| Message ID | 1586942266-21480-3-git-send-email-jprakash@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [V2,1/3] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format | expand |
On Wed, 15 Apr 2020 14:47:45 +0530 Jishnu Prakash <jprakash@codeaurora.org> wrote: > Add documentation for PMIC7 ADC peripheral. > For the PMIC7-type PMICs, ADC peripheral is present in HW for the > following PMICs: PMK8350, PM8350, PM8350b, PMR735a and PMR735b. > Of these, only the ADC peripheral on PMK8350 is exposed directly to SW. > If SW needs to communicate with ADCs on other PMICs, it specifies the > PMIC to PMK8350 through the newly added SID register and communication > between PMK8350 ADC and other PMIC ADCs is carried out through > PBS(Programmable Boot Sequence) at the firmware level. > > In addition, add definitions for ADC channels and virtual channel > definitions (combination of ADC channel number and PMIC SID number) > per PMIC, to be used by ADC clients for PMIC7. > > Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org> > --- > .../bindings/iio/adc/qcom,spmi-vadc.yaml | 52 +++++++++++-- > include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h | 67 ++++++++++++++++ > include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h | 88 ++++++++++++++++++++++ > include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h | 46 +++++++++++ > include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h | 28 +++++++ > include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h | 28 +++++++ > include/dt-bindings/iio/qcom,spmi-vadc.h | 78 ++++++++++++++++++- > 7 files changed, 380 insertions(+), 7 deletions(-) > create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h > create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h > create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h > create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h > create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h > > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > index 8273981..62aa311 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > @@ -13,7 +13,7 @@ maintainers: > description: | > SPMI PMIC voltage ADC (VADC) provides interface to clients to read > voltage. The VADC is a 15-bit sigma-delta ADC. > - SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read > + SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read > voltage. The VADC is a 16-bit sigma-delta ADC. > > properties: > @@ -28,6 +28,7 @@ properties: > - qcom,spmi-vadc > - qcom,spmi-adc5 > - qcom,spmi-adc-rev2 > + - qcom,spmi-adc7 > > reg: > description: VADC base address in the SPMI PMIC register map > @@ -70,6 +71,8 @@ patternProperties: > description: | > ADC channel number. > See include/dt-bindings/iio/qcom,spmi-vadc.h > + For PMIC7 ADC, the channel numbers are specified separately per PMIC > + in the PMIC-specific files in include/dt-bindings/iio/. > > label: > $ref: /schemas/types.yaml#/definitions/string > @@ -89,6 +92,8 @@ patternProperties: > of 512 will be used. > - For compatible property "qcom,spmi-adc5", valid values are 250, 420 > and 840. If property is not found, default value of 840 is used. > + - For compatible property "qcom,spmi-adc7", valid values are 85, 340 > + and 1360. If property is not found, default value of 1360 is used. > - For compatible property "qcom,spmi-adc-rev2", valid values are 256, > 512 and 1024. If property is not present, default value is 1024. > > @@ -122,11 +127,11 @@ patternProperties: > channel calibration. If property is not found, channel will be > calibrated with 0.625V and 1.25V reference channels, also > known as absolute calibration. > - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", > - if this property is specified VADC will use the VDD reference (1.875V) > - and GND for channel calibration. If property is not found, channel > - will be calibrated with 0V and 1.25V reference channels, also known > - as absolute calibration. > + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and > + "qcom,spmi-adc-rev2", if this property is specified VADC will use > + the VDD reference (1.875V) and GND for channel calibration. If > + property is not found, channel will be calibrated with 0V and 1.25V > + reference channels, also known as absolute calibration. > type: boolean > > qcom,hw-settle-time: > @@ -149,6 +154,12 @@ patternProperties: > Certain controller digital versions have valid values of > 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms > If property is not found, channel will use 15us. > + - For compatible property "qcom,spmi-adc7", delay = 15us for > + value 0, 100us * (value) for values < 8, 1ms for value 8 > + and 2ms * (value - 8) otherwise. > + Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, > + 4000, 8000, 16000, 32000, 64000, 128000 us. We are enforcing them in the binding. Does it make sense to put them here as well? Just seems like something that will get out of sync to me. > + If property is not found, channel will use 15us. > > qcom,avg-samples: > $ref: /schemas/types.yaml#/definitions/uint32 > @@ -160,6 +171,9 @@ patternProperties: > - For compatible property "qcom,spmi-vadc", valid values > are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 > If property is not found, 1 sample will be used. > + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" > + and "qcom,spmi-adc-rev2", valid values are: 1, 2, 4, 8, 16. > + If property is not found, 1 sample will be used. > > required: > - reg > @@ -244,6 +258,32 @@ allOf: > enum: [ 1, 2, 4, 8, 16 ] > default: 1 > > + - if: > + properties: > + compatible: > + contains: > + const: qcom,spmi-adc7 > + > + then: > + patternProperties: > + "^.*@[0-9a-fx]+$": > + properties: > + qcom,decimation: > + items: > + enum: [ 85, 340, 1360 ] > + default: 1360 > + > + qcom,hw-settle-time: > + items: > + enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, > + 8000, 16000, 32000, 64000, 128000 ] > + default: 15 > + > + qcom,avg-samples: > + items: > + enum: [ 1, 2, 4, 8, 16 ] > + default: 1 > + > examples: > - | > spmi_bus { > diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h > new file mode 100644 > index 0000000..9426f27 > --- /dev/null > +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h > @@ -0,0 +1,67 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2020, The Linux Foundation. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H > +#define _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H > + > +#ifndef PM8350_SID > +#define PM8350_SID 1 > +#endif > + > +/* ADC channels for PM8350_ADC for PMIC7 */ > +#define PM8350_ADC7_REF_GND (PM8350_SID << 8 | 0x0) > +#define PM8350_ADC7_1P25VREF (PM8350_SID << 8 | 0x01) > +#define PM8350_ADC7_VREF_VADC (PM8350_SID << 8 | 0x02) > +#define PM8350_ADC7_DIE_TEMP (PM8350_SID << 8 | 0x03) > + > +#define PM8350_ADC7_AMUX_THM1 (PM8350_SID << 8 | 0x04) > +#define PM8350_ADC7_AMUX_THM2 (PM8350_SID << 8 | 0x05) > +#define PM8350_ADC7_AMUX_THM3 (PM8350_SID << 8 | 0x06) > +#define PM8350_ADC7_AMUX_THM4 (PM8350_SID << 8 | 0x07) > +#define PM8350_ADC7_AMUX_THM5 (PM8350_SID << 8 | 0x08) > +#define PM8350_ADC7_GPIO1 (PM8350_SID << 8 | 0x0a) > +#define PM8350_ADC7_GPIO2 (PM8350_SID << 8 | 0x0b) > +#define PM8350_ADC7_GPIO3 (PM8350_SID << 8 | 0x0c) > +#define PM8350_ADC7_GPIO4 (PM8350_SID << 8 | 0x0d) > + > +/* 30k pull-up1 */ > +#define PM8350_ADC7_AMUX_THM1_30K_PU (PM8350_SID << 8 | 0x24) > +#define PM8350_ADC7_AMUX_THM2_30K_PU (PM8350_SID << 8 | 0x25) > +#define PM8350_ADC7_AMUX_THM3_30K_PU (PM8350_SID << 8 | 0x26) > +#define PM8350_ADC7_AMUX_THM4_30K_PU (PM8350_SID << 8 | 0x27) > +#define PM8350_ADC7_AMUX_THM5_30K_PU (PM8350_SID << 8 | 0x28) > +#define PM8350_ADC7_GPIO1_30K_PU (PM8350_SID << 8 | 0x2a) > +#define PM8350_ADC7_GPIO2_30K_PU (PM8350_SID << 8 | 0x2b) > +#define PM8350_ADC7_GPIO3_30K_PU (PM8350_SID << 8 | 0x2c) > +#define PM8350_ADC7_GPIO4_30K_PU (PM8350_SID << 8 | 0x2d) > + > +/* 100k pull-up2 */ > +#define PM8350_ADC7_AMUX_THM1_100K_PU (PM8350_SID << 8 | 0x44) > +#define PM8350_ADC7_AMUX_THM2_100K_PU (PM8350_SID << 8 | 0x45) > +#define PM8350_ADC7_AMUX_THM3_100K_PU (PM8350_SID << 8 | 0x46) > +#define PM8350_ADC7_AMUX_THM4_100K_PU (PM8350_SID << 8 | 0x47) > +#define PM8350_ADC7_AMUX_THM5_100K_PU (PM8350_SID << 8 | 0x48) > +#define PM8350_ADC7_GPIO1_100K_PU (PM8350_SID << 8 | 0x4a) > +#define PM8350_ADC7_GPIO2_100K_PU (PM8350_SID << 8 | 0x4b) > +#define PM8350_ADC7_GPIO3_100K_PU (PM8350_SID << 8 | 0x4c) > +#define PM8350_ADC7_GPIO4_100K_PU (PM8350_SID << 8 | 0x4d) > + > +/* 400k pull-up3 */ > +#define PM8350_ADC7_AMUX_THM1_400K_PU (PM8350_SID << 8 | 0x64) > +#define PM8350_ADC7_AMUX_THM2_400K_PU (PM8350_SID << 8 | 0x65) > +#define PM8350_ADC7_AMUX_THM3_400K_PU (PM8350_SID << 8 | 0x66) > +#define PM8350_ADC7_AMUX_THM4_400K_PU (PM8350_SID << 8 | 0x67) > +#define PM8350_ADC7_AMUX_THM5_400K_PU (PM8350_SID << 8 | 0x68) > +#define PM8350_ADC7_GPIO1_400K_PU (PM8350_SID << 8 | 0x6a) > +#define PM8350_ADC7_GPIO2_400K_PU (PM8350_SID << 8 | 0x6b) > +#define PM8350_ADC7_GPIO3_400K_PU (PM8350_SID << 8 | 0x6c) > +#define PM8350_ADC7_GPIO4_400K_PU (PM8350_SID << 8 | 0x6d) > + > +/* 1/3 Divider */ > +#define PM8350_ADC7_GPIO4_DIV3 (PM8350_SID << 8 | 0x8d) > + > +#define PM8350_ADC7_VPH_PWR (PM8350_SID << 8 | 0x8e) > + > +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H */ > diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h > new file mode 100644 > index 0000000..dc2497c > --- /dev/null > +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h > @@ -0,0 +1,88 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2020 The Linux Foundation. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM8350B_H > +#define _DT_BINDINGS_QCOM_SPMI_VADC_PM8350B_H > + > +#ifndef PM8350B_SID > +#define PM8350B_SID 3 > +#endif > + > +/* ADC channels for PM8350B_ADC for PMIC7 */ > +#define PM8350B_ADC7_REF_GND (PM8350B_SID << 8 | 0x0) > +#define PM8350B_ADC7_1P25VREF (PM8350B_SID << 8 | 0x01) > +#define PM8350B_ADC7_VREF_VADC (PM8350B_SID << 8 | 0x02) > +#define PM8350B_ADC7_DIE_TEMP (PM8350B_SID << 8 | 0x03) > + > +#define PM8350B_ADC7_AMUX_THM1 (PM8350B_SID << 8 | 0x04) > +#define PM8350B_ADC7_AMUX_THM2 (PM8350B_SID << 8 | 0x05) > +#define PM8350B_ADC7_AMUX_THM3 (PM8350B_SID << 8 | 0x06) > +#define PM8350B_ADC7_AMUX_THM4 (PM8350B_SID << 8 | 0x07) > +#define PM8350B_ADC7_AMUX_THM5 (PM8350B_SID << 8 | 0x08) > +#define PM8350B_ADC7_AMUX_THM6 (PM8350B_SID << 8 | 0x09) > +#define PM8350B_ADC7_GPIO1 (PM8350B_SID << 8 | 0x0a) > +#define PM8350B_ADC7_GPIO2 (PM8350B_SID << 8 | 0x0b) > +#define PM8350B_ADC7_GPIO3 (PM8350B_SID << 8 | 0x0c) > +#define PM8350B_ADC7_GPIO4 (PM8350B_SID << 8 | 0x0d) > + > +#define PM8350B_ADC7_CHG_TEMP (PM8350B_SID << 8 | 0x10) > +#define PM8350B_ADC7_USB_IN_V_16 (PM8350B_SID << 8 | 0x11) > +#define PM8350B_ADC7_VDC_16 (PM8350B_SID << 8 | 0x12) > +#define PM8350B_ADC7_CC1_ID (PM8350B_SID << 8 | 0x13) > +#define PM8350B_ADC7_VREF_BAT_THERM (PM8350B_SID << 8 | 0x15) > +#define PM8350B_ADC7_IIN_FB (PM8350B_SID << 8 | 0x17) > + > +/* 30k pull-up1 */ > +#define PM8350B_ADC7_AMUX_THM1_30K_PU (PM8350B_SID << 8 | 0x24) > +#define PM8350B_ADC7_AMUX_THM2_30K_PU (PM8350B_SID << 8 | 0x25) > +#define PM8350B_ADC7_AMUX_THM3_30K_PU (PM8350B_SID << 8 | 0x26) > +#define PM8350B_ADC7_AMUX_THM4_30K_PU (PM8350B_SID << 8 | 0x27) > +#define PM8350B_ADC7_AMUX_THM5_30K_PU (PM8350B_SID << 8 | 0x28) > +#define PM8350B_ADC7_AMUX_THM6_30K_PU (PM8350B_SID << 8 | 0x29) > +#define PM8350B_ADC7_GPIO1_30K_PU (PM8350B_SID << 8 | 0x2a) > +#define PM8350B_ADC7_GPIO2_30K_PU (PM8350B_SID << 8 | 0x2b) > +#define PM8350B_ADC7_GPIO3_30K_PU (PM8350B_SID << 8 | 0x2c) > +#define PM8350B_ADC7_GPIO4_30K_PU (PM8350B_SID << 8 | 0x2d) > +#define PM8350B_ADC7_CC1_ID_30K_PU (PM8350B_SID << 8 | 0x33) > + > +/* 100k pull-up2 */ > +#define PM8350B_ADC7_AMUX_THM1_100K_PU (PM8350B_SID << 8 | 0x44) > +#define PM8350B_ADC7_AMUX_THM2_100K_PU (PM8350B_SID << 8 | 0x45) > +#define PM8350B_ADC7_AMUX_THM3_100K_PU (PM8350B_SID << 8 | 0x46) > +#define PM8350B_ADC7_AMUX_THM4_100K_PU (PM8350B_SID << 8 | 0x47) > +#define PM8350B_ADC7_AMUX_THM5_100K_PU (PM8350B_SID << 8 | 0x48) > +#define PM8350B_ADC7_AMUX_THM6_100K_PU (PM8350B_SID << 8 | 0x49) > +#define PM8350B_ADC7_GPIO1_100K_PU (PM8350B_SID << 8 | 0x4a) > +#define PM8350B_ADC7_GPIO2_100K_PU (PM8350B_SID << 8 | 0x4b) > +#define PM8350B_ADC7_GPIO3_100K_PU (PM8350B_SID << 8 | 0x4c) > +#define PM8350B_ADC7_GPIO4_100K_PU (PM8350B_SID << 8 | 0x4d) > +#define PM8350B_ADC7_CC1_ID_100K_PU (PM8350B_SID << 8 | 0x53) > + > +/* 400k pull-up3 */ > +#define PM8350B_ADC7_AMUX_THM1_400K_PU (PM8350B_SID << 8 | 0x64) > +#define PM8350B_ADC7_AMUX_THM2_400K_PU (PM8350B_SID << 8 | 0x65) > +#define PM8350B_ADC7_AMUX_THM3_400K_PU (PM8350B_SID << 8 | 0x66) > +#define PM8350B_ADC7_AMUX_THM4_400K_PU (PM8350B_SID << 8 | 0x67) > +#define PM8350B_ADC7_AMUX_THM5_400K_PU (PM8350B_SID << 8 | 0x68) > +#define PM8350B_ADC7_AMUX_THM6_400K_PU (PM8350B_SID << 8 | 0x69) > +#define PM8350B_ADC7_GPIO1_400K_PU (PM8350B_SID << 8 | 0x6a) > +#define PM8350B_ADC7_GPIO2_400K_PU (PM8350B_SID << 8 | 0x6b) > +#define PM8350B_ADC7_GPIO3_400K_PU (PM8350B_SID << 8 | 0x6c) > +#define PM8350B_ADC7_GPIO4_400K_PU (PM8350B_SID << 8 | 0x6d) > +#define PM8350B_ADC7_CC1_ID_400K_PU (PM8350B_SID << 8 | 0x73) > + > +/* 1/3 Divider */ > +#define PM8350B_ADC7_GPIO1_DIV3 (PM8350B_SID << 8 | 0x8a) > +#define PM8350B_ADC7_GPIO2_DIV3 (PM8350B_SID << 8 | 0x8b) > +#define PM8350B_ADC7_GPIO3_DIV3 (PM8350B_SID << 8 | 0x8c) > +#define PM8350B_ADC7_GPIO4_DIV3 (PM8350B_SID << 8 | 0x8d) > + > +#define PM8350B_ADC7_VPH_PWR (PM8350B_SID << 8 | 0x8e) > +#define PM8350B_ADC7_VBAT_SNS (PM8350B_SID << 8 | 0x8f) > + > +#define PM8350B_ADC7_SBUx (PM8350B_SID << 8 | 0x94) > +#define PM8350B_ADC7_VBAT_2S_MID (PM8350B_SID << 8 | 0x96) > + > +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PM8350B_H */ > diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h b/include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h > new file mode 100644 > index 0000000..6c29687 > --- /dev/null > +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h > @@ -0,0 +1,46 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2020 The Linux Foundation. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PMK8350_H > +#define _DT_BINDINGS_QCOM_SPMI_VADC_PMK8350_H > + > +#ifndef PMK8350_SID > +#define PMK8350_SID 0 > +#endif > + > +/* ADC channels for PMK8350_ADC for PMIC7 */ > +#define PMK8350_ADC7_REF_GND (PMK8350_SID << 8 | 0x0) > +#define PMK8350_ADC7_1P25VREF (PMK8350_SID << 8 | 0x01) > +#define PMK8350_ADC7_VREF_VADC (PMK8350_SID << 8 | 0x02) > +#define PMK8350_ADC7_DIE_TEMP (PMK8350_SID << 8 | 0x03) > + > +#define PMK8350_ADC7_AMUX_THM1 (PMK8350_SID << 8 | 0x04) > +#define PMK8350_ADC7_AMUX_THM2 (PMK8350_SID << 8 | 0x05) > +#define PMK8350_ADC7_AMUX_THM3 (PMK8350_SID << 8 | 0x06) > +#define PMK8350_ADC7_AMUX_THM4 (PMK8350_SID << 8 | 0x07) > +#define PMK8350_ADC7_AMUX_THM5 (PMK8350_SID << 8 | 0x08) > + > +/* 30k pull-up1 */ > +#define PMK8350_ADC7_AMUX_THM1_30K_PU (PMK8350_SID << 8 | 0x24) > +#define PMK8350_ADC7_AMUX_THM2_30K_PU (PMK8350_SID << 8 | 0x25) > +#define PMK8350_ADC7_AMUX_THM3_30K_PU (PMK8350_SID << 8 | 0x26) > +#define PMK8350_ADC7_AMUX_THM4_30K_PU (PMK8350_SID << 8 | 0x27) > +#define PMK8350_ADC7_AMUX_THM5_30K_PU (PMK8350_SID << 8 | 0x28) > + > +/* 100k pull-up2 */ > +#define PMK8350_ADC7_AMUX_THM1_100K_PU (PMK8350_SID << 8 | 0x44) > +#define PMK8350_ADC7_AMUX_THM2_100K_PU (PMK8350_SID << 8 | 0x45) > +#define PMK8350_ADC7_AMUX_THM3_100K_PU (PMK8350_SID << 8 | 0x46) > +#define PMK8350_ADC7_AMUX_THM4_100K_PU (PMK8350_SID << 8 | 0x47) > +#define PMK8350_ADC7_AMUX_THM5_100K_PU (PMK8350_SID << 8 | 0x48) > + > +/* 400k pull-up3 */ > +#define PMK8350_ADC7_AMUX_THM1_400K_PU (PMK8350_SID << 8 | 0x64) > +#define PMK8350_ADC7_AMUX_THM2_400K_PU (PMK8350_SID << 8 | 0x65) > +#define PMK8350_ADC7_AMUX_THM3_400K_PU (PMK8350_SID << 8 | 0x66) > +#define PMK8350_ADC7_AMUX_THM4_400K_PU (PMK8350_SID << 8 | 0x67) > +#define PMK8350_ADC7_AMUX_THM5_400K_PU (PMK8350_SID << 8 | 0x68) > + > +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PMK8350_H */ > diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h > new file mode 100644 > index 0000000..d6df1b1 > --- /dev/null > +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h > @@ -0,0 +1,28 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2020 The Linux Foundation. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PMR735A_H > +#define _DT_BINDINGS_QCOM_SPMI_VADC_PMR735A_H > + > +#ifndef PMR735A_SID > +#define PMR735A_SID 4 > +#endif > + > +/* ADC channels for PMR735A_ADC for PMIC7 */ > +#define PMR735A_ADC7_REF_GND (PMR735A_SID << 8 | 0x0) > +#define PMR735A_ADC7_1P25VREF (PMR735A_SID << 8 | 0x01) > +#define PMR735A_ADC7_VREF_VADC (PMR735A_SID << 8 | 0x02) > +#define PMR735A_ADC7_DIE_TEMP (PMR735A_SID << 8 | 0x03) > + > +#define PMR735A_ADC7_GPIO1 (PMR735A_SID << 8 | 0x0a) > +#define PMR735A_ADC7_GPIO2 (PMR735A_SID << 8 | 0x0b) > +#define PMR735A_ADC7_GPIO3 (PMR735A_SID << 8 | 0x0c) > + > +/* 100k pull-up2 */ > +#define PMR735A_ADC7_GPIO1_100K_PU (PMR735A_SID << 8 | 0x4a) > +#define PMR735A_ADC7_GPIO2_100K_PU (PMR735A_SID << 8 | 0x4b) > +#define PMR735A_ADC7_GPIO3_100K_PU (PMR735A_SID << 8 | 0x4c) > + > +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PMR735A_H */ > diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h > new file mode 100644 > index 0000000..8da0e7d > --- /dev/null > +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h > @@ -0,0 +1,28 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2020 The Linux Foundation. All rights reserved. > + */ > + > +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PMR735B_H > +#define _DT_BINDINGS_QCOM_SPMI_VADC_PMR735B_H > + > +#ifndef PMR735B_SID > +#define PMR735B_SID 5 > +#endif > + > +/* ADC channels for PMR735B_ADC for PMIC7 */ > +#define PMR735B_ADC7_REF_GND (PMR735B_SID << 8 | 0x0) > +#define PMR735B_ADC7_1P25VREF (PMR735B_SID << 8 | 0x01) > +#define PMR735B_ADC7_VREF_VADC (PMR735B_SID << 8 | 0x02) > +#define PMR735B_ADC7_DIE_TEMP (PMR735B_SID << 8 | 0x03) > + > +#define PMR735B_ADC7_GPIO1 (PMR735B_SID << 8 | 0x0a) > +#define PMR735B_ADC7_GPIO2 (PMR735B_SID << 8 | 0x0b) > +#define PMR735B_ADC7_GPIO3 (PMR735B_SID << 8 | 0x0c) > + > +/* 100k pull-up2 */ > +#define PMR735B_ADC7_GPIO1_100K_PU (PMR735B_SID << 8 | 0x4a) > +#define PMR735B_ADC7_GPIO2_100K_PU (PMR735B_SID << 8 | 0x4b) > +#define PMR735B_ADC7_GPIO3_100K_PU (PMR735B_SID << 8 | 0x4c) > + > +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PMR735B_H */ > diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h > index 61d556d..08adfe2 100644 > --- a/include/dt-bindings/iio/qcom,spmi-vadc.h > +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h > @@ -1,6 +1,6 @@ > /* SPDX-License-Identifier: GPL-2.0 */ > /* > - * Copyright (c) 2012-2014,2018 The Linux Foundation. All rights reserved. > + * Copyright (c) 2012-2014,2018,2020 The Linux Foundation. All rights reserved. > */ > > #ifndef _DT_BINDINGS_QCOM_SPMI_VADC_H > @@ -221,4 +221,80 @@ > > #define ADC5_MAX_CHANNEL 0xc0 > > +/* ADC channels for ADC for PMIC7 */ > + > +#define ADC7_REF_GND 0x00 > +#define ADC7_1P25VREF 0x01 > +#define ADC7_VREF_VADC 0x02 > +#define ADC7_DIE_TEMP 0x03 > + > +#define ADC7_AMUX_THM1 0x04 > +#define ADC7_AMUX_THM2 0x05 > +#define ADC7_AMUX_THM3 0x06 > +#define ADC7_AMUX_THM4 0x07 > +#define ADC7_AMUX_THM5 0x08 > +#define ADC7_AMUX_THM6 0x09 > +#define ADC7_GPIO1 0x0a > +#define ADC7_GPIO2 0x0b > +#define ADC7_GPIO3 0x0c > +#define ADC7_GPIO4 0x0d > + > +#define ADC7_CHG_TEMP 0x10 > +#define ADC7_USB_IN_V_16 0x11 > +#define ADC7_VDC_16 0x12 > +#define ADC7_CC1_ID 0x13 > +#define ADC7_VREF_BAT_THERM 0x15 > +#define ADC7_IIN_FB 0x17 > + > +/* 30k pull-up1 */ > +#define ADC7_AMUX_THM1_30K_PU 0x24 > +#define ADC7_AMUX_THM2_30K_PU 0x25 > +#define ADC7_AMUX_THM3_30K_PU 0x26 > +#define ADC7_AMUX_THM4_30K_PU 0x27 > +#define ADC7_AMUX_THM5_30K_PU 0x28 > +#define ADC7_AMUX_THM6_30K_PU 0x29 > +#define ADC7_GPIO1_30K_PU 0x2a > +#define ADC7_GPIO2_30K_PU 0x2b > +#define ADC7_GPIO3_30K_PU 0x2c > +#define ADC7_GPIO4_30K_PU 0x2d > +#define ADC7_CC1_ID_30K_PU 0x33 > + > +/* 100k pull-up2 */ > +#define ADC7_AMUX_THM1_100K_PU 0x44 > +#define ADC7_AMUX_THM2_100K_PU 0x45 > +#define ADC7_AMUX_THM3_100K_PU 0x46 > +#define ADC7_AMUX_THM4_100K_PU 0x47 > +#define ADC7_AMUX_THM5_100K_PU 0x48 > +#define ADC7_AMUX_THM6_100K_PU 0x49 > +#define ADC7_GPIO1_100K_PU 0x4a > +#define ADC7_GPIO2_100K_PU 0x4b > +#define ADC7_GPIO3_100K_PU 0x4c > +#define ADC7_GPIO4_100K_PU 0x4d > +#define ADC7_CC1_ID_100K_PU 0x53 > + > +/* 400k pull-up3 */ > +#define ADC7_AMUX_THM1_400K_PU 0x64 > +#define ADC7_AMUX_THM2_400K_PU 0x65 > +#define ADC7_AMUX_THM3_400K_PU 0x66 > +#define ADC7_AMUX_THM4_400K_PU 0x67 > +#define ADC7_AMUX_THM5_400K_PU 0x68 > +#define ADC7_AMUX_THM6_400K_PU 0x69 > +#define ADC7_GPIO1_400K_PU 0x6a > +#define ADC7_GPIO2_400K_PU 0x6b > +#define ADC7_GPIO3_400K_PU 0x6c > +#define ADC7_GPIO4_400K_PU 0x6d > +#define ADC7_CC1_ID_400K_PU 0x73 > + > +/* 1/3 Divider */ > +#define ADC7_GPIO1_DIV3 0x8a > +#define ADC7_GPIO2_DIV3 0x8b > +#define ADC7_GPIO3_DIV3 0x8c > +#define ADC7_GPIO4_DIV3 0x8d > + > +#define ADC7_VPH_PWR 0x8e > +#define ADC7_VBAT_SNS 0x8f > + > +#define ADC7_SBUx 0x94 > +#define ADC7_VBAT_2S_MID 0x96 > + > #endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */
On Wed, Apr 15, 2020 at 02:47:45PM +0530, Jishnu Prakash wrote: > Add documentation for PMIC7 ADC peripheral. > For the PMIC7-type PMICs, ADC peripheral is present in HW for the > following PMICs: PMK8350, PM8350, PM8350b, PMR735a and PMR735b. > Of these, only the ADC peripheral on PMK8350 is exposed directly to SW. > If SW needs to communicate with ADCs on other PMICs, it specifies the > PMIC to PMK8350 through the newly added SID register and communication > between PMK8350 ADC and other PMIC ADCs is carried out through > PBS(Programmable Boot Sequence) at the firmware level. > > In addition, add definitions for ADC channels and virtual channel > definitions (combination of ADC channel number and PMIC SID number) > per PMIC, to be used by ADC clients for PMIC7. > > Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org> > --- > .../bindings/iio/adc/qcom,spmi-vadc.yaml | 52 +++++++++++-- > include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h | 67 ++++++++++++++++ > include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h | 88 ++++++++++++++++++++++ > include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h | 46 +++++++++++ > include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h | 28 +++++++ > include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h | 28 +++++++ > include/dt-bindings/iio/qcom,spmi-vadc.h | 78 ++++++++++++++++++- > 7 files changed, 380 insertions(+), 7 deletions(-) > create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h > create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h > create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h > create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h > create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h > > diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > index 8273981..62aa311 100644 > --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml > @@ -13,7 +13,7 @@ maintainers: > description: | > SPMI PMIC voltage ADC (VADC) provides interface to clients to read > voltage. The VADC is a 15-bit sigma-delta ADC. > - SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read > + SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read > voltage. The VADC is a 16-bit sigma-delta ADC. > > properties: > @@ -28,6 +28,7 @@ properties: > - qcom,spmi-vadc > - qcom,spmi-adc5 > - qcom,spmi-adc-rev2 > + - qcom,spmi-adc7 > > reg: > description: VADC base address in the SPMI PMIC register map > @@ -70,6 +71,8 @@ patternProperties: > description: | > ADC channel number. > See include/dt-bindings/iio/qcom,spmi-vadc.h > + For PMIC7 ADC, the channel numbers are specified separately per PMIC > + in the PMIC-specific files in include/dt-bindings/iio/. > > label: > $ref: /schemas/types.yaml#/definitions/string > @@ -89,6 +92,8 @@ patternProperties: > of 512 will be used. > - For compatible property "qcom,spmi-adc5", valid values are 250, 420 > and 840. If property is not found, default value of 840 is used. > + - For compatible property "qcom,spmi-adc7", valid values are 85, 340 > + and 1360. If property is not found, default value of 1360 is used. We express constraints in schema now, don't duplicate with free form text. > - For compatible property "qcom,spmi-adc-rev2", valid values are 256, > 512 and 1024. If property is not present, default value is 1024. > > @@ -122,11 +127,11 @@ patternProperties: > channel calibration. If property is not found, channel will be > calibrated with 0.625V and 1.25V reference channels, also > known as absolute calibration. > - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", > - if this property is specified VADC will use the VDD reference (1.875V) > - and GND for channel calibration. If property is not found, channel > - will be calibrated with 0V and 1.25V reference channels, also known > - as absolute calibration. > + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and > + "qcom,spmi-adc-rev2", if this property is specified VADC will use > + the VDD reference (1.875V) and GND for channel calibration. If > + property is not found, channel will be calibrated with 0V and 1.25V > + reference channels, also known as absolute calibration. > type: boolean > > qcom,hw-settle-time: > @@ -149,6 +154,12 @@ patternProperties: > Certain controller digital versions have valid values of > 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms > If property is not found, channel will use 15us. > + - For compatible property "qcom,spmi-adc7", delay = 15us for > + value 0, 100us * (value) for values < 8, 1ms for value 8 > + and 2ms * (value - 8) otherwise. > + Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, > + 4000, 8000, 16000, 32000, 64000, 128000 us. > + If property is not found, channel will use 15us. > > qcom,avg-samples: > $ref: /schemas/types.yaml#/definitions/uint32 > @@ -160,6 +171,9 @@ patternProperties: > - For compatible property "qcom,spmi-vadc", valid values > are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 > If property is not found, 1 sample will be used. > + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" > + and "qcom,spmi-adc-rev2", valid values are: 1, 2, 4, 8, 16. > + If property is not found, 1 sample will be used. > > required: > - reg > @@ -244,6 +258,32 @@ allOf: > enum: [ 1, 2, 4, 8, 16 ] > default: 1 > > + - if: > + properties: > + compatible: > + contains: > + const: qcom,spmi-adc7 > + > + then: > + patternProperties: > + "^.*@[0-9a-fx]+$": 'x' should not be in unit-addresses. > + properties: > + qcom,decimation: > + items: Not an array, so 'items' doesn't make sense here. > + enum: [ 85, 340, 1360 ] > + default: 1360 > + > + qcom,hw-settle-time: > + items: > + enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, > + 8000, 16000, 32000, 64000, 128000 ] > + default: 15 > + > + qcom,avg-samples: > + items: > + enum: [ 1, 2, 4, 8, 16 ] > + default: 1 > + > examples: > - | > spmi_bus {
Hi Rob, On 4/21/2020 3:32 AM, Rob Herring wrote: > On Wed, Apr 15, 2020 at 02:47:45PM +0530, Jishnu Prakash wrote: >> of 512 will be used. >> - For compatible property "qcom,spmi-adc5", valid values are 250, 420 >> and 840. If property is not found, default value of 840 is used. >> + - For compatible property "qcom,spmi-adc7", valid values are 85, 340 >> + and 1360. If property is not found, default value of 1360 is used. > We express constraints in schema now, don't duplicate with free form > text. I'll remove the redundant parts of the descriptions in the next post. > >> - For compatible property "qcom,spmi-adc-rev2", valid values are 256, >> 512 and 1024. If property is not present, default value is 1024. >> + then: >> + patternProperties: >> + "^.*@[0-9a-fx]+$": > 'x' should not be in unit-addresses. I'll remove it in the next post. > >> + properties: >> + qcom,decimation: >> + items: > Not an array, so 'items' doesn't make sense here. I'll remove it in the next post. > >> + enum: [ 85, 340, 1360 ] >> + default: 1360 >> + >>
Hi Jonathan, On 4/18/2020 9:48 PM, Jonathan Cameron wrote: > On Wed, 15 Apr 2020 14:47:45 +0530 > Jishnu Prakash <jprakash@codeaurora.org> wrote: > > We are enforcing them in the binding. Does it make sense to put them here as well? > Just seems like something that will get out of sync to me. I'll remove the redundant parts of the descriptions in the next post. >
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 8273981..62aa311 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -13,7 +13,7 @@ maintainers: description: | SPMI PMIC voltage ADC (VADC) provides interface to clients to read voltage. The VADC is a 15-bit sigma-delta ADC. - SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read + SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read voltage. The VADC is a 16-bit sigma-delta ADC. properties: @@ -28,6 +28,7 @@ properties: - qcom,spmi-vadc - qcom,spmi-adc5 - qcom,spmi-adc-rev2 + - qcom,spmi-adc7 reg: description: VADC base address in the SPMI PMIC register map @@ -70,6 +71,8 @@ patternProperties: description: | ADC channel number. See include/dt-bindings/iio/qcom,spmi-vadc.h + For PMIC7 ADC, the channel numbers are specified separately per PMIC + in the PMIC-specific files in include/dt-bindings/iio/. label: $ref: /schemas/types.yaml#/definitions/string @@ -89,6 +92,8 @@ patternProperties: of 512 will be used. - For compatible property "qcom,spmi-adc5", valid values are 250, 420 and 840. If property is not found, default value of 840 is used. + - For compatible property "qcom,spmi-adc7", valid values are 85, 340 + and 1360. If property is not found, default value of 1360 is used. - For compatible property "qcom,spmi-adc-rev2", valid values are 256, 512 and 1024. If property is not present, default value is 1024. @@ -122,11 +127,11 @@ patternProperties: channel calibration. If property is not found, channel will be calibrated with 0.625V and 1.25V reference channels, also known as absolute calibration. - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2", - if this property is specified VADC will use the VDD reference (1.875V) - and GND for channel calibration. If property is not found, channel - will be calibrated with 0V and 1.25V reference channels, also known - as absolute calibration. + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and + "qcom,spmi-adc-rev2", if this property is specified VADC will use + the VDD reference (1.875V) and GND for channel calibration. If + property is not found, channel will be calibrated with 0V and 1.25V + reference channels, also known as absolute calibration. type: boolean qcom,hw-settle-time: @@ -149,6 +154,12 @@ patternProperties: Certain controller digital versions have valid values of 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms If property is not found, channel will use 15us. + - For compatible property "qcom,spmi-adc7", delay = 15us for + value 0, 100us * (value) for values < 8, 1ms for value 8 + and 2ms * (value - 8) otherwise. + Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, + 4000, 8000, 16000, 32000, 64000, 128000 us. + If property is not found, channel will use 15us. qcom,avg-samples: $ref: /schemas/types.yaml#/definitions/uint32 @@ -160,6 +171,9 @@ patternProperties: - For compatible property "qcom,spmi-vadc", valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 If property is not found, 1 sample will be used. + - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" + and "qcom,spmi-adc-rev2", valid values are: 1, 2, 4, 8, 16. + If property is not found, 1 sample will be used. required: - reg @@ -244,6 +258,32 @@ allOf: enum: [ 1, 2, 4, 8, 16 ] default: 1 + - if: + properties: + compatible: + contains: + const: qcom,spmi-adc7 + + then: + patternProperties: + "^.*@[0-9a-fx]+$": + properties: + qcom,decimation: + items: + enum: [ 85, 340, 1360 ] + default: 1360 + + qcom,hw-settle-time: + items: + enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, + 8000, 16000, 32000, 64000, 128000 ] + default: 15 + + qcom,avg-samples: + items: + enum: [ 1, 2, 4, 8, 16 ] + default: 1 + examples: - | spmi_bus { diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h new file mode 100644 index 0000000..9426f27 --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H + +#ifndef PM8350_SID +#define PM8350_SID 1 +#endif + +/* ADC channels for PM8350_ADC for PMIC7 */ +#define PM8350_ADC7_REF_GND (PM8350_SID << 8 | 0x0) +#define PM8350_ADC7_1P25VREF (PM8350_SID << 8 | 0x01) +#define PM8350_ADC7_VREF_VADC (PM8350_SID << 8 | 0x02) +#define PM8350_ADC7_DIE_TEMP (PM8350_SID << 8 | 0x03) + +#define PM8350_ADC7_AMUX_THM1 (PM8350_SID << 8 | 0x04) +#define PM8350_ADC7_AMUX_THM2 (PM8350_SID << 8 | 0x05) +#define PM8350_ADC7_AMUX_THM3 (PM8350_SID << 8 | 0x06) +#define PM8350_ADC7_AMUX_THM4 (PM8350_SID << 8 | 0x07) +#define PM8350_ADC7_AMUX_THM5 (PM8350_SID << 8 | 0x08) +#define PM8350_ADC7_GPIO1 (PM8350_SID << 8 | 0x0a) +#define PM8350_ADC7_GPIO2 (PM8350_SID << 8 | 0x0b) +#define PM8350_ADC7_GPIO3 (PM8350_SID << 8 | 0x0c) +#define PM8350_ADC7_GPIO4 (PM8350_SID << 8 | 0x0d) + +/* 30k pull-up1 */ +#define PM8350_ADC7_AMUX_THM1_30K_PU (PM8350_SID << 8 | 0x24) +#define PM8350_ADC7_AMUX_THM2_30K_PU (PM8350_SID << 8 | 0x25) +#define PM8350_ADC7_AMUX_THM3_30K_PU (PM8350_SID << 8 | 0x26) +#define PM8350_ADC7_AMUX_THM4_30K_PU (PM8350_SID << 8 | 0x27) +#define PM8350_ADC7_AMUX_THM5_30K_PU (PM8350_SID << 8 | 0x28) +#define PM8350_ADC7_GPIO1_30K_PU (PM8350_SID << 8 | 0x2a) +#define PM8350_ADC7_GPIO2_30K_PU (PM8350_SID << 8 | 0x2b) +#define PM8350_ADC7_GPIO3_30K_PU (PM8350_SID << 8 | 0x2c) +#define PM8350_ADC7_GPIO4_30K_PU (PM8350_SID << 8 | 0x2d) + +/* 100k pull-up2 */ +#define PM8350_ADC7_AMUX_THM1_100K_PU (PM8350_SID << 8 | 0x44) +#define PM8350_ADC7_AMUX_THM2_100K_PU (PM8350_SID << 8 | 0x45) +#define PM8350_ADC7_AMUX_THM3_100K_PU (PM8350_SID << 8 | 0x46) +#define PM8350_ADC7_AMUX_THM4_100K_PU (PM8350_SID << 8 | 0x47) +#define PM8350_ADC7_AMUX_THM5_100K_PU (PM8350_SID << 8 | 0x48) +#define PM8350_ADC7_GPIO1_100K_PU (PM8350_SID << 8 | 0x4a) +#define PM8350_ADC7_GPIO2_100K_PU (PM8350_SID << 8 | 0x4b) +#define PM8350_ADC7_GPIO3_100K_PU (PM8350_SID << 8 | 0x4c) +#define PM8350_ADC7_GPIO4_100K_PU (PM8350_SID << 8 | 0x4d) + +/* 400k pull-up3 */ +#define PM8350_ADC7_AMUX_THM1_400K_PU (PM8350_SID << 8 | 0x64) +#define PM8350_ADC7_AMUX_THM2_400K_PU (PM8350_SID << 8 | 0x65) +#define PM8350_ADC7_AMUX_THM3_400K_PU (PM8350_SID << 8 | 0x66) +#define PM8350_ADC7_AMUX_THM4_400K_PU (PM8350_SID << 8 | 0x67) +#define PM8350_ADC7_AMUX_THM5_400K_PU (PM8350_SID << 8 | 0x68) +#define PM8350_ADC7_GPIO1_400K_PU (PM8350_SID << 8 | 0x6a) +#define PM8350_ADC7_GPIO2_400K_PU (PM8350_SID << 8 | 0x6b) +#define PM8350_ADC7_GPIO3_400K_PU (PM8350_SID << 8 | 0x6c) +#define PM8350_ADC7_GPIO4_400K_PU (PM8350_SID << 8 | 0x6d) + +/* 1/3 Divider */ +#define PM8350_ADC7_GPIO4_DIV3 (PM8350_SID << 8 | 0x8d) + +#define PM8350_ADC7_VPH_PWR (PM8350_SID << 8 | 0x8e) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PM8350_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h new file mode 100644 index 0000000..dc2497c --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM8350B_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PM8350B_H + +#ifndef PM8350B_SID +#define PM8350B_SID 3 +#endif + +/* ADC channels for PM8350B_ADC for PMIC7 */ +#define PM8350B_ADC7_REF_GND (PM8350B_SID << 8 | 0x0) +#define PM8350B_ADC7_1P25VREF (PM8350B_SID << 8 | 0x01) +#define PM8350B_ADC7_VREF_VADC (PM8350B_SID << 8 | 0x02) +#define PM8350B_ADC7_DIE_TEMP (PM8350B_SID << 8 | 0x03) + +#define PM8350B_ADC7_AMUX_THM1 (PM8350B_SID << 8 | 0x04) +#define PM8350B_ADC7_AMUX_THM2 (PM8350B_SID << 8 | 0x05) +#define PM8350B_ADC7_AMUX_THM3 (PM8350B_SID << 8 | 0x06) +#define PM8350B_ADC7_AMUX_THM4 (PM8350B_SID << 8 | 0x07) +#define PM8350B_ADC7_AMUX_THM5 (PM8350B_SID << 8 | 0x08) +#define PM8350B_ADC7_AMUX_THM6 (PM8350B_SID << 8 | 0x09) +#define PM8350B_ADC7_GPIO1 (PM8350B_SID << 8 | 0x0a) +#define PM8350B_ADC7_GPIO2 (PM8350B_SID << 8 | 0x0b) +#define PM8350B_ADC7_GPIO3 (PM8350B_SID << 8 | 0x0c) +#define PM8350B_ADC7_GPIO4 (PM8350B_SID << 8 | 0x0d) + +#define PM8350B_ADC7_CHG_TEMP (PM8350B_SID << 8 | 0x10) +#define PM8350B_ADC7_USB_IN_V_16 (PM8350B_SID << 8 | 0x11) +#define PM8350B_ADC7_VDC_16 (PM8350B_SID << 8 | 0x12) +#define PM8350B_ADC7_CC1_ID (PM8350B_SID << 8 | 0x13) +#define PM8350B_ADC7_VREF_BAT_THERM (PM8350B_SID << 8 | 0x15) +#define PM8350B_ADC7_IIN_FB (PM8350B_SID << 8 | 0x17) + +/* 30k pull-up1 */ +#define PM8350B_ADC7_AMUX_THM1_30K_PU (PM8350B_SID << 8 | 0x24) +#define PM8350B_ADC7_AMUX_THM2_30K_PU (PM8350B_SID << 8 | 0x25) +#define PM8350B_ADC7_AMUX_THM3_30K_PU (PM8350B_SID << 8 | 0x26) +#define PM8350B_ADC7_AMUX_THM4_30K_PU (PM8350B_SID << 8 | 0x27) +#define PM8350B_ADC7_AMUX_THM5_30K_PU (PM8350B_SID << 8 | 0x28) +#define PM8350B_ADC7_AMUX_THM6_30K_PU (PM8350B_SID << 8 | 0x29) +#define PM8350B_ADC7_GPIO1_30K_PU (PM8350B_SID << 8 | 0x2a) +#define PM8350B_ADC7_GPIO2_30K_PU (PM8350B_SID << 8 | 0x2b) +#define PM8350B_ADC7_GPIO3_30K_PU (PM8350B_SID << 8 | 0x2c) +#define PM8350B_ADC7_GPIO4_30K_PU (PM8350B_SID << 8 | 0x2d) +#define PM8350B_ADC7_CC1_ID_30K_PU (PM8350B_SID << 8 | 0x33) + +/* 100k pull-up2 */ +#define PM8350B_ADC7_AMUX_THM1_100K_PU (PM8350B_SID << 8 | 0x44) +#define PM8350B_ADC7_AMUX_THM2_100K_PU (PM8350B_SID << 8 | 0x45) +#define PM8350B_ADC7_AMUX_THM3_100K_PU (PM8350B_SID << 8 | 0x46) +#define PM8350B_ADC7_AMUX_THM4_100K_PU (PM8350B_SID << 8 | 0x47) +#define PM8350B_ADC7_AMUX_THM5_100K_PU (PM8350B_SID << 8 | 0x48) +#define PM8350B_ADC7_AMUX_THM6_100K_PU (PM8350B_SID << 8 | 0x49) +#define PM8350B_ADC7_GPIO1_100K_PU (PM8350B_SID << 8 | 0x4a) +#define PM8350B_ADC7_GPIO2_100K_PU (PM8350B_SID << 8 | 0x4b) +#define PM8350B_ADC7_GPIO3_100K_PU (PM8350B_SID << 8 | 0x4c) +#define PM8350B_ADC7_GPIO4_100K_PU (PM8350B_SID << 8 | 0x4d) +#define PM8350B_ADC7_CC1_ID_100K_PU (PM8350B_SID << 8 | 0x53) + +/* 400k pull-up3 */ +#define PM8350B_ADC7_AMUX_THM1_400K_PU (PM8350B_SID << 8 | 0x64) +#define PM8350B_ADC7_AMUX_THM2_400K_PU (PM8350B_SID << 8 | 0x65) +#define PM8350B_ADC7_AMUX_THM3_400K_PU (PM8350B_SID << 8 | 0x66) +#define PM8350B_ADC7_AMUX_THM4_400K_PU (PM8350B_SID << 8 | 0x67) +#define PM8350B_ADC7_AMUX_THM5_400K_PU (PM8350B_SID << 8 | 0x68) +#define PM8350B_ADC7_AMUX_THM6_400K_PU (PM8350B_SID << 8 | 0x69) +#define PM8350B_ADC7_GPIO1_400K_PU (PM8350B_SID << 8 | 0x6a) +#define PM8350B_ADC7_GPIO2_400K_PU (PM8350B_SID << 8 | 0x6b) +#define PM8350B_ADC7_GPIO3_400K_PU (PM8350B_SID << 8 | 0x6c) +#define PM8350B_ADC7_GPIO4_400K_PU (PM8350B_SID << 8 | 0x6d) +#define PM8350B_ADC7_CC1_ID_400K_PU (PM8350B_SID << 8 | 0x73) + +/* 1/3 Divider */ +#define PM8350B_ADC7_GPIO1_DIV3 (PM8350B_SID << 8 | 0x8a) +#define PM8350B_ADC7_GPIO2_DIV3 (PM8350B_SID << 8 | 0x8b) +#define PM8350B_ADC7_GPIO3_DIV3 (PM8350B_SID << 8 | 0x8c) +#define PM8350B_ADC7_GPIO4_DIV3 (PM8350B_SID << 8 | 0x8d) + +#define PM8350B_ADC7_VPH_PWR (PM8350B_SID << 8 | 0x8e) +#define PM8350B_ADC7_VBAT_SNS (PM8350B_SID << 8 | 0x8f) + +#define PM8350B_ADC7_SBUx (PM8350B_SID << 8 | 0x94) +#define PM8350B_ADC7_VBAT_2S_MID (PM8350B_SID << 8 | 0x96) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PM8350B_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h b/include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h new file mode 100644 index 0000000..6c29687 --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PMK8350_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PMK8350_H + +#ifndef PMK8350_SID +#define PMK8350_SID 0 +#endif + +/* ADC channels for PMK8350_ADC for PMIC7 */ +#define PMK8350_ADC7_REF_GND (PMK8350_SID << 8 | 0x0) +#define PMK8350_ADC7_1P25VREF (PMK8350_SID << 8 | 0x01) +#define PMK8350_ADC7_VREF_VADC (PMK8350_SID << 8 | 0x02) +#define PMK8350_ADC7_DIE_TEMP (PMK8350_SID << 8 | 0x03) + +#define PMK8350_ADC7_AMUX_THM1 (PMK8350_SID << 8 | 0x04) +#define PMK8350_ADC7_AMUX_THM2 (PMK8350_SID << 8 | 0x05) +#define PMK8350_ADC7_AMUX_THM3 (PMK8350_SID << 8 | 0x06) +#define PMK8350_ADC7_AMUX_THM4 (PMK8350_SID << 8 | 0x07) +#define PMK8350_ADC7_AMUX_THM5 (PMK8350_SID << 8 | 0x08) + +/* 30k pull-up1 */ +#define PMK8350_ADC7_AMUX_THM1_30K_PU (PMK8350_SID << 8 | 0x24) +#define PMK8350_ADC7_AMUX_THM2_30K_PU (PMK8350_SID << 8 | 0x25) +#define PMK8350_ADC7_AMUX_THM3_30K_PU (PMK8350_SID << 8 | 0x26) +#define PMK8350_ADC7_AMUX_THM4_30K_PU (PMK8350_SID << 8 | 0x27) +#define PMK8350_ADC7_AMUX_THM5_30K_PU (PMK8350_SID << 8 | 0x28) + +/* 100k pull-up2 */ +#define PMK8350_ADC7_AMUX_THM1_100K_PU (PMK8350_SID << 8 | 0x44) +#define PMK8350_ADC7_AMUX_THM2_100K_PU (PMK8350_SID << 8 | 0x45) +#define PMK8350_ADC7_AMUX_THM3_100K_PU (PMK8350_SID << 8 | 0x46) +#define PMK8350_ADC7_AMUX_THM4_100K_PU (PMK8350_SID << 8 | 0x47) +#define PMK8350_ADC7_AMUX_THM5_100K_PU (PMK8350_SID << 8 | 0x48) + +/* 400k pull-up3 */ +#define PMK8350_ADC7_AMUX_THM1_400K_PU (PMK8350_SID << 8 | 0x64) +#define PMK8350_ADC7_AMUX_THM2_400K_PU (PMK8350_SID << 8 | 0x65) +#define PMK8350_ADC7_AMUX_THM3_400K_PU (PMK8350_SID << 8 | 0x66) +#define PMK8350_ADC7_AMUX_THM4_400K_PU (PMK8350_SID << 8 | 0x67) +#define PMK8350_ADC7_AMUX_THM5_400K_PU (PMK8350_SID << 8 | 0x68) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PMK8350_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h new file mode 100644 index 0000000..d6df1b1 --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PMR735A_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PMR735A_H + +#ifndef PMR735A_SID +#define PMR735A_SID 4 +#endif + +/* ADC channels for PMR735A_ADC for PMIC7 */ +#define PMR735A_ADC7_REF_GND (PMR735A_SID << 8 | 0x0) +#define PMR735A_ADC7_1P25VREF (PMR735A_SID << 8 | 0x01) +#define PMR735A_ADC7_VREF_VADC (PMR735A_SID << 8 | 0x02) +#define PMR735A_ADC7_DIE_TEMP (PMR735A_SID << 8 | 0x03) + +#define PMR735A_ADC7_GPIO1 (PMR735A_SID << 8 | 0x0a) +#define PMR735A_ADC7_GPIO2 (PMR735A_SID << 8 | 0x0b) +#define PMR735A_ADC7_GPIO3 (PMR735A_SID << 8 | 0x0c) + +/* 100k pull-up2 */ +#define PMR735A_ADC7_GPIO1_100K_PU (PMR735A_SID << 8 | 0x4a) +#define PMR735A_ADC7_GPIO2_100K_PU (PMR735A_SID << 8 | 0x4b) +#define PMR735A_ADC7_GPIO3_100K_PU (PMR735A_SID << 8 | 0x4c) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PMR735A_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h new file mode 100644 index 0000000..8da0e7d --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PMR735B_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PMR735B_H + +#ifndef PMR735B_SID +#define PMR735B_SID 5 +#endif + +/* ADC channels for PMR735B_ADC for PMIC7 */ +#define PMR735B_ADC7_REF_GND (PMR735B_SID << 8 | 0x0) +#define PMR735B_ADC7_1P25VREF (PMR735B_SID << 8 | 0x01) +#define PMR735B_ADC7_VREF_VADC (PMR735B_SID << 8 | 0x02) +#define PMR735B_ADC7_DIE_TEMP (PMR735B_SID << 8 | 0x03) + +#define PMR735B_ADC7_GPIO1 (PMR735B_SID << 8 | 0x0a) +#define PMR735B_ADC7_GPIO2 (PMR735B_SID << 8 | 0x0b) +#define PMR735B_ADC7_GPIO3 (PMR735B_SID << 8 | 0x0c) + +/* 100k pull-up2 */ +#define PMR735B_ADC7_GPIO1_100K_PU (PMR735B_SID << 8 | 0x4a) +#define PMR735B_ADC7_GPIO2_100K_PU (PMR735B_SID << 8 | 0x4b) +#define PMR735B_ADC7_GPIO3_100K_PU (PMR735B_SID << 8 | 0x4c) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PMR735B_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h index 61d556d..08adfe2 100644 --- a/include/dt-bindings/iio/qcom,spmi-vadc.h +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright (c) 2012-2014,2018 The Linux Foundation. All rights reserved. + * Copyright (c) 2012-2014,2018,2020 The Linux Foundation. All rights reserved. */ #ifndef _DT_BINDINGS_QCOM_SPMI_VADC_H @@ -221,4 +221,80 @@ #define ADC5_MAX_CHANNEL 0xc0 +/* ADC channels for ADC for PMIC7 */ + +#define ADC7_REF_GND 0x00 +#define ADC7_1P25VREF 0x01 +#define ADC7_VREF_VADC 0x02 +#define ADC7_DIE_TEMP 0x03 + +#define ADC7_AMUX_THM1 0x04 +#define ADC7_AMUX_THM2 0x05 +#define ADC7_AMUX_THM3 0x06 +#define ADC7_AMUX_THM4 0x07 +#define ADC7_AMUX_THM5 0x08 +#define ADC7_AMUX_THM6 0x09 +#define ADC7_GPIO1 0x0a +#define ADC7_GPIO2 0x0b +#define ADC7_GPIO3 0x0c +#define ADC7_GPIO4 0x0d + +#define ADC7_CHG_TEMP 0x10 +#define ADC7_USB_IN_V_16 0x11 +#define ADC7_VDC_16 0x12 +#define ADC7_CC1_ID 0x13 +#define ADC7_VREF_BAT_THERM 0x15 +#define ADC7_IIN_FB 0x17 + +/* 30k pull-up1 */ +#define ADC7_AMUX_THM1_30K_PU 0x24 +#define ADC7_AMUX_THM2_30K_PU 0x25 +#define ADC7_AMUX_THM3_30K_PU 0x26 +#define ADC7_AMUX_THM4_30K_PU 0x27 +#define ADC7_AMUX_THM5_30K_PU 0x28 +#define ADC7_AMUX_THM6_30K_PU 0x29 +#define ADC7_GPIO1_30K_PU 0x2a +#define ADC7_GPIO2_30K_PU 0x2b +#define ADC7_GPIO3_30K_PU 0x2c +#define ADC7_GPIO4_30K_PU 0x2d +#define ADC7_CC1_ID_30K_PU 0x33 + +/* 100k pull-up2 */ +#define ADC7_AMUX_THM1_100K_PU 0x44 +#define ADC7_AMUX_THM2_100K_PU 0x45 +#define ADC7_AMUX_THM3_100K_PU 0x46 +#define ADC7_AMUX_THM4_100K_PU 0x47 +#define ADC7_AMUX_THM5_100K_PU 0x48 +#define ADC7_AMUX_THM6_100K_PU 0x49 +#define ADC7_GPIO1_100K_PU 0x4a +#define ADC7_GPIO2_100K_PU 0x4b +#define ADC7_GPIO3_100K_PU 0x4c +#define ADC7_GPIO4_100K_PU 0x4d +#define ADC7_CC1_ID_100K_PU 0x53 + +/* 400k pull-up3 */ +#define ADC7_AMUX_THM1_400K_PU 0x64 +#define ADC7_AMUX_THM2_400K_PU 0x65 +#define ADC7_AMUX_THM3_400K_PU 0x66 +#define ADC7_AMUX_THM4_400K_PU 0x67 +#define ADC7_AMUX_THM5_400K_PU 0x68 +#define ADC7_AMUX_THM6_400K_PU 0x69 +#define ADC7_GPIO1_400K_PU 0x6a +#define ADC7_GPIO2_400K_PU 0x6b +#define ADC7_GPIO3_400K_PU 0x6c +#define ADC7_GPIO4_400K_PU 0x6d +#define ADC7_CC1_ID_400K_PU 0x73 + +/* 1/3 Divider */ +#define ADC7_GPIO1_DIV3 0x8a +#define ADC7_GPIO2_DIV3 0x8b +#define ADC7_GPIO3_DIV3 0x8c +#define ADC7_GPIO4_DIV3 0x8d + +#define ADC7_VPH_PWR 0x8e +#define ADC7_VBAT_SNS 0x8f + +#define ADC7_SBUx 0x94 +#define ADC7_VBAT_2S_MID 0x96 + #endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */
Add documentation for PMIC7 ADC peripheral. For the PMIC7-type PMICs, ADC peripheral is present in HW for the following PMICs: PMK8350, PM8350, PM8350b, PMR735a and PMR735b. Of these, only the ADC peripheral on PMK8350 is exposed directly to SW. If SW needs to communicate with ADCs on other PMICs, it specifies the PMIC to PMK8350 through the newly added SID register and communication between PMK8350 ADC and other PMIC ADCs is carried out through PBS(Programmable Boot Sequence) at the firmware level. In addition, add definitions for ADC channels and virtual channel definitions (combination of ADC channel number and PMIC SID number) per PMIC, to be used by ADC clients for PMIC7. Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org> --- .../bindings/iio/adc/qcom,spmi-vadc.yaml | 52 +++++++++++-- include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h | 67 ++++++++++++++++ include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h | 88 ++++++++++++++++++++++ include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h | 46 +++++++++++ include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h | 28 +++++++ include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h | 28 +++++++ include/dt-bindings/iio/qcom,spmi-vadc.h | 78 ++++++++++++++++++- 7 files changed, 380 insertions(+), 7 deletions(-) create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pm8350.h create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pm8350b.h create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmk8350.h create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmr735a.h create mode 100644 include/dt-bindings/iio/qcom,spmi-adc7-pmr735b.h