From patchwork Fri Dec 14 18:28:02 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tomasz Duszynski X-Patchwork-Id: 10731555 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 5D6E914DE for ; Fri, 14 Dec 2018 18:28:49 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 7EFE62D1F5 for ; Fri, 14 Dec 2018 18:28:48 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 731C52D367; Fri, 14 Dec 2018 18:28:48 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.0 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,FREEMAIL_FROM,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 856E62D1F5 for ; Fri, 14 Dec 2018 18:28:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730548AbeLNS2g (ORCPT ); Fri, 14 Dec 2018 13:28:36 -0500 Received: from mail-lf1-f67.google.com ([209.85.167.67]:45212 "EHLO mail-lf1-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729619AbeLNS2f (ORCPT ); Fri, 14 Dec 2018 13:28:35 -0500 Received: by mail-lf1-f67.google.com with SMTP id b20so4953650lfa.12; Fri, 14 Dec 2018 10:28:33 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=BHRSF7UgYDFDYq4hQV7eJSUHi9StertJZM69mCRc5sw=; b=PR3QY+umY/nCgzbp/7HnaCluY7xGVllYxEzvo2fJjXeMs7q5NuJxJ4HCDjTj7r/G93 oOdLdo6Y4lsCLgW493XTyAT8QIawhluoVbpka6v0pAZhVDZGLykr1mRxKjHyz6kYpiMz Kk74TF4fkOE6/mWJ79AcVMmeDPiILbFzP6U59FAxYhuJjXeDJe50xvfCCEnjQedrS7ZX F7Vi1rk+Mq7IJ3QDglXGLhXh/9aezRi6IRIf3HmOZp71Hw08JFeFf5jsiow9rmi0QyUq t1StXXWlPA+vsZ++cWMeDOr/dM7Pe3yyZmJVBIY1S+fAKeCuRY7Fvv9m7ePLLkcijnFd qsaA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=BHRSF7UgYDFDYq4hQV7eJSUHi9StertJZM69mCRc5sw=; b=dHeRHAIV4rEi/qSrW8+EmAfcPJoLH5ZaXGDStVhIyWVeKIORzNvHwwD4sYczyEGwpd es6zGcV7cmONh1C21AUfGn1MnzlfY2jc6vQ4Kn6HRYAtYSwCqYpN6RQ38fQLRDccHlYa c/OQqLDrWtdO5DkoF9a69+eAPs95iYYRJ07WgCVsWqZEJLKwruBxXZH0ksrn2q8KysLo 3N95Lwg/H9raIgxrkiTpdcmxklsszBrRsZW59acQV62a3gy4xv1ZO9zUGVmjBsb8aotd 2iiZKFqNzhqqcKp920H1w/7hjqnOBCGXsqpFHXrejBVyIknetkrnq5bilVdpNzFHvzs8 JNjw== X-Gm-Message-State: AA+aEWbj6nLuoRv8VKUfwF+q3e3DXJSFtCIAkP00+WoSVDiMryZ1D48s rQePf82KVIXH1rAwA/GxIk86mFzsrVs= X-Google-Smtp-Source: AFSGD/VwfcnKYn31OXz8ES3ZOnxlf9HGpXwx8Jt3frf/j5TKOE/Jmtlmy0eD7mkJpZy9HaIal7ekAA== X-Received: by 2002:a19:5d42:: with SMTP id p2mr2589564lfj.83.1544812112189; Fri, 14 Dec 2018 10:28:32 -0800 (PST) Received: from arch.domain.name (89-70-220-87.dynamic.chello.pl. [89.70.220.87]) by smtp.gmail.com with ESMTPSA id e14-v6sm947961ljb.31.2018.12.14.10.28.30 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 14 Dec 2018 10:28:31 -0800 (PST) From: Tomasz Duszynski To: linux-iio@vger.kernel.org Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, robh+dt@kernel.org, jic23@jic23.retrosnub.co.uk, a.brauchli@elementarea.net, Tomasz Duszynski Subject: [PATCH v4 2/3] iio: chemical: add support for Sensirion SPS30 sensor Date: Fri, 14 Dec 2018 19:28:02 +0100 Message-Id: <20181214182803.9006-3-tduszyns@gmail.com> X-Mailer: git-send-email 2.20.0 In-Reply-To: <20181214182803.9006-1-tduszyns@gmail.com> References: <20181214182803.9006-1-tduszyns@gmail.com> MIME-Version: 1.0 Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Add support for Sensirion SPS30 particulate matter sensor. Signed-off-by: Tomasz Duszynski --- drivers/iio/chemical/Kconfig | 11 + drivers/iio/chemical/Makefile | 1 + drivers/iio/chemical/sps30.c | 406 ++++++++++++++++++++++++++++++++++ 3 files changed, 418 insertions(+) create mode 100644 drivers/iio/chemical/sps30.c diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index b8e005be4f87..57832b4360e9 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -61,6 +61,17 @@ config IAQCORE iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) sensors +config SPS30 + tristate "SPS30 particulate matter sensor" + depends on I2C + select CRC8 + help + Say Y here to build support for the Sensirion SPS30 particulate + matter sensor. + + To compile this driver as a module, choose M here: the module will + be called sps30. + config VZ89X tristate "SGX Sensortech MiCS VZ89X VOC sensor" depends on I2C diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile index 2f4c4ba4d781..9f42f4252151 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o obj-$(CONFIG_BME680_SPI) += bme680_spi.o obj-$(CONFIG_CCS811) += ccs811.o obj-$(CONFIG_IAQCORE) += ams-iaq-core.o +obj-$(CONFIG_SPS30) += sps30.o obj-$(CONFIG_VZ89X) += vz89x.o diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c new file mode 100644 index 000000000000..f1cea8699c78 --- /dev/null +++ b/drivers/iio/chemical/sps30.c @@ -0,0 +1,406 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sensirion SPS30 particulate matter sensor driver + * + * Copyright (c) Tomasz Duszynski + * + * I2C slave address: 0x69 + * + * TODO: + * - support for turning on fan cleaning + * - support for reading/setting auto cleaning interval + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SPS30_CRC8_POLYNOMIAL 0x31 +/* max number of bytes needed to store PM measurements or serial string */ +#define SPS30_MAX_READ_SIZE 48 +/* sensor measures reliably up to 3000 ug / m3 */ +#define SPS30_MAX_PM 3000 + +/* SPS30 commands */ +#define SPS30_START_MEAS 0x0010 +#define SPS30_STOP_MEAS 0x0104 +#define SPS30_RESET 0xd304 +#define SPS30_READ_DATA_READY_FLAG 0x0202 +#define SPS30_READ_DATA 0x0300 +#define SPS30_READ_SERIAL 0xd033 + +enum { + PM1, + PM2P5, + PM4, + PM10, +}; + +struct sps30_state { + struct i2c_client *client; + /* + * Guards against concurrent access to sensor registers. + * Must be held whenever sequence of commands is to be executed. + */ + struct mutex lock; +}; + +DECLARE_CRC8_TABLE(sps30_crc8_table); + +static int sps30_write_then_read(struct sps30_state *state, u8 *txbuf, + int txsize, u8 *rxbuf, int rxsize) +{ + int ret; + + /* + * Sensor does not support repeated start so instead of + * sending two i2c messages in a row we just send one by one. + */ + ret = i2c_master_send(state->client, txbuf, txsize); + if (ret != txsize) + return ret < 0 ? ret : -EIO; + + if (!rxbuf) + return 0; + + ret = i2c_master_recv(state->client, rxbuf, rxsize); + if (ret != rxsize) + return ret < 0 ? ret : -EIO; + + return 0; +} + +static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size) +{ + /* + * Internally sensor stores measurements in a following manner: + * + * PM1: upper two bytes, crc8, lower two bytes, crc8 + * PM2P5: upper two bytes, crc8, lower two bytes, crc8 + * PM4: upper two bytes, crc8, lower two bytes, crc8 + * PM10: upper two bytes, crc8, lower two bytes, crc8 + * + * What follows next are number concentration measurements and + * typical particle size measurement which we omit. + */ + u8 buf[SPS30_MAX_READ_SIZE] = { cmd >> 8, cmd }; + int i, ret = 0; + + switch (cmd) { + case SPS30_START_MEAS: + buf[2] = 0x03; + buf[3] = 0x00; + buf[4] = crc8(sps30_crc8_table, &buf[2], 2, CRC8_INIT_VALUE); + ret = sps30_write_then_read(state, buf, 5, NULL, 0); + break; + case SPS30_STOP_MEAS: + case SPS30_RESET: + ret = sps30_write_then_read(state, buf, 2, NULL, 0); + break; + case SPS30_READ_DATA_READY_FLAG: + case SPS30_READ_DATA: + case SPS30_READ_SERIAL: + /* every two data bytes are checksummed */ + size += size / 2; + ret = sps30_write_then_read(state, buf, 2, buf, size); + break; + } + + if (ret) + return ret; + + /* validate received data and strip off crc bytes */ + for (i = 0; i < size; i += 3) { + u8 crc = crc8(sps30_crc8_table, &buf[i], 2, CRC8_INIT_VALUE); + + if (crc != buf[i + 2]) { + dev_err(&state->client->dev, + "data integrity check failed\n"); + return -EIO; + } + + *data++ = buf[i]; + *data++ = buf[i + 1]; + } + + return 0; +} + +static int sps30_float_to_int_clamped(const u8 *fp) +{ + int val = get_unaligned_be32(fp); + int mantissa = val & GENMASK(22, 0); + /* this is fine since passed float is always non-negative */ + int exp = val >> 23; + int fraction, shift; + + /* special case 0 */ + if (!exp && !mantissa) + return 0; + + exp -= 127; + if (exp < 0) { + /* return values ranging from 1 to 99 */ + return ((((1 << 23) + mantissa) * 100) >> 23) >> (-exp); + } + + /* return values ranging from 100 to 300000 */ + shift = 23 - exp; + val = (1 << exp) + (mantissa >> shift); + if (val >= SPS30_MAX_PM) + return SPS30_MAX_PM * 100; + + fraction = mantissa & GENMASK(shift - 1, 0); + + return val * 100 + ((fraction * 100) >> shift); +} + +static int sps30_do_meas(struct sps30_state *state, int *data, int size) +{ + int i, ret, tries = 5; + u8 tmp[16]; + + while (tries--) { + ret = sps30_do_cmd(state, SPS30_READ_DATA_READY_FLAG, tmp, 2); + if (ret) + return -EIO; + + /* new measurements ready to be read */ + if (tmp[1] == 1) + break; + + msleep_interruptible(300); + } + + if (!tries) + return -ETIMEDOUT; + + ret = sps30_do_cmd(state, SPS30_READ_DATA, tmp, sizeof(int) * size); + if (ret) + return ret; + + for (i = 0; i < size; i++) + data[i] = sps30_float_to_int_clamped(&tmp[4 * i]); + + return 0; +} + +static irqreturn_t sps30_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct sps30_state *state = iio_priv(indio_dev); + int ret, data[4 + 2]; /* PM1, PM2P5, PM4, PM10, timestamp */ + + mutex_lock(&state->lock); + ret = sps30_do_meas(state, data, 4); + mutex_unlock(&state->lock); + if (ret) + goto err; + + iio_push_to_buffers_with_timestamp(indio_dev, data, + iio_get_time_ns(indio_dev)); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int sps30_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct sps30_state *state = iio_priv(indio_dev); + int data[4], ret = -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_MASSCONCENTRATION: + mutex_lock(&state->lock); + /* read up to the number of bytes actually needed */ + switch (chan->channel2) { + case IIO_MOD_PM1: + ret = sps30_do_meas(state, data, 1); + break; + case IIO_MOD_PM2P5: + ret = sps30_do_meas(state, data, 2); + break; + case IIO_MOD_PM4: + ret = sps30_do_meas(state, data, 3); + break; + case IIO_MOD_PM10: + ret = sps30_do_meas(state, data, 4); + break; + } + mutex_unlock(&state->lock); + if (ret) + return ret; + + *val = data[chan->address] / 100; + *val2 = (data[chan->address] % 100) * 10000; + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_MASSCONCENTRATION: + switch (chan->channel2) { + case IIO_MOD_PM1: + case IIO_MOD_PM2P5: + case IIO_MOD_PM4: + case IIO_MOD_PM10: + *val = 0; + *val2 = 10000; + + return IIO_VAL_INT_PLUS_MICRO; + } + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +static const struct iio_info sps30_info = { + .read_raw = sps30_read_raw, +}; + +#define SPS30_CHAN(_index, _mod) { \ + .type = IIO_MASSCONCENTRATION, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _mod, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .address = _mod, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 19, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec sps30_channels[] = { + SPS30_CHAN(0, PM1), + SPS30_CHAN(1, PM2P5), + SPS30_CHAN(2, PM4), + SPS30_CHAN(3, PM10), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static void sps30_stop_meas(void *data) +{ + struct sps30_state *state = data; + + sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0); +} + +static const unsigned long sps30_scan_masks[] = { 0x0f, 0x00 }; + +static int sps30_probe(struct i2c_client *client) +{ + struct iio_dev *indio_dev; + struct sps30_state *state; + u8 buf[32]; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + state = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + state->client = client; + indio_dev->dev.parent = &client->dev; + indio_dev->info = &sps30_info; + indio_dev->name = client->name; + indio_dev->channels = sps30_channels; + indio_dev->num_channels = ARRAY_SIZE(sps30_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = sps30_scan_masks; + + mutex_init(&state->lock); + crc8_populate_msb(sps30_crc8_table, SPS30_CRC8_POLYNOMIAL); + + ret = sps30_do_cmd(state, SPS30_RESET, NULL, 0); + if (ret) { + dev_err(&client->dev, "failed to reset device\n"); + return ret; + } + msleep(300); + /* + * Power-on-reset causes sensor to produce some glitch on i2c bus and + * some controllers end up in error state. Recover simply by placing + * some data on the bus, for example STOP_MEAS command, which + * is NOP in this case. + */ + sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0); + + ret = sps30_do_cmd(state, SPS30_READ_SERIAL, buf, sizeof(buf)); + if (ret) { + dev_err(&client->dev, "failed to read serial number\n"); + return ret; + } + /* returned serial number is already NUL terminated */ + dev_info(&client->dev, "serial number: %s\n", buf); + + ret = sps30_do_cmd(state, SPS30_START_MEAS, NULL, 0); + if (ret) { + dev_err(&client->dev, "failed to start measurement\n"); + return ret; + } + + ret = devm_add_action_or_reset(&client->dev, sps30_stop_meas, state); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL, + sps30_trigger_handler, NULL); + if (ret) + return ret; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id sps30_id[] = { + { "sps30" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sps30_id); + +static const struct of_device_id sps30_of_match[] = { + { .compatible = "sensirion,sps30" }, + { } +}; +MODULE_DEVICE_TABLE(of, sps30_of_match); + +static struct i2c_driver sps30_driver = { + .driver = { + .name = "sps30", + .of_match_table = sps30_of_match, + }, + .id_table = sps30_id, + .probe_new = sps30_probe, +}; +module_i2c_driver(sps30_driver); + +MODULE_AUTHOR("Tomasz Duszynski "); +MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor driver"); +MODULE_LICENSE("GPL v2");