| Message ID | 1572881940-15420-1-git-send-email-gupt21@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v6,1/3] iio: light: add driver for veml6030 ambient light sensor | expand |
On Mon, 4 Nov 2019 21:09:00 +0530 Rishi Gupta <gupt21@gmail.com> wrote: > This commit adds device tree bindings for veml6030 ambient > light sensor. > > Signed-off-by: Rishi Gupta <gupt21@gmail.com> > Reviewed-by: Rob Herring <robh@kernel.org> Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to possibly poke at it. Not sure they actually do dt binding checks though and they pass locally so that's probably irrelevant for now ;) Thanks, Jonathan > --- > Changes in v6: > * None > > Changes in v5: > * None > > Changes in v4: > * Added enum in reg property > * Removed maxItems from reg property > > Changes in v3: > * None > > Changes in v2: > * Corrected grammatical mistake from 'is' to 'are' in description of bindings > > .../devicetree/bindings/iio/light/veml6030.yaml | 62 ++++++++++++++++++++++ > 1 file changed, 62 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/veml6030.yaml > > diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml > new file mode 100644 > index 0000000..0ff9b11 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml > @@ -0,0 +1,62 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/light/veml6030.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: VEML6030 Ambient Light Sensor (ALS) > + > +maintainers: > + - Rishi Gupta <gupt21@gmail.com> > + > +description: | > + Bindings for the ambient light sensor veml6030 from Vishay > + Semiconductors over an i2c interface. > + > + Irrespective of whether interrupt is used or not, application > + can get the ALS and White channel reading from IIO raw interface. > + > + If the interrupts are used, application will receive an IIO event > + whenever configured threshold is crossed. > + > + Specifications about the sensor can be found at: > + https://www.vishay.com/docs/84366/veml6030.pdf > + > +properties: > + compatible: > + enum: > + - vishay,veml6030 > + > + reg: > + description: > + I2C address of the device. > + enum: > + - 0x10 # ADDR pin pulled down > + - 0x48 # ADDR pin pulled up > + > + interrupts: > + description: > + interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW. > + Refer to interrupt-controller/interrupts.txt for generic > + interrupt client node bindings. > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + light-sensor@10 { > + compatible = "vishay,veml6030"; > + reg = <0x10>; > + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; > + }; > + }; > +...
diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml new file mode 100644 index 0000000..0ff9b11 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/veml6030.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VEML6030 Ambient Light Sensor (ALS) + +maintainers: + - Rishi Gupta <gupt21@gmail.com> + +description: | + Bindings for the ambient light sensor veml6030 from Vishay + Semiconductors over an i2c interface. + + Irrespective of whether interrupt is used or not, application + can get the ALS and White channel reading from IIO raw interface. + + If the interrupts are used, application will receive an IIO event + whenever configured threshold is crossed. + + Specifications about the sensor can be found at: + https://www.vishay.com/docs/84366/veml6030.pdf + +properties: + compatible: + enum: + - vishay,veml6030 + + reg: + description: + I2C address of the device. + enum: + - 0x10 # ADDR pin pulled down + - 0x48 # ADDR pin pulled up + + interrupts: + description: + interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW. + Refer to interrupt-controller/interrupts.txt for generic + interrupt client node bindings. + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@10 { + compatible = "vishay,veml6030"; + reg = <0x10>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + }; + }; +...