@@ -155,6 +155,11 @@
* The DOUT/RDY output must also be wired to an interrupt capable GPIO.
*/
+enum {
+ AD7192_SYSCALIB_ZERO_SCALE,
+ AD7192_SYSCALIB_FULL_SCALE,
+};
+
struct ad7192_state {
struct regulator *avdd;
struct regulator *dvdd;
@@ -169,10 +174,56 @@ struct ad7192_state {
u8 devid;
u8 clock_sel;
struct mutex lock; /* protect sensor state */
+ u8 syscalib_mode[8];
struct ad_sigma_delta sd;
};
+static const char * const ad7192_syscalib_modes[] = {
+ [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale",
+ [AD7192_SYSCALIB_FULL_SCALE] = "full_scale",
+};
+
+static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ unsigned int mode)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+ int ret;
+
+ st->syscalib_mode[chan->channel] = mode;
+
+ if (mode == AD7192_SYSCALIB_ZERO_SCALE)
+ ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO,
+ chan->address);
+ else
+ ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL,
+ chan->address);
+
+ return ret;
+}
+
+static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+
+ return st->syscalib_mode[chan->channel];
+}
+
+static const struct iio_enum ad7192_syscalib_mode_enum = {
+ .items = ad7192_syscalib_modes,
+ .num_items = ARRAY_SIZE(ad7192_syscalib_modes),
+ .set = ad7192_set_syscalib_mode,
+ .get = ad7192_get_syscalib_mode
+};
+
+static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = {
+ IIO_ENUM("system_calibration", IIO_SEPARATE, &ad7192_syscalib_mode_enum),
+ IIO_ENUM_AVAILABLE("system_calibration", &ad7192_syscalib_mode_enum),
+ {}
+};
+
static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd)
{
return container_of(sd, struct ad7192_state, sd);
@@ -769,9 +820,11 @@ static int ad7192_channels_config(struct iio_dev *indio_dev)
*chan = channels[i];
chan->info_mask_shared_by_all |=
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY);
- if (chan->type != IIO_TEMP)
+ if (chan->type != IIO_TEMP) {
chan->info_mask_shared_by_type_available |=
BIT(IIO_CHAN_INFO_SCALE);
+ chan->ext_info = ad7192_calibsys_ext_info;
+ }
chan++;
}
This patch will add a system calibration attribute for each channel. Using this option the user will have the ability to calibrate each channel for zero scale and full scale. It uses the iio_chan_spec_ext_info and IIO_ENUM to implement the functionality. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> --- drivers/staging/iio/adc/ad7192.c | 55 +++++++++++++++++++++++++++++++- 1 file changed, 54 insertions(+), 1 deletion(-)