (ACPI_COMPANION(&spi->dev))
> > >  		st->vref_mv = TI_ADS7950_VA_MV_ACPI_DEFAULT;
> > >
> > > +	mutex_init(&st->slock);
> > > +
> > >  	st->reg = devm_regulator_get(&spi->dev, "vref");
> > >  	if (IS_ERR(st->reg)) {
> > >  		dev_err(&spi->dev, "Failed get get regulator \"vref\"\n");
> > > -		return PTR_ERR(st->reg);
> > > +		ret = PTR_ERR(st->reg);
> > > +		goto error_destroy_mutex;
> > >  	}
> > >
> > >  	ret = regulator_enable(st->reg);
> > >  	if (ret) {
> > >  		dev_err(&spi->dev, "Failed to enable regulator \"vref\"\n");
> > > -		return ret;
> > > +		goto error_destroy_mutex;
> > >  	}
> > >
> > >  	ret = iio_triggered_buffer_setup(indio_dev, NULL,
> > > @@ -463,6 +471,8 @@ static int ti_ads7950_probe(struct spi_device *spi)
> > >  	iio_triggered_buffer_cleanup(indio_dev);
> > >  error_disable_reg:
> > >  	regulator_disable(st->reg);
> > > +error_destroy_mutex:
> > > +	mutex_destroy(&st->slock);    
> > 
> > If your intention was to do resources cleanup then this is not
> > what this api was designed for. This is actually for debugging unwanted
> > subsequent mutex usage.  
> 
> Yes. In a case like this where it is the last thing in a remove
> it adds little value as there should be nothing left to take the mutex
> anyway.  This is the reason (I guess) there has never been a 
> devm_mutex_init function to tidy this up automatically...
> 
Having said that, I just realised I applied this anyway last week.
I'm not fussed enough about this to revert the change, so right
now the mutex_destroys are there.

Jonathan

> >   
> > >
> > >  	return ret;
> > >  }
> > > @@ -475,6 +485,7 @@ static int ti_ads7950_remove(struct spi_device *spi)
> > >  	iio_device_unregister(indio_dev);
> > >  	iio_triggered_buffer_cleanup(indio_dev);
> > >  	regulator_disable(st->reg);
> > > +	mutex_destroy(&st->slock);
> > >
> > >  	return 0;
> > >  }
> > > --
> > > 2.7.4
> > >    
>
diff mbox series

Patch

diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
index 0ad6359..1e47bef 100644
--- a/drivers/iio/adc/ti-ads7950.c
+++ b/drivers/iio/adc/ti-ads7950.c
@@ -56,6 +56,9 @@  struct ti_ads7950_state {
 	struct spi_message	ring_msg;
 	struct spi_message	scan_single_msg;
 
+	/* Lock to protect the spi xfer buffers */
+	struct mutex		slock;
+
 	struct regulator	*reg;
 	unsigned int		vref_mv;
 
@@ -268,6 +271,7 @@  static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
 	struct ti_ads7950_state *st = iio_priv(indio_dev);
 	int ret;
 
+	mutex_lock(&st->slock);
 	ret = spi_sync(st->spi, &st->ring_msg);
 	if (ret < 0)
 		goto out;
@@ -276,6 +280,7 @@  static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
 					   iio_get_time_ns(indio_dev));
 
 out:
+	mutex_unlock(&st->slock);
 	iio_trigger_notify_done(indio_dev->trig);
 
 	return IRQ_HANDLED;
@@ -286,7 +291,7 @@  static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
 	struct ti_ads7950_state *st = iio_priv(indio_dev);
 	int ret, cmd;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->slock);
 
 	cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(ch) | st->settings;
 	st->single_tx = cmd;
@@ -298,7 +303,7 @@  static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
 	ret = st->single_rx;
 
 out:
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->slock);
 
 	return ret;
 }
@@ -432,16 +437,19 @@  static int ti_ads7950_probe(struct spi_device *spi)
 	if (ACPI_COMPANION(&spi->dev))
 		st->vref_mv = TI_ADS7950_VA_MV_ACPI_DEFAULT;
 
+	mutex_init(&st->slock);
+
 	st->reg = devm_regulator_get(&spi->dev, "vref");
 	if (IS_ERR(st->reg)) {
 		dev_err(&spi->dev, "Failed get get regulator \"vref\"\n");
-		return PTR_ERR(st->reg);
+		ret = PTR_ERR(st->reg);
+		goto error_destroy_mutex;
 	}
 
 	ret = regulator_enable(st->reg);
 	if (ret) {
 		dev_err(&spi->dev, "Failed to enable regulator \"vref\"\n");
-		return ret;
+		goto error_destroy_mutex;
 	}
 
 	ret = iio_triggered_buffer_setup(indio_dev, NULL,
@@ -463,6 +471,8 @@  static int ti_ads7950_probe(struct spi_device *spi)
 	iio_triggered_buffer_cleanup(indio_dev);
 error_disable_reg:
 	regulator_disable(st->reg);
+error_destroy_mutex:
+	mutex_destroy(&st->slock);
 
 	return ret;
 }
@@ -475,6 +485,7 @@  static int ti_ads7950_remove(struct spi_device *spi)
 	iio_device_unregister(indio_dev);
 	iio_triggered_buffer_cleanup(indio_dev);
 	regulator_disable(st->reg);
+	mutex_destroy(&st->slock);
 
 	return 0;
 }