| Message ID | 20190313184002.2501-3-rui.silva@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: gyro: add fxas21002c driver | expand |
On Wed, 13 Mar 2019 18:39:58 +0000 Rui Miguel Silva <rui.silva@linaro.org> wrote: > Add core support for the NXP fxas21002c Tri-axis gyroscope, > using the iio subsystem. It supports PM operations, axis reading, > temperature, scale factor of the axis, high pass and low pass > filtering, and sampling frequency selection. > > It will have extras modules to support the communication over i2c and > spi. > > Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> A few additional minor comments, but basically good. > --- > drivers/iio/gyro/Kconfig | 11 + > drivers/iio/gyro/Makefile | 1 + > drivers/iio/gyro/fxas21002c.h | 151 +++++ > drivers/iio/gyro/fxas21002c_core.c | 989 +++++++++++++++++++++++++++++ > 4 files changed, 1152 insertions(+) > create mode 100644 drivers/iio/gyro/fxas21002c.h > create mode 100644 drivers/iio/gyro/fxas21002c_core.c > > diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig > index 3126cf05e6b9..cfd2cf44bac8 100644 > --- a/drivers/iio/gyro/Kconfig > +++ b/drivers/iio/gyro/Kconfig > @@ -73,6 +73,17 @@ config BMG160_SPI > tristate > select REGMAP_SPI > > +config FXAS21002C > + tristate "NXP FXAS21002C Gyro Sensor" > + select IIO_BUFFER > + select IIO_TRIGGERED_BUFFER > + help > + Say yes here to build support for NXP FXAS21002C Tri-axis Gyro > + Sensor driver connected via I2C or SPI. > + > + This driver can also be built as a module. If so, the module > + will be called fxas21002c_i2c or fxas21002c_spi. > + > config HID_SENSOR_GYRO_3D > depends on HID_SENSOR_HUB > select IIO_BUFFER > diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile > index 295ec780c4eb..247dc600a602 100644 > --- a/drivers/iio/gyro/Makefile > +++ b/drivers/iio/gyro/Makefile > @@ -12,6 +12,7 @@ obj-$(CONFIG_ADXRS450) += adxrs450.o > obj-$(CONFIG_BMG160) += bmg160_core.o > obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o > obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o > +obj-$(CONFIG_FXAS21002C) += fxas21002c_core.o > > obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o > > diff --git a/drivers/iio/gyro/fxas21002c.h b/drivers/iio/gyro/fxas21002c.h > new file mode 100644 > index 000000000000..e21fd410950c > --- /dev/null > +++ b/drivers/iio/gyro/fxas21002c.h > @@ -0,0 +1,151 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Driver for NXP FXAS21002C Gyroscope - Header > + * > + * Copyright (C) 2019 Linaro Ltd. > + * > + */ > + > +#ifndef FXAS21002C_H_ > +#define FXAS21002C_H_ > + > +#include <linux/regmap.h> > + > +#define FXAS21002C_REG_STATUS 0x00 > +#define FXAS21002C_REG_OUT_X_MSB 0x01 > +#define FXAS21002C_REG_OUT_X_LSB 0x02 > +#define FXAS21002C_REG_OUT_Y_MSB 0x03 > +#define FXAS21002C_REG_OUT_Y_LSB 0x04 > +#define FXAS21002C_REG_OUT_Z_MSB 0x05 > +#define FXAS21002C_REG_OUT_Z_LSB 0x06 > +#define FXAS21002C_REG_DR_STATUS 0x07 > +#define FXAS21002C_REG_F_STATUS 0x08 > +#define FXAS21002C_REG_F_SETUP 0x09 > +#define FXAS21002C_REG_F_EVENT 0x0A > +#define FXAS21002C_REG_INT_SRC_FLAG 0x0B > +#define FXAS21002C_REG_WHO_AM_I 0x0C > +#define FXAS21002C_REG_CTRL0 0x0D > +#define FXAS21002C_REG_RT_CFG 0x0E > +#define FXAS21002C_REG_RT_SRC 0x0F > +#define FXAS21002C_REG_RT_THS 0x10 > +#define FXAS21002C_REG_RT_COUNT 0x11 > +#define FXAS21002C_REG_TEMP 0x12 > +#define FXAS21002C_REG_CTRL1 0x13 > +#define FXAS21002C_REG_CTRL2 0x14 > +#define FXAS21002C_REG_CTRL3 0x15 > + > +enum fxas21002c_fields { > + F_DR_STATUS, > + F_OUT_X_MSB, > + F_OUT_X_LSB, > + F_OUT_Y_MSB, > + F_OUT_Y_LSB, > + F_OUT_Z_MSB, > + F_OUT_Z_LSB, > + /* DR_STATUS */ > + F_ZYX_OW, F_Z_OW, F_Y_OW, F_X_OW, F_ZYX_DR, F_Z_DR, F_Y_DR, F_X_DR, > + /* F_STATUS */ > + F_OVF, F_WMKF, F_CNT, > + /* F_SETUP */ > + F_MODE, F_WMRK, > + /* F_EVENT */ > + F_EVENT, FE_TIME, > + /* INT_SOURCE_FLAG */ > + F_BOOTEND, F_SRC_FIFO, F_SRC_RT, F_SRC_DRDY, > + /* WHO_AM_I */ > + F_WHO_AM_I, > + /* CTRL_REG0 */ > + F_BW, F_SPIW, F_SEL, F_HPF_EN, F_FS, > + /* RT_CFG */ > + F_ELE, F_ZTEFE, F_YTEFE, F_XTEFE, > + /* RT_SRC */ > + F_EA, F_ZRT, F_ZRT_POL, F_YRT, F_YRT_POL, F_XRT, F_XRT_POL, > + /* RT_THS */ > + F_DBCNTM, F_THS, > + /* RT_COUNT */ > + F_RT_COUNT, > + /* TEMP */ > + F_TEMP, > + /* CTRL_REG1 */ > + F_RST, F_ST, F_DR, F_ACTIVE, F_READY, > + /* CTRL_REG2 */ > + F_INT_CFG_FIFO, F_INT_EN_FIFO, F_INT_CFG_RT, F_INT_EN_RT, > + F_INT_CFG_DRDY, F_INT_EN_DRDY, F_IPOL, F_PP_OD, > + /* CTRL_REG3 */ > + F_WRAPTOONE, F_EXTCTRLEN, F_FS_DOUBLE, > + /* MAX FIELDS */ > + F_MAX_FIELDS, > +}; > + > +static const struct reg_field fxas21002c_reg_fields[] = { > + [F_DR_STATUS] = REG_FIELD(FXAS21002C_REG_STATUS, 0, 7), > + [F_OUT_X_MSB] = REG_FIELD(FXAS21002C_REG_OUT_X_MSB, 0, 7), > + [F_OUT_X_LSB] = REG_FIELD(FXAS21002C_REG_OUT_X_LSB, 0, 7), > + [F_OUT_Y_MSB] = REG_FIELD(FXAS21002C_REG_OUT_Y_MSB, 0, 7), > + [F_OUT_Y_LSB] = REG_FIELD(FXAS21002C_REG_OUT_Y_LSB, 0, 7), > + [F_OUT_Z_MSB] = REG_FIELD(FXAS21002C_REG_OUT_Z_MSB, 0, 7), > + [F_OUT_Z_LSB] = REG_FIELD(FXAS21002C_REG_OUT_Z_LSB, 0, 7), > + [F_ZYX_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 7, 7), > + [F_Z_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 6, 6), > + [F_Y_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 5, 5), > + [F_X_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 4, 4), > + [F_ZYX_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 3, 3), > + [F_Z_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 2, 2), > + [F_Y_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 1, 1), > + [F_X_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 0, 0), > + [F_OVF] = REG_FIELD(FXAS21002C_REG_F_STATUS, 7, 7), > + [F_WMKF] = REG_FIELD(FXAS21002C_REG_F_STATUS, 6, 6), > + [F_CNT] = REG_FIELD(FXAS21002C_REG_F_STATUS, 0, 5), > + [F_MODE] = REG_FIELD(FXAS21002C_REG_F_SETUP, 6, 7), > + [F_WMRK] = REG_FIELD(FXAS21002C_REG_F_SETUP, 0, 5), > + [F_EVENT] = REG_FIELD(FXAS21002C_REG_F_EVENT, 5, 5), > + [FE_TIME] = REG_FIELD(FXAS21002C_REG_F_EVENT, 0, 4), > + [F_BOOTEND] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 3, 3), > + [F_SRC_FIFO] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 2, 2), > + [F_SRC_RT] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 1, 1), > + [F_SRC_DRDY] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 0, 0), > + [F_WHO_AM_I] = REG_FIELD(FXAS21002C_REG_WHO_AM_I, 0, 7), > + [F_BW] = REG_FIELD(FXAS21002C_REG_CTRL0, 6, 7), > + [F_SPIW] = REG_FIELD(FXAS21002C_REG_CTRL0, 5, 5), > + [F_SEL] = REG_FIELD(FXAS21002C_REG_CTRL0, 3, 4), > + [F_HPF_EN] = REG_FIELD(FXAS21002C_REG_CTRL0, 2, 2), > + [F_FS] = REG_FIELD(FXAS21002C_REG_CTRL0, 0, 1), > + [F_ELE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 3, 3), > + [F_ZTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 2, 2), > + [F_YTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 1, 1), > + [F_XTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 0, 0), > + [F_EA] = REG_FIELD(FXAS21002C_REG_RT_SRC, 6, 6), > + [F_ZRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, 5, 5), > + [F_ZRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, 4, 4), > + [F_YRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, 3, 3), > + [F_YRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, 2, 2), > + [F_XRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, 1, 1), > + [F_XRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, 0, 0), > + [F_DBCNTM] = REG_FIELD(FXAS21002C_REG_RT_THS, 7, 7), > + [F_THS] = REG_FIELD(FXAS21002C_REG_RT_SRC, 0, 6), > + [F_RT_COUNT] = REG_FIELD(FXAS21002C_REG_RT_COUNT, 0, 7), > + [F_TEMP] = REG_FIELD(FXAS21002C_REG_TEMP, 0, 7), > + [F_RST] = REG_FIELD(FXAS21002C_REG_CTRL1, 6, 6), > + [F_ST] = REG_FIELD(FXAS21002C_REG_CTRL1, 5, 5), > + [F_DR] = REG_FIELD(FXAS21002C_REG_CTRL1, 2, 4), > + [F_ACTIVE] = REG_FIELD(FXAS21002C_REG_CTRL1, 1, 1), > + [F_READY] = REG_FIELD(FXAS21002C_REG_CTRL1, 0, 0), > + [F_INT_CFG_FIFO] = REG_FIELD(FXAS21002C_REG_CTRL2, 7, 7), > + [F_INT_EN_FIFO] = REG_FIELD(FXAS21002C_REG_CTRL2, 6, 6), > + [F_INT_CFG_RT] = REG_FIELD(FXAS21002C_REG_CTRL2, 5, 5), > + [F_INT_EN_RT] = REG_FIELD(FXAS21002C_REG_CTRL2, 4, 4), > + [F_INT_CFG_DRDY] = REG_FIELD(FXAS21002C_REG_CTRL2, 3, 3), > + [F_INT_EN_DRDY] = REG_FIELD(FXAS21002C_REG_CTRL2, 2, 2), > + [F_IPOL] = REG_FIELD(FXAS21002C_REG_CTRL2, 1, 1), > + [F_PP_OD] = REG_FIELD(FXAS21002C_REG_CTRL2, 0, 0), > + [F_WRAPTOONE] = REG_FIELD(FXAS21002C_REG_CTRL3, 3, 3), > + [F_EXTCTRLEN] = REG_FIELD(FXAS21002C_REG_CTRL3, 2, 2), > + [F_FS_DOUBLE] = REG_FIELD(FXAS21002C_REG_CTRL3, 0, 0), > +}; > + > +extern const struct dev_pm_ops fxas21002c_pm_ops; > + > +int fxas21002c_core_probe(struct device *dev, struct regmap *regmap, int irq, > + const char *name); > +void fxas21002c_core_remove(struct device *dev); > +#endif > diff --git a/drivers/iio/gyro/fxas21002c_core.c b/drivers/iio/gyro/fxas21002c_core.c > new file mode 100644 > index 000000000000..dccded203dd5 > --- /dev/null > +++ b/drivers/iio/gyro/fxas21002c_core.c > @@ -0,0 +1,989 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Driver for NXP FXAS21002C Gyroscope - Core > + * > + * Copyright (C) 2019 Linaro Ltd. > + */ > + > +#include <linux/interrupt.h> > +#include <linux/module.h> > +#include <linux/of_irq.h> > +#include <linux/pm.h> > +#include <linux/pm_runtime.h> > +#include <linux/regmap.h> > +#include <linux/regulator/consumer.h> > + > +#include <linux/iio/events.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/buffer.h> > +#include <linux/iio/sysfs.h> > +#include <linux/iio/trigger.h> > +#include <linux/iio/trigger_consumer.h> > +#include <linux/iio/triggered_buffer.h> > + > +#include "fxas21002c.h" > + > +#define FXAS21002C_CHIP_ID_1 0xD6 > +#define FXAS21002C_CHIP_ID_2 0xD7 > + > +enum fxas21002c_mode_state { > + FXAS21002C_MODE_STANDBY, > + FXAS21002C_MODE_READY, > + FXAS21002C_MODE_ACTIVE, > +}; > + > +#define FXAS21002C_STANDBY_ACTIVE_TIME_MS 62 > +#define FXAS21002C_READY_ACTIVE_TIME_MS 7 > + > +#define FXAS21002C_ODR_LIST_MAX 10 > + > +#define FXAS21002C_SCALE_FRACTIONAL 32 > +#define FXAS21002C_RANGE_LIMIT_DOUBLE 2000 > + > +#define FXAS21002C_AXIS_TO_REG(axis) (FXAS21002C_REG_OUT_X_MSB + ((axis) * 2)) > + > +static const int fxas21002c_odr_values[] = { > + 800, 400, 200, 100, 50, 25, 12, 12 > +}; > + > +/* > + * These values are taken from the low-pass filter cutoff frequency calculated > + * ODR * 0.lpf_values. So, for ODR = 800Hz with a lpf value = 0.32 > + * => LPF cutoff frequency = 800 * 0.32 = 256 Hz > + */ > +static const int fxas21002c_lpf_values[] = { > + 32, 16, 8 > +}; > + > +/* > + * These values are taken from the high-pass filter cutoff frequency calculated > + * ODR * 0.0hpf_values. So, for ODR = 800Hz with a hpf value = 0.018750 > + * => HPF cutoff frequency = 800 * 0.018750 = 15 Hz > + */ > +static const int fxas21002c_hpf_values[] = { > + 18750, 9625, 4875, 2475 > +}; > + > +static const int fxas21002c_range_values[] = { > + 4000, 2000, 1000, 500, 250 > +}; > + > +struct fxas21002c_data { > + u8 chip_id; > + enum fxas21002c_mode_state mode; > + enum fxas21002c_mode_state prev_mode; > + > + struct mutex lock; /* serialize data access */ > + struct regmap *regmap; > + struct regmap_field *regmap_fields[F_MAX_FIELDS]; > + struct iio_trigger *dready_trig; > + int irq; > + > + struct regulator *vdd; > + struct regulator *vddio; > + > + /* > + * DMA (thus cache coherency maintenance) requires the > + * transfer buffers to live in their own cache lines. > + */ > + s16 buffer[8] ____cacheline_aligned; > +}; > + > +enum fxas21002c_channel_index { > + CHANNEL_SCAN_INDEX_X, > + CHANNEL_SCAN_INDEX_Y, > + CHANNEL_SCAN_INDEX_Z, > + CHANNEL_SCAN_MAX, > +}; > + > +static int fxas21002c_odr_hz_from_value(struct fxas21002c_data *data, u8 value) > +{ > + int odr_value_max = ARRAY_SIZE(fxas21002c_odr_values) - 1; > + > + value = min_t(u8, value, odr_value_max); > + > + return fxas21002c_odr_values[value]; > +} > + > +static int fxas21002c_odr_value_from_hz(struct fxas21002c_data *data, > + unsigned int hz) > +{ > + int odr_table_size = ARRAY_SIZE(fxas21002c_odr_values); > + int i; > + > + for (i = 0; i < odr_table_size; i++) > + if (fxas21002c_odr_values[i] == hz) > + return i; > + > + return -EINVAL; > +} > + > +static int fxas21002c_lpf_bw_from_value(struct fxas21002c_data *data, u8 value) > +{ > + int lpf_value_max = ARRAY_SIZE(fxas21002c_lpf_values) - 1; > + > + value = min_t(u8, value, lpf_value_max); > + > + return fxas21002c_lpf_values[value]; > +} > + > +static int fxas21002c_lpf_value_from_bw(struct fxas21002c_data *data, > + unsigned int hz) > +{ > + int lpf_table_size = ARRAY_SIZE(fxas21002c_lpf_values); > + int i; > + > + for (i = 0; i < lpf_table_size; i++) > + if (fxas21002c_lpf_values[i] == hz) > + return i; > + > + return -EINVAL; > +} > + > +static int fxas21002c_hpf_sel_from_value(struct fxas21002c_data *data, u8 value) > +{ > + int hpf_value_max = ARRAY_SIZE(fxas21002c_hpf_values) - 1; > + > + value = min_t(u8, value, hpf_value_max); > + > + return fxas21002c_hpf_values[value]; > +} > + > +static int fxas21002c_hpf_value_from_sel(struct fxas21002c_data *data, > + unsigned int hz) > +{ > + int hpf_table_size = ARRAY_SIZE(fxas21002c_hpf_values); > + int i; > + > + for (i = 0; i < hpf_table_size; i++) > + if (fxas21002c_hpf_values[i] == hz) > + return i; > + > + return -EINVAL; > +} > + > +static int fxas21002c_range_fs_from_value(struct fxas21002c_data *data, > + u8 value) > +{ > + int range_value_max = ARRAY_SIZE(fxas21002c_range_values) - 1; > + unsigned int fs_double; > + int ret; > + > + /* We need to check if FS_DOUBLE is enabled to offset the value */ > + ret = regmap_field_read(data->regmap_fields[F_FS_DOUBLE], &fs_double); > + if (ret < 0) > + return ret; > + > + if (!fs_double) > + value += 1; > + > + value = min_t(u8, value, range_value_max); > + > + return fxas21002c_range_values[value]; > +} > + > +static int fxas21002c_range_value_from_fs(struct fxas21002c_data *data, > + unsigned int range) > +{ > + int range_table_size = ARRAY_SIZE(fxas21002c_range_values); > + bool found = false; > + int fs_double = 0; > + int ret; > + int i; > + > + for (i = 0; i < range_table_size; i++) > + if (fxas21002c_range_values[i] == range) { > + found = true; > + break; > + } > + > + if (!found) > + return -EINVAL; > + > + if (range > FXAS21002C_RANGE_LIMIT_DOUBLE) > + fs_double = 1; > + > + ret = regmap_field_write(data->regmap_fields[F_FS_DOUBLE], fs_double); > + if (ret < 0) > + return ret; > + > + return i; > +} > + > +static int fxas21002c_mode_get(struct fxas21002c_data *data) > +{ > + unsigned int active; > + unsigned int ready; > + int ret; > + > + ret = regmap_field_read(data->regmap_fields[F_ACTIVE], &active); > + if (ret < 0) > + return ret; > + if (active) > + return FXAS21002C_MODE_ACTIVE; > + > + ret = regmap_field_read(data->regmap_fields[F_READY], &ready); > + if (ret < 0) > + return ret; > + if (ready) > + return FXAS21002C_MODE_READY; > + > + return FXAS21002C_MODE_STANDBY; > +} > + > +static int fxas21002c_mode_set(struct fxas21002c_data *data, > + enum fxas21002c_mode_state mode) > +{ > + int ret; > + > + if (mode == data->mode) > + return 0; > + > + if (mode == FXAS21002C_MODE_READY) > + ret = regmap_field_write(data->regmap_fields[F_READY], 1); > + else > + ret = regmap_field_write(data->regmap_fields[F_READY], 0); > + if (ret < 0) > + return ret; > + > + if (mode == FXAS21002C_MODE_ACTIVE) > + ret = regmap_field_write(data->regmap_fields[F_ACTIVE], 1); > + else > + ret = regmap_field_write(data->regmap_fields[F_ACTIVE], 0); > + if (ret < 0) > + return ret; > + > + /* if going to active wait the setup times */ > + if (mode == FXAS21002C_MODE_ACTIVE && > + data->mode == FXAS21002C_MODE_STANDBY) > + msleep_interruptible(FXAS21002C_STANDBY_ACTIVE_TIME_MS); > + > + if (data->mode == FXAS21002C_MODE_READY) > + msleep_interruptible(FXAS21002C_READY_ACTIVE_TIME_MS); > + > + data->prev_mode = data->mode; > + data->mode = mode; > + > + return ret; > +} > + > +static int fxas21002c_write(struct fxas21002c_data *data, > + enum fxas21002c_fields field, int bits) > +{ > + int actual_mode; > + int ret; > + > + mutex_lock(&data->lock); > + > + actual_mode = fxas21002c_mode_get(data); > + if (actual_mode < 0) { > + ret = actual_mode; > + goto out_unlock; > + } > + > + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_READY); > + if (ret < 0) > + goto out_unlock; > + > + ret = regmap_field_write(data->regmap_fields[field], bits); > + if (ret < 0) > + goto out_unlock; > + > + ret = fxas21002c_mode_set(data, data->prev_mode); > + > +out_unlock: > + mutex_unlock(&data->lock); > + > + return ret; > +} > + > +static int fxas21002c_pm_get(struct fxas21002c_data *data) > +{ > + struct device *dev = regmap_get_device(data->regmap); > + int ret; > + > + ret = pm_runtime_get_sync(dev); > + if (ret < 0) > + pm_runtime_put_noidle(dev); > + > + return ret; > +} > + > +static int fxas21002c_pm_put(struct fxas21002c_data *data) > +{ > + struct device *dev = regmap_get_device(data->regmap); > + > + pm_runtime_mark_last_busy(dev); > + > + return pm_runtime_put_autosuspend(dev); > +} > + > +static int fxas21002c_temp_get(struct fxas21002c_data *data, int *val) > +{ > + struct device *dev = regmap_get_device(data->regmap); > + unsigned int temp; > + int ret; > + > + mutex_lock(&data->lock); > + ret = fxas21002c_pm_get(data); > + if (ret < 0) > + goto data_unlock; > + > + ret = regmap_field_read(data->regmap_fields[F_TEMP], &temp); > + if (ret < 0) { > + dev_err(dev, "failed to read temp: %d\n", ret); > + goto data_unlock; > + } > + > + *val = sign_extend32(temp, 7); > + > + ret = fxas21002c_pm_put(data); > + if (ret < 0) > + goto data_unlock; > + > + ret = IIO_VAL_INT; > + > +data_unlock: > + mutex_unlock(&data->lock); > + > + return ret; > +} > + > +static int fxas21002c_axis_get(struct fxas21002c_data *data, > + int index, int *val) > +{ > + struct device *dev = regmap_get_device(data->regmap); > + __be16 axis_be; > + int ret; > + > + mutex_lock(&data->lock); > + ret = fxas21002c_pm_get(data); > + if (ret < 0) > + goto data_unlock; > + > + ret = regmap_bulk_read(data->regmap, FXAS21002C_AXIS_TO_REG(index), > + &axis_be, sizeof(axis_be)); > + if (ret < 0) { > + dev_err(dev, "failed to read axis: %d: %d\n", index, ret); > + goto data_unlock; > + } > + > + *val = sign_extend32(be16_to_cpu(axis_be), 15); > + > + ret = fxas21002c_pm_put(data); > + if (ret < 0) > + goto data_unlock; > + > + ret = IIO_VAL_INT; > + > +data_unlock: > + mutex_unlock(&data->lock); > + > + return ret; > +} > + > +static int fxas21002c_odr_get(struct fxas21002c_data *data, int *odr) > +{ > + unsigned int odr_bits; > + int ret; > + > + mutex_lock(&data->lock); > + ret = regmap_field_read(data->regmap_fields[F_DR], &odr_bits); > + if (ret < 0) > + goto data_unlock; > + > + *odr = fxas21002c_odr_hz_from_value(data, odr_bits); > + > + ret = IIO_VAL_INT; > + > +data_unlock: > + mutex_unlock(&data->lock); > + > + return ret; > +} > + > +static int fxas21002c_odr_set(struct fxas21002c_data *data, int odr) > +{ > + int odr_bits; > + > + odr_bits = fxas21002c_odr_value_from_hz(data, odr); > + if (odr_bits < 0) > + return odr_bits; > + > + return fxas21002c_write(data, F_DR, odr_bits); > +} > + > +static int fxas21002c_lpf_get(struct fxas21002c_data *data, int *val2) > +{ > + unsigned int bw_bits; > + int ret; > + > + mutex_lock(&data->lock); > + ret = regmap_field_read(data->regmap_fields[F_BW], &bw_bits); > + if (ret < 0) > + goto data_unlock; > + > + *val2 = fxas21002c_lpf_bw_from_value(data, bw_bits) * 10000; > + > + ret = IIO_VAL_INT_PLUS_MICRO; > + > +data_unlock: > + mutex_unlock(&data->lock); > + > + return ret; > +} > + > +static int fxas21002c_lpf_set(struct fxas21002c_data *data, int bw) > +{ > + int bw_bits; > + int odr; > + int ret; > + > + bw_bits = fxas21002c_lpf_value_from_bw(data, bw); > + if (bw_bits < 0) > + return bw_bits; > + > + /* > + * From table 33 of the device spec, for ODR = 25Hz and 12.5 value 0.08 > + * is not allowed and for ODR = 12.5 value 0.16 is also not allowed > + */ > + ret = fxas21002c_odr_get(data, &odr); > + if (ret < 0) > + return -EINVAL; > + > + if ((odr == 25 && bw_bits > 0x01) || (odr == 12 && bw_bits > 0)) > + return -EINVAL; > + > + return fxas21002c_write(data, F_BW, bw_bits); > +} > + > +static int fxas21002c_hpf_get(struct fxas21002c_data *data, int *val2) > +{ > + unsigned int sel_bits; > + int ret; > + > + mutex_lock(&data->lock); > + ret = regmap_field_read(data->regmap_fields[F_SEL], &sel_bits); > + if (ret < 0) > + goto data_unlock; > + > + *val2 = fxas21002c_hpf_sel_from_value(data, sel_bits); > + > + ret = IIO_VAL_INT_PLUS_MICRO; > + > +data_unlock: > + mutex_unlock(&data->lock); > + > + return ret; > +} > + > +static int fxas21002c_hpf_set(struct fxas21002c_data *data, int sel) > +{ > + int sel_bits; > + > + sel_bits = fxas21002c_hpf_value_from_sel(data, sel); > + if (sel_bits < 0) > + return sel_bits; > + > + return fxas21002c_write(data, F_SEL, sel_bits); > +} > + > +static int fxas21002c_scale_get(struct fxas21002c_data *data, int *val) > +{ > + int fs_bits; > + int scale; > + int ret = 0; > + > + mutex_lock(&data->lock); > + ret = regmap_field_read(data->regmap_fields[F_FS], &fs_bits); > + if (ret < 0) > + goto data_unlock; > + > + scale = fxas21002c_range_fs_from_value(data, fs_bits); > + if (scale < 0) { > + ret = scale; > + goto data_unlock; > + } > + > + *val = scale; > + > +data_unlock: > + mutex_unlock(&data->lock); > + > + return ret; > +} > + > +static int fxas21002c_scale_set(struct fxas21002c_data *data, int range) > +{ > + int fs_bits; > + > + fs_bits = fxas21002c_range_value_from_fs(data, range); > + if (fs_bits < 0) > + return fs_bits; > + > + return fxas21002c_write(data, F_FS, fs_bits); > +} > + > +static int fxas21002c_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int *val, > + int *val2, long mask) > +{ > + struct fxas21002c_data *data = iio_priv(indio_dev); > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + switch (chan->type) { > + case IIO_TEMP: > + return fxas21002c_temp_get(data, val); > + case IIO_ANGL_VEL: > + return fxas21002c_axis_get(data, chan->scan_index, val); > + default: > + return -EINVAL; > + } > + case IIO_CHAN_INFO_SCALE: > + switch (chan->type) { > + case IIO_ANGL_VEL: > + *val2 = FXAS21002C_SCALE_FRACTIONAL; > + ret = fxas21002c_scale_get(data, val); > + if (ret < 0) > + return ret; > + > + return IIO_VAL_FRACTIONAL; > + default: > + return -EINVAL; > + } > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > + *val = 0; > + return fxas21002c_lpf_get(data, val2); > + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: > + *val = 0; > + return fxas21002c_hpf_get(data, val2); > + case IIO_CHAN_INFO_SAMP_FREQ: > + *val2 = 0; > + return fxas21002c_odr_get(data, val); > + default: > + return -EINVAL; > + } > +} > + > +static int fxas21002c_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int val, > + int val2, long mask) > +{ > + struct fxas21002c_data *data = iio_priv(indio_dev); > + int range; > + > + switch (mask) { > + case IIO_CHAN_INFO_SAMP_FREQ: > + if (val2) > + return -EINVAL; > + > + return fxas21002c_odr_set(data, val); > + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: > + if (val) > + return -EINVAL; > + > + val2 = val2 / 10000; > + return fxas21002c_lpf_set(data, val2); > + case IIO_CHAN_INFO_SCALE: > + switch (chan->type) { > + case IIO_ANGL_VEL: > + range = (((val * 1000 + val2 / 1000) * > + FXAS21002C_SCALE_FRACTIONAL) / 1000); > + return fxas21002c_scale_set(data, range); > + default: > + return -EINVAL; > + } > + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: > + return fxas21002c_hpf_set(data, val2); > + default: > + return -EINVAL; > + } > +} > + > +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("12.5 25 50 100 200 400 800"); > + > +static IIO_CONST_ATTR(in_anglvel_filter_low_pass_3db_frequency_available, > + "0.32 0.16 0.08"); > + > +static IIO_CONST_ATTR(in_anglvel_filter_high_pass_3db_frequency_available, > + "0.018750 0.009625 0.004875 0.002475"); > + > +static IIO_CONST_ATTR(in_anglvel_scale_available, > + "125.0 62.5 31.25 15.625 7.8125"); > + > +static struct attribute *fxas21002c_attributes[] = { > + &iio_const_attr_sampling_frequency_available.dev_attr.attr, > + &iio_const_attr_in_anglvel_filter_low_pass_3db_frequency_available.dev_attr.attr, > + &iio_const_attr_in_anglvel_filter_high_pass_3db_frequency_available.dev_attr.attr, > + &iio_const_attr_in_anglvel_scale_available.dev_attr.attr, > + NULL, > +}; > + > +static const struct attribute_group fxas21002c_attrs_group = { > + .attrs = fxas21002c_attributes, > +}; > + > +#define FXAS21002C_CHANNEL(_axis) { \ > + .type = IIO_ANGL_VEL, \ > + .modified = 1, \ > + .channel2 = IIO_MOD_##_axis, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ > + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \ > + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY) | \ > + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ > + .scan_index = CHANNEL_SCAN_INDEX_##_axis, \ > + .scan_type = { \ > + .sign = 's', \ > + .realbits = 16, \ > + .storagebits = 16, \ > + .endianness = IIO_BE, \ > + }, \ > +} > + > +static const struct iio_chan_spec fxas21002c_channels[] = { > + { > + .type = IIO_TEMP, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > + .scan_index = -1, > + }, > + FXAS21002C_CHANNEL(X), > + FXAS21002C_CHANNEL(Y), > + FXAS21002C_CHANNEL(Z), > +}; > + > +static const struct iio_info fxas21002c_info = { > + .attrs = &fxas21002c_attrs_group, > + .read_raw = &fxas21002c_read_raw, > + .write_raw = &fxas21002c_write_raw, > +}; > + > +static irqreturn_t fxas21002c_trigger_handler(int irq, void *p) > +{ > + struct iio_poll_func *pf = p; > + struct iio_dev *indio_dev = pf->indio_dev; > + struct fxas21002c_data *data = iio_priv(indio_dev); > + int ret; > + > + mutex_lock(&data->lock); > + ret = regmap_bulk_read(data->regmap, FXAS21002C_REG_OUT_X_MSB, > + data->buffer, CHANNEL_SCAN_MAX * sizeof(s16)); > + mutex_unlock(&data->lock); > + if (ret < 0) > + goto notify_done; > + > + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, > + pf->timestamp); > + > +notify_done: > + iio_trigger_notify_done(indio_dev->trig); > + > + return IRQ_HANDLED; > +} > + > +static int fxas21002c_chip_init(struct fxas21002c_data *data) > +{ > + struct device *dev = regmap_get_device(data->regmap); > + unsigned int chip_id; > + int ret; > + > + ret = regmap_field_read(data->regmap_fields[F_WHO_AM_I], &chip_id); > + if (ret < 0) > + return ret; > + > + if (chip_id != FXAS21002C_CHIP_ID_1 && > + chip_id != FXAS21002C_CHIP_ID_2) { > + dev_err(dev, "chip id 0x%02x is not supported\n", chip_id); > + return -EINVAL; > + } > + > + data->chip_id = chip_id; > + > + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY); > + if (ret < 0) > + return ret; > + > + /* Set ODR to 200HZ as default */ > + ret = fxas21002c_odr_set(data, 200); > + if (ret < 0) > + dev_err(dev, "failed to set ODR: %d\n", ret); > + > + return ret; > +} > + > +static int fxas21002c_data_rdy_trigger_set_state(struct iio_trigger *trig, > + bool state) > +{ > + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); > + struct fxas21002c_data *data = iio_priv(indio_dev); > + > + return regmap_field_write(data->regmap_fields[F_INT_EN_DRDY], state); > +} > + > +static const struct iio_trigger_ops fxas21002c_trigger_ops = { > + .set_trigger_state = &fxas21002c_data_rdy_trigger_set_state, > +}; > + > +static irqreturn_t fxas21002c_data_rdy_trig_poll(int irq, void *private) > +{ > + struct iio_dev *indio_dev = private; > + struct fxas21002c_data *data = iio_priv(indio_dev); > + unsigned int data_ready; > + int ret; > + > + ret = regmap_field_read(data->regmap_fields[F_SRC_DRDY], &data_ready); > + if (ret < 0) > + return IRQ_NONE; > + > + if (!data_ready) > + return IRQ_NONE; > + > + iio_trigger_poll(data->dready_trig); > + > + return IRQ_HANDLED; > +} > + > +static int fxas21002c_trigger_probe(struct fxas21002c_data *data) > +{ > + struct device *dev = regmap_get_device(data->regmap); > + struct iio_dev *indio_dev = dev_get_drvdata(dev); > + struct device_node *np = indio_dev->dev.of_node; > + unsigned long irq_trig; > + bool irq_open_drain; > + int irq1; > + int ret; > + > + if (!data->irq) > + return 0; > + > + irq1 = of_irq_get_byname(np, "INT1"); > + > + if (irq1 == data->irq) { > + dev_info(dev, "using interrupt line INT1\n"); > + ret = regmap_field_write(data->regmap_fields[F_INT_CFG_DRDY], > + 1); > + if (ret < 0) > + return ret; > + } > + > + dev_info(dev, "using interrupt line INT2\n"); > + > + irq_open_drain = of_property_read_bool(np, "drive-open-drain"); > + > + data->dready_trig = devm_iio_trigger_alloc(dev, "%s-dev%d", > + indio_dev->name, > + indio_dev->id); > + if (!data->dready_trig) > + return -ENOMEM; > + > + irq_trig = IRQF_TRIGGER_RISING; > + if (irq_open_drain) > + irq_trig |= IRQF_SHARED; > + > + ret = devm_request_irq(dev, data->irq, fxas21002c_data_rdy_trig_poll, > + irq_trig, "fxas21002c_data_ready", > + data->dready_trig); > + if (ret < 0) > + return ret; > + > + data->dready_trig->dev.parent = dev; > + data->dready_trig->ops = &fxas21002c_trigger_ops; > + iio_trigger_set_drvdata(data->dready_trig, indio_dev); > + > + return devm_iio_trigger_register(dev, data->dready_trig); > +} > + > +static int fxas21002c_power_enable(struct fxas21002c_data *data) > +{ > + int ret; > + > + ret = regulator_enable(data->vdd); > + if (ret < 0) > + return ret; > + > + return regulator_enable(data->vddio); If this fails on this second call, then it should turn the first regulator off. A function should leave no side effects if it fails. Makes for a much easier code flow to review. > +} > + > +static void fxas21002c_power_disable(struct fxas21002c_data *data) > +{ > + regulator_disable(data->vdd); > + regulator_disable(data->vddio); > +} > + > +static void fxas21002c_power_disable_action(void *_data) > +{ > + struct fxas21002c_data *data = _data; > + > + fxas21002c_power_disable(data); > +} > + > +static int fxas21002c_regulators_get(struct fxas21002c_data *data) > +{ > + struct device *dev = regmap_get_device(data->regmap); > + > + data->vdd = devm_regulator_get(dev->parent, "vdd"); > + if (IS_ERR(data->vdd)) > + return PTR_ERR(data->vdd); > + > + data->vddio = devm_regulator_get(dev->parent, "vddio"); > + if (IS_ERR(data->vddio)) > + return PTR_ERR(data->vddio); > + > + return 0; > +} > + > +int fxas21002c_core_probe(struct device *dev, struct regmap *regmap, int irq, > + const char *name) > +{ > + struct fxas21002c_data *data; > + struct iio_dev *indio_dev; > + struct regmap_field *f; > + int i; > + int ret; > + > + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + dev_set_drvdata(dev, indio_dev); > + data->irq = irq; > + data->regmap = regmap; > + > + for (i = 0; i < F_MAX_FIELDS; i++) { > + f = devm_regmap_field_alloc(dev, data->regmap, > + fxas21002c_reg_fields[i]); > + if (IS_ERR(f)) > + return PTR_ERR(f); > + > + data->regmap_fields[i] = f; > + } > + > + mutex_init(&data->lock); > + > + ret = fxas21002c_regulators_get(data); > + if (ret < 0) > + return ret; > + > + ret = devm_add_action(dev, fxas21002c_power_disable_action, data); This is a bit odd, normally you would have a call to devm_add_action_or_reset after the thing you are unwinding rather than set up the unwind before the call (power_enable) and hence potentially end up disabling something that was never successfully enabled. The or_reset deals with the devm_add_action itself failing. > + if (ret < 0) > + return ret; > + > + ret = fxas21002c_power_enable(data); > + if (ret < 0) > + return ret; > + > + ret = fxas21002c_chip_init(data); > + if (ret < 0) > + return ret; > + > + indio_dev->dev.parent = dev; > + indio_dev->channels = fxas21002c_channels; > + indio_dev->num_channels = ARRAY_SIZE(fxas21002c_channels); > + indio_dev->name = name; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->info = &fxas21002c_info; > + > + ret = fxas21002c_trigger_probe(data); > + if (ret < 0) > + return ret; > + > + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, > + iio_pollfunc_store_time, > + fxas21002c_trigger_handler, NULL); > + if (ret < 0) > + return ret; > + > + ret = pm_runtime_set_active(dev); > + if (ret) > + return ret; > + > + pm_runtime_enable(dev); > + pm_runtime_set_autosuspend_delay(dev, 2000); > + pm_runtime_use_autosuspend(dev); > + > + ret = devm_iio_device_register(dev, indio_dev); > + if (ret < 0) > + return ret; > + > + dev_info(dev, "fxas21002c iio device ready\n"); I may have mentioned this before, but this is noise. There are lots of trivial ways to find out if this succeeded and in many ways the kernel log is one of the harder ways to find out. Please drop. > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(fxas21002c_core_probe); > + > +void fxas21002c_core_remove(struct device *dev) > +{ > + struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev)); > + > + pm_runtime_disable(dev); > + pm_runtime_set_suspended(dev); > + pm_runtime_put_noidle(dev); > + > + fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY); > + fxas21002c_power_disable(data); > +} > +EXPORT_SYMBOL_GPL(fxas21002c_core_remove); > + > +static int __maybe_unused fxas21002c_suspend(struct device *dev) > +{ > + struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev)); > + > + fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY); > + fxas21002c_power_disable(data); > + > + return 0; > +} > + > +static int __maybe_unused fxas21002c_resume(struct device *dev) > +{ > + struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev)); > + int ret; > + > + ret = fxas21002c_power_enable(data); > + if (ret < 0) > + return ret; > + > + ret = fxas21002c_mode_set(data, data->prev_mode); > + if (ret < 0) > + return ret; As below, _mode_set only returns 0 or negative so obvious simplification here. > + > + return 0; > +} > + > +static int __maybe_unused fxas21002c_runtime_suspend(struct device *dev) > +{ > + struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev)); > + int ret; > + > + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_READY); > + if (ret < 0) I'm not actually convinced this makes sense. If we have an error from mode set, it probably indicates a communications problem. Frankly at that point there is little point in coming back again. So why this return? > + return -EAGAIN; > + > + return 0; > +} > + > +static int __maybe_unused fxas21002c_runtime_resume(struct device *dev) > +{ > + struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev)); > + int ret; > + > + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_ACTIVE); > + if (ret < 0) > + return ret; Could be simplified to a simple return fxsa21002c_mode_set(..) As that only returns negative or 0 (I think...) > + > + return 0; > +} > + > +const struct dev_pm_ops fxas21002c_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(fxas21002c_suspend, fxas21002c_resume) > + SET_RUNTIME_PM_OPS(fxas21002c_runtime_suspend, > + fxas21002c_runtime_resume, NULL) > +}; > +EXPORT_SYMBOL_GPL(fxas21002c_pm_ops); > + > +MODULE_AUTHOR("Rui Miguel Silva <rui.silva@linaro.org>"); > +MODULE_LICENSE("GPL v2"); > +MODULE_DESCRIPTION("FXAS21002C Gyro driver");
Hi Jonathan, On Sat 16 Mar 2019 at 16:29, Jonathan Cameron wrote: > On Wed, 13 Mar 2019 18:39:58 +0000 > Rui Miguel Silva <rui.silva@linaro.org> wrote: > >> Add core support for the NXP fxas21002c Tri-axis gyroscope, >> using the iio subsystem. It supports PM operations, axis >> reading, >> temperature, scale factor of the axis, high pass and low pass >> filtering, and sampling frequency selection. >> >> It will have extras modules to support the communication over >> i2c and >> spi. >> >> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> > A few additional minor comments, but basically good. Great, thanks for the review, I will send v4 later. --- Cheers, Rui > >> --- >> drivers/iio/gyro/Kconfig | 11 + >> drivers/iio/gyro/Makefile | 1 + >> drivers/iio/gyro/fxas21002c.h | 151 +++++ >> drivers/iio/gyro/fxas21002c_core.c | 989 >> +++++++++++++++++++++++++++++ >> 4 files changed, 1152 insertions(+) >> create mode 100644 drivers/iio/gyro/fxas21002c.h >> create mode 100644 drivers/iio/gyro/fxas21002c_core.c >> >> diff --git a/drivers/iio/gyro/Kconfig >> b/drivers/iio/gyro/Kconfig >> index 3126cf05e6b9..cfd2cf44bac8 100644 >> --- a/drivers/iio/gyro/Kconfig >> +++ b/drivers/iio/gyro/Kconfig >> @@ -73,6 +73,17 @@ config BMG160_SPI >> tristate >> select REGMAP_SPI >> >> +config FXAS21002C >> + tristate "NXP FXAS21002C Gyro Sensor" >> + select IIO_BUFFER >> + select IIO_TRIGGERED_BUFFER >> + help >> + Say yes here to build support for NXP FXAS21002C >> Tri-axis Gyro >> + Sensor driver connected via I2C or SPI. >> + >> + This driver can also be built as a module. If so, >> the module >> + will be called fxas21002c_i2c or fxas21002c_spi. >> + >> config HID_SENSOR_GYRO_3D >> depends on HID_SENSOR_HUB >> select IIO_BUFFER >> diff --git a/drivers/iio/gyro/Makefile >> b/drivers/iio/gyro/Makefile >> index 295ec780c4eb..247dc600a602 100644 >> --- a/drivers/iio/gyro/Makefile >> +++ b/drivers/iio/gyro/Makefile >> @@ -12,6 +12,7 @@ obj-$(CONFIG_ADXRS450) += adxrs450.o >> obj-$(CONFIG_BMG160) += bmg160_core.o >> obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o >> obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o >> +obj-$(CONFIG_FXAS21002C) += fxas21002c_core.o >> >> obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o >> >> diff --git a/drivers/iio/gyro/fxas21002c.h >> b/drivers/iio/gyro/fxas21002c.h >> new file mode 100644 >> index 000000000000..e21fd410950c >> --- /dev/null >> +++ b/drivers/iio/gyro/fxas21002c.h >> @@ -0,0 +1,151 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * Driver for NXP FXAS21002C Gyroscope - Header >> + * >> + * Copyright (C) 2019 Linaro Ltd. >> + * >> + */ >> + >> +#ifndef FXAS21002C_H_ >> +#define FXAS21002C_H_ >> + >> +#include <linux/regmap.h> >> + >> +#define FXAS21002C_REG_STATUS 0x00 >> +#define FXAS21002C_REG_OUT_X_MSB 0x01 >> +#define FXAS21002C_REG_OUT_X_LSB 0x02 >> +#define FXAS21002C_REG_OUT_Y_MSB 0x03 >> +#define FXAS21002C_REG_OUT_Y_LSB 0x04 >> +#define FXAS21002C_REG_OUT_Z_MSB 0x05 >> +#define FXAS21002C_REG_OUT_Z_LSB 0x06 >> +#define FXAS21002C_REG_DR_STATUS 0x07 >> +#define FXAS21002C_REG_F_STATUS 0x08 >> +#define FXAS21002C_REG_F_SETUP 0x09 >> +#define FXAS21002C_REG_F_EVENT 0x0A >> +#define FXAS21002C_REG_INT_SRC_FLAG 0x0B >> +#define FXAS21002C_REG_WHO_AM_I 0x0C >> +#define FXAS21002C_REG_CTRL0 0x0D >> +#define FXAS21002C_REG_RT_CFG 0x0E >> +#define FXAS21002C_REG_RT_SRC 0x0F >> +#define FXAS21002C_REG_RT_THS 0x10 >> +#define FXAS21002C_REG_RT_COUNT 0x11 >> +#define FXAS21002C_REG_TEMP 0x12 >> +#define FXAS21002C_REG_CTRL1 0x13 >> +#define FXAS21002C_REG_CTRL2 0x14 >> +#define FXAS21002C_REG_CTRL3 0x15 >> + >> +enum fxas21002c_fields { >> + F_DR_STATUS, >> + F_OUT_X_MSB, >> + F_OUT_X_LSB, >> + F_OUT_Y_MSB, >> + F_OUT_Y_LSB, >> + F_OUT_Z_MSB, >> + F_OUT_Z_LSB, >> + /* DR_STATUS */ >> + F_ZYX_OW, F_Z_OW, F_Y_OW, F_X_OW, F_ZYX_DR, F_Z_DR, >> F_Y_DR, F_X_DR, >> + /* F_STATUS */ >> + F_OVF, F_WMKF, F_CNT, >> + /* F_SETUP */ >> + F_MODE, F_WMRK, >> + /* F_EVENT */ >> + F_EVENT, FE_TIME, >> + /* INT_SOURCE_FLAG */ >> + F_BOOTEND, F_SRC_FIFO, F_SRC_RT, F_SRC_DRDY, >> + /* WHO_AM_I */ >> + F_WHO_AM_I, >> + /* CTRL_REG0 */ >> + F_BW, F_SPIW, F_SEL, F_HPF_EN, F_FS, >> + /* RT_CFG */ >> + F_ELE, F_ZTEFE, F_YTEFE, F_XTEFE, >> + /* RT_SRC */ >> + F_EA, F_ZRT, F_ZRT_POL, F_YRT, F_YRT_POL, F_XRT, >> F_XRT_POL, >> + /* RT_THS */ >> + F_DBCNTM, F_THS, >> + /* RT_COUNT */ >> + F_RT_COUNT, >> + /* TEMP */ >> + F_TEMP, >> + /* CTRL_REG1 */ >> + F_RST, F_ST, F_DR, F_ACTIVE, F_READY, >> + /* CTRL_REG2 */ >> + F_INT_CFG_FIFO, F_INT_EN_FIFO, F_INT_CFG_RT, F_INT_EN_RT, >> + F_INT_CFG_DRDY, F_INT_EN_DRDY, F_IPOL, F_PP_OD, >> + /* CTRL_REG3 */ >> + F_WRAPTOONE, F_EXTCTRLEN, F_FS_DOUBLE, >> + /* MAX FIELDS */ >> + F_MAX_FIELDS, >> +}; >> + >> +static const struct reg_field fxas21002c_reg_fields[] = { >> + [F_DR_STATUS] = REG_FIELD(FXAS21002C_REG_STATUS, >> 0, 7), >> + [F_OUT_X_MSB] = >> REG_FIELD(FXAS21002C_REG_OUT_X_MSB, 0, 7), >> + [F_OUT_X_LSB] = >> REG_FIELD(FXAS21002C_REG_OUT_X_LSB, 0, 7), >> + [F_OUT_Y_MSB] = >> REG_FIELD(FXAS21002C_REG_OUT_Y_MSB, 0, 7), >> + [F_OUT_Y_LSB] = >> REG_FIELD(FXAS21002C_REG_OUT_Y_LSB, 0, 7), >> + [F_OUT_Z_MSB] = >> REG_FIELD(FXAS21002C_REG_OUT_Z_MSB, 0, 7), >> + [F_OUT_Z_LSB] = >> REG_FIELD(FXAS21002C_REG_OUT_Z_LSB, 0, 7), >> + [F_ZYX_OW] = >> REG_FIELD(FXAS21002C_REG_DR_STATUS, 7, 7), >> + [F_Z_OW] = >> REG_FIELD(FXAS21002C_REG_DR_STATUS, 6, 6), >> + [F_Y_OW] = >> REG_FIELD(FXAS21002C_REG_DR_STATUS, 5, 5), >> + [F_X_OW] = >> REG_FIELD(FXAS21002C_REG_DR_STATUS, 4, 4), >> + [F_ZYX_DR] = >> REG_FIELD(FXAS21002C_REG_DR_STATUS, 3, 3), >> + [F_Z_DR] = >> REG_FIELD(FXAS21002C_REG_DR_STATUS, 2, 2), >> + [F_Y_DR] = >> REG_FIELD(FXAS21002C_REG_DR_STATUS, 1, 1), >> + [F_X_DR] = >> REG_FIELD(FXAS21002C_REG_DR_STATUS, 0, 0), >> + [F_OVF] = >> REG_FIELD(FXAS21002C_REG_F_STATUS, 7, 7), >> + [F_WMKF] = >> REG_FIELD(FXAS21002C_REG_F_STATUS, 6, 6), >> + [F_CNT] = >> REG_FIELD(FXAS21002C_REG_F_STATUS, 0, 5), >> + [F_MODE] = >> REG_FIELD(FXAS21002C_REG_F_SETUP, 6, 7), >> + [F_WMRK] = >> REG_FIELD(FXAS21002C_REG_F_SETUP, 0, 5), >> + [F_EVENT] = >> REG_FIELD(FXAS21002C_REG_F_EVENT, 5, 5), >> + [FE_TIME] = >> REG_FIELD(FXAS21002C_REG_F_EVENT, 0, 4), >> + [F_BOOTEND] = >> REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 3, 3), >> + [F_SRC_FIFO] = >> REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 2, 2), >> + [F_SRC_RT] = >> REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 1, 1), >> + [F_SRC_DRDY] = >> REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 0, 0), >> + [F_WHO_AM_I] = >> REG_FIELD(FXAS21002C_REG_WHO_AM_I, 0, 7), >> + [F_BW] = REG_FIELD(FXAS21002C_REG_CTRL0, >> 6, 7), >> + [F_SPIW] = REG_FIELD(FXAS21002C_REG_CTRL0, >> 5, 5), >> + [F_SEL] = REG_FIELD(FXAS21002C_REG_CTRL0, >> 3, 4), >> + [F_HPF_EN] = REG_FIELD(FXAS21002C_REG_CTRL0, >> 2, 2), >> + [F_FS] = REG_FIELD(FXAS21002C_REG_CTRL0, >> 0, 1), >> + [F_ELE] = REG_FIELD(FXAS21002C_REG_RT_CFG, >> 3, 3), >> + [F_ZTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, >> 2, 2), >> + [F_YTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, >> 1, 1), >> + [F_XTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, >> 0, 0), >> + [F_EA] = REG_FIELD(FXAS21002C_REG_RT_SRC, >> 6, 6), >> + [F_ZRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, >> 5, 5), >> + [F_ZRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, >> 4, 4), >> + [F_YRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, >> 3, 3), >> + [F_YRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, >> 2, 2), >> + [F_XRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, >> 1, 1), >> + [F_XRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, >> 0, 0), >> + [F_DBCNTM] = REG_FIELD(FXAS21002C_REG_RT_THS, >> 7, 7), >> + [F_THS] = REG_FIELD(FXAS21002C_REG_RT_SRC, >> 0, 6), >> + [F_RT_COUNT] = >> REG_FIELD(FXAS21002C_REG_RT_COUNT, 0, 7), >> + [F_TEMP] = REG_FIELD(FXAS21002C_REG_TEMP, >> 0, 7), >> + [F_RST] = REG_FIELD(FXAS21002C_REG_CTRL1, >> 6, 6), >> + [F_ST] = REG_FIELD(FXAS21002C_REG_CTRL1, >> 5, 5), >> + [F_DR] = REG_FIELD(FXAS21002C_REG_CTRL1, >> 2, 4), >> + [F_ACTIVE] = REG_FIELD(FXAS21002C_REG_CTRL1, >> 1, 1), >> + [F_READY] = REG_FIELD(FXAS21002C_REG_CTRL1, >> 0, 0), >> + [F_INT_CFG_FIFO] = REG_FIELD(FXAS21002C_REG_CTRL2, >> 7, 7), >> + [F_INT_EN_FIFO] = REG_FIELD(FXAS21002C_REG_CTRL2, >> 6, 6), >> + [F_INT_CFG_RT] = REG_FIELD(FXAS21002C_REG_CTRL2, >> 5, 5), >> + [F_INT_EN_RT] = REG_FIELD(FXAS21002C_REG_CTRL2, >> 4, 4), >> + [F_INT_CFG_DRDY] = REG_FIELD(FXAS21002C_REG_CTRL2, >> 3, 3), >> + [F_INT_EN_DRDY] = REG_FIELD(FXAS21002C_REG_CTRL2, >> 2, 2), >> + [F_IPOL] = REG_FIELD(FXAS21002C_REG_CTRL2, >> 1, 1), >> + [F_PP_OD] = REG_FIELD(FXAS21002C_REG_CTRL2, >> 0, 0), >> + [F_WRAPTOONE] = REG_FIELD(FXAS21002C_REG_CTRL3, >> 3, 3), >> + [F_EXTCTRLEN] = REG_FIELD(FXAS21002C_REG_CTRL3, >> 2, 2), >> + [F_FS_DOUBLE] = REG_FIELD(FXAS21002C_REG_CTRL3, >> 0, 0), >> +}; >> + >> +extern const struct dev_pm_ops fxas21002c_pm_ops; >> + >> +int fxas21002c_core_probe(struct device *dev, struct regmap >> *regmap, int irq, >> + const char *name); >> +void fxas21002c_core_remove(struct device *dev); >> +#endif >> diff --git a/drivers/iio/gyro/fxas21002c_core.c >> b/drivers/iio/gyro/fxas21002c_core.c >> new file mode 100644 >> index 000000000000..dccded203dd5 >> --- /dev/null >> +++ b/drivers/iio/gyro/fxas21002c_core.c >> @@ -0,0 +1,989 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Driver for NXP FXAS21002C Gyroscope - Core >> + * >> + * Copyright (C) 2019 Linaro Ltd. >> + */ >> + >> +#include <linux/interrupt.h> >> +#include <linux/module.h> >> +#include <linux/of_irq.h> >> +#include <linux/pm.h> >> +#include <linux/pm_runtime.h> >> +#include <linux/regmap.h> >> +#include <linux/regulator/consumer.h> >> + >> +#include <linux/iio/events.h> >> +#include <linux/iio/iio.h> >> +#include <linux/iio/buffer.h> >> +#include <linux/iio/sysfs.h> >> +#include <linux/iio/trigger.h> >> +#include <linux/iio/trigger_consumer.h> >> +#include <linux/iio/triggered_buffer.h> >> + >> +#include "fxas21002c.h" >> + >> +#define FXAS21002C_CHIP_ID_1 0xD6 >> +#define FXAS21002C_CHIP_ID_2 0xD7 >> + >> +enum fxas21002c_mode_state { >> + FXAS21002C_MODE_STANDBY, >> + FXAS21002C_MODE_READY, >> + FXAS21002C_MODE_ACTIVE, >> +}; >> + >> +#define FXAS21002C_STANDBY_ACTIVE_TIME_MS 62 >> +#define FXAS21002C_READY_ACTIVE_TIME_MS 7 >> + >> +#define FXAS21002C_ODR_LIST_MAX 10 >> + >> +#define FXAS21002C_SCALE_FRACTIONAL 32 >> +#define FXAS21002C_RANGE_LIMIT_DOUBLE 2000 >> + >> +#define FXAS21002C_AXIS_TO_REG(axis) (FXAS21002C_REG_OUT_X_MSB >> + ((axis) * 2)) >> + >> +static const int fxas21002c_odr_values[] = { >> + 800, 400, 200, 100, 50, 25, 12, 12 >> +}; >> + >> +/* >> + * These values are taken from the low-pass filter cutoff >> frequency calculated >> + * ODR * 0.lpf_values. So, for ODR = 800Hz with a lpf value = >> 0.32 >> + * => LPF cutoff frequency = 800 * 0.32 = 256 Hz >> + */ >> +static const int fxas21002c_lpf_values[] = { >> + 32, 16, 8 >> +}; >> + >> +/* >> + * These values are taken from the high-pass filter cutoff >> frequency calculated >> + * ODR * 0.0hpf_values. So, for ODR = 800Hz with a hpf value = >> 0.018750 >> + * => HPF cutoff frequency = 800 * 0.018750 = 15 Hz >> + */ >> +static const int fxas21002c_hpf_values[] = { >> + 18750, 9625, 4875, 2475 >> +}; >> + >> +static const int fxas21002c_range_values[] = { >> + 4000, 2000, 1000, 500, 250 >> +}; >> + >> +struct fxas21002c_data { >> + u8 chip_id; >> + enum fxas21002c_mode_state mode; >> + enum fxas21002c_mode_state prev_mode; >> + >> + struct mutex lock; /* serialize data access >> */ >> + struct regmap *regmap; >> + struct regmap_field *regmap_fields[F_MAX_FIELDS]; >> + struct iio_trigger *dready_trig; >> + int irq; >> + >> + struct regulator *vdd; >> + struct regulator *vddio; >> + >> + /* >> + * DMA (thus cache coherency maintenance) requires the >> + * transfer buffers to live in their own cache lines. >> + */ >> + s16 buffer[8] ____cacheline_aligned; >> +}; >> + >> +enum fxas21002c_channel_index { >> + CHANNEL_SCAN_INDEX_X, >> + CHANNEL_SCAN_INDEX_Y, >> + CHANNEL_SCAN_INDEX_Z, >> + CHANNEL_SCAN_MAX, >> +}; >> + >> +static int fxas21002c_odr_hz_from_value(struct fxas21002c_data >> *data, u8 value) >> +{ >> + int odr_value_max = ARRAY_SIZE(fxas21002c_odr_values) - 1; >> + >> + value = min_t(u8, value, odr_value_max); >> + >> + return fxas21002c_odr_values[value]; >> +} >> + >> +static int fxas21002c_odr_value_from_hz(struct fxas21002c_data >> *data, >> + unsigned int hz) >> +{ >> + int odr_table_size = ARRAY_SIZE(fxas21002c_odr_values); >> + int i; >> + >> + for (i = 0; i < odr_table_size; i++) >> + if (fxas21002c_odr_values[i] == hz) >> + return i; >> + >> + return -EINVAL; >> +} >> + >> +static int fxas21002c_lpf_bw_from_value(struct fxas21002c_data >> *data, u8 value) >> +{ >> + int lpf_value_max = ARRAY_SIZE(fxas21002c_lpf_values) - 1; >> + >> + value = min_t(u8, value, lpf_value_max); >> + >> + return fxas21002c_lpf_values[value]; >> +} >> + >> +static int fxas21002c_lpf_value_from_bw(struct fxas21002c_data >> *data, >> + unsigned int hz) >> +{ >> + int lpf_table_size = ARRAY_SIZE(fxas21002c_lpf_values); >> + int i; >> + >> + for (i = 0; i < lpf_table_size; i++) >> + if (fxas21002c_lpf_values[i] == hz) >> + return i; >> + >> + return -EINVAL; >> +} >> + >> +static int fxas21002c_hpf_sel_from_value(struct >> fxas21002c_data *data, u8 value) >> +{ >> + int hpf_value_max = ARRAY_SIZE(fxas21002c_hpf_values) - 1; >> + >> + value = min_t(u8, value, hpf_value_max); >> + >> + return fxas21002c_hpf_values[value]; >> +} >> + >> +static int fxas21002c_hpf_value_from_sel(struct >> fxas21002c_data *data, >> + unsigned int hz) >> +{ >> + int hpf_table_size = ARRAY_SIZE(fxas21002c_hpf_values); >> + int i; >> + >> + for (i = 0; i < hpf_table_size; i++) >> + if (fxas21002c_hpf_values[i] == hz) >> + return i; >> + >> + return -EINVAL; >> +} >> + >> +static int fxas21002c_range_fs_from_value(struct >> fxas21002c_data *data, >> + u8 value) >> +{ >> + int range_value_max = ARRAY_SIZE(fxas21002c_range_values) >> - 1; >> + unsigned int fs_double; >> + int ret; >> + >> + /* We need to check if FS_DOUBLE is enabled to offset the >> value */ >> + ret = regmap_field_read(data->regmap_fields[F_FS_DOUBLE], >> &fs_double); >> + if (ret < 0) >> + return ret; >> + >> + if (!fs_double) >> + value += 1; >> + >> + value = min_t(u8, value, range_value_max); >> + >> + return fxas21002c_range_values[value]; >> +} >> + >> +static int fxas21002c_range_value_from_fs(struct >> fxas21002c_data *data, >> + unsigned int range) >> +{ >> + int range_table_size = >> ARRAY_SIZE(fxas21002c_range_values); >> + bool found = false; >> + int fs_double = 0; >> + int ret; >> + int i; >> + >> + for (i = 0; i < range_table_size; i++) >> + if (fxas21002c_range_values[i] == range) { >> + found = true; >> + break; >> + } >> + >> + if (!found) >> + return -EINVAL; >> + >> + if (range > FXAS21002C_RANGE_LIMIT_DOUBLE) >> + fs_double = 1; >> + >> + ret = regmap_field_write(data->regmap_fields[F_FS_DOUBLE], >> fs_double); >> + if (ret < 0) >> + return ret; >> + >> + return i; >> +} >> + >> +static int fxas21002c_mode_get(struct fxas21002c_data *data) >> +{ >> + unsigned int active; >> + unsigned int ready; >> + int ret; >> + >> + ret = regmap_field_read(data->regmap_fields[F_ACTIVE], >> &active); >> + if (ret < 0) >> + return ret; >> + if (active) >> + return FXAS21002C_MODE_ACTIVE; >> + >> + ret = regmap_field_read(data->regmap_fields[F_READY], >> &ready); >> + if (ret < 0) >> + return ret; >> + if (ready) >> + return FXAS21002C_MODE_READY; >> + >> + return FXAS21002C_MODE_STANDBY; >> +} >> + >> +static int fxas21002c_mode_set(struct fxas21002c_data *data, >> + enum fxas21002c_mode_state mode) >> +{ >> + int ret; >> + >> + if (mode == data->mode) >> + return 0; >> + >> + if (mode == FXAS21002C_MODE_READY) >> + ret = >> regmap_field_write(data->regmap_fields[F_READY], 1); >> + else >> + ret = >> regmap_field_write(data->regmap_fields[F_READY], 0); >> + if (ret < 0) >> + return ret; >> + >> + if (mode == FXAS21002C_MODE_ACTIVE) >> + ret = >> regmap_field_write(data->regmap_fields[F_ACTIVE], 1); >> + else >> + ret = >> regmap_field_write(data->regmap_fields[F_ACTIVE], 0); >> + if (ret < 0) >> + return ret; >> + >> + /* if going to active wait the setup times */ >> + if (mode == FXAS21002C_MODE_ACTIVE && >> + data->mode == FXAS21002C_MODE_STANDBY) >> + >> msleep_interruptible(FXAS21002C_STANDBY_ACTIVE_TIME_MS); >> + >> + if (data->mode == FXAS21002C_MODE_READY) >> + >> msleep_interruptible(FXAS21002C_READY_ACTIVE_TIME_MS); >> + >> + data->prev_mode = data->mode; >> + data->mode = mode; >> + >> + return ret; >> +} >> + >> +static int fxas21002c_write(struct fxas21002c_data *data, >> + enum fxas21002c_fields field, int >> bits) >> +{ >> + int actual_mode; >> + int ret; >> + >> + mutex_lock(&data->lock); >> + >> + actual_mode = fxas21002c_mode_get(data); >> + if (actual_mode < 0) { >> + ret = actual_mode; >> + goto out_unlock; >> + } >> + >> + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_READY); >> + if (ret < 0) >> + goto out_unlock; >> + >> + ret = regmap_field_write(data->regmap_fields[field], >> bits); >> + if (ret < 0) >> + goto out_unlock; >> + >> + ret = fxas21002c_mode_set(data, data->prev_mode); >> + >> +out_unlock: >> + mutex_unlock(&data->lock); >> + >> + return ret; >> +} >> + >> +static int fxas21002c_pm_get(struct fxas21002c_data *data) >> +{ >> + struct device *dev = regmap_get_device(data->regmap); >> + int ret; >> + >> + ret = pm_runtime_get_sync(dev); >> + if (ret < 0) >> + pm_runtime_put_noidle(dev); >> + >> + return ret; >> +} >> + >> +static int fxas21002c_pm_put(struct fxas21002c_data *data) >> +{ >> + struct device *dev = regmap_get_device(data->regmap); >> + >> + pm_runtime_mark_last_busy(dev); >> + >> + return pm_runtime_put_autosuspend(dev); >> +} >> + >> +static int fxas21002c_temp_get(struct fxas21002c_data *data, >> int *val) >> +{ >> + struct device *dev = regmap_get_device(data->regmap); >> + unsigned int temp; >> + int ret; >> + >> + mutex_lock(&data->lock); >> + ret = fxas21002c_pm_get(data); >> + if (ret < 0) >> + goto data_unlock; >> + >> + ret = regmap_field_read(data->regmap_fields[F_TEMP], >> &temp); >> + if (ret < 0) { >> + dev_err(dev, "failed to read temp: %d\n", ret); >> + goto data_unlock; >> + } >> + >> + *val = sign_extend32(temp, 7); >> + >> + ret = fxas21002c_pm_put(data); >> + if (ret < 0) >> + goto data_unlock; >> + >> + ret = IIO_VAL_INT; >> + >> +data_unlock: >> + mutex_unlock(&data->lock); >> + >> + return ret; >> +} >> + >> +static int fxas21002c_axis_get(struct fxas21002c_data *data, >> + int index, int *val) >> +{ >> + struct device *dev = regmap_get_device(data->regmap); >> + __be16 axis_be; >> + int ret; >> + >> + mutex_lock(&data->lock); >> + ret = fxas21002c_pm_get(data); >> + if (ret < 0) >> + goto data_unlock; >> + >> + ret = regmap_bulk_read(data->regmap, >> FXAS21002C_AXIS_TO_REG(index), >> + &axis_be, sizeof(axis_be)); >> + if (ret < 0) { >> + dev_err(dev, "failed to read axis: %d: %d\n", >> index, ret); >> + goto data_unlock; >> + } >> + >> + *val = sign_extend32(be16_to_cpu(axis_be), 15); >> + >> + ret = fxas21002c_pm_put(data); >> + if (ret < 0) >> + goto data_unlock; >> + >> + ret = IIO_VAL_INT; >> + >> +data_unlock: >> + mutex_unlock(&data->lock); >> + >> + return ret; >> +} >> + >> +static int fxas21002c_odr_get(struct fxas21002c_data *data, >> int *odr) >> +{ >> + unsigned int odr_bits; >> + int ret; >> + >> + mutex_lock(&data->lock); >> + ret = regmap_field_read(data->regmap_fields[F_DR], >> &odr_bits); >> + if (ret < 0) >> + goto data_unlock; >> + >> + *odr = fxas21002c_odr_hz_from_value(data, odr_bits); >> + >> + ret = IIO_VAL_INT; >> + >> +data_unlock: >> + mutex_unlock(&data->lock); >> + >> + return ret; >> +} >> + >> +static int fxas21002c_odr_set(struct fxas21002c_data *data, >> int odr) >> +{ >> + int odr_bits; >> + >> + odr_bits = fxas21002c_odr_value_from_hz(data, odr); >> + if (odr_bits < 0) >> + return odr_bits; >> + >> + return fxas21002c_write(data, F_DR, odr_bits); >> +} >> + >> +static int fxas21002c_lpf_get(struct fxas21002c_data *data, >> int *val2) >> +{ >> + unsigned int bw_bits; >> + int ret; >> + >> + mutex_lock(&data->lock); >> + ret = regmap_field_read(data->regmap_fields[F_BW], >> &bw_bits); >> + if (ret < 0) >> + goto data_unlock; >> + >> + *val2 = fxas21002c_lpf_bw_from_value(data, bw_bits) * >> 10000; >> + >> + ret = IIO_VAL_INT_PLUS_MICRO; >> + >> +data_unlock: >> + mutex_unlock(&data->lock); >> + >> + return ret; >> +} >> + >> +static int fxas21002c_lpf_set(struct fxas21002c_data *data, >> int bw) >> +{ >> + int bw_bits; >> + int odr; >> + int ret; >> + >> + bw_bits = fxas21002c_lpf_value_from_bw(data, bw); >> + if (bw_bits < 0) >> + return bw_bits; >> + >> + /* >> + * From table 33 of the device spec, for ODR = 25Hz and >> 12.5 value 0.08 >> + * is not allowed and for ODR = 12.5 value 0.16 is also >> not allowed >> + */ >> + ret = fxas21002c_odr_get(data, &odr); >> + if (ret < 0) >> + return -EINVAL; >> + >> + if ((odr == 25 && bw_bits > 0x01) || (odr == 12 && bw_bits >> > 0)) >> + return -EINVAL; >> + >> + return fxas21002c_write(data, F_BW, bw_bits); >> +} >> + >> +static int fxas21002c_hpf_get(struct fxas21002c_data *data, >> int *val2) >> +{ >> + unsigned int sel_bits; >> + int ret; >> + >> + mutex_lock(&data->lock); >> + ret = regmap_field_read(data->regmap_fields[F_SEL], >> &sel_bits); >> + if (ret < 0) >> + goto data_unlock; >> + >> + *val2 = fxas21002c_hpf_sel_from_value(data, sel_bits); >> + >> + ret = IIO_VAL_INT_PLUS_MICRO; >> + >> +data_unlock: >> + mutex_unlock(&data->lock); >> + >> + return ret; >> +} >> + >> +static int fxas21002c_hpf_set(struct fxas21002c_data *data, >> int sel) >> +{ >> + int sel_bits; >> + >> + sel_bits = fxas21002c_hpf_value_from_sel(data, sel); >> + if (sel_bits < 0) >> + return sel_bits; >> + >> + return fxas21002c_write(data, F_SEL, sel_bits); >> +} >> + >> +static int fxas21002c_scale_get(struct fxas21002c_data *data, >> int *val) >> +{ >> + int fs_bits; >> + int scale; >> + int ret = 0; >> + >> + mutex_lock(&data->lock); >> + ret = regmap_field_read(data->regmap_fields[F_FS], >> &fs_bits); >> + if (ret < 0) >> + goto data_unlock; >> + >> + scale = fxas21002c_range_fs_from_value(data, fs_bits); >> + if (scale < 0) { >> + ret = scale; >> + goto data_unlock; >> + } >> + >> + *val = scale; >> + >> +data_unlock: >> + mutex_unlock(&data->lock); >> + >> + return ret; >> +} >> + >> +static int fxas21002c_scale_set(struct fxas21002c_data *data, >> int range) >> +{ >> + int fs_bits; >> + >> + fs_bits = fxas21002c_range_value_from_fs(data, range); >> + if (fs_bits < 0) >> + return fs_bits; >> + >> + return fxas21002c_write(data, F_FS, fs_bits); >> +} >> + >> +static int fxas21002c_read_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> int *val, >> + int *val2, long mask) >> +{ >> + struct fxas21002c_data *data = iio_priv(indio_dev); >> + int ret; >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_RAW: >> + switch (chan->type) { >> + case IIO_TEMP: >> + return fxas21002c_temp_get(data, val); >> + case IIO_ANGL_VEL: >> + return fxas21002c_axis_get(data, >> chan->scan_index, val); >> + default: >> + return -EINVAL; >> + } >> + case IIO_CHAN_INFO_SCALE: >> + switch (chan->type) { >> + case IIO_ANGL_VEL: >> + *val2 = FXAS21002C_SCALE_FRACTIONAL; >> + ret = fxas21002c_scale_get(data, val); >> + if (ret < 0) >> + return ret; >> + >> + return IIO_VAL_FRACTIONAL; >> + default: >> + return -EINVAL; >> + } >> + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: >> + *val = 0; >> + return fxas21002c_lpf_get(data, val2); >> + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: >> + *val = 0; >> + return fxas21002c_hpf_get(data, val2); >> + case IIO_CHAN_INFO_SAMP_FREQ: >> + *val2 = 0; >> + return fxas21002c_odr_get(data, val); >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static int fxas21002c_write_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> int val, >> + int val2, long mask) >> +{ >> + struct fxas21002c_data *data = iio_priv(indio_dev); >> + int range; >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_SAMP_FREQ: >> + if (val2) >> + return -EINVAL; >> + >> + return fxas21002c_odr_set(data, val); >> + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: >> + if (val) >> + return -EINVAL; >> + >> + val2 = val2 / 10000; >> + return fxas21002c_lpf_set(data, val2); >> + case IIO_CHAN_INFO_SCALE: >> + switch (chan->type) { >> + case IIO_ANGL_VEL: >> + range = (((val * 1000 + val2 / 1000) * >> + FXAS21002C_SCALE_FRACTIONAL) / >> 1000); >> + return fxas21002c_scale_set(data, range); >> + default: >> + return -EINVAL; >> + } >> + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: >> + return fxas21002c_hpf_set(data, val2); >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("12.5 25 50 100 200 400 >> 800"); >> + >> +static >> IIO_CONST_ATTR(in_anglvel_filter_low_pass_3db_frequency_available, >> + "0.32 0.16 0.08"); >> + >> +static >> IIO_CONST_ATTR(in_anglvel_filter_high_pass_3db_frequency_available, >> + "0.018750 0.009625 0.004875 0.002475"); >> + >> +static IIO_CONST_ATTR(in_anglvel_scale_available, >> + "125.0 62.5 31.25 15.625 7.8125"); >> + >> +static struct attribute *fxas21002c_attributes[] = { >> + >> &iio_const_attr_sampling_frequency_available.dev_attr.attr, >> + >> &iio_const_attr_in_anglvel_filter_low_pass_3db_frequency_available.dev_attr.attr, >> + >> &iio_const_attr_in_anglvel_filter_high_pass_3db_frequency_available.dev_attr.attr, >> + &iio_const_attr_in_anglvel_scale_available.dev_attr.attr, >> + NULL, >> +}; >> + >> +static const struct attribute_group fxas21002c_attrs_group = { >> + .attrs = fxas21002c_attributes, >> +}; >> + >> +#define FXAS21002C_CHANNEL(_axis) { >> \ >> + .type = IIO_ANGL_VEL, >> \ >> + .modified = 1, >> \ >> + .channel2 = IIO_MOD_##_axis, >> \ >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), >> \ >> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | >> \ >> + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | >> \ >> + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY) >> | \ >> + BIT(IIO_CHAN_INFO_SAMP_FREQ), >> \ >> + .scan_index = CHANNEL_SCAN_INDEX_##_axis, >> \ >> + .scan_type = { >> \ >> + .sign = 's', >> \ >> + .realbits = 16, >> \ >> + .storagebits = 16, >> \ >> + .endianness = IIO_BE, >> \ >> + }, >> \ >> +} >> + >> +static const struct iio_chan_spec fxas21002c_channels[] = { >> + { >> + .type = IIO_TEMP, >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), >> + .scan_index = -1, >> + }, >> + FXAS21002C_CHANNEL(X), >> + FXAS21002C_CHANNEL(Y), >> + FXAS21002C_CHANNEL(Z), >> +}; >> + >> +static const struct iio_info fxas21002c_info = { >> + .attrs = &fxas21002c_attrs_group, >> + .read_raw = &fxas21002c_read_raw, >> + .write_raw = &fxas21002c_write_raw, >> +}; >> + >> +static irqreturn_t fxas21002c_trigger_handler(int irq, void >> *p) >> +{ >> + struct iio_poll_func *pf = p; >> + struct iio_dev *indio_dev = pf->indio_dev; >> + struct fxas21002c_data *data = iio_priv(indio_dev); >> + int ret; >> + >> + mutex_lock(&data->lock); >> + ret = regmap_bulk_read(data->regmap, >> FXAS21002C_REG_OUT_X_MSB, >> + data->buffer, CHANNEL_SCAN_MAX * >> sizeof(s16)); >> + mutex_unlock(&data->lock); >> + if (ret < 0) >> + goto notify_done; >> + >> + iio_push_to_buffers_with_timestamp(indio_dev, >> data->buffer, >> + pf->timestamp); >> + >> +notify_done: >> + iio_trigger_notify_done(indio_dev->trig); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static int fxas21002c_chip_init(struct fxas21002c_data *data) >> +{ >> + struct device *dev = regmap_get_device(data->regmap); >> + unsigned int chip_id; >> + int ret; >> + >> + ret = regmap_field_read(data->regmap_fields[F_WHO_AM_I], >> &chip_id); >> + if (ret < 0) >> + return ret; >> + >> + if (chip_id != FXAS21002C_CHIP_ID_1 && >> + chip_id != FXAS21002C_CHIP_ID_2) { >> + dev_err(dev, "chip id 0x%02x is not supported\n", >> chip_id); >> + return -EINVAL; >> + } >> + >> + data->chip_id = chip_id; >> + >> + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY); >> + if (ret < 0) >> + return ret; >> + >> + /* Set ODR to 200HZ as default */ >> + ret = fxas21002c_odr_set(data, 200); >> + if (ret < 0) >> + dev_err(dev, "failed to set ODR: %d\n", ret); >> + >> + return ret; >> +} >> + >> +static int fxas21002c_data_rdy_trigger_set_state(struct >> iio_trigger *trig, >> + bool state) >> +{ >> + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); >> + struct fxas21002c_data *data = iio_priv(indio_dev); >> + >> + return >> regmap_field_write(data->regmap_fields[F_INT_EN_DRDY], state); >> +} >> + >> +static const struct iio_trigger_ops fxas21002c_trigger_ops = { >> + .set_trigger_state = >> &fxas21002c_data_rdy_trigger_set_state, >> +}; >> + >> +static irqreturn_t fxas21002c_data_rdy_trig_poll(int irq, void >> *private) >> +{ >> + struct iio_dev *indio_dev = private; >> + struct fxas21002c_data *data = iio_priv(indio_dev); >> + unsigned int data_ready; >> + int ret; >> + >> + ret = regmap_field_read(data->regmap_fields[F_SRC_DRDY], >> &data_ready); >> + if (ret < 0) >> + return IRQ_NONE; >> + >> + if (!data_ready) >> + return IRQ_NONE; >> + >> + iio_trigger_poll(data->dready_trig); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static int fxas21002c_trigger_probe(struct fxas21002c_data >> *data) >> +{ >> + struct device *dev = regmap_get_device(data->regmap); >> + struct iio_dev *indio_dev = dev_get_drvdata(dev); >> + struct device_node *np = indio_dev->dev.of_node; >> + unsigned long irq_trig; >> + bool irq_open_drain; >> + int irq1; >> + int ret; >> + >> + if (!data->irq) >> + return 0; >> + >> + irq1 = of_irq_get_byname(np, "INT1"); >> + >> + if (irq1 == data->irq) { >> + dev_info(dev, "using interrupt line INT1\n"); >> + ret = >> regmap_field_write(data->regmap_fields[F_INT_CFG_DRDY], >> + 1); >> + if (ret < 0) >> + return ret; >> + } >> + >> + dev_info(dev, "using interrupt line INT2\n"); >> + >> + irq_open_drain = of_property_read_bool(np, >> "drive-open-drain"); >> + >> + data->dready_trig = devm_iio_trigger_alloc(dev, >> "%s-dev%d", >> + >> indio_dev->name, >> + indio_dev->id); >> + if (!data->dready_trig) >> + return -ENOMEM; >> + >> + irq_trig = IRQF_TRIGGER_RISING; >> + if (irq_open_drain) >> + irq_trig |= IRQF_SHARED; >> + >> + ret = devm_request_irq(dev, data->irq, >> fxas21002c_data_rdy_trig_poll, >> + irq_trig, "fxas21002c_data_ready", >> + data->dready_trig); >> + if (ret < 0) >> + return ret; >> + >> + data->dready_trig->dev.parent = dev; >> + data->dready_trig->ops = &fxas21002c_trigger_ops; >> + iio_trigger_set_drvdata(data->dready_trig, indio_dev); >> + >> + return devm_iio_trigger_register(dev, data->dready_trig); >> +} >> + >> +static int fxas21002c_power_enable(struct fxas21002c_data >> *data) >> +{ >> + int ret; >> + >> + ret = regulator_enable(data->vdd); >> + if (ret < 0) >> + return ret; >> + >> + return regulator_enable(data->vddio); > If this fails on this second call, then it should turn the first > regulator off. A function should leave no side effects if it > fails. Makes for a much easier code flow to review. > >> +} >> + >> +static void fxas21002c_power_disable(struct fxas21002c_data >> *data) >> +{ >> + regulator_disable(data->vdd); >> + regulator_disable(data->vddio); >> +} >> + >> +static void fxas21002c_power_disable_action(void *_data) >> +{ >> + struct fxas21002c_data *data = _data; >> + >> + fxas21002c_power_disable(data); >> +} >> + >> +static int fxas21002c_regulators_get(struct fxas21002c_data >> *data) >> +{ >> + struct device *dev = regmap_get_device(data->regmap); >> + >> + data->vdd = devm_regulator_get(dev->parent, "vdd"); >> + if (IS_ERR(data->vdd)) >> + return PTR_ERR(data->vdd); >> + >> + data->vddio = devm_regulator_get(dev->parent, "vddio"); >> + if (IS_ERR(data->vddio)) >> + return PTR_ERR(data->vddio); >> + >> + return 0; >> +} >> + >> +int fxas21002c_core_probe(struct device *dev, struct regmap >> *regmap, int irq, >> + const char *name) >> +{ >> + struct fxas21002c_data *data; >> + struct iio_dev *indio_dev; >> + struct regmap_field *f; >> + int i; >> + int ret; >> + >> + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); >> + if (!indio_dev) >> + return -ENOMEM; >> + >> + data = iio_priv(indio_dev); >> + dev_set_drvdata(dev, indio_dev); >> + data->irq = irq; >> + data->regmap = regmap; >> + >> + for (i = 0; i < F_MAX_FIELDS; i++) { >> + f = devm_regmap_field_alloc(dev, data->regmap, >> + >> fxas21002c_reg_fields[i]); >> + if (IS_ERR(f)) >> + return PTR_ERR(f); >> + >> + data->regmap_fields[i] = f; >> + } >> + >> + mutex_init(&data->lock); >> + >> + ret = fxas21002c_regulators_get(data); >> + if (ret < 0) >> + return ret; >> + >> + ret = devm_add_action(dev, >> fxas21002c_power_disable_action, data); > This is a bit odd, normally you would have a call > to devm_add_action_or_reset after the thing you are unwinding > rather > than set up the unwind before the call (power_enable) and hence > potentially > end up disabling something that was never successfully enabled. > > The or_reset deals with the devm_add_action itself failing. > >> + if (ret < 0) >> + return ret; >> + >> + ret = fxas21002c_power_enable(data); >> + if (ret < 0) >> + return ret; >> + >> + ret = fxas21002c_chip_init(data); >> + if (ret < 0) >> + return ret; >> + >> + indio_dev->dev.parent = dev; >> + indio_dev->channels = fxas21002c_channels; >> + indio_dev->num_channels = ARRAY_SIZE(fxas21002c_channels); >> + indio_dev->name = name; >> + indio_dev->modes = INDIO_DIRECT_MODE; >> + indio_dev->info = &fxas21002c_info; >> + >> + ret = fxas21002c_trigger_probe(data); >> + if (ret < 0) >> + return ret; >> + >> + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, >> + >> iio_pollfunc_store_time, >> + >> fxas21002c_trigger_handler, NULL); >> + if (ret < 0) >> + return ret; >> + >> + ret = pm_runtime_set_active(dev); >> + if (ret) >> + return ret; >> + >> + pm_runtime_enable(dev); >> + pm_runtime_set_autosuspend_delay(dev, 2000); >> + pm_runtime_use_autosuspend(dev); >> + >> + ret = devm_iio_device_register(dev, indio_dev); >> + if (ret < 0) >> + return ret; >> + >> + dev_info(dev, "fxas21002c iio device ready\n"); > > I may have mentioned this before, but this is noise. There > are lots of trivial ways to find out if this succeeded and > in many ways the kernel log is one of the harder ways to > find out. Please drop. > >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(fxas21002c_core_probe); >> + >> +void fxas21002c_core_remove(struct device *dev) >> +{ >> + struct fxas21002c_data *data = >> iio_priv(dev_get_drvdata(dev)); >> + >> + pm_runtime_disable(dev); >> + pm_runtime_set_suspended(dev); >> + pm_runtime_put_noidle(dev); >> + >> + fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY); >> + fxas21002c_power_disable(data); >> +} >> +EXPORT_SYMBOL_GPL(fxas21002c_core_remove); >> + >> +static int __maybe_unused fxas21002c_suspend(struct device >> *dev) >> +{ >> + struct fxas21002c_data *data = >> iio_priv(dev_get_drvdata(dev)); >> + >> + fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY); >> + fxas21002c_power_disable(data); >> + >> + return 0; >> +} >> + >> +static int __maybe_unused fxas21002c_resume(struct device >> *dev) >> +{ >> + struct fxas21002c_data *data = >> iio_priv(dev_get_drvdata(dev)); >> + int ret; >> + >> + ret = fxas21002c_power_enable(data); >> + if (ret < 0) >> + return ret; >> + >> + ret = fxas21002c_mode_set(data, data->prev_mode); >> + if (ret < 0) >> + return ret; > As below, _mode_set only returns 0 or negative so obvious > simplification here. >> + >> + return 0; >> +} >> + >> +static int __maybe_unused fxas21002c_runtime_suspend(struct >> device *dev) >> +{ >> + struct fxas21002c_data *data = >> iio_priv(dev_get_drvdata(dev)); >> + int ret; >> + >> + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_READY); >> + if (ret < 0) > I'm not actually convinced this makes sense. If we have an error > from > mode set, it probably indicates a communications problem. > Frankly > at that point there is little point in coming back again. > So why this return? > >> + return -EAGAIN; >> + >> + return 0; >> +} >> + >> +static int __maybe_unused fxas21002c_runtime_resume(struct >> device *dev) >> +{ >> + struct fxas21002c_data *data = >> iio_priv(dev_get_drvdata(dev)); >> + int ret; >> + >> + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_ACTIVE); >> + if (ret < 0) >> + return ret; > Could be simplified to a simple > > return fxsa21002c_mode_set(..) > > As that only returns negative or 0 (I think...) > >> + >> + return 0; >> +} >> + >> +const struct dev_pm_ops fxas21002c_pm_ops = { >> + SET_SYSTEM_SLEEP_PM_OPS(fxas21002c_suspend, >> fxas21002c_resume) >> + SET_RUNTIME_PM_OPS(fxas21002c_runtime_suspend, >> + fxas21002c_runtime_resume, NULL) >> +}; >> +EXPORT_SYMBOL_GPL(fxas21002c_pm_ops); >> + >> +MODULE_AUTHOR("Rui Miguel Silva <rui.silva@linaro.org>"); >> +MODULE_LICENSE("GPL v2"); >> +MODULE_DESCRIPTION("FXAS21002C Gyro driver");
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 3126cf05e6b9..cfd2cf44bac8 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -73,6 +73,17 @@ config BMG160_SPI tristate select REGMAP_SPI +config FXAS21002C + tristate "NXP FXAS21002C Gyro Sensor" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for NXP FXAS21002C Tri-axis Gyro + Sensor driver connected via I2C or SPI. + + This driver can also be built as a module. If so, the module + will be called fxas21002c_i2c or fxas21002c_spi. + config HID_SENSOR_GYRO_3D depends on HID_SENSOR_HUB select IIO_BUFFER diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile index 295ec780c4eb..247dc600a602 100644 --- a/drivers/iio/gyro/Makefile +++ b/drivers/iio/gyro/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_ADXRS450) += adxrs450.o obj-$(CONFIG_BMG160) += bmg160_core.o obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o +obj-$(CONFIG_FXAS21002C) += fxas21002c_core.o obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o diff --git a/drivers/iio/gyro/fxas21002c.h b/drivers/iio/gyro/fxas21002c.h new file mode 100644 index 000000000000..e21fd410950c --- /dev/null +++ b/drivers/iio/gyro/fxas21002c.h @@ -0,0 +1,151 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Driver for NXP FXAS21002C Gyroscope - Header + * + * Copyright (C) 2019 Linaro Ltd. + * + */ + +#ifndef FXAS21002C_H_ +#define FXAS21002C_H_ + +#include <linux/regmap.h> + +#define FXAS21002C_REG_STATUS 0x00 +#define FXAS21002C_REG_OUT_X_MSB 0x01 +#define FXAS21002C_REG_OUT_X_LSB 0x02 +#define FXAS21002C_REG_OUT_Y_MSB 0x03 +#define FXAS21002C_REG_OUT_Y_LSB 0x04 +#define FXAS21002C_REG_OUT_Z_MSB 0x05 +#define FXAS21002C_REG_OUT_Z_LSB 0x06 +#define FXAS21002C_REG_DR_STATUS 0x07 +#define FXAS21002C_REG_F_STATUS 0x08 +#define FXAS21002C_REG_F_SETUP 0x09 +#define FXAS21002C_REG_F_EVENT 0x0A +#define FXAS21002C_REG_INT_SRC_FLAG 0x0B +#define FXAS21002C_REG_WHO_AM_I 0x0C +#define FXAS21002C_REG_CTRL0 0x0D +#define FXAS21002C_REG_RT_CFG 0x0E +#define FXAS21002C_REG_RT_SRC 0x0F +#define FXAS21002C_REG_RT_THS 0x10 +#define FXAS21002C_REG_RT_COUNT 0x11 +#define FXAS21002C_REG_TEMP 0x12 +#define FXAS21002C_REG_CTRL1 0x13 +#define FXAS21002C_REG_CTRL2 0x14 +#define FXAS21002C_REG_CTRL3 0x15 + +enum fxas21002c_fields { + F_DR_STATUS, + F_OUT_X_MSB, + F_OUT_X_LSB, + F_OUT_Y_MSB, + F_OUT_Y_LSB, + F_OUT_Z_MSB, + F_OUT_Z_LSB, + /* DR_STATUS */ + F_ZYX_OW, F_Z_OW, F_Y_OW, F_X_OW, F_ZYX_DR, F_Z_DR, F_Y_DR, F_X_DR, + /* F_STATUS */ + F_OVF, F_WMKF, F_CNT, + /* F_SETUP */ + F_MODE, F_WMRK, + /* F_EVENT */ + F_EVENT, FE_TIME, + /* INT_SOURCE_FLAG */ + F_BOOTEND, F_SRC_FIFO, F_SRC_RT, F_SRC_DRDY, + /* WHO_AM_I */ + F_WHO_AM_I, + /* CTRL_REG0 */ + F_BW, F_SPIW, F_SEL, F_HPF_EN, F_FS, + /* RT_CFG */ + F_ELE, F_ZTEFE, F_YTEFE, F_XTEFE, + /* RT_SRC */ + F_EA, F_ZRT, F_ZRT_POL, F_YRT, F_YRT_POL, F_XRT, F_XRT_POL, + /* RT_THS */ + F_DBCNTM, F_THS, + /* RT_COUNT */ + F_RT_COUNT, + /* TEMP */ + F_TEMP, + /* CTRL_REG1 */ + F_RST, F_ST, F_DR, F_ACTIVE, F_READY, + /* CTRL_REG2 */ + F_INT_CFG_FIFO, F_INT_EN_FIFO, F_INT_CFG_RT, F_INT_EN_RT, + F_INT_CFG_DRDY, F_INT_EN_DRDY, F_IPOL, F_PP_OD, + /* CTRL_REG3 */ + F_WRAPTOONE, F_EXTCTRLEN, F_FS_DOUBLE, + /* MAX FIELDS */ + F_MAX_FIELDS, +}; + +static const struct reg_field fxas21002c_reg_fields[] = { + [F_DR_STATUS] = REG_FIELD(FXAS21002C_REG_STATUS, 0, 7), + [F_OUT_X_MSB] = REG_FIELD(FXAS21002C_REG_OUT_X_MSB, 0, 7), + [F_OUT_X_LSB] = REG_FIELD(FXAS21002C_REG_OUT_X_LSB, 0, 7), + [F_OUT_Y_MSB] = REG_FIELD(FXAS21002C_REG_OUT_Y_MSB, 0, 7), + [F_OUT_Y_LSB] = REG_FIELD(FXAS21002C_REG_OUT_Y_LSB, 0, 7), + [F_OUT_Z_MSB] = REG_FIELD(FXAS21002C_REG_OUT_Z_MSB, 0, 7), + [F_OUT_Z_LSB] = REG_FIELD(FXAS21002C_REG_OUT_Z_LSB, 0, 7), + [F_ZYX_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 7, 7), + [F_Z_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 6, 6), + [F_Y_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 5, 5), + [F_X_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 4, 4), + [F_ZYX_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 3, 3), + [F_Z_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 2, 2), + [F_Y_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 1, 1), + [F_X_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 0, 0), + [F_OVF] = REG_FIELD(FXAS21002C_REG_F_STATUS, 7, 7), + [F_WMKF] = REG_FIELD(FXAS21002C_REG_F_STATUS, 6, 6), + [F_CNT] = REG_FIELD(FXAS21002C_REG_F_STATUS, 0, 5), + [F_MODE] = REG_FIELD(FXAS21002C_REG_F_SETUP, 6, 7), + [F_WMRK] = REG_FIELD(FXAS21002C_REG_F_SETUP, 0, 5), + [F_EVENT] = REG_FIELD(FXAS21002C_REG_F_EVENT, 5, 5), + [FE_TIME] = REG_FIELD(FXAS21002C_REG_F_EVENT, 0, 4), + [F_BOOTEND] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 3, 3), + [F_SRC_FIFO] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 2, 2), + [F_SRC_RT] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 1, 1), + [F_SRC_DRDY] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 0, 0), + [F_WHO_AM_I] = REG_FIELD(FXAS21002C_REG_WHO_AM_I, 0, 7), + [F_BW] = REG_FIELD(FXAS21002C_REG_CTRL0, 6, 7), + [F_SPIW] = REG_FIELD(FXAS21002C_REG_CTRL0, 5, 5), + [F_SEL] = REG_FIELD(FXAS21002C_REG_CTRL0, 3, 4), + [F_HPF_EN] = REG_FIELD(FXAS21002C_REG_CTRL0, 2, 2), + [F_FS] = REG_FIELD(FXAS21002C_REG_CTRL0, 0, 1), + [F_ELE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 3, 3), + [F_ZTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 2, 2), + [F_YTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 1, 1), + [F_XTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 0, 0), + [F_EA] = REG_FIELD(FXAS21002C_REG_RT_SRC, 6, 6), + [F_ZRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, 5, 5), + [F_ZRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, 4, 4), + [F_YRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, 3, 3), + [F_YRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, 2, 2), + [F_XRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, 1, 1), + [F_XRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, 0, 0), + [F_DBCNTM] = REG_FIELD(FXAS21002C_REG_RT_THS, 7, 7), + [F_THS] = REG_FIELD(FXAS21002C_REG_RT_SRC, 0, 6), + [F_RT_COUNT] = REG_FIELD(FXAS21002C_REG_RT_COUNT, 0, 7), + [F_TEMP] = REG_FIELD(FXAS21002C_REG_TEMP, 0, 7), + [F_RST] = REG_FIELD(FXAS21002C_REG_CTRL1, 6, 6), + [F_ST] = REG_FIELD(FXAS21002C_REG_CTRL1, 5, 5), + [F_DR] = REG_FIELD(FXAS21002C_REG_CTRL1, 2, 4), + [F_ACTIVE] = REG_FIELD(FXAS21002C_REG_CTRL1, 1, 1), + [F_READY] = REG_FIELD(FXAS21002C_REG_CTRL1, 0, 0), + [F_INT_CFG_FIFO] = REG_FIELD(FXAS21002C_REG_CTRL2, 7, 7), + [F_INT_EN_FIFO] = REG_FIELD(FXAS21002C_REG_CTRL2, 6, 6), + [F_INT_CFG_RT] = REG_FIELD(FXAS21002C_REG_CTRL2, 5, 5), + [F_INT_EN_RT] = REG_FIELD(FXAS21002C_REG_CTRL2, 4, 4), + [F_INT_CFG_DRDY] = REG_FIELD(FXAS21002C_REG_CTRL2, 3, 3), + [F_INT_EN_DRDY] = REG_FIELD(FXAS21002C_REG_CTRL2, 2, 2), + [F_IPOL] = REG_FIELD(FXAS21002C_REG_CTRL2, 1, 1), + [F_PP_OD] = REG_FIELD(FXAS21002C_REG_CTRL2, 0, 0), + [F_WRAPTOONE] = REG_FIELD(FXAS21002C_REG_CTRL3, 3, 3), + [F_EXTCTRLEN] = REG_FIELD(FXAS21002C_REG_CTRL3, 2, 2), + [F_FS_DOUBLE] = REG_FIELD(FXAS21002C_REG_CTRL3, 0, 0), +}; + +extern const struct dev_pm_ops fxas21002c_pm_ops; + +int fxas21002c_core_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name); +void fxas21002c_core_remove(struct device *dev); +#endif diff --git a/drivers/iio/gyro/fxas21002c_core.c b/drivers/iio/gyro/fxas21002c_core.c new file mode 100644 index 000000000000..dccded203dd5 --- /dev/null +++ b/drivers/iio/gyro/fxas21002c_core.c @@ -0,0 +1,989 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for NXP FXAS21002C Gyroscope - Core + * + * Copyright (C) 2019 Linaro Ltd. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> + +#include <linux/iio/events.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#include "fxas21002c.h" + +#define FXAS21002C_CHIP_ID_1 0xD6 +#define FXAS21002C_CHIP_ID_2 0xD7 + +enum fxas21002c_mode_state { + FXAS21002C_MODE_STANDBY, + FXAS21002C_MODE_READY, + FXAS21002C_MODE_ACTIVE, +}; + +#define FXAS21002C_STANDBY_ACTIVE_TIME_MS 62 +#define FXAS21002C_READY_ACTIVE_TIME_MS 7 + +#define FXAS21002C_ODR_LIST_MAX 10 + +#define FXAS21002C_SCALE_FRACTIONAL 32 +#define FXAS21002C_RANGE_LIMIT_DOUBLE 2000 + +#define FXAS21002C_AXIS_TO_REG(axis) (FXAS21002C_REG_OUT_X_MSB + ((axis) * 2)) + +static const int fxas21002c_odr_values[] = { + 800, 400, 200, 100, 50, 25, 12, 12 +}; + +/* + * These values are taken from the low-pass filter cutoff frequency calculated + * ODR * 0.lpf_values. So, for ODR = 800Hz with a lpf value = 0.32 + * => LPF cutoff frequency = 800 * 0.32 = 256 Hz + */ +static const int fxas21002c_lpf_values[] = { + 32, 16, 8 +}; + +/* + * These values are taken from the high-pass filter cutoff frequency calculated + * ODR * 0.0hpf_values. So, for ODR = 800Hz with a hpf value = 0.018750 + * => HPF cutoff frequency = 800 * 0.018750 = 15 Hz + */ +static const int fxas21002c_hpf_values[] = { + 18750, 9625, 4875, 2475 +}; + +static const int fxas21002c_range_values[] = { + 4000, 2000, 1000, 500, 250 +}; + +struct fxas21002c_data { + u8 chip_id; + enum fxas21002c_mode_state mode; + enum fxas21002c_mode_state prev_mode; + + struct mutex lock; /* serialize data access */ + struct regmap *regmap; + struct regmap_field *regmap_fields[F_MAX_FIELDS]; + struct iio_trigger *dready_trig; + int irq; + + struct regulator *vdd; + struct regulator *vddio; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + s16 buffer[8] ____cacheline_aligned; +}; + +enum fxas21002c_channel_index { + CHANNEL_SCAN_INDEX_X, + CHANNEL_SCAN_INDEX_Y, + CHANNEL_SCAN_INDEX_Z, + CHANNEL_SCAN_MAX, +}; + +static int fxas21002c_odr_hz_from_value(struct fxas21002c_data *data, u8 value) +{ + int odr_value_max = ARRAY_SIZE(fxas21002c_odr_values) - 1; + + value = min_t(u8, value, odr_value_max); + + return fxas21002c_odr_values[value]; +} + +static int fxas21002c_odr_value_from_hz(struct fxas21002c_data *data, + unsigned int hz) +{ + int odr_table_size = ARRAY_SIZE(fxas21002c_odr_values); + int i; + + for (i = 0; i < odr_table_size; i++) + if (fxas21002c_odr_values[i] == hz) + return i; + + return -EINVAL; +} + +static int fxas21002c_lpf_bw_from_value(struct fxas21002c_data *data, u8 value) +{ + int lpf_value_max = ARRAY_SIZE(fxas21002c_lpf_values) - 1; + + value = min_t(u8, value, lpf_value_max); + + return fxas21002c_lpf_values[value]; +} + +static int fxas21002c_lpf_value_from_bw(struct fxas21002c_data *data, + unsigned int hz) +{ + int lpf_table_size = ARRAY_SIZE(fxas21002c_lpf_values); + int i; + + for (i = 0; i < lpf_table_size; i++) + if (fxas21002c_lpf_values[i] == hz) + return i; + + return -EINVAL; +} + +static int fxas21002c_hpf_sel_from_value(struct fxas21002c_data *data, u8 value) +{ + int hpf_value_max = ARRAY_SIZE(fxas21002c_hpf_values) - 1; + + value = min_t(u8, value, hpf_value_max); + + return fxas21002c_hpf_values[value]; +} + +static int fxas21002c_hpf_value_from_sel(struct fxas21002c_data *data, + unsigned int hz) +{ + int hpf_table_size = ARRAY_SIZE(fxas21002c_hpf_values); + int i; + + for (i = 0; i < hpf_table_size; i++) + if (fxas21002c_hpf_values[i] == hz) + return i; + + return -EINVAL; +} + +static int fxas21002c_range_fs_from_value(struct fxas21002c_data *data, + u8 value) +{ + int range_value_max = ARRAY_SIZE(fxas21002c_range_values) - 1; + unsigned int fs_double; + int ret; + + /* We need to check if FS_DOUBLE is enabled to offset the value */ + ret = regmap_field_read(data->regmap_fields[F_FS_DOUBLE], &fs_double); + if (ret < 0) + return ret; + + if (!fs_double) + value += 1; + + value = min_t(u8, value, range_value_max); + + return fxas21002c_range_values[value]; +} + +static int fxas21002c_range_value_from_fs(struct fxas21002c_data *data, + unsigned int range) +{ + int range_table_size = ARRAY_SIZE(fxas21002c_range_values); + bool found = false; + int fs_double = 0; + int ret; + int i; + + for (i = 0; i < range_table_size; i++) + if (fxas21002c_range_values[i] == range) { + found = true; + break; + } + + if (!found) + return -EINVAL; + + if (range > FXAS21002C_RANGE_LIMIT_DOUBLE) + fs_double = 1; + + ret = regmap_field_write(data->regmap_fields[F_FS_DOUBLE], fs_double); + if (ret < 0) + return ret; + + return i; +} + +static int fxas21002c_mode_get(struct fxas21002c_data *data) +{ + unsigned int active; + unsigned int ready; + int ret; + + ret = regmap_field_read(data->regmap_fields[F_ACTIVE], &active); + if (ret < 0) + return ret; + if (active) + return FXAS21002C_MODE_ACTIVE; + + ret = regmap_field_read(data->regmap_fields[F_READY], &ready); + if (ret < 0) + return ret; + if (ready) + return FXAS21002C_MODE_READY; + + return FXAS21002C_MODE_STANDBY; +} + +static int fxas21002c_mode_set(struct fxas21002c_data *data, + enum fxas21002c_mode_state mode) +{ + int ret; + + if (mode == data->mode) + return 0; + + if (mode == FXAS21002C_MODE_READY) + ret = regmap_field_write(data->regmap_fields[F_READY], 1); + else + ret = regmap_field_write(data->regmap_fields[F_READY], 0); + if (ret < 0) + return ret; + + if (mode == FXAS21002C_MODE_ACTIVE) + ret = regmap_field_write(data->regmap_fields[F_ACTIVE], 1); + else + ret = regmap_field_write(data->regmap_fields[F_ACTIVE], 0); + if (ret < 0) + return ret; + + /* if going to active wait the setup times */ + if (mode == FXAS21002C_MODE_ACTIVE && + data->mode == FXAS21002C_MODE_STANDBY) + msleep_interruptible(FXAS21002C_STANDBY_ACTIVE_TIME_MS); + + if (data->mode == FXAS21002C_MODE_READY) + msleep_interruptible(FXAS21002C_READY_ACTIVE_TIME_MS); + + data->prev_mode = data->mode; + data->mode = mode; + + return ret; +} + +static int fxas21002c_write(struct fxas21002c_data *data, + enum fxas21002c_fields field, int bits) +{ + int actual_mode; + int ret; + + mutex_lock(&data->lock); + + actual_mode = fxas21002c_mode_get(data); + if (actual_mode < 0) { + ret = actual_mode; + goto out_unlock; + } + + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_READY); + if (ret < 0) + goto out_unlock; + + ret = regmap_field_write(data->regmap_fields[field], bits); + if (ret < 0) + goto out_unlock; + + ret = fxas21002c_mode_set(data, data->prev_mode); + +out_unlock: + mutex_unlock(&data->lock); + + return ret; +} + +static int fxas21002c_pm_get(struct fxas21002c_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + int ret; + + ret = pm_runtime_get_sync(dev); + if (ret < 0) + pm_runtime_put_noidle(dev); + + return ret; +} + +static int fxas21002c_pm_put(struct fxas21002c_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + + pm_runtime_mark_last_busy(dev); + + return pm_runtime_put_autosuspend(dev); +} + +static int fxas21002c_temp_get(struct fxas21002c_data *data, int *val) +{ + struct device *dev = regmap_get_device(data->regmap); + unsigned int temp; + int ret; + + mutex_lock(&data->lock); + ret = fxas21002c_pm_get(data); + if (ret < 0) + goto data_unlock; + + ret = regmap_field_read(data->regmap_fields[F_TEMP], &temp); + if (ret < 0) { + dev_err(dev, "failed to read temp: %d\n", ret); + goto data_unlock; + } + + *val = sign_extend32(temp, 7); + + ret = fxas21002c_pm_put(data); + if (ret < 0) + goto data_unlock; + + ret = IIO_VAL_INT; + +data_unlock: + mutex_unlock(&data->lock); + + return ret; +} + +static int fxas21002c_axis_get(struct fxas21002c_data *data, + int index, int *val) +{ + struct device *dev = regmap_get_device(data->regmap); + __be16 axis_be; + int ret; + + mutex_lock(&data->lock); + ret = fxas21002c_pm_get(data); + if (ret < 0) + goto data_unlock; + + ret = regmap_bulk_read(data->regmap, FXAS21002C_AXIS_TO_REG(index), + &axis_be, sizeof(axis_be)); + if (ret < 0) { + dev_err(dev, "failed to read axis: %d: %d\n", index, ret); + goto data_unlock; + } + + *val = sign_extend32(be16_to_cpu(axis_be), 15); + + ret = fxas21002c_pm_put(data); + if (ret < 0) + goto data_unlock; + + ret = IIO_VAL_INT; + +data_unlock: + mutex_unlock(&data->lock); + + return ret; +} + +static int fxas21002c_odr_get(struct fxas21002c_data *data, int *odr) +{ + unsigned int odr_bits; + int ret; + + mutex_lock(&data->lock); + ret = regmap_field_read(data->regmap_fields[F_DR], &odr_bits); + if (ret < 0) + goto data_unlock; + + *odr = fxas21002c_odr_hz_from_value(data, odr_bits); + + ret = IIO_VAL_INT; + +data_unlock: + mutex_unlock(&data->lock); + + return ret; +} + +static int fxas21002c_odr_set(struct fxas21002c_data *data, int odr) +{ + int odr_bits; + + odr_bits = fxas21002c_odr_value_from_hz(data, odr); + if (odr_bits < 0) + return odr_bits; + + return fxas21002c_write(data, F_DR, odr_bits); +} + +static int fxas21002c_lpf_get(struct fxas21002c_data *data, int *val2) +{ + unsigned int bw_bits; + int ret; + + mutex_lock(&data->lock); + ret = regmap_field_read(data->regmap_fields[F_BW], &bw_bits); + if (ret < 0) + goto data_unlock; + + *val2 = fxas21002c_lpf_bw_from_value(data, bw_bits) * 10000; + + ret = IIO_VAL_INT_PLUS_MICRO; + +data_unlock: + mutex_unlock(&data->lock); + + return ret; +} + +static int fxas21002c_lpf_set(struct fxas21002c_data *data, int bw) +{ + int bw_bits; + int odr; + int ret; + + bw_bits = fxas21002c_lpf_value_from_bw(data, bw); + if (bw_bits < 0) + return bw_bits; + + /* + * From table 33 of the device spec, for ODR = 25Hz and 12.5 value 0.08 + * is not allowed and for ODR = 12.5 value 0.16 is also not allowed + */ + ret = fxas21002c_odr_get(data, &odr); + if (ret < 0) + return -EINVAL; + + if ((odr == 25 && bw_bits > 0x01) || (odr == 12 && bw_bits > 0)) + return -EINVAL; + + return fxas21002c_write(data, F_BW, bw_bits); +} + +static int fxas21002c_hpf_get(struct fxas21002c_data *data, int *val2) +{ + unsigned int sel_bits; + int ret; + + mutex_lock(&data->lock); + ret = regmap_field_read(data->regmap_fields[F_SEL], &sel_bits); + if (ret < 0) + goto data_unlock; + + *val2 = fxas21002c_hpf_sel_from_value(data, sel_bits); + + ret = IIO_VAL_INT_PLUS_MICRO; + +data_unlock: + mutex_unlock(&data->lock); + + return ret; +} + +static int fxas21002c_hpf_set(struct fxas21002c_data *data, int sel) +{ + int sel_bits; + + sel_bits = fxas21002c_hpf_value_from_sel(data, sel); + if (sel_bits < 0) + return sel_bits; + + return fxas21002c_write(data, F_SEL, sel_bits); +} + +static int fxas21002c_scale_get(struct fxas21002c_data *data, int *val) +{ + int fs_bits; + int scale; + int ret = 0; + + mutex_lock(&data->lock); + ret = regmap_field_read(data->regmap_fields[F_FS], &fs_bits); + if (ret < 0) + goto data_unlock; + + scale = fxas21002c_range_fs_from_value(data, fs_bits); + if (scale < 0) { + ret = scale; + goto data_unlock; + } + + *val = scale; + +data_unlock: + mutex_unlock(&data->lock); + + return ret; +} + +static int fxas21002c_scale_set(struct fxas21002c_data *data, int range) +{ + int fs_bits; + + fs_bits = fxas21002c_range_value_from_fs(data, range); + if (fs_bits < 0) + return fs_bits; + + return fxas21002c_write(data, F_FS, fs_bits); +} + +static int fxas21002c_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct fxas21002c_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_TEMP: + return fxas21002c_temp_get(data, val); + case IIO_ANGL_VEL: + return fxas21002c_axis_get(data, chan->scan_index, val); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL_VEL: + *val2 = FXAS21002C_SCALE_FRACTIONAL; + ret = fxas21002c_scale_get(data, val); + if (ret < 0) + return ret; + + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + *val = 0; + return fxas21002c_lpf_get(data, val2); + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: + *val = 0; + return fxas21002c_hpf_get(data, val2); + case IIO_CHAN_INFO_SAMP_FREQ: + *val2 = 0; + return fxas21002c_odr_get(data, val); + default: + return -EINVAL; + } +} + +static int fxas21002c_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct fxas21002c_data *data = iio_priv(indio_dev); + int range; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + if (val2) + return -EINVAL; + + return fxas21002c_odr_set(data, val); + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + if (val) + return -EINVAL; + + val2 = val2 / 10000; + return fxas21002c_lpf_set(data, val2); + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL_VEL: + range = (((val * 1000 + val2 / 1000) * + FXAS21002C_SCALE_FRACTIONAL) / 1000); + return fxas21002c_scale_set(data, range); + default: + return -EINVAL; + } + case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY: + return fxas21002c_hpf_set(data, val2); + default: + return -EINVAL; + } +} + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("12.5 25 50 100 200 400 800"); + +static IIO_CONST_ATTR(in_anglvel_filter_low_pass_3db_frequency_available, + "0.32 0.16 0.08"); + +static IIO_CONST_ATTR(in_anglvel_filter_high_pass_3db_frequency_available, + "0.018750 0.009625 0.004875 0.002475"); + +static IIO_CONST_ATTR(in_anglvel_scale_available, + "125.0 62.5 31.25 15.625 7.8125"); + +static struct attribute *fxas21002c_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_const_attr_in_anglvel_filter_low_pass_3db_frequency_available.dev_attr.attr, + &iio_const_attr_in_anglvel_filter_high_pass_3db_frequency_available.dev_attr.attr, + &iio_const_attr_in_anglvel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group fxas21002c_attrs_group = { + .attrs = fxas21002c_attributes, +}; + +#define FXAS21002C_CHANNEL(_axis) { \ + .type = IIO_ANGL_VEL, \ + .modified = 1, \ + .channel2 = IIO_MOD_##_axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \ + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = CHANNEL_SCAN_INDEX_##_axis, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +static const struct iio_chan_spec fxas21002c_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .scan_index = -1, + }, + FXAS21002C_CHANNEL(X), + FXAS21002C_CHANNEL(Y), + FXAS21002C_CHANNEL(Z), +}; + +static const struct iio_info fxas21002c_info = { + .attrs = &fxas21002c_attrs_group, + .read_raw = &fxas21002c_read_raw, + .write_raw = &fxas21002c_write_raw, +}; + +static irqreturn_t fxas21002c_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct fxas21002c_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->lock); + ret = regmap_bulk_read(data->regmap, FXAS21002C_REG_OUT_X_MSB, + data->buffer, CHANNEL_SCAN_MAX * sizeof(s16)); + mutex_unlock(&data->lock); + if (ret < 0) + goto notify_done; + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + pf->timestamp); + +notify_done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int fxas21002c_chip_init(struct fxas21002c_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + unsigned int chip_id; + int ret; + + ret = regmap_field_read(data->regmap_fields[F_WHO_AM_I], &chip_id); + if (ret < 0) + return ret; + + if (chip_id != FXAS21002C_CHIP_ID_1 && + chip_id != FXAS21002C_CHIP_ID_2) { + dev_err(dev, "chip id 0x%02x is not supported\n", chip_id); + return -EINVAL; + } + + data->chip_id = chip_id; + + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY); + if (ret < 0) + return ret; + + /* Set ODR to 200HZ as default */ + ret = fxas21002c_odr_set(data, 200); + if (ret < 0) + dev_err(dev, "failed to set ODR: %d\n", ret); + + return ret; +} + +static int fxas21002c_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct fxas21002c_data *data = iio_priv(indio_dev); + + return regmap_field_write(data->regmap_fields[F_INT_EN_DRDY], state); +} + +static const struct iio_trigger_ops fxas21002c_trigger_ops = { + .set_trigger_state = &fxas21002c_data_rdy_trigger_set_state, +}; + +static irqreturn_t fxas21002c_data_rdy_trig_poll(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct fxas21002c_data *data = iio_priv(indio_dev); + unsigned int data_ready; + int ret; + + ret = regmap_field_read(data->regmap_fields[F_SRC_DRDY], &data_ready); + if (ret < 0) + return IRQ_NONE; + + if (!data_ready) + return IRQ_NONE; + + iio_trigger_poll(data->dready_trig); + + return IRQ_HANDLED; +} + +static int fxas21002c_trigger_probe(struct fxas21002c_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct device_node *np = indio_dev->dev.of_node; + unsigned long irq_trig; + bool irq_open_drain; + int irq1; + int ret; + + if (!data->irq) + return 0; + + irq1 = of_irq_get_byname(np, "INT1"); + + if (irq1 == data->irq) { + dev_info(dev, "using interrupt line INT1\n"); + ret = regmap_field_write(data->regmap_fields[F_INT_CFG_DRDY], + 1); + if (ret < 0) + return ret; + } + + dev_info(dev, "using interrupt line INT2\n"); + + irq_open_drain = of_property_read_bool(np, "drive-open-drain"); + + data->dready_trig = devm_iio_trigger_alloc(dev, "%s-dev%d", + indio_dev->name, + indio_dev->id); + if (!data->dready_trig) + return -ENOMEM; + + irq_trig = IRQF_TRIGGER_RISING; + if (irq_open_drain) + irq_trig |= IRQF_SHARED; + + ret = devm_request_irq(dev, data->irq, fxas21002c_data_rdy_trig_poll, + irq_trig, "fxas21002c_data_ready", + data->dready_trig); + if (ret < 0) + return ret; + + data->dready_trig->dev.parent = dev; + data->dready_trig->ops = &fxas21002c_trigger_ops; + iio_trigger_set_drvdata(data->dready_trig, indio_dev); + + return devm_iio_trigger_register(dev, data->dready_trig); +} + +static int fxas21002c_power_enable(struct fxas21002c_data *data) +{ + int ret; + + ret = regulator_enable(data->vdd); + if (ret < 0) + return ret; + + return regulator_enable(data->vddio); +} + +static void fxas21002c_power_disable(struct fxas21002c_data *data) +{ + regulator_disable(data->vdd); + regulator_disable(data->vddio); +} + +static void fxas21002c_power_disable_action(void *_data) +{ + struct fxas21002c_data *data = _data; + + fxas21002c_power_disable(data); +} + +static int fxas21002c_regulators_get(struct fxas21002c_data *data) +{ + struct device *dev = regmap_get_device(data->regmap); + + data->vdd = devm_regulator_get(dev->parent, "vdd"); + if (IS_ERR(data->vdd)) + return PTR_ERR(data->vdd); + + data->vddio = devm_regulator_get(dev->parent, "vddio"); + if (IS_ERR(data->vddio)) + return PTR_ERR(data->vddio); + + return 0; +} + +int fxas21002c_core_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name) +{ + struct fxas21002c_data *data; + struct iio_dev *indio_dev; + struct regmap_field *f; + int i; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + dev_set_drvdata(dev, indio_dev); + data->irq = irq; + data->regmap = regmap; + + for (i = 0; i < F_MAX_FIELDS; i++) { + f = devm_regmap_field_alloc(dev, data->regmap, + fxas21002c_reg_fields[i]); + if (IS_ERR(f)) + return PTR_ERR(f); + + data->regmap_fields[i] = f; + } + + mutex_init(&data->lock); + + ret = fxas21002c_regulators_get(data); + if (ret < 0) + return ret; + + ret = devm_add_action(dev, fxas21002c_power_disable_action, data); + if (ret < 0) + return ret; + + ret = fxas21002c_power_enable(data); + if (ret < 0) + return ret; + + ret = fxas21002c_chip_init(data); + if (ret < 0) + return ret; + + indio_dev->dev.parent = dev; + indio_dev->channels = fxas21002c_channels; + indio_dev->num_channels = ARRAY_SIZE(fxas21002c_channels); + indio_dev->name = name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &fxas21002c_info; + + ret = fxas21002c_trigger_probe(data); + if (ret < 0) + return ret; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, + iio_pollfunc_store_time, + fxas21002c_trigger_handler, NULL); + if (ret < 0) + return ret; + + ret = pm_runtime_set_active(dev); + if (ret) + return ret; + + pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, 2000); + pm_runtime_use_autosuspend(dev); + + ret = devm_iio_device_register(dev, indio_dev); + if (ret < 0) + return ret; + + dev_info(dev, "fxas21002c iio device ready\n"); + + return 0; +} +EXPORT_SYMBOL_GPL(fxas21002c_core_probe); + +void fxas21002c_core_remove(struct device *dev) +{ + struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev)); + + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + pm_runtime_put_noidle(dev); + + fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY); + fxas21002c_power_disable(data); +} +EXPORT_SYMBOL_GPL(fxas21002c_core_remove); + +static int __maybe_unused fxas21002c_suspend(struct device *dev) +{ + struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev)); + + fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY); + fxas21002c_power_disable(data); + + return 0; +} + +static int __maybe_unused fxas21002c_resume(struct device *dev) +{ + struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev)); + int ret; + + ret = fxas21002c_power_enable(data); + if (ret < 0) + return ret; + + ret = fxas21002c_mode_set(data, data->prev_mode); + if (ret < 0) + return ret; + + return 0; +} + +static int __maybe_unused fxas21002c_runtime_suspend(struct device *dev) +{ + struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev)); + int ret; + + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_READY); + if (ret < 0) + return -EAGAIN; + + return 0; +} + +static int __maybe_unused fxas21002c_runtime_resume(struct device *dev) +{ + struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev)); + int ret; + + ret = fxas21002c_mode_set(data, FXAS21002C_MODE_ACTIVE); + if (ret < 0) + return ret; + + return 0; +} + +const struct dev_pm_ops fxas21002c_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fxas21002c_suspend, fxas21002c_resume) + SET_RUNTIME_PM_OPS(fxas21002c_runtime_suspend, + fxas21002c_runtime_resume, NULL) +}; +EXPORT_SYMBOL_GPL(fxas21002c_pm_ops); + +MODULE_AUTHOR("Rui Miguel Silva <rui.silva@linaro.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("FXAS21002C Gyro driver");
Add core support for the NXP fxas21002c Tri-axis gyroscope, using the iio subsystem. It supports PM operations, axis reading, temperature, scale factor of the axis, high pass and low pass filtering, and sampling frequency selection. It will have extras modules to support the communication over i2c and spi. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> --- drivers/iio/gyro/Kconfig | 11 + drivers/iio/gyro/Makefile | 1 + drivers/iio/gyro/fxas21002c.h | 151 +++++ drivers/iio/gyro/fxas21002c_core.c | 989 +++++++++++++++++++++++++++++ 4 files changed, 1152 insertions(+) create mode 100644 drivers/iio/gyro/fxas21002c.h create mode 100644 drivers/iio/gyro/fxas21002c_core.c