| Message ID | 20170920151814.22461-3-icenowy@aosc.io (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Icenowy, On 20/09/2017 17:18, Icenowy Zheng wrote: > The ADC rate setup on AXP803 is more complex than AXP20x/22x. > Can you elaborate? I can see two rate settings in register 0x85. Bits 7-6 => TS/GPIO ADC speed setting (25, 50, 100, 200 Hz) ((ilog2(x) / 25) << 6, same as AXP20X). Bits 5-4 => Vol/Cur ADC speed setting (100, 200, 400, 800 Hz) ((ilog2(x) / 100) << 4, same as AXP22X except the bit shift). Just set both to 100 or 200 by default (common rate). If someone wants to add a more specific rate setting, he could do it in the future. Setting a default is safer as we don't know if anything before the kernel does anything to this register. Thanks, Quentin > As it's not a necessary setup, allow it to be skipped, to allow simpler > AXP803 support now. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > --- > drivers/iio/adc/axp20x_adc.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c > index 11e177180ea0..93dd6b80059e 100644 > --- a/drivers/iio/adc/axp20x_adc.c > +++ b/drivers/iio/adc/axp20x_adc.c > @@ -556,8 +556,10 @@ static int axp20x_probe(struct platform_device *pdev) > AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK); > > /* Configure ADCs rate */ > - regmap_update_bits(info->regmap, AXP20X_ADC_RATE, AXP20X_ADC_RATE_MASK, > - info->data->adc_rate(100)); > + if (info->data->adc_rate) > + regmap_update_bits(info->regmap, AXP20X_ADC_RATE, > + AXP20X_ADC_RATE_MASK, > + info->data->adc_rate(100)); > > ret = iio_map_array_register(indio_dev, info->data->maps); > if (ret < 0) { >
diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c index 11e177180ea0..93dd6b80059e 100644 --- a/drivers/iio/adc/axp20x_adc.c +++ b/drivers/iio/adc/axp20x_adc.c @@ -556,8 +556,10 @@ static int axp20x_probe(struct platform_device *pdev) AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK); /* Configure ADCs rate */ - regmap_update_bits(info->regmap, AXP20X_ADC_RATE, AXP20X_ADC_RATE_MASK, - info->data->adc_rate(100)); + if (info->data->adc_rate) + regmap_update_bits(info->regmap, AXP20X_ADC_RATE, + AXP20X_ADC_RATE_MASK, + info->data->adc_rate(100)); ret = iio_map_array_register(indio_dev, info->data->maps); if (ret < 0) {
The ADC rate setup on AXP803 is more complex than AXP20x/22x. As it's not a necessary setup, allow it to be skipped, to allow simpler AXP803 support now. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- drivers/iio/adc/axp20x_adc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)