From patchwork Wed Aug 3 09:12:25 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bough Chen X-Patchwork-Id: 12935312 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2487FC19F2C for ; Wed, 3 Aug 2022 09:29:22 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237478AbiHCJ3U (ORCPT ); Wed, 3 Aug 2022 05:29:20 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47160 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237469AbiHCJ3L (ORCPT ); Wed, 3 Aug 2022 05:29:11 -0400 Received: from inva021.nxp.com (inva021.nxp.com [92.121.34.21]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D3DCF5A15D; Wed, 3 Aug 2022 02:29:09 -0700 (PDT) Received: from inva021.nxp.com (localhost [127.0.0.1]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id 1F83120089C; Wed, 3 Aug 2022 11:29:08 +0200 (CEST) Received: from aprdc01srsp001v.ap-rdc01.nxp.com (aprdc01srsp001v.ap-rdc01.nxp.com [165.114.16.16]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id B0259200891; Wed, 3 Aug 2022 11:29:07 +0200 (CEST) Received: from localhost.localdomain (shlinux2.ap.freescale.net [10.192.224.44]) by aprdc01srsp001v.ap-rdc01.nxp.com (Postfix) with ESMTP id 2E6901820F56; Wed, 3 Aug 2022 17:29:06 +0800 (+08) From: haibo.chen@nxp.com To: jic23@kernel.org, lars@metafoo.de, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org, s.hauer@pengutronix.de Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, haibo.chen@nxp.com Subject: [PATCH 1/3] iio: adc: add imx93 adc support Date: Wed, 3 Aug 2022 17:12:25 +0800 Message-Id: <1659517947-11207-1-git-send-email-haibo.chen@nxp.com> X-Mailer: git-send-email 2.7.4 X-Virus-Scanned: ClamAV using ClamSMTP Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org From: Haibo Chen The ADC in i.mx93 is a total new ADC IP, add a driver to support this ADC. Currently, only support one shot normal conversion triggered by software. For other mode, will add in future. Signed-off-by: Haibo Chen --- MAINTAINERS | 4 +- drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/imx93_adc.c | 448 ++++++++++++++++++++++++++++++++++++ 4 files changed, 462 insertions(+), 1 deletion(-) create mode 100644 drivers/iio/adc/imx93_adc.c diff --git a/MAINTAINERS b/MAINTAINERS index 779f599f9abf..b0724635fb49 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14620,14 +14620,16 @@ S: Maintained F: Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml F: drivers/iio/adc/imx8qxp-adc.c -NXP i.MX 7D/6SX/6UL AND VF610 ADC DRIVER +NXP i.MX 7D/6SX/6UL/93 AND VF610 ADC DRIVER M: Haibo Chen L: linux-iio@vger.kernel.org L: linux-imx@nxp.com S: Maintained F: Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml F: Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml +F: Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml F: drivers/iio/adc/imx7d_adc.c +F: drivers/iio/adc/imx93_adc.c F: drivers/iio/adc/vf610_adc.c NXP PF8100/PF8121A/PF8200 PMIC REGULATOR DEVICE DRIVER diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 7fe5930891e0..95399a0acbf4 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -550,6 +550,16 @@ config IMX8QXP_ADC This driver can also be built as a module. If so, the module will be called imx8qxp-adc. +config IMX93_ADC + tristate "IMX93 ADC driver" + depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM + help + Say yes here to build support for IMX93 ADC. + + This driver can also be built as a module. If so, the module will be + called imx93_adc. + config LP8788_ADC tristate "LP8788 ADC driver" depends on MFD_LP8788 diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 1772a549a3c8..64e17b21228b 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_HI8435) += hi8435.o obj-$(CONFIG_HX711) += hx711.o obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o obj-$(CONFIG_IMX8QXP_ADC) += imx8qxp-adc.o +obj-$(CONFIG_IMX93_ADC) += imx93_adc.o obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o obj-$(CONFIG_INGENIC_ADC) += ingenic-adc.o obj-$(CONFIG_INTEL_MRFLD_ADC) += intel_mrfld_adc.o diff --git a/drivers/iio/adc/imx93_adc.c b/drivers/iio/adc/imx93_adc.c new file mode 100644 index 000000000000..6e3cf6d3e629 --- /dev/null +++ b/drivers/iio/adc/imx93_adc.c @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * NXP i.MX93 ADC driver + * + * Copyright 2022 NXP + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IMX93_ADC_DRIVER_NAME "imx93-adc" + +/* Register map definition */ +#define IMX93_ADC_MCR 0x00 +#define IMX93_ADC_MSR 0x04 +#define IMX93_ADC_ISR 0x10 +#define IMX93_ADC_IMR 0x20 +#define IMX93_ADC_CIMR0 0x24 +#define IMX93_ADC_CTR0 0x94 +#define IMX93_ADC_NCMR0 0xA4 +#define IMX93_ADC_PCDR0 0x100 +#define IMX93_ADC_PCDR1 0x104 +#define IMX93_ADC_PCDR2 0x108 +#define IMX93_ADC_PCDR3 0x10c +#define IMX93_ADC_PCDR4 0x110 +#define IMX93_ADC_PCDR5 0x114 +#define IMX93_ADC_PCDR6 0x118 +#define IMX93_ADC_PCDR7 0x11c +#define IMX93_ADC_CALSTAT 0x39C + +/* ADC bit shift */ +#define IMX93_ADC_MCR_MODE_MASK BIT(29) +#define IMX93_ADC_MCR_NSTART_MASK BIT(24) +#define IMX93_ADC_MCR_CALSTART_MASK BIT(14) +#define IMX93_ADC_MCR_ADCLKSE_MASK BIT(8) +#define IMX93_ADC_MCR_PWDN_MASK BIT(0) +#define IMX93_ADC_MSR_CALFAIL_MASK BIT(30) +#define IMX93_ADC_MSR_CALBUSY_MASK BIT(29) +#define IMX93_ADC_MSR_ADCSTATUS_MASK GENMASK(2, 0) +#define IMX93_ADC_ISR_EOC_MASK BIT(1) +#define IMX93_ADC_IMR_JEOC_MASK BIT(3) +#define IMX93_ADC_IMR_JECH_MASK BIT(2) +#define IMX93_ADC_IMR_EOC_MASK BIT(1) +#define IMX93_ADC_IMR_ECH_MASK BIT(0) +#define IMX93_ADC_PCDR_CDATA_MASK GENMASK(11, 0) + +/* ADC status */ +#define IDLE 0 +#define POWER_DOWN 1 +#define WAIT_STATE 2 +#define BUSY_IN_CALIBRATION 3 +#define SAMPLE 4 +#define CONVERSION 6 + +#define IMX93_ADC_TIMEOUT msecs_to_jiffies(100) + +struct imx93_adc { + struct device *dev; + void __iomem *regs; + struct clk *ipg_clk; + struct regulator *vref; + struct mutex lock; + struct completion completion; +}; + +#define IMX93_ADC_CHAN(_idx) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (_idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ +} + +static const struct iio_chan_spec imx93_adc_iio_channels[] = { + IMX93_ADC_CHAN(0), + IMX93_ADC_CHAN(1), + IMX93_ADC_CHAN(2), + IMX93_ADC_CHAN(3), +}; + +static void imx93_adc_power_down(struct imx93_adc *adc) +{ + u32 mcr, msr; + int ret; + + mcr = readl(adc->regs + IMX93_ADC_MCR); + mcr |= FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1); + writel(mcr, adc->regs + IMX93_ADC_MCR); + + ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr, + ((msr & IMX93_ADC_MSR_ADCSTATUS_MASK) == POWER_DOWN), 1, 50); + if (ret == -ETIMEDOUT) + dev_warn(adc->dev, + "ADC do not in power down mode, current MSR is %x\n", + msr); +} + +static void imx93_adc_config_ad_clk(struct imx93_adc *adc) +{ + u32 mcr; + + /* put adc in power down mode */ + imx93_adc_power_down(adc); + + /* config the AD_CLK equal to bus clock */ + mcr = readl(adc->regs + IMX93_ADC_MCR); + mcr |= FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1); + writel(mcr, adc->regs + IMX93_ADC_MCR); + + /* bring ADC out of power down state, in idle state */ + mcr = readl(adc->regs + IMX93_ADC_MCR); + mcr &= ~FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1); + writel(mcr, adc->regs + IMX93_ADC_MCR); +} + +static int imx93_adc_calibration(struct imx93_adc *adc) +{ + u32 mcr, msr, adc_status; + int ret; + + /* make sure ADC in power down mode */ + msr = readl(adc->regs + IMX93_ADC_MSR); + adc_status = FIELD_GET(IMX93_ADC_MSR_ADCSTATUS_MASK, msr); + if (adc_status != POWER_DOWN) + imx93_adc_power_down(adc); + + /* config SAR controller operating clock */ + mcr = readl(adc->regs + IMX93_ADC_MCR); + mcr &= ~FIELD_PREP(IMX93_ADC_MCR_ADCLKSE_MASK, 1); + writel(mcr, adc->regs + IMX93_ADC_MCR); + + /* bring ADC out of power down state */ + mcr = readl(adc->regs + IMX93_ADC_MCR); + mcr &= ~FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1); + writel(mcr, adc->regs + IMX93_ADC_MCR); + + /* + * TODO: we use the default TSAMP/NRSMPL/AVGEN in MCR, + * can add the setting of these bit if need in future. + */ + + /* run calibration */ + mcr = readl(adc->regs + IMX93_ADC_MCR); + mcr |= FIELD_PREP(IMX93_ADC_MCR_CALSTART_MASK, 1); + writel(mcr, adc->regs + IMX93_ADC_MCR); + + /* wait calibration to be finished */ + ret = readl_poll_timeout(adc->regs + IMX93_ADC_MSR, msr, + !(msr & IMX93_ADC_MSR_CALBUSY_MASK), 1000, 2000000); + if (ret == -ETIMEDOUT) { + dev_warn(adc->dev, "ADC do not finish calibration in 1 min!\n"); + return ret; + } + + /* check whether calbration is success or not */ + msr = readl(adc->regs + IMX93_ADC_MSR); + if (msr & IMX93_ADC_MSR_CALFAIL_MASK) { + dev_warn(adc->dev, "ADC calibration failed!\n"); + return -EAGAIN; + } + + return 0; +} + +static int imx93_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct imx93_adc *adc = iio_priv(indio_dev); + struct device *dev = adc->dev; + u32 channel; + u32 imr, mcr, pcda; + long ret; + u32 vref_uv; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + pm_runtime_get_sync(dev); + mutex_lock(&adc->lock); + + reinit_completion(&adc->completion); + + /* config channel mask register */ + channel = 1 << chan->channel; + writel(channel, adc->regs + IMX93_ADC_NCMR0); + + /* TODO: can config desired sample time in CTRn if need */ + + /* config interrupt mask */ + imr = FIELD_PREP(IMX93_ADC_IMR_EOC_MASK, 1); + writel(imr, adc->regs + IMX93_ADC_IMR); + writel(channel, adc->regs + IMX93_ADC_CIMR0); + + /* config one-shot mode */ + mcr = readl(adc->regs + IMX93_ADC_MCR); + mcr &= ~FIELD_PREP(IMX93_ADC_MCR_MODE_MASK, 1); + writel(mcr, adc->regs + IMX93_ADC_MCR); + + /* start normal conversion */ + mcr = readl(adc->regs + IMX93_ADC_MCR); + mcr |= FIELD_PREP(IMX93_ADC_MCR_NSTART_MASK, 1); + writel(mcr, adc->regs + IMX93_ADC_MCR); + + ret = wait_for_completion_interruptible_timeout(&adc->completion, + IMX93_ADC_TIMEOUT); + if (ret == 0) { + mutex_unlock(&adc->lock); + return -ETIMEDOUT; + } + if (ret < 0) { + mutex_unlock(&adc->lock); + return ret; + } + + pcda = readl(adc->regs + IMX93_ADC_PCDR0 + chan->channel * 4); + + *val = FIELD_GET(IMX93_ADC_PCDR_CDATA_MASK, pcda); + + mutex_unlock(&adc->lock); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_sync_autosuspend(dev); + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + vref_uv = regulator_get_voltage(adc->vref); + *val = vref_uv / 1000; + *val2 = 12; + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = clk_get_rate(adc->ipg_clk); + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static irqreturn_t imx93_adc_isr(int irq, void *dev_id) +{ + struct imx93_adc *adc = dev_id; + u32 isr; + + isr = readl(adc->regs + IMX93_ADC_ISR); + writel(isr, adc->regs + IMX93_ADC_ISR); + + if (FIELD_GET(IMX93_ADC_ISR_EOC_MASK, isr)) + complete(&adc->completion); + + return IRQ_HANDLED; +} + +static const struct iio_info imx93_adc_iio_info = { + .read_raw = &imx93_adc_read_raw, +}; + +static int imx93_adc_probe(struct platform_device *pdev) +{ + struct imx93_adc *adc; + struct iio_dev *indio_dev; + struct device *dev = &pdev->dev; + int irq, ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); + if (!indio_dev) { + dev_err(dev, "Failed allocating iio device\n"); + return -ENOMEM; + } + + adc = iio_priv(indio_dev); + adc->dev = dev; + + mutex_init(&adc->lock); + adc->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(adc->regs)) + return PTR_ERR(adc->regs); + + /* The third irq is for ADC conversion usage */ + irq = platform_get_irq(pdev, 2); + if (irq < 0) + return irq; + + adc->ipg_clk = devm_clk_get(dev, "ipg"); + if (IS_ERR(adc->ipg_clk)) + return dev_err_probe(dev, PTR_ERR(adc->ipg_clk), + "Failed getting clock\n"); + + adc->vref = devm_regulator_get(dev, "vref"); + if (IS_ERR(adc->vref)) + return dev_err_probe(dev, PTR_ERR(adc->vref), + "Failed getting reference voltage\n"); + + ret = regulator_enable(adc->vref); + if (ret) { + dev_err(dev, "Can't enable adc reference top voltage\n"); + return ret; + } + + platform_set_drvdata(pdev, indio_dev); + + init_completion(&adc->completion); + + indio_dev->name = IMX93_ADC_DRIVER_NAME; + indio_dev->info = &imx93_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = imx93_adc_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(imx93_adc_iio_channels); + + ret = clk_prepare_enable(adc->ipg_clk); + if (ret) { + dev_err(&pdev->dev, "Could not prepare or enable the clock.\n"); + return ret; + } + + ret = devm_request_irq(dev, irq, imx93_adc_isr, 0, IMX93_ADC_DRIVER_NAME, adc); + if (ret < 0) { + dev_err(dev, "Failed requesting irq, irq = %d\n", irq); + goto error_ipg_clk_disable; + } + + ret = imx93_adc_calibration(adc); + if (ret < 0) + goto error_ipg_clk_disable; + + imx93_adc_config_ad_clk(adc); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(dev, "Couldn't register the device.\n"); + goto error_ipg_clk_disable; + } + + pm_runtime_set_active(dev); + pm_runtime_set_autosuspend_delay(dev, 50); + pm_runtime_use_autosuspend(dev); + pm_runtime_enable(dev); + + return 0; + +error_ipg_clk_disable: + clk_disable_unprepare(adc->ipg_clk); + regulator_disable(adc->vref); + + return ret; +} + +static int imx93_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct imx93_adc *adc = iio_priv(indio_dev); + struct device *dev = adc->dev; + + pm_runtime_get_sync(dev); + + iio_device_unregister(indio_dev); + imx93_adc_power_down(adc); + clk_disable_unprepare(adc->ipg_clk); + regulator_disable(adc->vref); + + pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); + + return 0; +} + +static int imx93_adc_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct imx93_adc *adc = iio_priv(indio_dev); + + imx93_adc_power_down(adc); + clk_disable_unprepare(adc->ipg_clk); + regulator_disable(adc->vref); + + return 0; +} + +static int imx93_adc_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct imx93_adc *adc = iio_priv(indio_dev); + int ret; + u32 mcr; + + ret = regulator_enable(adc->vref); + if (ret) { + dev_err(dev, + "Can't enable adc reference top voltage, err = %d\n", + ret); + return ret; + } + + ret = clk_prepare_enable(adc->ipg_clk); + if (ret) { + dev_err(dev, "Could not prepare or enable clock.\n"); + goto err_disable_reg; + } + + /* bring ADC out of power down state, in idle state */ + mcr = readl(adc->regs + IMX93_ADC_MCR); + mcr &= ~FIELD_PREP(IMX93_ADC_MCR_PWDN_MASK, 1); + writel(mcr, adc->regs + IMX93_ADC_MCR); + + return 0; + +err_disable_reg: + regulator_disable(adc->vref); + + return ret; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(imx93_adc_pm_ops, + imx93_adc_runtime_suspend, + imx93_adc_runtime_resume, NULL); + +static const struct of_device_id imx93_adc_match[] = { + { .compatible = "nxp,imx93-adc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx93_adc_match); + +static struct platform_driver imx93_adc_driver = { + .probe = imx93_adc_probe, + .remove = imx93_adc_remove, + .driver = { + .name = IMX93_ADC_DRIVER_NAME, + .of_match_table = imx93_adc_match, + .pm = pm_ptr(&imx93_adc_pm_ops), + }, +}; + +module_platform_driver(imx93_adc_driver); + +MODULE_DESCRIPTION("NXP i.MX93 ADC driver"); +MODULE_AUTHOR("Haibo Chen "); +MODULE_LICENSE("GPL");