| Message ID | 20190201215759.14569-2-tduszyns@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | add support for PMS7003 PM sensor | expand |
On Fri, 1 Feb 2019 22:57:57 +0100 Tomasz Duszynski <tduszyns@gmail.com> wrote: > Add support for Plantower PMS7003 particulate matter sensor. > > Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Other than waiting for review of the binding and potentially that minor change to the gpio naming I suggested, this looks good to me. Thanks, Jonathan > --- > drivers/iio/chemical/Kconfig | 10 + > drivers/iio/chemical/Makefile | 1 + > drivers/iio/chemical/pms7003.c | 340 +++++++++++++++++++++++++++++++++ > 3 files changed, 351 insertions(+) > create mode 100644 drivers/iio/chemical/pms7003.c > > diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig > index 57832b4360e9..d5d146e9e372 100644 > --- a/drivers/iio/chemical/Kconfig > +++ b/drivers/iio/chemical/Kconfig > @@ -61,6 +61,16 @@ config IAQCORE > iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) > sensors > > +config PMS7003 > + tristate "Plantower PMS7003 particulate matter sensor" > + depends on SERIAL_DEV_BUS > + help > + Say Y here to build support for the Plantower PMS7003 particulate > + matter sensor. > + > + To compile this driver as a module, choose M here: the module will > + be called pms7003. > + > config SPS30 > tristate "SPS30 particulate matter sensor" > depends on I2C > diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile > index 65bf0f89c0e4..f5d1365acb49 100644 > --- a/drivers/iio/chemical/Makefile > +++ b/drivers/iio/chemical/Makefile > @@ -9,6 +9,7 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o > obj-$(CONFIG_BME680_SPI) += bme680_spi.o > obj-$(CONFIG_CCS811) += ccs811.o > obj-$(CONFIG_IAQCORE) += ams-iaq-core.o > +obj-$(CONFIG_PMS7003) += pms7003.o > obj-$(CONFIG_SENSIRION_SGP30) += sgp30.o > obj-$(CONFIG_SPS30) += sps30.o > obj-$(CONFIG_VZ89X) += vz89x.o > diff --git a/drivers/iio/chemical/pms7003.c b/drivers/iio/chemical/pms7003.c > new file mode 100644 > index 000000000000..0c913c60adde > --- /dev/null > +++ b/drivers/iio/chemical/pms7003.c > @@ -0,0 +1,340 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Plantower PMS7003 particulate matter sensor driver > + * > + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> > + */ > + > +#include <asm/unaligned.h> > +#include <linux/completion.h> > +#include <linux/device.h> > +#include <linux/errno.h> > +#include <linux/iio/buffer.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/trigger_consumer.h> > +#include <linux/iio/triggered_buffer.h> > +#include <linux/jiffies.h> > +#include <linux/kernel.h> > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/serdev.h> > + > +#define PMS7003_DRIVER_NAME "pms7003" > + > +#define PMS7003_MAGIC 0x424d > +/* last 2 data bytes hold frame checksum */ > +#define PMS7003_MAX_DATA_LENGTH 28 > +#define PMS7003_CHECKSUM_LENGTH 2 > +#define PMS7003_PM10_OFFSET 10 > +#define PMS7003_PM2P5_OFFSET 8 > +#define PMS7003_PM1_OFFSET 6 > + > +#define PMS7003_TIMEOUT msecs_to_jiffies(6000) > +#define PMS7003_CMD_LENGTH 7 > +#define PMS7003_PM_MAX 1000 > +#define PMS7003_PM_MIN 0 > + > +enum { > + PM1, > + PM2P5, > + PM10, > +}; > + > +enum pms7003_cmd { > + CMD_WAKEUP, > + CMD_ENTER_PASSIVE_MODE, > + CMD_READ_PASSIVE, > + CMD_SLEEP, > +}; > + > +/* > + * commands have following format: > + * > + * +------+------+-----+------+-----+-----------+-----------+ > + * | 0x42 | 0x4d | cmd | 0x00 | arg | cksum msb | cksum lsb | > + * +------+------+-----+------+-----+-----------+-----------+ > + */ > +static const u8 pms7003_cmd_tbl[][PMS7003_CMD_LENGTH] = { > + [CMD_WAKEUP] = { 0x42, 0x4d, 0xe4, 0x00, 0x01, 0x01, 0x74 }, > + [CMD_ENTER_PASSIVE_MODE] = { 0x42, 0x4d, 0xe1, 0x00, 0x00, 0x01, 0x70 }, > + [CMD_READ_PASSIVE] = { 0x42, 0x4d, 0xe2, 0x00, 0x00, 0x01, 0x71 }, > + [CMD_SLEEP] = { 0x42, 0x4d, 0xe4, 0x00, 0x00, 0x01, 0x73 }, > +}; > + > +struct pms7003_frame { > + u8 data[PMS7003_MAX_DATA_LENGTH]; > + u16 expected_length; > + u16 length; > +}; > + > +struct pms7003_state { > + struct serdev_device *serdev; > + struct pms7003_frame frame; > + struct completion frame_ready; > + struct mutex lock; /* must be held whenever state gets touched */ > +}; > + > +static int pms7003_do_cmd(struct pms7003_state *state, enum pms7003_cmd cmd) > +{ > + int ret; > + > + ret = serdev_device_write(state->serdev, pms7003_cmd_tbl[cmd], > + PMS7003_CMD_LENGTH, PMS7003_TIMEOUT); > + if (ret < PMS7003_CMD_LENGTH) > + return ret < 0 ? ret : -EIO; > + > + ret = wait_for_completion_interruptible_timeout(&state->frame_ready, > + PMS7003_TIMEOUT); > + if (!ret) > + ret = -ETIMEDOUT; > + > + return ret < 0 ? ret : 0; > +} > + > +static u16 pms7003_get_pm(const u8 *data) > +{ > + return clamp_val(get_unaligned_be16(data), > + PMS7003_PM_MIN, PMS7003_PM_MAX); > +} > + > +static irqreturn_t pms7003_trigger_handler(int irq, void *p) > +{ > + struct iio_poll_func *pf = p; > + struct iio_dev *indio_dev = pf->indio_dev; > + struct pms7003_state *state = iio_priv(indio_dev); > + struct pms7003_frame *frame = &state->frame; > + u16 data[3 + 1 + 4]; /* PM1, PM2P5, PM10, padding, timestamp */ > + int ret; > + > + mutex_lock(&state->lock); > + ret = pms7003_do_cmd(state, CMD_READ_PASSIVE); > + if (ret) { > + mutex_unlock(&state->lock); > + goto err; > + } > + > + data[PM1] = pms7003_get_pm(frame->data + PMS7003_PM1_OFFSET); > + data[PM2P5] = pms7003_get_pm(frame->data + PMS7003_PM2P5_OFFSET); > + data[PM10] = pms7003_get_pm(frame->data + PMS7003_PM10_OFFSET); > + mutex_unlock(&state->lock); > + > + iio_push_to_buffers_with_timestamp(indio_dev, data, > + iio_get_time_ns(indio_dev)); > +err: > + iio_trigger_notify_done(indio_dev->trig); > + > + return IRQ_HANDLED; > +} > + > +static int pms7003_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct pms7003_state *state = iio_priv(indio_dev); > + struct pms7003_frame *frame = &state->frame; > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_PROCESSED: > + switch (chan->type) { > + case IIO_MASSCONCENTRATION: > + mutex_lock(&state->lock); > + ret = pms7003_do_cmd(state, CMD_READ_PASSIVE); > + if (ret) { > + mutex_unlock(&state->lock); > + return ret; > + } > + > + *val = pms7003_get_pm(frame->data + chan->address); > + mutex_unlock(&state->lock); > + > + return IIO_VAL_INT; > + default: > + return -EINVAL; > + } > + } > + > + return -EINVAL; > +} > + > +static const struct iio_info pms7003_info = { > + .read_raw = pms7003_read_raw, > +}; > + > +#define PMS7003_CHAN(_index, _mod, _addr) { \ > + .type = IIO_MASSCONCENTRATION, \ > + .modified = 1, \ > + .channel2 = IIO_MOD_ ## _mod, \ > + .address = _addr, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ > + .scan_index = _index, \ > + .scan_type = { \ > + .sign = 'u', \ > + .realbits = 10, \ > + .storagebits = 16, \ > + .endianness = IIO_CPU, \ > + }, \ > +} > + > +static const struct iio_chan_spec pms7003_channels[] = { > + PMS7003_CHAN(0, PM1, PMS7003_PM1_OFFSET), > + PMS7003_CHAN(1, PM2P5, PMS7003_PM2P5_OFFSET), > + PMS7003_CHAN(2, PM10, PMS7003_PM10_OFFSET), > + IIO_CHAN_SOFT_TIMESTAMP(3), > +}; > + > +static u16 pms7003_calc_checksum(struct pms7003_frame *frame) > +{ > + u16 checksum = (PMS7003_MAGIC >> 8) + (u8)PMS7003_MAGIC + > + (frame->length >> 8) + (u8)frame->length; > + int i; > + > + for (i = 0; i < frame->length - PMS7003_CHECKSUM_LENGTH; i++) > + checksum += frame->data[i]; > + > + return checksum; > +} > + > +static bool pms7003_frame_is_okay(struct pms7003_frame *frame) > +{ > + int offset = frame->length - PMS7003_CHECKSUM_LENGTH; > + u16 checksum = get_unaligned_be16(frame->data + offset); > + > + return checksum == pms7003_calc_checksum(frame); > +} > + > +static int pms7003_receive_buf(struct serdev_device *serdev, > + const unsigned char *buf, size_t size) > +{ > + struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev); > + struct pms7003_state *state = iio_priv(indio_dev); > + struct pms7003_frame *frame = &state->frame; > + int num; > + > + if (!frame->expected_length) { > + u16 magic; > + > + /* wait for SOF and data length */ > + if (size < 4) > + return 0; > + > + magic = get_unaligned_be16(buf); > + if (magic != PMS7003_MAGIC) > + return 2; > + > + num = get_unaligned_be16(buf + 2); > + if (num <= PMS7003_MAX_DATA_LENGTH) { > + frame->expected_length = num; > + frame->length = 0; > + } > + > + return 4; > + } > + > + num = min(size, (size_t)(frame->expected_length - frame->length)); > + memcpy(frame->data + frame->length, buf, num); > + frame->length += num; > + > + if (frame->length == frame->expected_length) { > + if (pms7003_frame_is_okay(frame)) > + complete(&state->frame_ready); > + > + frame->expected_length = 0; > + } > + > + return num; > +} > + > +static const struct serdev_device_ops pms7003_serdev_ops = { > + .receive_buf = pms7003_receive_buf, > + .write_wakeup = serdev_device_write_wakeup, > +}; > + > +static void pms7003_stop(void *data) > +{ > + struct pms7003_state *state = data; > + > + pms7003_do_cmd(state, CMD_SLEEP); > +} > + > +static const unsigned long pms7003_scan_masks[] = { 0x07, 0x00 }; > + > +static int pms7003_probe(struct serdev_device *serdev) > +{ > + struct pms7003_state *state; > + struct iio_dev *indio_dev; > + int ret; > + > + indio_dev = devm_iio_device_alloc(&serdev->dev, sizeof(*state)); > + if (!indio_dev) > + return -ENOMEM; > + > + state = iio_priv(indio_dev); > + serdev_device_set_drvdata(serdev, indio_dev); > + state->serdev = serdev; > + indio_dev->dev.parent = &serdev->dev; > + indio_dev->info = &pms7003_info; > + indio_dev->name = PMS7003_DRIVER_NAME; > + indio_dev->channels = pms7003_channels, > + indio_dev->num_channels = ARRAY_SIZE(pms7003_channels); > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->available_scan_masks = pms7003_scan_masks; > + > + mutex_init(&state->lock); > + init_completion(&state->frame_ready); > + > + serdev_device_set_client_ops(serdev, &pms7003_serdev_ops); > + ret = devm_serdev_device_open(&serdev->dev, serdev); > + if (ret) > + return ret; > + > + serdev_device_set_baudrate(serdev, 9600); > + serdev_device_set_flow_control(serdev, false); > + > + ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); > + if (ret) > + return ret; > + > + ret = pms7003_do_cmd(state, CMD_WAKEUP); > + if (ret) { > + dev_err(&serdev->dev, "failed to wakeup sensor\n"); > + return ret; > + } > + > + ret = pms7003_do_cmd(state, CMD_ENTER_PASSIVE_MODE); > + if (ret) { > + dev_err(&serdev->dev, "failed to enter passive mode\n"); > + return ret; > + } > + > + ret = devm_add_action_or_reset(&serdev->dev, pms7003_stop, state); > + if (ret) > + return ret; > + > + ret = devm_iio_triggered_buffer_setup(&serdev->dev, indio_dev, NULL, > + pms7003_trigger_handler, NULL); > + if (ret) > + return ret; > + > + return devm_iio_device_register(&serdev->dev, indio_dev); > +} > + > +static const struct of_device_id pms7003_of_match[] = { > + { .compatible = "plantower,pms7003" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, pms7003_of_match); > + > +static struct serdev_device_driver pms7003_driver = { > + .driver = { > + .name = PMS7003_DRIVER_NAME, > + .of_match_table = pms7003_of_match, > + }, > + .probe = pms7003_probe, > +}; > +module_serdev_device_driver(pms7003_driver); > + > +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); > +MODULE_DESCRIPTION("Plantower PMS7003 particulate matter sensor driver"); > +MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index 57832b4360e9..d5d146e9e372 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -61,6 +61,16 @@ config IAQCORE iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) sensors +config PMS7003 + tristate "Plantower PMS7003 particulate matter sensor" + depends on SERIAL_DEV_BUS + help + Say Y here to build support for the Plantower PMS7003 particulate + matter sensor. + + To compile this driver as a module, choose M here: the module will + be called pms7003. + config SPS30 tristate "SPS30 particulate matter sensor" depends on I2C diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile index 65bf0f89c0e4..f5d1365acb49 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o obj-$(CONFIG_BME680_SPI) += bme680_spi.o obj-$(CONFIG_CCS811) += ccs811.o obj-$(CONFIG_IAQCORE) += ams-iaq-core.o +obj-$(CONFIG_PMS7003) += pms7003.o obj-$(CONFIG_SENSIRION_SGP30) += sgp30.o obj-$(CONFIG_SPS30) += sps30.o obj-$(CONFIG_VZ89X) += vz89x.o diff --git a/drivers/iio/chemical/pms7003.c b/drivers/iio/chemical/pms7003.c new file mode 100644 index 000000000000..0c913c60adde --- /dev/null +++ b/drivers/iio/chemical/pms7003.c @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Plantower PMS7003 particulate matter sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + */ + +#include <asm/unaligned.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/serdev.h> + +#define PMS7003_DRIVER_NAME "pms7003" + +#define PMS7003_MAGIC 0x424d +/* last 2 data bytes hold frame checksum */ +#define PMS7003_MAX_DATA_LENGTH 28 +#define PMS7003_CHECKSUM_LENGTH 2 +#define PMS7003_PM10_OFFSET 10 +#define PMS7003_PM2P5_OFFSET 8 +#define PMS7003_PM1_OFFSET 6 + +#define PMS7003_TIMEOUT msecs_to_jiffies(6000) +#define PMS7003_CMD_LENGTH 7 +#define PMS7003_PM_MAX 1000 +#define PMS7003_PM_MIN 0 + +enum { + PM1, + PM2P5, + PM10, +}; + +enum pms7003_cmd { + CMD_WAKEUP, + CMD_ENTER_PASSIVE_MODE, + CMD_READ_PASSIVE, + CMD_SLEEP, +}; + +/* + * commands have following format: + * + * +------+------+-----+------+-----+-----------+-----------+ + * | 0x42 | 0x4d | cmd | 0x00 | arg | cksum msb | cksum lsb | + * +------+------+-----+------+-----+-----------+-----------+ + */ +static const u8 pms7003_cmd_tbl[][PMS7003_CMD_LENGTH] = { + [CMD_WAKEUP] = { 0x42, 0x4d, 0xe4, 0x00, 0x01, 0x01, 0x74 }, + [CMD_ENTER_PASSIVE_MODE] = { 0x42, 0x4d, 0xe1, 0x00, 0x00, 0x01, 0x70 }, + [CMD_READ_PASSIVE] = { 0x42, 0x4d, 0xe2, 0x00, 0x00, 0x01, 0x71 }, + [CMD_SLEEP] = { 0x42, 0x4d, 0xe4, 0x00, 0x00, 0x01, 0x73 }, +}; + +struct pms7003_frame { + u8 data[PMS7003_MAX_DATA_LENGTH]; + u16 expected_length; + u16 length; +}; + +struct pms7003_state { + struct serdev_device *serdev; + struct pms7003_frame frame; + struct completion frame_ready; + struct mutex lock; /* must be held whenever state gets touched */ +}; + +static int pms7003_do_cmd(struct pms7003_state *state, enum pms7003_cmd cmd) +{ + int ret; + + ret = serdev_device_write(state->serdev, pms7003_cmd_tbl[cmd], + PMS7003_CMD_LENGTH, PMS7003_TIMEOUT); + if (ret < PMS7003_CMD_LENGTH) + return ret < 0 ? ret : -EIO; + + ret = wait_for_completion_interruptible_timeout(&state->frame_ready, + PMS7003_TIMEOUT); + if (!ret) + ret = -ETIMEDOUT; + + return ret < 0 ? ret : 0; +} + +static u16 pms7003_get_pm(const u8 *data) +{ + return clamp_val(get_unaligned_be16(data), + PMS7003_PM_MIN, PMS7003_PM_MAX); +} + +static irqreturn_t pms7003_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + u16 data[3 + 1 + 4]; /* PM1, PM2P5, PM10, padding, timestamp */ + int ret; + + mutex_lock(&state->lock); + ret = pms7003_do_cmd(state, CMD_READ_PASSIVE); + if (ret) { + mutex_unlock(&state->lock); + goto err; + } + + data[PM1] = pms7003_get_pm(frame->data + PMS7003_PM1_OFFSET); + data[PM2P5] = pms7003_get_pm(frame->data + PMS7003_PM2P5_OFFSET); + data[PM10] = pms7003_get_pm(frame->data + PMS7003_PM10_OFFSET); + mutex_unlock(&state->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, data, + iio_get_time_ns(indio_dev)); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int pms7003_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_MASSCONCENTRATION: + mutex_lock(&state->lock); + ret = pms7003_do_cmd(state, CMD_READ_PASSIVE); + if (ret) { + mutex_unlock(&state->lock); + return ret; + } + + *val = pms7003_get_pm(frame->data + chan->address); + mutex_unlock(&state->lock); + + return IIO_VAL_INT; + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +static const struct iio_info pms7003_info = { + .read_raw = pms7003_read_raw, +}; + +#define PMS7003_CHAN(_index, _mod, _addr) { \ + .type = IIO_MASSCONCENTRATION, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _mod, \ + .address = _addr, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 10, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec pms7003_channels[] = { + PMS7003_CHAN(0, PM1, PMS7003_PM1_OFFSET), + PMS7003_CHAN(1, PM2P5, PMS7003_PM2P5_OFFSET), + PMS7003_CHAN(2, PM10, PMS7003_PM10_OFFSET), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static u16 pms7003_calc_checksum(struct pms7003_frame *frame) +{ + u16 checksum = (PMS7003_MAGIC >> 8) + (u8)PMS7003_MAGIC + + (frame->length >> 8) + (u8)frame->length; + int i; + + for (i = 0; i < frame->length - PMS7003_CHECKSUM_LENGTH; i++) + checksum += frame->data[i]; + + return checksum; +} + +static bool pms7003_frame_is_okay(struct pms7003_frame *frame) +{ + int offset = frame->length - PMS7003_CHECKSUM_LENGTH; + u16 checksum = get_unaligned_be16(frame->data + offset); + + return checksum == pms7003_calc_checksum(frame); +} + +static int pms7003_receive_buf(struct serdev_device *serdev, + const unsigned char *buf, size_t size) +{ + struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev); + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + int num; + + if (!frame->expected_length) { + u16 magic; + + /* wait for SOF and data length */ + if (size < 4) + return 0; + + magic = get_unaligned_be16(buf); + if (magic != PMS7003_MAGIC) + return 2; + + num = get_unaligned_be16(buf + 2); + if (num <= PMS7003_MAX_DATA_LENGTH) { + frame->expected_length = num; + frame->length = 0; + } + + return 4; + } + + num = min(size, (size_t)(frame->expected_length - frame->length)); + memcpy(frame->data + frame->length, buf, num); + frame->length += num; + + if (frame->length == frame->expected_length) { + if (pms7003_frame_is_okay(frame)) + complete(&state->frame_ready); + + frame->expected_length = 0; + } + + return num; +} + +static const struct serdev_device_ops pms7003_serdev_ops = { + .receive_buf = pms7003_receive_buf, + .write_wakeup = serdev_device_write_wakeup, +}; + +static void pms7003_stop(void *data) +{ + struct pms7003_state *state = data; + + pms7003_do_cmd(state, CMD_SLEEP); +} + +static const unsigned long pms7003_scan_masks[] = { 0x07, 0x00 }; + +static int pms7003_probe(struct serdev_device *serdev) +{ + struct pms7003_state *state; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&serdev->dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + state = iio_priv(indio_dev); + serdev_device_set_drvdata(serdev, indio_dev); + state->serdev = serdev; + indio_dev->dev.parent = &serdev->dev; + indio_dev->info = &pms7003_info; + indio_dev->name = PMS7003_DRIVER_NAME; + indio_dev->channels = pms7003_channels, + indio_dev->num_channels = ARRAY_SIZE(pms7003_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = pms7003_scan_masks; + + mutex_init(&state->lock); + init_completion(&state->frame_ready); + + serdev_device_set_client_ops(serdev, &pms7003_serdev_ops); + ret = devm_serdev_device_open(&serdev->dev, serdev); + if (ret) + return ret; + + serdev_device_set_baudrate(serdev, 9600); + serdev_device_set_flow_control(serdev, false); + + ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); + if (ret) + return ret; + + ret = pms7003_do_cmd(state, CMD_WAKEUP); + if (ret) { + dev_err(&serdev->dev, "failed to wakeup sensor\n"); + return ret; + } + + ret = pms7003_do_cmd(state, CMD_ENTER_PASSIVE_MODE); + if (ret) { + dev_err(&serdev->dev, "failed to enter passive mode\n"); + return ret; + } + + ret = devm_add_action_or_reset(&serdev->dev, pms7003_stop, state); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(&serdev->dev, indio_dev, NULL, + pms7003_trigger_handler, NULL); + if (ret) + return ret; + + return devm_iio_device_register(&serdev->dev, indio_dev); +} + +static const struct of_device_id pms7003_of_match[] = { + { .compatible = "plantower,pms7003" }, + { } +}; +MODULE_DEVICE_TABLE(of, pms7003_of_match); + +static struct serdev_device_driver pms7003_driver = { + .driver = { + .name = PMS7003_DRIVER_NAME, + .of_match_table = pms7003_of_match, + }, + .probe = pms7003_probe, +}; +module_serdev_device_driver(pms7003_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("Plantower PMS7003 particulate matter sensor driver"); +MODULE_LICENSE("GPL v2");
Add support for Plantower PMS7003 particulate matter sensor. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> --- drivers/iio/chemical/Kconfig | 10 + drivers/iio/chemical/Makefile | 1 + drivers/iio/chemical/pms7003.c | 340 +++++++++++++++++++++++++++++++++ 3 files changed, 351 insertions(+) create mode 100644 drivers/iio/chemical/pms7003.c