| Message ID | 20181212183242.27562340@archlinux (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PULL] Second set of IIO new device support, features, cleanups and minor fixes for 4.21 | expand |
On Wed, Dec 12, 2018 at 06:32:42PM +0000, Jonathan Cameron wrote: > The following changes since commit 16c44c57ecd89402a1acc81617cff463ff446fe7: > > staging: vboxvideo: Rename uint32_t type to u32 (2018-11-23 10:58:47 +0100) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.21b Now pulled and pushed out, thanks. greg k-h
The following changes since commit 16c44c57ecd89402a1acc81617cff463ff446fe7: staging: vboxvideo: Rename uint32_t type to u32 (2018-11-23 10:58:47 +0100) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.21b for you to fetch changes up to db23d88756abd38e0995ea8449d0025b3de4b26b: iio: adc: qcom-spmi-adc5: Initialize prescale properly (2018-12-12 17:45:30 +0000) ---------------------------------------------------------------- Second set of IIO new device support, features and cleanups for the 4.21 cycle. Staging graduation * ad2s90 - Driver for this resolver to digital chip. New drivers and device support. * ad5686 - Add support for ad5310r DAC and associated fix in value read back. * exynos-adc - Support for S5PV210 which is slightly different from other parts. * mcp41010 - Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and MCP42100 microchip potentiometers. New ACPI ids. * ak8975 - AKM9911 ACPI HID. * kxcjk-1013 - KXJ2109 ACPI HID. - KIOX010A ACPI HID. New features * ad5933 - Explicit DT binding. * ad2s90 - Explicit DT binding including dropping spi setup that is done via dt in favour of verifying the settings form DT. * adt7316 - Explicit DT binding and support for gpio, irq_flags etc. * stm32-adc - Runtime power management. Minor fixes and cleanups * core - Protect against missing info structure. * ad2s90 - SPDX - Add documentation fo the mutex. * ad7280a - Check allocation failure. - Fix an accidental replacement of an error return. * adt7316 - Switch some variables to be local and rename for consistency with other drivers. - Revert a false handling of 0 as an error introduced earlier this cycle. * bmi160 - Use devm functions throughout probe() to avoid need for remove(). * hid-sensor-hub - White space cleanup. * hts221 - MAINTAINERS entry. * lis302 - Use generic name in the DT binding doc. * Messon-saradc - Check for allocation error. - Fix some presented clock names that break clk debugfs. * qcom-spmi-adc - A fix for initialization of the prescale property. Came late in the cycle, so merge window is probably the best route for this. * st_lsm6dsx - Allow for variable read length to support wider range of slave devices. ---------------------------------------------------------------- Alexandru Ardelean (1): staging:iio:ad2s90: Add max frequency check at probe Andi Shyti (1): iio: core: check 'info' value before registering the device Chris Coffey (2): dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx Colin Ian King (1): iio: hid-sensor-hub: clean up indentation, remove extraneous tab Evan Green (1): iio: adc: qcom-spmi-adc5: Initialize prescale properly Fabrice Gasnier (3): iio: adc: stm32-adc: move self-calibration to prepare routine iio: adc: stm32-adc: add power management support iio: adc: stm32-adc: switch off running adc when going to low power Hans de Goede (1): iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID Jeremy Fertic (1): Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0" Jonathan Bakker (3): iio: adc: exynos-adc: Add S5PV210 variant iio: adc: Allow selection of Exynos ADC on S5PV210 dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant Lorenzo Bianconi (2): iio: imu: st_lsm6dsx: do not use a fixed read len in read_oneshot iio: humidity: hts221: add entry in MAINTAINERS file Lubomir Rintel (1): dt-bindings: iio: accel: use a generic node name for lis302 Marcelo Schmitt (1): staging: iio: ad5933: add device tree support Martin Blumenstingl (1): iio: adc: meson-saradc: fix internal clock names Martin Kelly (1): iio: bmi160: use all devm functions in probe Matheus Tavares (5): staging:iio:ad2s90: Add device tree support staging:iio:ad2s90: Remove spi setup that should be done via dt dt-bindings:iio:resolver: Add docs for ad2s90 staging:iio:ad2s90: Replace license text w/ SPDX identifier staging:iio:ad2s90: Move out of staging Mircea Caprioru (1): iio: dac: ad5686: fix bit shift read register Nicholas Mc Guire (2): iio: adc: meson-saradc: check for devm_kasprintf failure staging: iio: adc: ad7280a: check for devm_kasprint() failure Shreeya Patel (4): Staging: iio: adt7316: Add of_device_id table Staging: iio: adt7316: Use device tree data to set ldac_pin Staging: iio: adt7316: Switch irq_flags to a local variable Staging: iio: adt7316: Change the name from irq_flags to irq_type Slawomir Stepien (1): staging: iio: adc: ad7280a: fix overwrite of the returned value Stefan Popa (1): iio:dac:ad5686: Add AD5310R support Stephan Gerhold (2): iio: accel: kxcjk-1013: Add the "KXJ2109" ACPI HID iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID Victor Colombo (1): staging:iio:ad2s90: Add comment to device state mutex .../devicetree/bindings/iio/accel/lis302.txt | 4 +- .../bindings/iio/adc/samsung,exynos-adc.txt | 4 +- .../bindings/iio/potentiometer/mcp41010.txt | 28 ++ .../devicetree/bindings/iio/resolver/ad2s90.txt | 31 +++ MAINTAINERS | 8 + drivers/iio/accel/kxcjk-1013.c | 2 + drivers/iio/adc/Kconfig | 2 +- drivers/iio/adc/exynos_adc.c | 14 + drivers/iio/adc/meson_saradc.c | 14 +- drivers/iio/adc/qcom-spmi-adc5.c | 58 ++-- drivers/iio/adc/stm32-adc-core.c | 182 +++++++++---- drivers/iio/adc/stm32-adc.c | 303 +++++++++++++++------ .../iio/common/hid-sensors/hid-sensor-attributes.c | 2 +- drivers/iio/dac/ad5686-spi.c | 21 +- drivers/iio/dac/ad5686.c | 19 +- drivers/iio/dac/ad5686.h | 7 + drivers/iio/imu/bmi160/bmi160.h | 1 - drivers/iio/imu/bmi160/bmi160_core.c | 38 +-- drivers/iio/imu/bmi160/bmi160_i2c.c | 8 - drivers/iio/imu/bmi160/bmi160_spi.c | 8 - drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 14 +- drivers/iio/industrialio-core.c | 3 + drivers/iio/magnetometer/ak8975.c | 1 + drivers/iio/potentiometer/Kconfig | 12 + drivers/iio/potentiometer/Makefile | 1 + drivers/iio/potentiometer/mcp41010.c | 203 ++++++++++++++ drivers/iio/resolver/Kconfig | 10 + drivers/iio/resolver/Makefile | 1 + drivers/{staging => }/iio/resolver/ad2s90.c | 38 +-- drivers/staging/iio/adc/ad7280a.c | 51 ++-- drivers/staging/iio/addac/adt7316-i2c.c | 18 +- drivers/staging/iio/addac/adt7316-spi.c | 1 - drivers/staging/iio/addac/adt7316.c | 22 +- drivers/staging/iio/addac/adt7316.h | 1 - drivers/staging/iio/impedance-analyzer/ad5933.c | 9 + drivers/staging/iio/resolver/Kconfig | 10 - drivers/staging/iio/resolver/Makefile | 1 - 37 files changed, 852 insertions(+), 298 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt create mode 100644 Documentation/devicetree/bindings/iio/resolver/ad2s90.txt create mode 100644 drivers/iio/potentiometer/mcp41010.c rename drivers/{staging => }/iio/resolver/ad2s90.c (79%)