| Message ID | 20171123225906.31838-2-lorenzo.bianconi83@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, 23 Nov 2017 23:59:05 +0100 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote: > add support for STMicroelectronics UVIS25 uv sensor > http://www.st.com/resource/en/datasheet/uvis25.pdf > > - continuos mode support > - i2c support > - spi support > - trigger mode support > - system PM support > > Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> A couple of really trivial bits inline. I'll clean those up whilst applying... Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > drivers/iio/light/Kconfig | 24 +++ > drivers/iio/light/Makefile | 3 + > drivers/iio/light/st_uvis25.h | 37 ++++ > drivers/iio/light/st_uvis25_core.c | 360 +++++++++++++++++++++++++++++++++++++ > drivers/iio/light/st_uvis25_i2c.c | 69 +++++++ > drivers/iio/light/st_uvis25_spi.c | 68 +++++++ > 6 files changed, 561 insertions(+) > create mode 100644 drivers/iio/light/st_uvis25.h > create mode 100644 drivers/iio/light/st_uvis25_core.c > create mode 100644 drivers/iio/light/st_uvis25_i2c.c > create mode 100644 drivers/iio/light/st_uvis25_spi.c > > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig > index 6a5835fab32e..93fd421b10d7 100644 > --- a/drivers/iio/light/Kconfig > +++ b/drivers/iio/light/Kconfig > @@ -334,6 +334,30 @@ config STK3310 > Choosing M will build the driver as a module. If so, the module > will be called stk3310. > > +config ST_UVIS25 > + tristate "STMicroelectronics UVIS25 sensor driver" > + depends on (I2C || SPI) > + select IIO_BUFFER > + select IIO_TRIGGERED_BUFFER > + select ST_UVIS25_I2C if (I2C) > + select ST_UVIS25_SPI if (SPI_MASTER) > + help > + Say yes here to build support for STMicroelectronics UVIS25 > + uv sensor > + > + To compile this driver as a module, choose M here: the module > + will be called st_uvis25. > + > +config ST_UVIS25_I2C > + tristate > + depends on ST_UVIS25 > + select REGMAP_I2C > + > +config ST_UVIS25_SPI > + tristate > + depends on ST_UVIS25 > + select REGMAP_SPI > + > config TCS3414 > tristate "TAOS TCS3414 digital color sensor" > depends on I2C > diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile > index f0176a800e14..f714067a7816 100644 > --- a/drivers/iio/light/Makefile > +++ b/drivers/iio/light/Makefile > @@ -33,6 +33,9 @@ obj-$(CONFIG_RPR0521) += rpr0521.o > obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o > obj-$(CONFIG_SI1145) += si1145.o > obj-$(CONFIG_STK3310) += stk3310.o > +obj-$(CONFIG_ST_UVIS25) += st_uvis25_core.o > +obj-$(CONFIG_ST_UVIS25_I2C) += st_uvis25_i2c.o > +obj-$(CONFIG_ST_UVIS25_SPI) += st_uvis25_spi.o > obj-$(CONFIG_TCS3414) += tcs3414.o > obj-$(CONFIG_TCS3472) += tcs3472.o > obj-$(CONFIG_TSL2583) += tsl2583.o > diff --git a/drivers/iio/light/st_uvis25.h b/drivers/iio/light/st_uvis25.h > new file mode 100644 > index 000000000000..5e970ab480cd > --- /dev/null > +++ b/drivers/iio/light/st_uvis25.h > @@ -0,0 +1,37 @@ > +/* > + * STMicroelectronics uvis25 sensor driver > + * > + * Copyright 2017 STMicroelectronics Inc. > + * > + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> > + * > + * Licensed under the GPL-2. > + */ > + > +#ifndef ST_UVIS25_H > +#define ST_UVIS25_H > + > +#define ST_UVIS25_DEV_NAME "uvis25" > + > +#include <linux/iio/iio.h> > + > +/** > + * struct st_uvis25_hw - ST UVIS25 sensor instance > + * @regmap: Register map of the device. > + * @trig: The trigger in use by the driver. > + * @enabled: Status of the sensor (false->off, true->on). > + * @irq: Device interrupt line (I2C or SPI). > + */ > +struct st_uvis25_hw { > + struct regmap *regmap; > + > + struct iio_trigger *trig; > + bool enabled; > + int irq; > +}; > + > +extern const struct dev_pm_ops st_uvis25_pm_ops; > + > +int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap); > + > +#endif /* ST_UVIS25_H */ > diff --git a/drivers/iio/light/st_uvis25_core.c b/drivers/iio/light/st_uvis25_core.c > new file mode 100644 > index 000000000000..013da48df571 > --- /dev/null > +++ b/drivers/iio/light/st_uvis25_core.c > @@ -0,0 +1,360 @@ > +/* > + * STMicroelectronics uvis25 sensor driver > + * > + * Copyright 2017 STMicroelectronics Inc. > + * > + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> > + * > + * Licensed under the GPL-2. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/device.h> > +#include <linux/iio/sysfs.h> > +#include <linux/delay.h> > +#include <linux/pm.h> > +#include <linux/interrupt.h> > +#include <linux/irqreturn.h> > +#include <linux/iio/trigger.h> > +#include <linux/iio/trigger_consumer.h> > +#include <linux/iio/triggered_buffer.h> > +#include <linux/iio/buffer.h> > +#include <linux/regmap.h> > + > +#include "st_uvis25.h" > + > +#define ST_UVIS25_REG_WHOAMI_ADDR 0x0f > +#define ST_UVIS25_REG_WHOAMI_VAL 0xca > +#define ST_UVIS25_REG_CTRL1_ADDR 0x20 > +#define ST_UVIS25_REG_ODR_MASK BIT(0) > +#define ST_UVIS25_REG_BDU_MASK BIT(1) > +#define ST_UVIS25_REG_CTRL2_ADDR 0x21 > +#define ST_UVIS25_REG_BOOT_MASK BIT(7) > +#define ST_UVIS25_REG_CTRL3_ADDR 0x22 > +#define ST_UVIS25_REG_HL_MASK BIT(7) > +#define ST_UVIS25_REG_STATUS_ADDR 0x27 > +#define ST_UVIS25_REG_UV_DA_MASK BIT(0) > +#define ST_UVIS25_REG_OUT_ADDR 0x28 > + > +static const struct iio_chan_spec st_uvis25_channels[] = { > + { > + .type = IIO_UVINDEX, > + .address = ST_UVIS25_REG_OUT_ADDR, > + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), > + .scan_index = 0, > + .scan_type = { > + .sign = 'u', > + .realbits = 8, > + .storagebits = 8, > + }, > + }, > + IIO_CHAN_SOFT_TIMESTAMP(1), > +}; > + > +static int st_uvis25_check_whoami(struct st_uvis25_hw *hw) > +{ > + int err, data; > + > + err = regmap_read(hw->regmap, ST_UVIS25_REG_WHOAMI_ADDR, &data); > + if (err < 0) { > + dev_err(regmap_get_device(hw->regmap), > + "failed to read whoami register\n"); > + return err; > + } > + > + if (data != ST_UVIS25_REG_WHOAMI_VAL) { > + dev_err(regmap_get_device(hw->regmap), > + "wrong whoami {%02x vs %02x}\n", > + data, ST_UVIS25_REG_WHOAMI_VAL); > + return -ENODEV; > + } > + > + return 0; > +} > + > +static int st_uvis25_set_enable(struct st_uvis25_hw *hw, bool enable) > +{ > + int err; > + > + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, > + ST_UVIS25_REG_ODR_MASK, enable); > + if (err < 0) > + return err; > + > + hw->enabled = enable; > + > + return 0; > +} > + > +static int st_uvis25_read_oneshot(struct st_uvis25_hw *hw, u8 addr, int *val) > +{ > + int err; > + > + err = st_uvis25_set_enable(hw, true); > + if (err < 0) > + return err; > + > + msleep(1500); > + > + /* > + * in order to avoid possible race conditions with interrupt > + * generation, disable the sensor first and then poll output > + * register. That sequence guarantees the interrupt will be reset > + * when irq line is unmasked > + */ > + err = st_uvis25_set_enable(hw, false); > + if (err < 0) > + return err; > + > + err = regmap_read(hw->regmap, addr, val); > + > + return err < 0 ? err : IIO_VAL_INT; > +} > + > +static int st_uvis25_read_raw(struct iio_dev *iio_dev, > + struct iio_chan_spec const *ch, > + int *val, int *val2, long mask) > +{ > + int ret; > + > + ret = iio_device_claim_direct_mode(iio_dev); > + if (ret) > + return ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_PROCESSED: { > + struct st_uvis25_hw *hw = iio_priv(iio_dev); > + > + /* > + * mask irq line during oneshot read since the sensor > + * does not export the capability to disable data-ready line > + * in the register map and it is enabled by default. > + * If the line is unmasked during read_raw() it will be set > + * active and never reset since the trigger is disabled > + */ > + if (hw->irq > 0) > + disable_irq(hw->irq); > + ret = st_uvis25_read_oneshot(hw, ch->address, val); > + if (hw->irq > 0) > + enable_irq(hw->irq); > + break; > + } > + default: > + ret = -EINVAL; > + break; > + } > + > + iio_device_release_direct_mode(iio_dev); > + > + return ret; > +} > + > +static irqreturn_t st_uvis25_trigger_handler_thread(int irq, void *private) > +{ > + struct st_uvis25_hw *hw = private; > + int err, status; > + > + err = regmap_read(hw->regmap, ST_UVIS25_REG_STATUS_ADDR, &status); > + if (err < 0) > + return IRQ_HANDLED; > + > + if (!(status & ST_UVIS25_REG_UV_DA_MASK)) > + return IRQ_NONE; > + > + iio_trigger_poll_chained(hw->trig); > + > + return IRQ_HANDLED; > +} > + > +static int st_uvis25_allocate_trigger(struct iio_dev *iio_dev) > +{ > + struct st_uvis25_hw *hw = iio_priv(iio_dev); > + struct device *dev = regmap_get_device(hw->regmap); > + bool irq_active_low = false; > + unsigned long irq_type; > + int err; > + > + irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq)); > + > + switch (irq_type) { > + case IRQF_TRIGGER_HIGH: > + case IRQF_TRIGGER_RISING: > + break; > + case IRQF_TRIGGER_LOW: > + case IRQF_TRIGGER_FALLING: > + irq_active_low = true; > + break; > + default: > + dev_info(dev, "mode %lx unsupported\n", irq_type); > + return -EINVAL; > + } > + > + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL3_ADDR, > + ST_UVIS25_REG_HL_MASK, irq_active_low); > + if (err < 0) > + return err; > + > + err = devm_request_threaded_irq(dev, hw->irq, NULL, > + st_uvis25_trigger_handler_thread, > + irq_type | IRQF_ONESHOT, > + iio_dev->name, hw); > + if (err) { > + dev_err(dev, "failed to request trigger irq %d\n", > + hw->irq); > + return err; > + } > + > + hw->trig = devm_iio_trigger_alloc(dev, "%s-trigger", > + iio_dev->name); > + if (!hw->trig) > + return -ENOMEM; > + > + iio_trigger_set_drvdata(hw->trig, iio_dev); > + hw->trig->dev.parent = dev; > + > + return devm_iio_trigger_register(dev, hw->trig); > +} > + > +static int st_uvis25_buffer_preenable(struct iio_dev *iio_dev) > +{ > + return st_uvis25_set_enable(iio_priv(iio_dev), true); > +} > + > +static int st_uvis25_buffer_postdisable(struct iio_dev *iio_dev) > +{ > + return st_uvis25_set_enable(iio_priv(iio_dev), false); > +} > + > +static const struct iio_buffer_setup_ops st_uvis25_buffer_ops = { > + .preenable = st_uvis25_buffer_preenable, > + .postenable = iio_triggered_buffer_postenable, > + .predisable = iio_triggered_buffer_predisable, > + .postdisable = st_uvis25_buffer_postdisable, > +}; > + > +static irqreturn_t st_uvis25_buffer_handler_thread(int irq, void *p) > +{ > + u8 buffer[ALIGN(sizeof(u8), sizeof(s64)) + sizeof(s64)]; I thought we were going to run into dma safe buffer issues but I see regmap-spi.c uses spi_write_then_read which uses bounce buffers so we are fine. > + struct iio_poll_func *pf = p; > + struct iio_dev *iio_dev = pf->indio_dev; > + struct st_uvis25_hw *hw = iio_priv(iio_dev); > + int err; > + > + err = regmap_read(hw->regmap, ST_UVIS25_REG_OUT_ADDR, (int *)buffer); > + if (err < 0) > + goto out; > + > + iio_push_to_buffers_with_timestamp(iio_dev, buffer, > + iio_get_time_ns(iio_dev)); > + > +out: > + iio_trigger_notify_done(hw->trig); > + > + return IRQ_HANDLED; > +} > + > +static int st_uvis25_allocate_buffer(struct iio_dev *iio_dev) > +{ > + struct st_uvis25_hw *hw = iio_priv(iio_dev); > + > + return devm_iio_triggered_buffer_setup(regmap_get_device(hw->regmap), > + iio_dev, NULL, > + st_uvis25_buffer_handler_thread, > + &st_uvis25_buffer_ops); > +} > + > +static const struct iio_info st_uvis25_info = { > + .read_raw = st_uvis25_read_raw, > +}; > + > +static int st_uvis25_init_sensor(struct st_uvis25_hw *hw) > +{ > + int err; > + > + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL2_ADDR, > + ST_UVIS25_REG_BOOT_MASK, 1); > + if (err < 0) > + return err; > + > + msleep(2000); > + > + return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, > + ST_UVIS25_REG_BDU_MASK, 1); > +} > + > +int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap) > +{ > + struct st_uvis25_hw *hw; > + struct iio_dev *iio_dev; > + int err; > + > + iio_dev = devm_iio_device_alloc(dev, sizeof(*hw)); > + if (!iio_dev) > + return -ENOMEM; > + > + dev_set_drvdata(dev, (void *)iio_dev); Never any need to cast to a (void *) as it is always fine for any pointer type to do this implicitly (it's in the C spec somewhere...) > + > + hw = iio_priv(iio_dev); > + hw->irq = irq; > + hw->regmap = regmap; > + > + err = st_uvis25_check_whoami(hw); > + if (err < 0) > + return err; > + > + iio_dev->modes = INDIO_DIRECT_MODE; > + iio_dev->dev.parent = dev; > + iio_dev->channels = st_uvis25_channels; > + iio_dev->num_channels = ARRAY_SIZE(st_uvis25_channels); > + iio_dev->name = ST_UVIS25_DEV_NAME; > + iio_dev->info = &st_uvis25_info; > + > + err = st_uvis25_init_sensor(hw); > + if (err < 0) > + return err; > + > + if (hw->irq > 0) { > + err = st_uvis25_allocate_buffer(iio_dev); > + if (err < 0) > + return err; > + > + err = st_uvis25_allocate_trigger(iio_dev); > + if (err) > + return err; > + } > + > + return devm_iio_device_register(dev, iio_dev); > +} > +EXPORT_SYMBOL(st_uvis25_probe); > + > +static int __maybe_unused st_uvis25_suspend(struct device *dev) > +{ > + struct iio_dev *iio_dev = dev_get_drvdata(dev); > + struct st_uvis25_hw *hw = iio_priv(iio_dev); > + > + return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, > + ST_UVIS25_REG_ODR_MASK, 0); > +} > + > +static int __maybe_unused st_uvis25_resume(struct device *dev) > +{ > + struct iio_dev *iio_dev = dev_get_drvdata(dev); > + struct st_uvis25_hw *hw = iio_priv(iio_dev); > + int err = 0; > + > + if (hw->enabled) > + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, > + ST_UVIS25_REG_ODR_MASK, 1); if (hw->enabled) return regmap_... return 0; > + > + return err; > +} > + > +const struct dev_pm_ops st_uvis25_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(st_uvis25_suspend, st_uvis25_resume) > +}; > +EXPORT_SYMBOL(st_uvis25_pm_ops); > + > +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); > +MODULE_DESCRIPTION("STMicroelectronics uvis25 sensor driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c > new file mode 100644 > index 000000000000..e49ec46e9bb8 > --- /dev/null > +++ b/drivers/iio/light/st_uvis25_i2c.c > @@ -0,0 +1,69 @@ > +/* > + * STMicroelectronics uvis25 i2c driver > + * > + * Copyright 2017 STMicroelectronics Inc. > + * > + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> > + * > + * Licensed under the GPL-2. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/acpi.h> > +#include <linux/i2c.h> > +#include <linux/slab.h> > +#include <linux/regmap.h> > + > +#include "st_uvis25.h" > + > +#define I2C_AUTO_INCREMENT BIT(7) Hmm. I think the chances of that clashing with something defined in the future is a little too high. Needs a prefix to avoid possible issues... > + > +const struct regmap_config st_uvis25_i2c_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .write_flag_mask = I2C_AUTO_INCREMENT, > + .read_flag_mask = I2C_AUTO_INCREMENT, > +}; > + > +static int st_uvis25_i2c_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct regmap *regmap; > + > + regmap = devm_regmap_init_i2c(client, &st_uvis25_i2c_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&client->dev, "Failed to register i2c regmap %d\n", > + (int)PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + return st_uvis25_probe(&client->dev, client->irq, regmap); > +} > + > +static const struct of_device_id st_uvis25_i2c_of_match[] = { > + { .compatible = "st,uvis25", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, st_uvis25_i2c_of_match); > + > +static const struct i2c_device_id st_uvis25_i2c_id_table[] = { > + { ST_UVIS25_DEV_NAME }, > + {}, > +}; > +MODULE_DEVICE_TABLE(i2c, st_uvis25_i2c_id_table); > + > +static struct i2c_driver st_uvis25_driver = { > + .driver = { > + .name = "st_uvis25_i2c", > + .pm = &st_uvis25_pm_ops, > + .of_match_table = of_match_ptr(st_uvis25_i2c_of_match), > + }, > + .probe = st_uvis25_i2c_probe, > + .id_table = st_uvis25_i2c_id_table, > +}; > +module_i2c_driver(st_uvis25_driver); > + > +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); > +MODULE_DESCRIPTION("STMicroelectronics uvis25 i2c driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/light/st_uvis25_spi.c b/drivers/iio/light/st_uvis25_spi.c > new file mode 100644 > index 000000000000..06e9f7cbe1e7 > --- /dev/null > +++ b/drivers/iio/light/st_uvis25_spi.c > @@ -0,0 +1,68 @@ > +/* > + * STMicroelectronics uvis25 spi driver > + * > + * Copyright 2017 STMicroelectronics Inc. > + * > + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> > + * > + * Licensed under the GPL-2. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/spi/spi.h> > +#include <linux/slab.h> > +#include <linux/regmap.h> > + > +#include "st_uvis25.h" > + > +#define SENSORS_SPI_READ BIT(7) > +#define SPI_AUTO_INCREMENT BIT(6) > + > +const struct regmap_config st_uvis25_spi_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + .read_flag_mask = SENSORS_SPI_READ | SPI_AUTO_INCREMENT, > + .write_flag_mask = SPI_AUTO_INCREMENT, > +}; > + > +static int st_uvis25_spi_probe(struct spi_device *spi) > +{ > + struct regmap *regmap; > + > + regmap = devm_regmap_init_spi(spi, &st_uvis25_spi_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&spi->dev, "Failed to register spi regmap %d\n", > + (int)PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + return st_uvis25_probe(&spi->dev, spi->irq, regmap); > +} > + > +static const struct of_device_id st_uvis25_spi_of_match[] = { > + { .compatible = "st,uvis25", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, st_uvis25_spi_of_match); > + > +static const struct spi_device_id st_uvis25_spi_id_table[] = { > + { ST_UVIS25_DEV_NAME }, > + {}, > +}; > +MODULE_DEVICE_TABLE(spi, st_uvis25_spi_id_table); > + > +static struct spi_driver st_uvis25_driver = { > + .driver = { > + .name = "st_uvis25_spi", > + .pm = &st_uvis25_pm_ops, > + .of_match_table = of_match_ptr(st_uvis25_spi_of_match), > + }, > + .probe = st_uvis25_spi_probe, > + .id_table = st_uvis25_spi_id_table, > +}; > +module_spi_driver(st_uvis25_driver); > + > +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); > +MODULE_DESCRIPTION("STMicroelectronics uvis25 spi driver"); > +MODULE_LICENSE("GPL v2"); -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> On Thu, 23 Nov 2017 23:59:05 +0100 > Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote: > >> add support for STMicroelectronics UVIS25 uv sensor >> http://www.st.com/resource/en/datasheet/uvis25.pdf >> >> - continuos mode support >> - i2c support >> - spi support >> - trigger mode support >> - system PM support >> >> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> > A couple of really trivial bits inline. I'll clean those up whilst > applying... > > Applied to the togreg branch of iio.git and pushed out as testing > for the autobuilders to play with it. > > Thanks, > > Jonathan > >> --- >> drivers/iio/light/Kconfig | 24 +++ >> drivers/iio/light/Makefile | 3 + >> drivers/iio/light/st_uvis25.h | 37 ++++ >> drivers/iio/light/st_uvis25_core.c | 360 +++++++++++++++++++++++++++++++++++++ >> drivers/iio/light/st_uvis25_i2c.c | 69 +++++++ >> drivers/iio/light/st_uvis25_spi.c | 68 +++++++ >> 6 files changed, 561 insertions(+) >> create mode 100644 drivers/iio/light/st_uvis25.h >> create mode 100644 drivers/iio/light/st_uvis25_core.c >> create mode 100644 drivers/iio/light/st_uvis25_i2c.c >> create mode 100644 drivers/iio/light/st_uvis25_spi.c >> >> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig >> index 6a5835fab32e..93fd421b10d7 100644 >> --- a/drivers/iio/light/Kconfig >> +++ b/drivers/iio/light/Kconfig >> @@ -334,6 +334,30 @@ config STK3310 >> Choosing M will build the driver as a module. If so, the module >> will be called stk3310. >> >> +config ST_UVIS25 >> + tristate "STMicroelectronics UVIS25 sensor driver" >> + depends on (I2C || SPI) >> + select IIO_BUFFER >> + select IIO_TRIGGERED_BUFFER >> + select ST_UVIS25_I2C if (I2C) >> + select ST_UVIS25_SPI if (SPI_MASTER) >> + help >> + Say yes here to build support for STMicroelectronics UVIS25 >> + uv sensor >> + >> + To compile this driver as a module, choose M here: the module >> + will be called st_uvis25. >> + >> +config ST_UVIS25_I2C >> + tristate >> + depends on ST_UVIS25 >> + select REGMAP_I2C >> + >> +config ST_UVIS25_SPI >> + tristate >> + depends on ST_UVIS25 >> + select REGMAP_SPI >> + >> config TCS3414 >> tristate "TAOS TCS3414 digital color sensor" >> depends on I2C >> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile >> index f0176a800e14..f714067a7816 100644 >> --- a/drivers/iio/light/Makefile >> +++ b/drivers/iio/light/Makefile >> @@ -33,6 +33,9 @@ obj-$(CONFIG_RPR0521) += rpr0521.o >> obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o >> obj-$(CONFIG_SI1145) += si1145.o >> obj-$(CONFIG_STK3310) += stk3310.o >> +obj-$(CONFIG_ST_UVIS25) += st_uvis25_core.o >> +obj-$(CONFIG_ST_UVIS25_I2C) += st_uvis25_i2c.o >> +obj-$(CONFIG_ST_UVIS25_SPI) += st_uvis25_spi.o >> obj-$(CONFIG_TCS3414) += tcs3414.o >> obj-$(CONFIG_TCS3472) += tcs3472.o >> obj-$(CONFIG_TSL2583) += tsl2583.o >> diff --git a/drivers/iio/light/st_uvis25.h b/drivers/iio/light/st_uvis25.h >> new file mode 100644 >> index 000000000000..5e970ab480cd >> --- /dev/null >> +++ b/drivers/iio/light/st_uvis25.h >> @@ -0,0 +1,37 @@ >> +/* >> + * STMicroelectronics uvis25 sensor driver >> + * >> + * Copyright 2017 STMicroelectronics Inc. >> + * >> + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> >> + * >> + * Licensed under the GPL-2. >> + */ >> + >> +#ifndef ST_UVIS25_H >> +#define ST_UVIS25_H >> + >> +#define ST_UVIS25_DEV_NAME "uvis25" >> + >> +#include <linux/iio/iio.h> >> + >> +/** >> + * struct st_uvis25_hw - ST UVIS25 sensor instance >> + * @regmap: Register map of the device. >> + * @trig: The trigger in use by the driver. >> + * @enabled: Status of the sensor (false->off, true->on). >> + * @irq: Device interrupt line (I2C or SPI). >> + */ >> +struct st_uvis25_hw { >> + struct regmap *regmap; >> + >> + struct iio_trigger *trig; >> + bool enabled; >> + int irq; >> +}; >> + >> +extern const struct dev_pm_ops st_uvis25_pm_ops; >> + >> +int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap); >> + >> +#endif /* ST_UVIS25_H */ >> diff --git a/drivers/iio/light/st_uvis25_core.c b/drivers/iio/light/st_uvis25_core.c >> new file mode 100644 >> index 000000000000..013da48df571 >> --- /dev/null >> +++ b/drivers/iio/light/st_uvis25_core.c >> @@ -0,0 +1,360 @@ >> +/* >> + * STMicroelectronics uvis25 sensor driver >> + * >> + * Copyright 2017 STMicroelectronics Inc. >> + * >> + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> >> + * >> + * Licensed under the GPL-2. >> + */ >> + >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/device.h> >> +#include <linux/iio/sysfs.h> >> +#include <linux/delay.h> >> +#include <linux/pm.h> >> +#include <linux/interrupt.h> >> +#include <linux/irqreturn.h> >> +#include <linux/iio/trigger.h> >> +#include <linux/iio/trigger_consumer.h> >> +#include <linux/iio/triggered_buffer.h> >> +#include <linux/iio/buffer.h> >> +#include <linux/regmap.h> >> + >> +#include "st_uvis25.h" >> + >> +#define ST_UVIS25_REG_WHOAMI_ADDR 0x0f >> +#define ST_UVIS25_REG_WHOAMI_VAL 0xca >> +#define ST_UVIS25_REG_CTRL1_ADDR 0x20 >> +#define ST_UVIS25_REG_ODR_MASK BIT(0) >> +#define ST_UVIS25_REG_BDU_MASK BIT(1) >> +#define ST_UVIS25_REG_CTRL2_ADDR 0x21 >> +#define ST_UVIS25_REG_BOOT_MASK BIT(7) >> +#define ST_UVIS25_REG_CTRL3_ADDR 0x22 >> +#define ST_UVIS25_REG_HL_MASK BIT(7) >> +#define ST_UVIS25_REG_STATUS_ADDR 0x27 >> +#define ST_UVIS25_REG_UV_DA_MASK BIT(0) >> +#define ST_UVIS25_REG_OUT_ADDR 0x28 >> + >> +static const struct iio_chan_spec st_uvis25_channels[] = { >> + { >> + .type = IIO_UVINDEX, >> + .address = ST_UVIS25_REG_OUT_ADDR, >> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), >> + .scan_index = 0, >> + .scan_type = { >> + .sign = 'u', >> + .realbits = 8, >> + .storagebits = 8, >> + }, >> + }, >> + IIO_CHAN_SOFT_TIMESTAMP(1), >> +}; >> + >> +static int st_uvis25_check_whoami(struct st_uvis25_hw *hw) >> +{ >> + int err, data; >> + >> + err = regmap_read(hw->regmap, ST_UVIS25_REG_WHOAMI_ADDR, &data); >> + if (err < 0) { >> + dev_err(regmap_get_device(hw->regmap), >> + "failed to read whoami register\n"); >> + return err; >> + } >> + >> + if (data != ST_UVIS25_REG_WHOAMI_VAL) { >> + dev_err(regmap_get_device(hw->regmap), >> + "wrong whoami {%02x vs %02x}\n", >> + data, ST_UVIS25_REG_WHOAMI_VAL); >> + return -ENODEV; >> + } >> + >> + return 0; >> +} >> + >> +static int st_uvis25_set_enable(struct st_uvis25_hw *hw, bool enable) >> +{ >> + int err; >> + >> + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, >> + ST_UVIS25_REG_ODR_MASK, enable); >> + if (err < 0) >> + return err; >> + >> + hw->enabled = enable; >> + >> + return 0; >> +} >> + >> +static int st_uvis25_read_oneshot(struct st_uvis25_hw *hw, u8 addr, int *val) >> +{ >> + int err; >> + >> + err = st_uvis25_set_enable(hw, true); >> + if (err < 0) >> + return err; >> + >> + msleep(1500); >> + >> + /* >> + * in order to avoid possible race conditions with interrupt >> + * generation, disable the sensor first and then poll output >> + * register. That sequence guarantees the interrupt will be reset >> + * when irq line is unmasked >> + */ >> + err = st_uvis25_set_enable(hw, false); >> + if (err < 0) >> + return err; >> + >> + err = regmap_read(hw->regmap, addr, val); >> + >> + return err < 0 ? err : IIO_VAL_INT; >> +} >> + >> +static int st_uvis25_read_raw(struct iio_dev *iio_dev, >> + struct iio_chan_spec const *ch, >> + int *val, int *val2, long mask) >> +{ >> + int ret; >> + >> + ret = iio_device_claim_direct_mode(iio_dev); >> + if (ret) >> + return ret; >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_PROCESSED: { >> + struct st_uvis25_hw *hw = iio_priv(iio_dev); >> + >> + /* >> + * mask irq line during oneshot read since the sensor >> + * does not export the capability to disable data-ready line >> + * in the register map and it is enabled by default. >> + * If the line is unmasked during read_raw() it will be set >> + * active and never reset since the trigger is disabled >> + */ >> + if (hw->irq > 0) >> + disable_irq(hw->irq); >> + ret = st_uvis25_read_oneshot(hw, ch->address, val); >> + if (hw->irq > 0) >> + enable_irq(hw->irq); >> + break; >> + } >> + default: >> + ret = -EINVAL; >> + break; >> + } >> + >> + iio_device_release_direct_mode(iio_dev); >> + >> + return ret; >> +} >> + >> +static irqreturn_t st_uvis25_trigger_handler_thread(int irq, void *private) >> +{ >> + struct st_uvis25_hw *hw = private; >> + int err, status; >> + >> + err = regmap_read(hw->regmap, ST_UVIS25_REG_STATUS_ADDR, &status); >> + if (err < 0) >> + return IRQ_HANDLED; >> + >> + if (!(status & ST_UVIS25_REG_UV_DA_MASK)) >> + return IRQ_NONE; >> + >> + iio_trigger_poll_chained(hw->trig); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static int st_uvis25_allocate_trigger(struct iio_dev *iio_dev) >> +{ >> + struct st_uvis25_hw *hw = iio_priv(iio_dev); >> + struct device *dev = regmap_get_device(hw->regmap); >> + bool irq_active_low = false; >> + unsigned long irq_type; >> + int err; >> + >> + irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq)); >> + >> + switch (irq_type) { >> + case IRQF_TRIGGER_HIGH: >> + case IRQF_TRIGGER_RISING: >> + break; >> + case IRQF_TRIGGER_LOW: >> + case IRQF_TRIGGER_FALLING: >> + irq_active_low = true; >> + break; >> + default: >> + dev_info(dev, "mode %lx unsupported\n", irq_type); >> + return -EINVAL; >> + } >> + >> + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL3_ADDR, >> + ST_UVIS25_REG_HL_MASK, irq_active_low); >> + if (err < 0) >> + return err; >> + >> + err = devm_request_threaded_irq(dev, hw->irq, NULL, >> + st_uvis25_trigger_handler_thread, >> + irq_type | IRQF_ONESHOT, >> + iio_dev->name, hw); >> + if (err) { >> + dev_err(dev, "failed to request trigger irq %d\n", >> + hw->irq); >> + return err; >> + } >> + >> + hw->trig = devm_iio_trigger_alloc(dev, "%s-trigger", >> + iio_dev->name); >> + if (!hw->trig) >> + return -ENOMEM; >> + >> + iio_trigger_set_drvdata(hw->trig, iio_dev); >> + hw->trig->dev.parent = dev; >> + >> + return devm_iio_trigger_register(dev, hw->trig); >> +} >> + >> +static int st_uvis25_buffer_preenable(struct iio_dev *iio_dev) >> +{ >> + return st_uvis25_set_enable(iio_priv(iio_dev), true); >> +} >> + >> +static int st_uvis25_buffer_postdisable(struct iio_dev *iio_dev) >> +{ >> + return st_uvis25_set_enable(iio_priv(iio_dev), false); >> +} >> + >> +static const struct iio_buffer_setup_ops st_uvis25_buffer_ops = { >> + .preenable = st_uvis25_buffer_preenable, >> + .postenable = iio_triggered_buffer_postenable, >> + .predisable = iio_triggered_buffer_predisable, >> + .postdisable = st_uvis25_buffer_postdisable, >> +}; >> + >> +static irqreturn_t st_uvis25_buffer_handler_thread(int irq, void *p) >> +{ >> + u8 buffer[ALIGN(sizeof(u8), sizeof(s64)) + sizeof(s64)]; > > I thought we were going to run into dma safe buffer issues but > I see regmap-spi.c uses spi_write_then_read which uses bounce > buffers so we are fine. > Very good hint, thanks :) Regards, Lorenzo > >> + struct iio_poll_func *pf = p; >> + struct iio_dev *iio_dev = pf->indio_dev; >> + struct st_uvis25_hw *hw = iio_priv(iio_dev); >> + int err; >> + >> + err = regmap_read(hw->regmap, ST_UVIS25_REG_OUT_ADDR, (int *)buffer); >> + if (err < 0) >> + goto out; >> + >> + iio_push_to_buffers_with_timestamp(iio_dev, buffer, >> + iio_get_time_ns(iio_dev)); >> + >> +out: >> + iio_trigger_notify_done(hw->trig); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static int st_uvis25_allocate_buffer(struct iio_dev *iio_dev) >> +{ >> + struct st_uvis25_hw *hw = iio_priv(iio_dev); >> + >> + return devm_iio_triggered_buffer_setup(regmap_get_device(hw->regmap), >> + iio_dev, NULL, >> + st_uvis25_buffer_handler_thread, >> + &st_uvis25_buffer_ops); >> +} >> + >> +static const struct iio_info st_uvis25_info = { >> + .read_raw = st_uvis25_read_raw, >> +}; >> + >> +static int st_uvis25_init_sensor(struct st_uvis25_hw *hw) >> +{ >> + int err; >> + >> + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL2_ADDR, >> + ST_UVIS25_REG_BOOT_MASK, 1); >> + if (err < 0) >> + return err; >> + >> + msleep(2000); >> + >> + return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, >> + ST_UVIS25_REG_BDU_MASK, 1); >> +} >> + >> +int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap) >> +{ >> + struct st_uvis25_hw *hw; >> + struct iio_dev *iio_dev; >> + int err; >> + >> + iio_dev = devm_iio_device_alloc(dev, sizeof(*hw)); >> + if (!iio_dev) >> + return -ENOMEM; >> + >> + dev_set_drvdata(dev, (void *)iio_dev); > > Never any need to cast to a (void *) as it is always fine for any pointer > type to do this implicitly (it's in the C spec somewhere...) > >> + >> + hw = iio_priv(iio_dev); >> + hw->irq = irq; >> + hw->regmap = regmap; >> + >> + err = st_uvis25_check_whoami(hw); >> + if (err < 0) >> + return err; >> + >> + iio_dev->modes = INDIO_DIRECT_MODE; >> + iio_dev->dev.parent = dev; >> + iio_dev->channels = st_uvis25_channels; >> + iio_dev->num_channels = ARRAY_SIZE(st_uvis25_channels); >> + iio_dev->name = ST_UVIS25_DEV_NAME; >> + iio_dev->info = &st_uvis25_info; >> + >> + err = st_uvis25_init_sensor(hw); >> + if (err < 0) >> + return err; >> + >> + if (hw->irq > 0) { >> + err = st_uvis25_allocate_buffer(iio_dev); >> + if (err < 0) >> + return err; >> + >> + err = st_uvis25_allocate_trigger(iio_dev); >> + if (err) >> + return err; >> + } >> + >> + return devm_iio_device_register(dev, iio_dev); >> +} >> +EXPORT_SYMBOL(st_uvis25_probe); >> + >> +static int __maybe_unused st_uvis25_suspend(struct device *dev) >> +{ >> + struct iio_dev *iio_dev = dev_get_drvdata(dev); >> + struct st_uvis25_hw *hw = iio_priv(iio_dev); >> + >> + return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, >> + ST_UVIS25_REG_ODR_MASK, 0); >> +} >> + >> +static int __maybe_unused st_uvis25_resume(struct device *dev) >> +{ >> + struct iio_dev *iio_dev = dev_get_drvdata(dev); >> + struct st_uvis25_hw *hw = iio_priv(iio_dev); >> + int err = 0; >> + >> + if (hw->enabled) >> + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, >> + ST_UVIS25_REG_ODR_MASK, 1); > if (hw->enabled) > return regmap_... > > return 0; >> + >> + return err; >> +} >> + >> +const struct dev_pm_ops st_uvis25_pm_ops = { >> + SET_SYSTEM_SLEEP_PM_OPS(st_uvis25_suspend, st_uvis25_resume) >> +}; >> +EXPORT_SYMBOL(st_uvis25_pm_ops); >> + >> +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); >> +MODULE_DESCRIPTION("STMicroelectronics uvis25 sensor driver"); >> +MODULE_LICENSE("GPL v2"); >> diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c >> new file mode 100644 >> index 000000000000..e49ec46e9bb8 >> --- /dev/null >> +++ b/drivers/iio/light/st_uvis25_i2c.c >> @@ -0,0 +1,69 @@ >> +/* >> + * STMicroelectronics uvis25 i2c driver >> + * >> + * Copyright 2017 STMicroelectronics Inc. >> + * >> + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> >> + * >> + * Licensed under the GPL-2. >> + */ >> + >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/acpi.h> >> +#include <linux/i2c.h> >> +#include <linux/slab.h> >> +#include <linux/regmap.h> >> + >> +#include "st_uvis25.h" >> + >> +#define I2C_AUTO_INCREMENT BIT(7) > Hmm. I think the chances of that clashing with > something defined in the future is a little too high. > > Needs a prefix to avoid possible issues... > >> + >> +const struct regmap_config st_uvis25_i2c_regmap_config = { >> + .reg_bits = 8, >> + .val_bits = 8, >> + .write_flag_mask = I2C_AUTO_INCREMENT, >> + .read_flag_mask = I2C_AUTO_INCREMENT, >> +}; >> + >> +static int st_uvis25_i2c_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + struct regmap *regmap; >> + >> + regmap = devm_regmap_init_i2c(client, &st_uvis25_i2c_regmap_config); >> + if (IS_ERR(regmap)) { >> + dev_err(&client->dev, "Failed to register i2c regmap %d\n", >> + (int)PTR_ERR(regmap)); >> + return PTR_ERR(regmap); >> + } >> + >> + return st_uvis25_probe(&client->dev, client->irq, regmap); >> +} >> + >> +static const struct of_device_id st_uvis25_i2c_of_match[] = { >> + { .compatible = "st,uvis25", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, st_uvis25_i2c_of_match); >> + >> +static const struct i2c_device_id st_uvis25_i2c_id_table[] = { >> + { ST_UVIS25_DEV_NAME }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(i2c, st_uvis25_i2c_id_table); >> + >> +static struct i2c_driver st_uvis25_driver = { >> + .driver = { >> + .name = "st_uvis25_i2c", >> + .pm = &st_uvis25_pm_ops, >> + .of_match_table = of_match_ptr(st_uvis25_i2c_of_match), >> + }, >> + .probe = st_uvis25_i2c_probe, >> + .id_table = st_uvis25_i2c_id_table, >> +}; >> +module_i2c_driver(st_uvis25_driver); >> + >> +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); >> +MODULE_DESCRIPTION("STMicroelectronics uvis25 i2c driver"); >> +MODULE_LICENSE("GPL v2"); >> diff --git a/drivers/iio/light/st_uvis25_spi.c b/drivers/iio/light/st_uvis25_spi.c >> new file mode 100644 >> index 000000000000..06e9f7cbe1e7 >> --- /dev/null >> +++ b/drivers/iio/light/st_uvis25_spi.c >> @@ -0,0 +1,68 @@ >> +/* >> + * STMicroelectronics uvis25 spi driver >> + * >> + * Copyright 2017 STMicroelectronics Inc. >> + * >> + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> >> + * >> + * Licensed under the GPL-2. >> + */ >> + >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/spi/spi.h> >> +#include <linux/slab.h> >> +#include <linux/regmap.h> >> + >> +#include "st_uvis25.h" >> + >> +#define SENSORS_SPI_READ BIT(7) >> +#define SPI_AUTO_INCREMENT BIT(6) >> + >> +const struct regmap_config st_uvis25_spi_regmap_config = { >> + .reg_bits = 8, >> + .val_bits = 8, >> + .read_flag_mask = SENSORS_SPI_READ | SPI_AUTO_INCREMENT, >> + .write_flag_mask = SPI_AUTO_INCREMENT, >> +}; >> + >> +static int st_uvis25_spi_probe(struct spi_device *spi) >> +{ >> + struct regmap *regmap; >> + >> + regmap = devm_regmap_init_spi(spi, &st_uvis25_spi_regmap_config); >> + if (IS_ERR(regmap)) { >> + dev_err(&spi->dev, "Failed to register spi regmap %d\n", >> + (int)PTR_ERR(regmap)); >> + return PTR_ERR(regmap); >> + } >> + >> + return st_uvis25_probe(&spi->dev, spi->irq, regmap); >> +} >> + >> +static const struct of_device_id st_uvis25_spi_of_match[] = { >> + { .compatible = "st,uvis25", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, st_uvis25_spi_of_match); >> + >> +static const struct spi_device_id st_uvis25_spi_id_table[] = { >> + { ST_UVIS25_DEV_NAME }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(spi, st_uvis25_spi_id_table); >> + >> +static struct spi_driver st_uvis25_driver = { >> + .driver = { >> + .name = "st_uvis25_spi", >> + .pm = &st_uvis25_pm_ops, >> + .of_match_table = of_match_ptr(st_uvis25_spi_of_match), >> + }, >> + .probe = st_uvis25_spi_probe, >> + .id_table = st_uvis25_spi_id_table, >> +}; >> +module_spi_driver(st_uvis25_driver); >> + >> +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); >> +MODULE_DESCRIPTION("STMicroelectronics uvis25 spi driver"); >> +MODULE_LICENSE("GPL v2"); >
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 6a5835fab32e..93fd421b10d7 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -334,6 +334,30 @@ config STK3310 Choosing M will build the driver as a module. If so, the module will be called stk3310. +config ST_UVIS25 + tristate "STMicroelectronics UVIS25 sensor driver" + depends on (I2C || SPI) + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select ST_UVIS25_I2C if (I2C) + select ST_UVIS25_SPI if (SPI_MASTER) + help + Say yes here to build support for STMicroelectronics UVIS25 + uv sensor + + To compile this driver as a module, choose M here: the module + will be called st_uvis25. + +config ST_UVIS25_I2C + tristate + depends on ST_UVIS25 + select REGMAP_I2C + +config ST_UVIS25_SPI + tristate + depends on ST_UVIS25 + select REGMAP_SPI + config TCS3414 tristate "TAOS TCS3414 digital color sensor" depends on I2C diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index f0176a800e14..f714067a7816 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -33,6 +33,9 @@ obj-$(CONFIG_RPR0521) += rpr0521.o obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o obj-$(CONFIG_SI1145) += si1145.o obj-$(CONFIG_STK3310) += stk3310.o +obj-$(CONFIG_ST_UVIS25) += st_uvis25_core.o +obj-$(CONFIG_ST_UVIS25_I2C) += st_uvis25_i2c.o +obj-$(CONFIG_ST_UVIS25_SPI) += st_uvis25_spi.o obj-$(CONFIG_TCS3414) += tcs3414.o obj-$(CONFIG_TCS3472) += tcs3472.o obj-$(CONFIG_TSL2583) += tsl2583.o diff --git a/drivers/iio/light/st_uvis25.h b/drivers/iio/light/st_uvis25.h new file mode 100644 index 000000000000..5e970ab480cd --- /dev/null +++ b/drivers/iio/light/st_uvis25.h @@ -0,0 +1,37 @@ +/* + * STMicroelectronics uvis25 sensor driver + * + * Copyright 2017 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_UVIS25_H +#define ST_UVIS25_H + +#define ST_UVIS25_DEV_NAME "uvis25" + +#include <linux/iio/iio.h> + +/** + * struct st_uvis25_hw - ST UVIS25 sensor instance + * @regmap: Register map of the device. + * @trig: The trigger in use by the driver. + * @enabled: Status of the sensor (false->off, true->on). + * @irq: Device interrupt line (I2C or SPI). + */ +struct st_uvis25_hw { + struct regmap *regmap; + + struct iio_trigger *trig; + bool enabled; + int irq; +}; + +extern const struct dev_pm_ops st_uvis25_pm_ops; + +int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap); + +#endif /* ST_UVIS25_H */ diff --git a/drivers/iio/light/st_uvis25_core.c b/drivers/iio/light/st_uvis25_core.c new file mode 100644 index 000000000000..013da48df571 --- /dev/null +++ b/drivers/iio/light/st_uvis25_core.c @@ -0,0 +1,360 @@ +/* + * STMicroelectronics uvis25 sensor driver + * + * Copyright 2017 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/iio/sysfs.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/interrupt.h> +#include <linux/irqreturn.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/buffer.h> +#include <linux/regmap.h> + +#include "st_uvis25.h" + +#define ST_UVIS25_REG_WHOAMI_ADDR 0x0f +#define ST_UVIS25_REG_WHOAMI_VAL 0xca +#define ST_UVIS25_REG_CTRL1_ADDR 0x20 +#define ST_UVIS25_REG_ODR_MASK BIT(0) +#define ST_UVIS25_REG_BDU_MASK BIT(1) +#define ST_UVIS25_REG_CTRL2_ADDR 0x21 +#define ST_UVIS25_REG_BOOT_MASK BIT(7) +#define ST_UVIS25_REG_CTRL3_ADDR 0x22 +#define ST_UVIS25_REG_HL_MASK BIT(7) +#define ST_UVIS25_REG_STATUS_ADDR 0x27 +#define ST_UVIS25_REG_UV_DA_MASK BIT(0) +#define ST_UVIS25_REG_OUT_ADDR 0x28 + +static const struct iio_chan_spec st_uvis25_channels[] = { + { + .type = IIO_UVINDEX, + .address = ST_UVIS25_REG_OUT_ADDR, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 8, + .storagebits = 8, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(1), +}; + +static int st_uvis25_check_whoami(struct st_uvis25_hw *hw) +{ + int err, data; + + err = regmap_read(hw->regmap, ST_UVIS25_REG_WHOAMI_ADDR, &data); + if (err < 0) { + dev_err(regmap_get_device(hw->regmap), + "failed to read whoami register\n"); + return err; + } + + if (data != ST_UVIS25_REG_WHOAMI_VAL) { + dev_err(regmap_get_device(hw->regmap), + "wrong whoami {%02x vs %02x}\n", + data, ST_UVIS25_REG_WHOAMI_VAL); + return -ENODEV; + } + + return 0; +} + +static int st_uvis25_set_enable(struct st_uvis25_hw *hw, bool enable) +{ + int err; + + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, + ST_UVIS25_REG_ODR_MASK, enable); + if (err < 0) + return err; + + hw->enabled = enable; + + return 0; +} + +static int st_uvis25_read_oneshot(struct st_uvis25_hw *hw, u8 addr, int *val) +{ + int err; + + err = st_uvis25_set_enable(hw, true); + if (err < 0) + return err; + + msleep(1500); + + /* + * in order to avoid possible race conditions with interrupt + * generation, disable the sensor first and then poll output + * register. That sequence guarantees the interrupt will be reset + * when irq line is unmasked + */ + err = st_uvis25_set_enable(hw, false); + if (err < 0) + return err; + + err = regmap_read(hw->regmap, addr, val); + + return err < 0 ? err : IIO_VAL_INT; +} + +static int st_uvis25_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *ch, + int *val, int *val2, long mask) +{ + int ret; + + ret = iio_device_claim_direct_mode(iio_dev); + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: { + struct st_uvis25_hw *hw = iio_priv(iio_dev); + + /* + * mask irq line during oneshot read since the sensor + * does not export the capability to disable data-ready line + * in the register map and it is enabled by default. + * If the line is unmasked during read_raw() it will be set + * active and never reset since the trigger is disabled + */ + if (hw->irq > 0) + disable_irq(hw->irq); + ret = st_uvis25_read_oneshot(hw, ch->address, val); + if (hw->irq > 0) + enable_irq(hw->irq); + break; + } + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(iio_dev); + + return ret; +} + +static irqreturn_t st_uvis25_trigger_handler_thread(int irq, void *private) +{ + struct st_uvis25_hw *hw = private; + int err, status; + + err = regmap_read(hw->regmap, ST_UVIS25_REG_STATUS_ADDR, &status); + if (err < 0) + return IRQ_HANDLED; + + if (!(status & ST_UVIS25_REG_UV_DA_MASK)) + return IRQ_NONE; + + iio_trigger_poll_chained(hw->trig); + + return IRQ_HANDLED; +} + +static int st_uvis25_allocate_trigger(struct iio_dev *iio_dev) +{ + struct st_uvis25_hw *hw = iio_priv(iio_dev); + struct device *dev = regmap_get_device(hw->regmap); + bool irq_active_low = false; + unsigned long irq_type; + int err; + + irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq)); + + switch (irq_type) { + case IRQF_TRIGGER_HIGH: + case IRQF_TRIGGER_RISING: + break; + case IRQF_TRIGGER_LOW: + case IRQF_TRIGGER_FALLING: + irq_active_low = true; + break; + default: + dev_info(dev, "mode %lx unsupported\n", irq_type); + return -EINVAL; + } + + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL3_ADDR, + ST_UVIS25_REG_HL_MASK, irq_active_low); + if (err < 0) + return err; + + err = devm_request_threaded_irq(dev, hw->irq, NULL, + st_uvis25_trigger_handler_thread, + irq_type | IRQF_ONESHOT, + iio_dev->name, hw); + if (err) { + dev_err(dev, "failed to request trigger irq %d\n", + hw->irq); + return err; + } + + hw->trig = devm_iio_trigger_alloc(dev, "%s-trigger", + iio_dev->name); + if (!hw->trig) + return -ENOMEM; + + iio_trigger_set_drvdata(hw->trig, iio_dev); + hw->trig->dev.parent = dev; + + return devm_iio_trigger_register(dev, hw->trig); +} + +static int st_uvis25_buffer_preenable(struct iio_dev *iio_dev) +{ + return st_uvis25_set_enable(iio_priv(iio_dev), true); +} + +static int st_uvis25_buffer_postdisable(struct iio_dev *iio_dev) +{ + return st_uvis25_set_enable(iio_priv(iio_dev), false); +} + +static const struct iio_buffer_setup_ops st_uvis25_buffer_ops = { + .preenable = st_uvis25_buffer_preenable, + .postenable = iio_triggered_buffer_postenable, + .predisable = iio_triggered_buffer_predisable, + .postdisable = st_uvis25_buffer_postdisable, +}; + +static irqreturn_t st_uvis25_buffer_handler_thread(int irq, void *p) +{ + u8 buffer[ALIGN(sizeof(u8), sizeof(s64)) + sizeof(s64)]; + struct iio_poll_func *pf = p; + struct iio_dev *iio_dev = pf->indio_dev; + struct st_uvis25_hw *hw = iio_priv(iio_dev); + int err; + + err = regmap_read(hw->regmap, ST_UVIS25_REG_OUT_ADDR, (int *)buffer); + if (err < 0) + goto out; + + iio_push_to_buffers_with_timestamp(iio_dev, buffer, + iio_get_time_ns(iio_dev)); + +out: + iio_trigger_notify_done(hw->trig); + + return IRQ_HANDLED; +} + +static int st_uvis25_allocate_buffer(struct iio_dev *iio_dev) +{ + struct st_uvis25_hw *hw = iio_priv(iio_dev); + + return devm_iio_triggered_buffer_setup(regmap_get_device(hw->regmap), + iio_dev, NULL, + st_uvis25_buffer_handler_thread, + &st_uvis25_buffer_ops); +} + +static const struct iio_info st_uvis25_info = { + .read_raw = st_uvis25_read_raw, +}; + +static int st_uvis25_init_sensor(struct st_uvis25_hw *hw) +{ + int err; + + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL2_ADDR, + ST_UVIS25_REG_BOOT_MASK, 1); + if (err < 0) + return err; + + msleep(2000); + + return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, + ST_UVIS25_REG_BDU_MASK, 1); +} + +int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap) +{ + struct st_uvis25_hw *hw; + struct iio_dev *iio_dev; + int err; + + iio_dev = devm_iio_device_alloc(dev, sizeof(*hw)); + if (!iio_dev) + return -ENOMEM; + + dev_set_drvdata(dev, (void *)iio_dev); + + hw = iio_priv(iio_dev); + hw->irq = irq; + hw->regmap = regmap; + + err = st_uvis25_check_whoami(hw); + if (err < 0) + return err; + + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->dev.parent = dev; + iio_dev->channels = st_uvis25_channels; + iio_dev->num_channels = ARRAY_SIZE(st_uvis25_channels); + iio_dev->name = ST_UVIS25_DEV_NAME; + iio_dev->info = &st_uvis25_info; + + err = st_uvis25_init_sensor(hw); + if (err < 0) + return err; + + if (hw->irq > 0) { + err = st_uvis25_allocate_buffer(iio_dev); + if (err < 0) + return err; + + err = st_uvis25_allocate_trigger(iio_dev); + if (err) + return err; + } + + return devm_iio_device_register(dev, iio_dev); +} +EXPORT_SYMBOL(st_uvis25_probe); + +static int __maybe_unused st_uvis25_suspend(struct device *dev) +{ + struct iio_dev *iio_dev = dev_get_drvdata(dev); + struct st_uvis25_hw *hw = iio_priv(iio_dev); + + return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, + ST_UVIS25_REG_ODR_MASK, 0); +} + +static int __maybe_unused st_uvis25_resume(struct device *dev) +{ + struct iio_dev *iio_dev = dev_get_drvdata(dev); + struct st_uvis25_hw *hw = iio_priv(iio_dev); + int err = 0; + + if (hw->enabled) + err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR, + ST_UVIS25_REG_ODR_MASK, 1); + + return err; +} + +const struct dev_pm_ops st_uvis25_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(st_uvis25_suspend, st_uvis25_resume) +}; +EXPORT_SYMBOL(st_uvis25_pm_ops); + +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); +MODULE_DESCRIPTION("STMicroelectronics uvis25 sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c new file mode 100644 index 000000000000..e49ec46e9bb8 --- /dev/null +++ b/drivers/iio/light/st_uvis25_i2c.c @@ -0,0 +1,69 @@ +/* + * STMicroelectronics uvis25 i2c driver + * + * Copyright 2017 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/regmap.h> + +#include "st_uvis25.h" + +#define I2C_AUTO_INCREMENT BIT(7) + +const struct regmap_config st_uvis25_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .write_flag_mask = I2C_AUTO_INCREMENT, + .read_flag_mask = I2C_AUTO_INCREMENT, +}; + +static int st_uvis25_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct regmap *regmap; + + regmap = devm_regmap_init_i2c(client, &st_uvis25_i2c_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Failed to register i2c regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return st_uvis25_probe(&client->dev, client->irq, regmap); +} + +static const struct of_device_id st_uvis25_i2c_of_match[] = { + { .compatible = "st,uvis25", }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_uvis25_i2c_of_match); + +static const struct i2c_device_id st_uvis25_i2c_id_table[] = { + { ST_UVIS25_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, st_uvis25_i2c_id_table); + +static struct i2c_driver st_uvis25_driver = { + .driver = { + .name = "st_uvis25_i2c", + .pm = &st_uvis25_pm_ops, + .of_match_table = of_match_ptr(st_uvis25_i2c_of_match), + }, + .probe = st_uvis25_i2c_probe, + .id_table = st_uvis25_i2c_id_table, +}; +module_i2c_driver(st_uvis25_driver); + +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); +MODULE_DESCRIPTION("STMicroelectronics uvis25 i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/light/st_uvis25_spi.c b/drivers/iio/light/st_uvis25_spi.c new file mode 100644 index 000000000000..06e9f7cbe1e7 --- /dev/null +++ b/drivers/iio/light/st_uvis25_spi.c @@ -0,0 +1,68 @@ +/* + * STMicroelectronics uvis25 spi driver + * + * Copyright 2017 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/slab.h> +#include <linux/regmap.h> + +#include "st_uvis25.h" + +#define SENSORS_SPI_READ BIT(7) +#define SPI_AUTO_INCREMENT BIT(6) + +const struct regmap_config st_uvis25_spi_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .read_flag_mask = SENSORS_SPI_READ | SPI_AUTO_INCREMENT, + .write_flag_mask = SPI_AUTO_INCREMENT, +}; + +static int st_uvis25_spi_probe(struct spi_device *spi) +{ + struct regmap *regmap; + + regmap = devm_regmap_init_spi(spi, &st_uvis25_spi_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "Failed to register spi regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return st_uvis25_probe(&spi->dev, spi->irq, regmap); +} + +static const struct of_device_id st_uvis25_spi_of_match[] = { + { .compatible = "st,uvis25", }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_uvis25_spi_of_match); + +static const struct spi_device_id st_uvis25_spi_id_table[] = { + { ST_UVIS25_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(spi, st_uvis25_spi_id_table); + +static struct spi_driver st_uvis25_driver = { + .driver = { + .name = "st_uvis25_spi", + .pm = &st_uvis25_pm_ops, + .of_match_table = of_match_ptr(st_uvis25_spi_of_match), + }, + .probe = st_uvis25_spi_probe, + .id_table = st_uvis25_spi_id_table, +}; +module_spi_driver(st_uvis25_driver); + +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>"); +MODULE_DESCRIPTION("STMicroelectronics uvis25 spi driver"); +MODULE_LICENSE("GPL v2");
add support for STMicroelectronics UVIS25 uv sensor http://www.st.com/resource/en/datasheet/uvis25.pdf - continuos mode support - i2c support - spi support - trigger mode support - system PM support Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> --- drivers/iio/light/Kconfig | 24 +++ drivers/iio/light/Makefile | 3 + drivers/iio/light/st_uvis25.h | 37 ++++ drivers/iio/light/st_uvis25_core.c | 360 +++++++++++++++++++++++++++++++++++++ drivers/iio/light/st_uvis25_i2c.c | 69 +++++++ drivers/iio/light/st_uvis25_spi.c | 68 +++++++ 6 files changed, 561 insertions(+) create mode 100644 drivers/iio/light/st_uvis25.h create mode 100644 drivers/iio/light/st_uvis25_core.c create mode 100644 drivers/iio/light/st_uvis25_i2c.c create mode 100644 drivers/iio/light/st_uvis25_spi.c