[V4,1/4] dt-bindings: thermal: qcom: add PMIC5 Gen2 ADC_TM bindings

Commit Message

Jishnu Prakash Jan. 24, 2022, 4:23 a.m. UTC

Add documentation for PMIC5 Gen2 ADC_TM peripheral.
It is used for monitoring ADC channel thresholds for PMIC7-type
PMICs. It is present on PMK8350, like PMIC7 ADC and can be used
to monitor up to 8 ADC channels, from any of the PMIC7 PMICs
on a target, through PBS(Programmable Boot Sequence).

Signed-off-by: Jishnu Prakash <[e-mail]>
Reviewed-by: Jonathan Cameron <[e-mail]>
Reviewed-by: Rob Herring <[e-mail]>
---
 .../bindings/thermal/qcom-spmi-adc-tm5.yaml        | 110 ++++++++++++++++++++-
 1 file changed, 108 insertions(+), 2 deletions(-)

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
index 3ea8c0c..feb390d 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -10,7 +10,9 @@  maintainers:
 
 properties:
   compatible:
-    const: qcom,spmi-adc-tm5
+    enum:
+      - qcom,spmi-adc-tm5
+      - qcom,spmi-adc-tm5-gen2
 
   reg:
     maxItems: 1
@@ -33,6 +35,7 @@  properties:
   qcom,avg-samples:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Number of samples to be used for measurement.
+            Not applicable for Gen2 ADC_TM peripheral.
     enum:
       - 1
       - 2
@@ -45,6 +48,7 @@  properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: This parameter is used to decrease ADC sampling rate.
             Quicker measurements can be made by reducing decimation ratio.
+            Not applicable for Gen2 ADC_TM peripheral.
     enum:
       - 250
       - 420
@@ -93,6 +97,29 @@  patternProperties:
           - const: 1
           - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
 
+      qcom,avg-samples:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Number of samples to be used for measurement.
+          This property in child node is applicable only for Gen2 ADC_TM peripheral.
+        enum:
+          - 1
+          - 2
+          - 4
+          - 8
+          - 16
+        default: 1
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: This parameter is used to decrease ADC sampling rate.
+          Quicker measurements can be made by reducing decimation ratio.
+          This property in child node is applicable only for Gen2 ADC_TM peripheral.
+        enum:
+          - 85
+          - 340
+          - 1360
+        default: 1360
+
     required:
       - reg
       - io-channels
@@ -100,6 +127,31 @@  patternProperties:
     additionalProperties:
       false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-tm5
+
+    then:
+      patternProperties:
+        "^([-a-z0-9]*)@[0-7]$":
+          properties:
+            qcom,decimation: false
+            qcom,avg-samples: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-tm5-gen2
+
+    then:
+      properties:
+        qcom,avg-samples: false
+        qcom,decimation: false
+
 required:
   - compatible
   - reg
@@ -124,7 +176,7 @@  examples:
             #size-cells = <0>;
             #io-channel-cells = <1>;
 
-            /* Other propreties are omitted */
+            /* Other properties are omitted */
             conn-therm@4f {
                 reg = <ADC5_AMUX_THM3_100K_PU>;
                 qcom,ratiometric;
@@ -148,4 +200,58 @@  examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+    #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmk8350_vadc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc7";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            xo-therm@44 {
+                reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+
+            conn-therm@47 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        pmk8350_adc_tm: adc-tm@3400 {
+            compatible = "qcom,spmi-adc-tm5-gen2";
+            reg = <0x3400>;
+            interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmk8350-xo-therm@0 {
+                reg = <0>;
+                io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,decimation = <340>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+
+            conn-therm@1 {
+                reg = <1>;
+                io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>;
+                qcom,avg-samples = <2>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
 ...