| Message ID | 20190128094931.4430-1-ricardo@ribalda.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3,1/2] iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612 | expand |
On Mon, 28 Jan 2019 10:49:30 +0100 Ricardo Ribalda Delgado <ricardo@ribalda.com> wrote: > It is a driver for Texas Instruments Dual, 12-Bit Serial Input > Digital-to-Analog Converter. > > Datasheet of this chip: > http://www.ti.com/lit/ds/sbas106/sbas106.pdf > > Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Hi Ricardo, Trivial bits inline I would have fixed, but seems we will be going for a v4 for the binding anyway! Jonathan > --- > v3: Changes by Jonathan Cameron <jic23@kernel.org> > > - Include OF compatible strings > - Rename RESOLUTION define > - Create defines for BIT positions > - Support DMA > - Rename gpio > - Remove scantype > - Fix scale > - Use iio_priv at variable definition > - (Ab)use ARRAY_SIZE for number of channels (love the idea) > > > MAINTAINERS | 6 ++ > drivers/iio/dac/Kconfig | 10 ++ > drivers/iio/dac/Makefile | 1 + > drivers/iio/dac/ti-dac7612.c | 173 +++++++++++++++++++++++++++++++++++ > 4 files changed, 190 insertions(+) > create mode 100644 drivers/iio/dac/ti-dac7612.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index d039f66a5cef..30ba5435906b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -14877,6 +14877,12 @@ F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt > F: drivers/clk/keystone/sci-clk.c > F: drivers/reset/reset-ti-sci.c > > +Texas Instruments' DAC7612 DAC Driver > +M: Ricardo Ribalda <ricardo@ribalda.com> > +L: linux-iio@vger.kernel.org > +S: Supported > +F: drivers/iio/dac/ti-dac7612.c > + > THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER > M: Hans Verkuil <hverkuil@xs4all.nl> > L: linux-media@vger.kernel.org > diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig > index f28daf67db6a..fbef9107acad 100644 > --- a/drivers/iio/dac/Kconfig > +++ b/drivers/iio/dac/Kconfig > @@ -375,6 +375,16 @@ config TI_DAC7311 > > If compiled as a module, it will be called ti-dac7311. > > +config TI_DAC7612 > + tristate "Texas Instruments 12-bit 2-channel DAC driver" > + depends on SPI_MASTER && GPIOLIB > + help > + Driver for the Texas Instruments DAC7612, DAC7612U, DAC7612UB > + The driver hand drive the load pin automatically, otherwise > + it needs to be toggled manually. > + > + If compiled as a module, it will be called ti-dac7612. > + > config VF610_DAC > tristate "Vybrid vf610 DAC driver" > depends on OF > diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile > index f0a37c93de8e..1369fa1d2f0e 100644 > --- a/drivers/iio/dac/Makefile > +++ b/drivers/iio/dac/Makefile > @@ -41,4 +41,5 @@ obj-$(CONFIG_STM32_DAC) += stm32-dac.o > obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o > obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o > obj-$(CONFIG_TI_DAC7311) += ti-dac7311.o > +obj-$(CONFIG_TI_DAC7612) += ti-dac7612.o > obj-$(CONFIG_VF610_DAC) += vf610_dac.o > diff --git a/drivers/iio/dac/ti-dac7612.c b/drivers/iio/dac/ti-dac7612.c > new file mode 100644 > index 000000000000..a2f58256a784 > --- /dev/null > +++ b/drivers/iio/dac/ti-dac7612.c > @@ -0,0 +1,173 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * DAC7612 Dual, 12-Bit Serial input Digital-to-Analog Converter > + * > + * Copyright 2019 Qtechnology A/S > + * 2019 Ricardo Ribalda <ricardo@ribalda.com> > + * > + * Licensed under the GPL-2. > + */ > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/spi/spi.h> > +#include <linux/gpio/consumer.h> > +#include <linux/iio/iio.h> > + > +#define DAC7612_RESOLUTION 12 > +#define DAC7612_ADDRESS 4 > +#define DAC7612_START 5 > + > +struct dac7612 { > + struct spi_device *spi; > + struct gpio_desc *loaddacs; > + uint16_t cache[2]; > + > + // DMA /* DMA */ But a slightly more detailed comment preferred. > + uint8_t data[2] ____cacheline_aligned; > +}; > + > +static int dac7612_cmd_single(struct dac7612 *priv, int channel, u16 val) > +{ > + int ret; > + > + priv->data[0] = BIT(DAC7612_START) | (channel << DAC7612_ADDRESS); > + priv->data[0] |= val >> 8; > + priv->data[1] = val & 0xff; > + > + priv->cache[channel] = val; > + > + ret = spi_write(priv->spi, priv->data, sizeof(priv->data)); > + if (ret) > + return ret; > + > + gpiod_set_value(priv->loaddacs, 1); > + gpiod_set_value(priv->loaddacs, 0); > + > + return 0; > +} > + > +#define dac7612_CHANNEL(chan, name) { \ > + .type = IIO_VOLTAGE, \ > + .channel = (chan), \ > + .indexed = 1, \ > + .output = 1, \ > + .datasheet_name = name, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > +} > + > +static const struct iio_chan_spec dac7612_channels[] = { > + dac7612_CHANNEL(0, "OUTA"), > + dac7612_CHANNEL(1, "OUTB"), > +}; > + > +static int dac7612_read_raw(struct iio_dev *iio_dev, > + const struct iio_chan_spec *chan, > + int *val, int *val2, long mask) > +{ > + struct dac7612 *priv; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + priv = iio_priv(iio_dev); > + *val = priv->cache[chan->channel]; > + return IIO_VAL_INT; > + > + case IIO_CHAN_INFO_SCALE: > + *val = 1; > + return IIO_VAL_INT; > + > + default: > + return -EINVAL; > + } > +} > + > +static int dac7612_write_raw(struct iio_dev *iio_dev, > + const struct iio_chan_spec *chan, > + int val, int val2, long mask) > +{ > + struct dac7612 *priv = iio_priv(iio_dev); > + int ret; > + > + if (mask != IIO_CHAN_INFO_RAW) > + return -EINVAL; > + > + if ((val >= BIT(DAC7612_RESOLUTION)) || val < 0 || val2) > + return -EINVAL; > + > + if (val == priv->cache[chan->channel]) > + return 0; > + > + mutex_lock(&iio_dev->mlock); > + ret = dac7612_cmd_single(priv, chan->channel, val); > + mutex_unlock(&iio_dev->mlock); > + > + return ret; > +} > + > +static const struct iio_info dac7612_info = { > + .read_raw = dac7612_read_raw, > + .write_raw = dac7612_write_raw, > +}; > + > +static int dac7612_probe(struct spi_device *spi) > +{ > + struct iio_dev *iio_dev; > + struct dac7612 *priv; > + int i; > + int ret; > + > + iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*priv)); > + if (!iio_dev) > + return -ENOMEM; > + > + priv = iio_priv(iio_dev); Please add a comment here about why it's optional but we then use it anyway (which is fine but none obvious!) > + priv->loaddacs = devm_gpiod_get_optional(&spi->dev, "loaddacs", > + GPIOD_OUT_LOW); > + if (IS_ERR(priv->loaddacs)) > + return PTR_ERR(priv->loaddacs); > + priv->spi = spi; > + spi_set_drvdata(spi, iio_dev); > + iio_dev->dev.parent = &spi->dev; > + iio_dev->info = &dac7612_info; > + iio_dev->modes = INDIO_DIRECT_MODE; > + iio_dev->channels = dac7612_channels; > + iio_dev->num_channels = ARRAY_SIZE(priv->cache); > + iio_dev->name = spi_get_device_id(spi)->name; > + > + for (i = 0; i < ARRAY_SIZE(priv->cache); i++) { > + ret = dac7612_cmd_single(priv, i, 0); > + if (ret) > + return ret; > + } > + > + return devm_iio_device_register(&spi->dev, iio_dev); > +} > + > +static const struct spi_device_id dac7612_id[] = { > + {"ti-dac7612"}, > + {} > +}; > +MODULE_DEVICE_TABLE(spi, dac7612_id); > + > +static const struct of_device_id dac7612_of_match[] = { > + { .compatible = "ti,dac7612" }, > + { .compatible = "ti,dac7612u" }, > + { .compatible = "ti,dac7612b" }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, dac7612_of_match); > + > +static struct spi_driver dac7612_driver = { > + .driver = { > + .name = "ti-dac7612", > + .of_match_table = dac7612_of_match, > + }, > + .probe = dac7612_probe, > + .id_table = dac7612_id, > +}; > +module_spi_driver(dac7612_driver); > + > +MODULE_AUTHOR("Ricardo Ribalda <ricardo@ribalda.com>"); > +MODULE_DESCRIPTION("Texas Instruments DAC7612 DAC driver"); > +MODULE_LICENSE("GPL v2");
diff --git a/MAINTAINERS b/MAINTAINERS index d039f66a5cef..30ba5435906b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14877,6 +14877,12 @@ F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt F: drivers/clk/keystone/sci-clk.c F: drivers/reset/reset-ti-sci.c +Texas Instruments' DAC7612 DAC Driver +M: Ricardo Ribalda <ricardo@ribalda.com> +L: linux-iio@vger.kernel.org +S: Supported +F: drivers/iio/dac/ti-dac7612.c + THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER M: Hans Verkuil <hverkuil@xs4all.nl> L: linux-media@vger.kernel.org diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index f28daf67db6a..fbef9107acad 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -375,6 +375,16 @@ config TI_DAC7311 If compiled as a module, it will be called ti-dac7311. +config TI_DAC7612 + tristate "Texas Instruments 12-bit 2-channel DAC driver" + depends on SPI_MASTER && GPIOLIB + help + Driver for the Texas Instruments DAC7612, DAC7612U, DAC7612UB + The driver hand drive the load pin automatically, otherwise + it needs to be toggled manually. + + If compiled as a module, it will be called ti-dac7612. + config VF610_DAC tristate "Vybrid vf610 DAC driver" depends on OF diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index f0a37c93de8e..1369fa1d2f0e 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -41,4 +41,5 @@ obj-$(CONFIG_STM32_DAC) += stm32-dac.o obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o obj-$(CONFIG_TI_DAC7311) += ti-dac7311.o +obj-$(CONFIG_TI_DAC7612) += ti-dac7612.o obj-$(CONFIG_VF610_DAC) += vf610_dac.o diff --git a/drivers/iio/dac/ti-dac7612.c b/drivers/iio/dac/ti-dac7612.c new file mode 100644 index 000000000000..a2f58256a784 --- /dev/null +++ b/drivers/iio/dac/ti-dac7612.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DAC7612 Dual, 12-Bit Serial input Digital-to-Analog Converter + * + * Copyright 2019 Qtechnology A/S + * 2019 Ricardo Ribalda <ricardo@ribalda.com> + * + * Licensed under the GPL-2. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/gpio/consumer.h> +#include <linux/iio/iio.h> + +#define DAC7612_RESOLUTION 12 +#define DAC7612_ADDRESS 4 +#define DAC7612_START 5 + +struct dac7612 { + struct spi_device *spi; + struct gpio_desc *loaddacs; + uint16_t cache[2]; + + // DMA + uint8_t data[2] ____cacheline_aligned; +}; + +static int dac7612_cmd_single(struct dac7612 *priv, int channel, u16 val) +{ + int ret; + + priv->data[0] = BIT(DAC7612_START) | (channel << DAC7612_ADDRESS); + priv->data[0] |= val >> 8; + priv->data[1] = val & 0xff; + + priv->cache[channel] = val; + + ret = spi_write(priv->spi, priv->data, sizeof(priv->data)); + if (ret) + return ret; + + gpiod_set_value(priv->loaddacs, 1); + gpiod_set_value(priv->loaddacs, 0); + + return 0; +} + +#define dac7612_CHANNEL(chan, name) { \ + .type = IIO_VOLTAGE, \ + .channel = (chan), \ + .indexed = 1, \ + .output = 1, \ + .datasheet_name = name, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec dac7612_channels[] = { + dac7612_CHANNEL(0, "OUTA"), + dac7612_CHANNEL(1, "OUTB"), +}; + +static int dac7612_read_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct dac7612 *priv; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + priv = iio_priv(iio_dev); + *val = priv->cache[chan->channel]; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 1; + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int dac7612_write_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long mask) +{ + struct dac7612 *priv = iio_priv(iio_dev); + int ret; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + if ((val >= BIT(DAC7612_RESOLUTION)) || val < 0 || val2) + return -EINVAL; + + if (val == priv->cache[chan->channel]) + return 0; + + mutex_lock(&iio_dev->mlock); + ret = dac7612_cmd_single(priv, chan->channel, val); + mutex_unlock(&iio_dev->mlock); + + return ret; +} + +static const struct iio_info dac7612_info = { + .read_raw = dac7612_read_raw, + .write_raw = dac7612_write_raw, +}; + +static int dac7612_probe(struct spi_device *spi) +{ + struct iio_dev *iio_dev; + struct dac7612 *priv; + int i; + int ret; + + iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*priv)); + if (!iio_dev) + return -ENOMEM; + + priv = iio_priv(iio_dev); + priv->loaddacs = devm_gpiod_get_optional(&spi->dev, "loaddacs", + GPIOD_OUT_LOW); + if (IS_ERR(priv->loaddacs)) + return PTR_ERR(priv->loaddacs); + priv->spi = spi; + spi_set_drvdata(spi, iio_dev); + iio_dev->dev.parent = &spi->dev; + iio_dev->info = &dac7612_info; + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->channels = dac7612_channels; + iio_dev->num_channels = ARRAY_SIZE(priv->cache); + iio_dev->name = spi_get_device_id(spi)->name; + + for (i = 0; i < ARRAY_SIZE(priv->cache); i++) { + ret = dac7612_cmd_single(priv, i, 0); + if (ret) + return ret; + } + + return devm_iio_device_register(&spi->dev, iio_dev); +} + +static const struct spi_device_id dac7612_id[] = { + {"ti-dac7612"}, + {} +}; +MODULE_DEVICE_TABLE(spi, dac7612_id); + +static const struct of_device_id dac7612_of_match[] = { + { .compatible = "ti,dac7612" }, + { .compatible = "ti,dac7612u" }, + { .compatible = "ti,dac7612b" }, + { }, +}; +MODULE_DEVICE_TABLE(of, dac7612_of_match); + +static struct spi_driver dac7612_driver = { + .driver = { + .name = "ti-dac7612", + .of_match_table = dac7612_of_match, + }, + .probe = dac7612_probe, + .id_table = dac7612_id, +}; +module_spi_driver(dac7612_driver); + +MODULE_AUTHOR("Ricardo Ribalda <ricardo@ribalda.com>"); +MODULE_DESCRIPTION("Texas Instruments DAC7612 DAC driver"); +MODULE_LICENSE("GPL v2");
It is a driver for Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter. Datasheet of this chip: http://www.ti.com/lit/ds/sbas106/sbas106.pdf Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> --- v3: Changes by Jonathan Cameron <jic23@kernel.org> - Include OF compatible strings - Rename RESOLUTION define - Create defines for BIT positions - Support DMA - Rename gpio - Remove scantype - Fix scale - Use iio_priv at variable definition - (Ab)use ARRAY_SIZE for number of channels (love the idea) MAINTAINERS | 6 ++ drivers/iio/dac/Kconfig | 10 ++ drivers/iio/dac/Makefile | 1 + drivers/iio/dac/ti-dac7612.c | 173 +++++++++++++++++++++++++++++++++++ 4 files changed, 190 insertions(+) create mode 100644 drivers/iio/dac/ti-dac7612.c