| Message ID | 20190903051802.22716-1-martin.kepplinger@puri.sm (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: imu: st_lsm6dsx: replace underscore with hyphen in device name | expand |
+CC Greg as fix for a patch in my outstanding pull request. On Tue, 3 Sep 2019 07:18:02 +0200 Martin Kepplinger <martin.kepplinger@puri.sm> wrote: > With the underscore character in the lsm9ds1_imu device name, we get the > following error below, so use a dash, just like the other device names do too. > > [ 3.961399] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 > [ 4.010581] Mem abort info: > [ 4.013838] ESR = 0x96000004 > [ 4.023602] Exception class = DABT (current EL), IL = 32 bits > [ 4.047993] SET = 0, FnV = 0 > [ 4.052690] EA = 0, S1PTW = 0 > [ 4.056015] Data abort info: > [ 4.059020] ISV = 0, ISS = 0x00000004 > [ 4.080106] CM = 0, WnR = 0 > [ 4.085237] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e4f61000 > [ 4.092194] [0000000000000018] pgd=0000000000000000 > [ 4.097474] Internal error: Oops: 96000004 [#1] PREEMPT SMP > [ 4.103286] Modules linked in: tcpci st_sensors st_lsm6dsx_i2c(+) tcpm st_lsm6dsx industrialio_triggered_buffer kfifo_buf vcnl4000 roles typec goodix snd_soc_sgtl5000 bq25890_charger snvs_pwrkey imx_sdma virt_dma qoriq_thermal imx2_wdt snd_soc_fsl_sai aes_ce_blk imx_pcm_dma crypto_simd watchdog crct10dif_ce ghash_ce sha2_ce snd_soc_simple_card snd_soc_gtm601 snd_soc_simple_card_utils sha1_ce snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore gpio_vibra usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite ip_tables x_tables ipv6 nf_defrag_ipv6 xhci_plat_hcd xhci_hcd usbcore dwc3 ulpi udc_core usb_common phy_fsl_imx8mq_usb > [ 4.105389] bq25890-charger 0-006b: Capacity for 3784000 is 86% > [ 4.164061] CPU: 1 PID: 344 Comm: systemd-udevd Tainted: G W 5.3.0-rc2-g24e3d989d49f-dirty #161 > [ 4.164063] Hardware name: Purism Librem 5 devkit (DT) > [ 4.164067] pstate: 80000005 (Nzcv daif -PAN -UAO) > [ 4.164082] pc : st_lsm6dsx_i2c_probe+0x18/0x80 [st_lsm6dsx_i2c] > [ 4.164093] lr : i2c_device_probe+0x1f0/0x2b8 > [ 4.164094] sp : ffff8000a499f970 > [ 4.164097] x29: ffff8000a499f970 x28: 0000000000000000 > [ 4.164100] x27: ffff000010b70000 x26: ffff8000a499fd68 > [ 4.164104] x25: ffff000010860000 x24: ffff000008a8b038 > [ 4.164108] x23: ffff000008a8b038 x22: ffff000008a8b000 > [ 4.164111] x21: ffff8000a55b2400 x20: ffff000008a89000 > [ 4.164115] x19: ffff8000a55b2400 x18: ffffffffffffffff > [ 4.164118] x17: 0000000000000000 x16: 0000000000000000 > [ 4.164121] x15: 0000000000040000 x14: 00000000fffffff0 > [ 4.164125] x13: ffff000010b6c898 x12: 0000000000000030 > [ 4.164128] x11: 0000000000000000 x10: 0101010101010101 > [ 4.260542] x9 : fffffffffffffffc x8 : 0000000000000008 > [ 4.266073] x7 : 0000000000000004 x6 : 1e0e1a00f2ade4ef > [ 4.271605] x5 : 6f642d72001a0e1e x4 : 8080808000000000 > [ 4.277136] x3 : 0000000000000000 x2 : ffff000008a8a000 > [ 4.282667] x1 : 0000000000000000 x0 : ffff8000a55b2400 > [ 4.288199] Call trace: > [ 4.290753] st_lsm6dsx_i2c_probe+0x18/0x80 [st_lsm6dsx_i2c] > [ 4.296648] i2c_device_probe+0x1f0/0x2b8 > [ 4.300825] really_probe+0x168/0x368 > [ 4.304638] driver_probe_device.part.2+0x10c/0x128 > [ 4.309716] device_driver_attach+0x74/0xa0 > [ 4.314071] __driver_attach+0x84/0x130 > [ 4.318065] bus_for_each_dev+0x68/0xc8 > [ 4.322058] driver_attach+0x20/0x28 > [ 4.325780] bus_add_driver+0xd4/0x1f8 > [ 4.329683] driver_register+0x60/0x110 > [ 4.333677] i2c_register_driver+0x44/0x98 > [ 4.337944] st_lsm6dsx_driver_init+0x1c/0x1000 [st_lsm6dsx_i2c] > [ 4.344200] do_one_initcall+0x58/0x1a8 > [ 4.348195] do_init_module+0x54/0x1d4 > [ 4.352098] load_module+0x1998/0x1c40 > [ 4.356001] __se_sys_finit_module+0xc0/0xd8 > [ 4.360446] __arm64_sys_finit_module+0x14/0x20 > [ 4.365166] el0_svc_common.constprop.0+0xb0/0x168 > [ 4.370154] el0_svc_handler+0x18/0x20 > [ 4.374056] el0_svc+0x8/0xc > [ 4.377059] Code: d2800003 910003fd a90153f3 aa0003f3 (f9400c34) > [ 4.383406] ---[ end trace 6dfe010c028e3371 ]--- > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Fixes: a106864fd667 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1") Thanks Martin. This one is entirely my fault for messing up tweaking that naming. I should have bounced the patch back for another round rather than thinking "it's trivial, what could possibly go wrong!" On basis Greg may prefer to pick this one directly: Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Convenient lore.kernel.org link. https://lore.kernel.org/linux-iio/20190903051802.22716-1-martin.kepplinger@puri.sm/T/#u If not I'll pick it up for first set of fixes post rc1. As for the question below, I've not taken a look yet and certainly seems an odd result! Thanks, Jonathan > --- > > While this patch fixes my (formerly already mentioned) issue, it's > a question actually: Why does is this underscore character a problem? > > thanks, > > martin > > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > index 5e3cd96b0059..80e42c7dbcbe 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > @@ -24,7 +24,7 @@ > #define ST_LSM6DSR_DEV_NAME "lsm6dsr" > #define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c" > #define ST_ISM330DHCX_DEV_NAME "ism330dhcx" > -#define ST_LSM9DS1_DEV_NAME "lsm9ds1_imu" > +#define ST_LSM9DS1_DEV_NAME "lsm9ds1-imu" > > enum st_lsm6dsx_hw_id { > ST_LSM6DS3_ID,
On 03.09.19 14:43, Jonathan Cameron wrote: > +CC Greg as fix for a patch in my outstanding pull request. > > On Tue, 3 Sep 2019 07:18:02 +0200 > Martin Kepplinger <martin.kepplinger@puri.sm> wrote: > >> With the underscore character in the lsm9ds1_imu device name, we get the >> following error below, so use a dash, just like the other device names do too. >> >> [ 3.961399] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 >> [ 4.010581] Mem abort info: >> [ 4.013838] ESR = 0x96000004 >> [ 4.023602] Exception class = DABT (current EL), IL = 32 bits >> [ 4.047993] SET = 0, FnV = 0 >> [ 4.052690] EA = 0, S1PTW = 0 >> [ 4.056015] Data abort info: >> [ 4.059020] ISV = 0, ISS = 0x00000004 >> [ 4.080106] CM = 0, WnR = 0 >> [ 4.085237] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e4f61000 >> [ 4.092194] [0000000000000018] pgd=0000000000000000 >> [ 4.097474] Internal error: Oops: 96000004 [#1] PREEMPT SMP >> [ 4.103286] Modules linked in: tcpci st_sensors st_lsm6dsx_i2c(+) tcpm st_lsm6dsx industrialio_triggered_buffer kfifo_buf vcnl4000 roles typec goodix snd_soc_sgtl5000 bq25890_charger snvs_pwrkey imx_sdma virt_dma qoriq_thermal imx2_wdt snd_soc_fsl_sai aes_ce_blk imx_pcm_dma crypto_simd watchdog crct10dif_ce ghash_ce sha2_ce snd_soc_simple_card snd_soc_gtm601 snd_soc_simple_card_utils sha1_ce snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore gpio_vibra usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite ip_tables x_tables ipv6 nf_defrag_ipv6 xhci_plat_hcd xhci_hcd usbcore dwc3 ulpi udc_core usb_common phy_fsl_imx8mq_usb >> [ 4.105389] bq25890-charger 0-006b: Capacity for 3784000 is 86% >> [ 4.164061] CPU: 1 PID: 344 Comm: systemd-udevd Tainted: G W 5.3.0-rc2-g24e3d989d49f-dirty #161 >> [ 4.164063] Hardware name: Purism Librem 5 devkit (DT) >> [ 4.164067] pstate: 80000005 (Nzcv daif -PAN -UAO) >> [ 4.164082] pc : st_lsm6dsx_i2c_probe+0x18/0x80 [st_lsm6dsx_i2c] >> [ 4.164093] lr : i2c_device_probe+0x1f0/0x2b8 >> [ 4.164094] sp : ffff8000a499f970 >> [ 4.164097] x29: ffff8000a499f970 x28: 0000000000000000 >> [ 4.164100] x27: ffff000010b70000 x26: ffff8000a499fd68 >> [ 4.164104] x25: ffff000010860000 x24: ffff000008a8b038 >> [ 4.164108] x23: ffff000008a8b038 x22: ffff000008a8b000 >> [ 4.164111] x21: ffff8000a55b2400 x20: ffff000008a89000 >> [ 4.164115] x19: ffff8000a55b2400 x18: ffffffffffffffff >> [ 4.164118] x17: 0000000000000000 x16: 0000000000000000 >> [ 4.164121] x15: 0000000000040000 x14: 00000000fffffff0 >> [ 4.164125] x13: ffff000010b6c898 x12: 0000000000000030 >> [ 4.164128] x11: 0000000000000000 x10: 0101010101010101 >> [ 4.260542] x9 : fffffffffffffffc x8 : 0000000000000008 >> [ 4.266073] x7 : 0000000000000004 x6 : 1e0e1a00f2ade4ef >> [ 4.271605] x5 : 6f642d72001a0e1e x4 : 8080808000000000 >> [ 4.277136] x3 : 0000000000000000 x2 : ffff000008a8a000 >> [ 4.282667] x1 : 0000000000000000 x0 : ffff8000a55b2400 >> [ 4.288199] Call trace: >> [ 4.290753] st_lsm6dsx_i2c_probe+0x18/0x80 [st_lsm6dsx_i2c] >> [ 4.296648] i2c_device_probe+0x1f0/0x2b8 >> [ 4.300825] really_probe+0x168/0x368 >> [ 4.304638] driver_probe_device.part.2+0x10c/0x128 >> [ 4.309716] device_driver_attach+0x74/0xa0 >> [ 4.314071] __driver_attach+0x84/0x130 >> [ 4.318065] bus_for_each_dev+0x68/0xc8 >> [ 4.322058] driver_attach+0x20/0x28 >> [ 4.325780] bus_add_driver+0xd4/0x1f8 >> [ 4.329683] driver_register+0x60/0x110 >> [ 4.333677] i2c_register_driver+0x44/0x98 >> [ 4.337944] st_lsm6dsx_driver_init+0x1c/0x1000 [st_lsm6dsx_i2c] >> [ 4.344200] do_one_initcall+0x58/0x1a8 >> [ 4.348195] do_init_module+0x54/0x1d4 >> [ 4.352098] load_module+0x1998/0x1c40 >> [ 4.356001] __se_sys_finit_module+0xc0/0xd8 >> [ 4.360446] __arm64_sys_finit_module+0x14/0x20 >> [ 4.365166] el0_svc_common.constprop.0+0xb0/0x168 >> [ 4.370154] el0_svc_handler+0x18/0x20 >> [ 4.374056] el0_svc+0x8/0xc >> [ 4.377059] Code: d2800003 910003fd a90153f3 aa0003f3 (f9400c34) >> [ 4.383406] ---[ end trace 6dfe010c028e3371 ]--- >> > >> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> > Fixes: a106864fd667 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1") > > Thanks Martin. This one is entirely my fault for messing up tweaking > that naming. I should have bounced the patch back for another round > rather than thinking "it's trivial, what could possibly go wrong!" I wouldn't have thought but even your trivial change would probably have deserved to be a separate commit. That would've saved time. but np. worse things have happened. I'm glad to have it fixed. thanks for the quick response. martin > > On basis Greg may prefer to pick this one directly: > > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > Convenient lore.kernel.org link. > > https://lore.kernel.org/linux-iio/20190903051802.22716-1-martin.kepplinger@puri.sm/T/#u > > > If not I'll pick it up for first set of fixes post rc1. > > As for the question below, I've not taken a look yet and certainly seems > an odd result! > > Thanks, > > Jonathan > > > >> --- >> >> While this patch fixes my (formerly already mentioned) issue, it's >> a question actually: Why does is this underscore character a problem? >> >> thanks, >> >> martin >> >> >> >> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h >> index 5e3cd96b0059..80e42c7dbcbe 100644 >> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h >> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h >> @@ -24,7 +24,7 @@ >> #define ST_LSM6DSR_DEV_NAME "lsm6dsr" >> #define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c" >> #define ST_ISM330DHCX_DEV_NAME "ism330dhcx" >> -#define ST_LSM9DS1_DEV_NAME "lsm9ds1_imu" >> +#define ST_LSM9DS1_DEV_NAME "lsm9ds1-imu" >> >> enum st_lsm6dsx_hw_id { >> ST_LSM6DS3_ID, > >
On Tue, 3 Sep 2019 14:51:56 +0200 Martin Kepplinger <martin.kepplinger@puri.sm> wrote: > On 03.09.19 14:43, Jonathan Cameron wrote: > > +CC Greg as fix for a patch in my outstanding pull request. > > > > On Tue, 3 Sep 2019 07:18:02 +0200 > > Martin Kepplinger <martin.kepplinger@puri.sm> wrote: > > > >> With the underscore character in the lsm9ds1_imu device name, we get the > >> following error below, so use a dash, just like the other device names do too. > >> > >> [ 3.961399] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 > >> [ 4.010581] Mem abort info: > >> [ 4.013838] ESR = 0x96000004 > >> [ 4.023602] Exception class = DABT (current EL), IL = 32 bits > >> [ 4.047993] SET = 0, FnV = 0 > >> [ 4.052690] EA = 0, S1PTW = 0 > >> [ 4.056015] Data abort info: > >> [ 4.059020] ISV = 0, ISS = 0x00000004 > >> [ 4.080106] CM = 0, WnR = 0 > >> [ 4.085237] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e4f61000 > >> [ 4.092194] [0000000000000018] pgd=0000000000000000 > >> [ 4.097474] Internal error: Oops: 96000004 [#1] PREEMPT SMP > >> [ 4.103286] Modules linked in: tcpci st_sensors st_lsm6dsx_i2c(+) tcpm st_lsm6dsx industrialio_triggered_buffer kfifo_buf vcnl4000 roles typec goodix snd_soc_sgtl5000 bq25890_charger snvs_pwrkey imx_sdma virt_dma qoriq_thermal imx2_wdt snd_soc_fsl_sai aes_ce_blk imx_pcm_dma crypto_simd watchdog crct10dif_ce ghash_ce sha2_ce snd_soc_simple_card snd_soc_gtm601 snd_soc_simple_card_utils sha1_ce snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore gpio_vibra usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite ip_tables x_tables ipv6 nf_defrag_ipv6 xhci_plat_hcd xhci_hcd usbcore dwc3 ulpi udc_core usb_common phy_fsl_imx8mq_usb > >> [ 4.105389] bq25890-charger 0-006b: Capacity for 3784000 is 86% > >> [ 4.164061] CPU: 1 PID: 344 Comm: systemd-udevd Tainted: G W 5.3.0-rc2-g24e3d989d49f-dirty #161 > >> [ 4.164063] Hardware name: Purism Librem 5 devkit (DT) > >> [ 4.164067] pstate: 80000005 (Nzcv daif -PAN -UAO) > >> [ 4.164082] pc : st_lsm6dsx_i2c_probe+0x18/0x80 [st_lsm6dsx_i2c] > >> [ 4.164093] lr : i2c_device_probe+0x1f0/0x2b8 > >> [ 4.164094] sp : ffff8000a499f970 > >> [ 4.164097] x29: ffff8000a499f970 x28: 0000000000000000 > >> [ 4.164100] x27: ffff000010b70000 x26: ffff8000a499fd68 > >> [ 4.164104] x25: ffff000010860000 x24: ffff000008a8b038 > >> [ 4.164108] x23: ffff000008a8b038 x22: ffff000008a8b000 > >> [ 4.164111] x21: ffff8000a55b2400 x20: ffff000008a89000 > >> [ 4.164115] x19: ffff8000a55b2400 x18: ffffffffffffffff > >> [ 4.164118] x17: 0000000000000000 x16: 0000000000000000 > >> [ 4.164121] x15: 0000000000040000 x14: 00000000fffffff0 > >> [ 4.164125] x13: ffff000010b6c898 x12: 0000000000000030 > >> [ 4.164128] x11: 0000000000000000 x10: 0101010101010101 > >> [ 4.260542] x9 : fffffffffffffffc x8 : 0000000000000008 > >> [ 4.266073] x7 : 0000000000000004 x6 : 1e0e1a00f2ade4ef > >> [ 4.271605] x5 : 6f642d72001a0e1e x4 : 8080808000000000 > >> [ 4.277136] x3 : 0000000000000000 x2 : ffff000008a8a000 > >> [ 4.282667] x1 : 0000000000000000 x0 : ffff8000a55b2400 > >> [ 4.288199] Call trace: > >> [ 4.290753] st_lsm6dsx_i2c_probe+0x18/0x80 [st_lsm6dsx_i2c] > >> [ 4.296648] i2c_device_probe+0x1f0/0x2b8 > >> [ 4.300825] really_probe+0x168/0x368 > >> [ 4.304638] driver_probe_device.part.2+0x10c/0x128 > >> [ 4.309716] device_driver_attach+0x74/0xa0 > >> [ 4.314071] __driver_attach+0x84/0x130 > >> [ 4.318065] bus_for_each_dev+0x68/0xc8 > >> [ 4.322058] driver_attach+0x20/0x28 > >> [ 4.325780] bus_add_driver+0xd4/0x1f8 > >> [ 4.329683] driver_register+0x60/0x110 > >> [ 4.333677] i2c_register_driver+0x44/0x98 > >> [ 4.337944] st_lsm6dsx_driver_init+0x1c/0x1000 [st_lsm6dsx_i2c] > >> [ 4.344200] do_one_initcall+0x58/0x1a8 > >> [ 4.348195] do_init_module+0x54/0x1d4 > >> [ 4.352098] load_module+0x1998/0x1c40 > >> [ 4.356001] __se_sys_finit_module+0xc0/0xd8 > >> [ 4.360446] __arm64_sys_finit_module+0x14/0x20 > >> [ 4.365166] el0_svc_common.constprop.0+0xb0/0x168 > >> [ 4.370154] el0_svc_handler+0x18/0x20 > >> [ 4.374056] el0_svc+0x8/0xc > >> [ 4.377059] Code: d2800003 910003fd a90153f3 aa0003f3 (f9400c34) > >> [ 4.383406] ---[ end trace 6dfe010c028e3371 ]--- > >> > > > >> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> > > Fixes: a106864fd667 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1") > > > > Thanks Martin. This one is entirely my fault for messing up tweaking > > that naming. I should have bounced the patch back for another round > > rather than thinking "it's trivial, what could possibly go wrong!" > > I wouldn't have thought but even your trivial change would probably have > deserved to be a separate commit. That would've saved time. True on this occaison, but the converse is that it is common for minor tweaks from last minute reviews to be rolled on applying in the interests of keeping the history clean. Just to top that, given I needed to rebase that tree anyway to fix a missing sign off I've rolled your patch in a fixup for the original patch. So as far as the final history is concerned the issue never happened. Fingers crossed I haven't messed anything else up! Thanks, Jonathan > > but np. worse things have happened. I'm glad to have it fixed. thanks > for the quick response. > > martin > > > > > On basis Greg may prefer to pick this one directly: > > > > Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > > Convenient lore.kernel.org link. > > > > https://lore.kernel.org/linux-iio/20190903051802.22716-1-martin.kepplinger@puri.sm/T/#u > > > > > > If not I'll pick it up for first set of fixes post rc1. > > > > As for the question below, I've not taken a look yet and certainly seems > > an odd result! > > > > Thanks, > > > > Jonathan > > > > > > > >> --- > >> > >> While this patch fixes my (formerly already mentioned) issue, it's > >> a question actually: Why does is this underscore character a problem? > >> > >> thanks, > >> > >> martin > >> > >> > >> > >> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > >> index 5e3cd96b0059..80e42c7dbcbe 100644 > >> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > >> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > >> @@ -24,7 +24,7 @@ > >> #define ST_LSM6DSR_DEV_NAME "lsm6dsr" > >> #define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c" > >> #define ST_ISM330DHCX_DEV_NAME "ism330dhcx" > >> -#define ST_LSM9DS1_DEV_NAME "lsm9ds1_imu" > >> +#define ST_LSM9DS1_DEV_NAME "lsm9ds1-imu" > >> > >> enum st_lsm6dsx_hw_id { > >> ST_LSM6DS3_ID, > > > > >
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 5e3cd96b0059..80e42c7dbcbe 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -24,7 +24,7 @@ #define ST_LSM6DSR_DEV_NAME "lsm6dsr" #define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c" #define ST_ISM330DHCX_DEV_NAME "ism330dhcx" -#define ST_LSM9DS1_DEV_NAME "lsm9ds1_imu" +#define ST_LSM9DS1_DEV_NAME "lsm9ds1-imu" enum st_lsm6dsx_hw_id { ST_LSM6DS3_ID,
With the underscore character in the lsm9ds1_imu device name, we get the following error below, so use a dash, just like the other device names do too. [ 3.961399] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 4.010581] Mem abort info: [ 4.013838] ESR = 0x96000004 [ 4.023602] Exception class = DABT (current EL), IL = 32 bits [ 4.047993] SET = 0, FnV = 0 [ 4.052690] EA = 0, S1PTW = 0 [ 4.056015] Data abort info: [ 4.059020] ISV = 0, ISS = 0x00000004 [ 4.080106] CM = 0, WnR = 0 [ 4.085237] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e4f61000 [ 4.092194] [0000000000000018] pgd=0000000000000000 [ 4.097474] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4.103286] Modules linked in: tcpci st_sensors st_lsm6dsx_i2c(+) tcpm st_lsm6dsx industrialio_triggered_buffer kfifo_buf vcnl4000 roles typec goodix snd_soc_sgtl5000 bq25890_charger snvs_pwrkey imx_sdma virt_dma qoriq_thermal imx2_wdt snd_soc_fsl_sai aes_ce_blk imx_pcm_dma crypto_simd watchdog crct10dif_ce ghash_ce sha2_ce snd_soc_simple_card snd_soc_gtm601 snd_soc_simple_card_utils sha1_ce snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore gpio_vibra usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite ip_tables x_tables ipv6 nf_defrag_ipv6 xhci_plat_hcd xhci_hcd usbcore dwc3 ulpi udc_core usb_common phy_fsl_imx8mq_usb [ 4.105389] bq25890-charger 0-006b: Capacity for 3784000 is 86% [ 4.164061] CPU: 1 PID: 344 Comm: systemd-udevd Tainted: G W 5.3.0-rc2-g24e3d989d49f-dirty #161 [ 4.164063] Hardware name: Purism Librem 5 devkit (DT) [ 4.164067] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 4.164082] pc : st_lsm6dsx_i2c_probe+0x18/0x80 [st_lsm6dsx_i2c] [ 4.164093] lr : i2c_device_probe+0x1f0/0x2b8 [ 4.164094] sp : ffff8000a499f970 [ 4.164097] x29: ffff8000a499f970 x28: 0000000000000000 [ 4.164100] x27: ffff000010b70000 x26: ffff8000a499fd68 [ 4.164104] x25: ffff000010860000 x24: ffff000008a8b038 [ 4.164108] x23: ffff000008a8b038 x22: ffff000008a8b000 [ 4.164111] x21: ffff8000a55b2400 x20: ffff000008a89000 [ 4.164115] x19: ffff8000a55b2400 x18: ffffffffffffffff [ 4.164118] x17: 0000000000000000 x16: 0000000000000000 [ 4.164121] x15: 0000000000040000 x14: 00000000fffffff0 [ 4.164125] x13: ffff000010b6c898 x12: 0000000000000030 [ 4.164128] x11: 0000000000000000 x10: 0101010101010101 [ 4.260542] x9 : fffffffffffffffc x8 : 0000000000000008 [ 4.266073] x7 : 0000000000000004 x6 : 1e0e1a00f2ade4ef [ 4.271605] x5 : 6f642d72001a0e1e x4 : 8080808000000000 [ 4.277136] x3 : 0000000000000000 x2 : ffff000008a8a000 [ 4.282667] x1 : 0000000000000000 x0 : ffff8000a55b2400 [ 4.288199] Call trace: [ 4.290753] st_lsm6dsx_i2c_probe+0x18/0x80 [st_lsm6dsx_i2c] [ 4.296648] i2c_device_probe+0x1f0/0x2b8 [ 4.300825] really_probe+0x168/0x368 [ 4.304638] driver_probe_device.part.2+0x10c/0x128 [ 4.309716] device_driver_attach+0x74/0xa0 [ 4.314071] __driver_attach+0x84/0x130 [ 4.318065] bus_for_each_dev+0x68/0xc8 [ 4.322058] driver_attach+0x20/0x28 [ 4.325780] bus_add_driver+0xd4/0x1f8 [ 4.329683] driver_register+0x60/0x110 [ 4.333677] i2c_register_driver+0x44/0x98 [ 4.337944] st_lsm6dsx_driver_init+0x1c/0x1000 [st_lsm6dsx_i2c] [ 4.344200] do_one_initcall+0x58/0x1a8 [ 4.348195] do_init_module+0x54/0x1d4 [ 4.352098] load_module+0x1998/0x1c40 [ 4.356001] __se_sys_finit_module+0xc0/0xd8 [ 4.360446] __arm64_sys_finit_module+0x14/0x20 [ 4.365166] el0_svc_common.constprop.0+0xb0/0x168 [ 4.370154] el0_svc_handler+0x18/0x20 [ 4.374056] el0_svc+0x8/0xc [ 4.377059] Code: d2800003 910003fd a90153f3 aa0003f3 (f9400c34) [ 4.383406] ---[ end trace 6dfe010c028e3371 ]--- Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> --- While this patch fixes my (formerly already mentioned) issue, it's a question actually: Why does is this underscore character a problem? thanks, martin drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)