diff mbox series

[5/5] iio: amplifiers: ad8366: Add support for ADL5240 VGA

Message ID 20190530131812.3476-5-alexandru.ardelean@analog.com (mailing list archive)
State New, archived
Headers show
Series [1/5] iio: amplifiers: update license information | expand

Commit Message

Alexandru Ardelean May 30, 2019, 1:18 p.m. UTC 
The ADL5240 is a high performance, digitally controlled variable gain
amplifier (VGA) operating from 100 MHz to 4000 MHz. The VGA integrates a
high performance, 20 dB gain, internally matched amplifier (AMP) with a
6-bit digital step attenuator (DSA) that has a gain control range of
31.5 dB in 0.5 dB steps with ±0.25 dB step accuracy.

Datasheet link:
  https://www.analog.com/media/en/technical-documentation/data-sheets/adl5240.pdf

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
 drivers/iio/amplifiers/Kconfig  |  1 +
 drivers/iio/amplifiers/ad8366.c | 17 +++++++++++++++++
 2 files changed, 18 insertions(+)

Comments

Jonathan Cameron June 8, 2019, 2:05 p.m. UTC | #1 
On Thu, 30 May 2019 16:18:12 +0300
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:

> The ADL5240 is a high performance, digitally controlled variable gain
> amplifier (VGA) operating from 100 MHz to 4000 MHz. The VGA integrates a
> high performance, 20 dB gain, internally matched amplifier (AMP) with a
> 6-bit digital step attenuator (DSA) that has a gain control range of
> 31.5 dB in 0.5 dB steps with ±0.25 dB step accuracy.
> 
> Datasheet link:
>   https://www.analog.com/media/en/technical-documentation/data-sheets/adl5240.pdf
> 
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> ---
>  drivers/iio/amplifiers/Kconfig  |  1 +
>  drivers/iio/amplifiers/ad8366.c | 17 +++++++++++++++++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig
> index 259058da8811..871e8060d996 100644
> --- a/drivers/iio/amplifiers/Kconfig
> +++ b/drivers/iio/amplifiers/Kconfig
> @@ -16,6 +16,7 @@ config AD8366
>  	  from Analog Devices:
>  	    AD8366 Dual-Digital Variable Gain Amplifier (VGA)
>  	    ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
> +	    ADL5240 Digitally controlled variable gain amplifier (VGA)
>  
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ad8366.
> diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c
> index 0a9883e8eb2e..0176d3d8cc9c 100644
> --- a/drivers/iio/amplifiers/ad8366.c
> +++ b/drivers/iio/amplifiers/ad8366.c
> @@ -4,6 +4,7 @@
>   * This driver supports the following gain amplifiers:
>   *   AD8366 Dual-Digital Variable Gain Amplifier (VGA)
>   *   ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
> + *   ADL5240 Digitally controlled variable gain amplifier (VGA)
>   *
>   * Copyright 2012-2019 Analog Devices Inc.
>   */
> @@ -25,6 +26,7 @@
>  enum ad8366_type {
>  	ID_AD8366,
>  	ID_ADA4961,
> +	ID_ADL5240,
>  };
>  
>  struct ad8366_info {
> @@ -56,6 +58,10 @@ static struct ad8366_info ad8366_infos[] = {
>  		.gain_min = -6000,
>  		.gain_max = 15000,
>  	},
> +	[ID_ADL5240] = {
> +		.gain_min = -11500,
> +		.gain_max = 20000,
> +	},
>  };
>  
>  static int ad8366_write(struct iio_dev *indio_dev,
> @@ -75,6 +81,9 @@ static int ad8366_write(struct iio_dev *indio_dev,
>  	case ID_ADA4961:
>  		st->data[0] = ch_a & 0x1F;
>  		break;
> +	case ID_ADL5240:
> +		st->data[0] = (ch_a & 0x3F);
> +		break;
>  	}
>  
>  	ret = spi_write(st->spi, st->data, indio_dev->num_channels);
> @@ -106,6 +115,9 @@ static int ad8366_read_raw(struct iio_dev *indio_dev,
>  		case ID_ADA4961:
>  			gain = 15000 - code * 1000;
>  			break;
> +		case ID_ADL5240:
> +			gain = 20000 - 31500 + code * 500;
> +			break;
>  		}
>  
>  		/* Values in dB */
> @@ -149,6 +161,9 @@ static int ad8366_write_raw(struct iio_dev *indio_dev,
>  	case ID_ADA4961:
>  		code = (15000 - gain) / 1000;
>  		break;
> +	case ID_ADL5240:
> +		code = ((gain - 500 - 20000) / 500) & 0x3F;
> +		break;
>  	}
>  
>  	mutex_lock(&st->lock);
> @@ -217,6 +232,7 @@ static int ad8366_probe(struct spi_device *spi)
>  		indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
>  		break;
>  	case ID_ADA4961:
> +	case ID_ADL5240:
>  		st->reset_gpio = devm_gpiod_get(&spi->dev, "reset",
>  			GPIOD_OUT_HIGH);
>  		indio_dev->channels = ada4961_channels;
> @@ -268,6 +284,7 @@ static int ad8366_remove(struct spi_device *spi)
>  static const struct spi_device_id ad8366_id[] = {
>  	{"ad8366",  ID_AD8366},
>  	{"ada4961", ID_ADA4961},
> +	{"adl5240", ID_ADL5240},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(spi, ad8366_id);
diff mbox series

Patch

diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig
index 259058da8811..871e8060d996 100644
--- a/drivers/iio/amplifiers/Kconfig
+++ b/drivers/iio/amplifiers/Kconfig
@@ -16,6 +16,7 @@  config AD8366
 	  from Analog Devices:
 	    AD8366 Dual-Digital Variable Gain Amplifier (VGA)
 	    ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
+	    ADL5240 Digitally controlled variable gain amplifier (VGA)
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad8366.
diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c
index 0a9883e8eb2e..0176d3d8cc9c 100644
--- a/drivers/iio/amplifiers/ad8366.c
+++ b/drivers/iio/amplifiers/ad8366.c
@@ -4,6 +4,7 @@ 
  * This driver supports the following gain amplifiers:
  *   AD8366 Dual-Digital Variable Gain Amplifier (VGA)
  *   ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
+ *   ADL5240 Digitally controlled variable gain amplifier (VGA)
  *
  * Copyright 2012-2019 Analog Devices Inc.
  */
@@ -25,6 +26,7 @@ 
 enum ad8366_type {
 	ID_AD8366,
 	ID_ADA4961,
+	ID_ADL5240,
 };
 
 struct ad8366_info {
@@ -56,6 +58,10 @@  static struct ad8366_info ad8366_infos[] = {
 		.gain_min = -6000,
 		.gain_max = 15000,
 	},
+	[ID_ADL5240] = {
+		.gain_min = -11500,
+		.gain_max = 20000,
+	},
 };
 
 static int ad8366_write(struct iio_dev *indio_dev,
@@ -75,6 +81,9 @@  static int ad8366_write(struct iio_dev *indio_dev,
 	case ID_ADA4961:
 		st->data[0] = ch_a & 0x1F;
 		break;
+	case ID_ADL5240:
+		st->data[0] = (ch_a & 0x3F);
+		break;
 	}
 
 	ret = spi_write(st->spi, st->data, indio_dev->num_channels);
@@ -106,6 +115,9 @@  static int ad8366_read_raw(struct iio_dev *indio_dev,
 		case ID_ADA4961:
 			gain = 15000 - code * 1000;
 			break;
+		case ID_ADL5240:
+			gain = 20000 - 31500 + code * 500;
+			break;
 		}
 
 		/* Values in dB */
@@ -149,6 +161,9 @@  static int ad8366_write_raw(struct iio_dev *indio_dev,
 	case ID_ADA4961:
 		code = (15000 - gain) / 1000;
 		break;
+	case ID_ADL5240:
+		code = ((gain - 500 - 20000) / 500) & 0x3F;
+		break;
 	}
 
 	mutex_lock(&st->lock);
@@ -217,6 +232,7 @@  static int ad8366_probe(struct spi_device *spi)
 		indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
 		break;
 	case ID_ADA4961:
+	case ID_ADL5240:
 		st->reset_gpio = devm_gpiod_get(&spi->dev, "reset",
 			GPIOD_OUT_HIGH);
 		indio_dev->channels = ada4961_channels;
@@ -268,6 +284,7 @@  static int ad8366_remove(struct spi_device *spi)
 static const struct spi_device_id ad8366_id[] = {
 	{"ad8366",  ID_AD8366},
 	{"ada4961", ID_ADA4961},
+	{"adl5240", ID_ADL5240},
 	{}
 };
 MODULE_DEVICE_TABLE(spi, ad8366_id);