From patchwork Wed Oct 2 12:30:22 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Miquel Raynal X-Patchwork-Id: 11171013 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 872901599 for ; Wed, 2 Oct 2019 12:30:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 706E421A4C for ; Wed, 2 Oct 2019 12:30:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727127AbfJBMag (ORCPT ); Wed, 2 Oct 2019 08:30:36 -0400 Received: from relay4-d.mail.gandi.net ([217.70.183.196]:52187 "EHLO relay4-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726830AbfJBMaf (ORCPT ); Wed, 2 Oct 2019 08:30:35 -0400 X-Originating-IP: 86.250.200.211 Received: from localhost.localdomain (lfbn-1-17395-211.w86-250.abo.wanadoo.fr [86.250.200.211]) (Authenticated sender: miquel.raynal@bootlin.com) by relay4-d.mail.gandi.net (Postfix) with ESMTPSA id 5F166E0008; Wed, 2 Oct 2019 12:30:32 +0000 (UTC) From: Miquel Raynal To: Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , Rob Herring , Mark Rutland Cc: , linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, Thomas Petazzoni , Miquel Raynal Subject: [PATCH 4/7] iio: adc: max1027: Prepare the introduction of different resolutions Date: Wed, 2 Oct 2019 14:30:22 +0200 Message-Id: <20191002123025.21413-5-miquel.raynal@bootlin.com> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20191002123025.21413-1-miquel.raynal@bootlin.com> References: <20191002123025.21413-1-miquel.raynal@bootlin.com> MIME-Version: 1.0 Sender: linux-iio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org Maxim's max1027/29/31 series returns the measured voltages with a resolution of 10 bits. There is a very similar series, max1227/29/31 which works very similarly but uses a resolution of 12 bits. Prepare the support for these chips by turning the 'depth' into a macro parameter instead of hardcoding it everywhere. Also reorganize just a bit the macros at the top to avoid repeating tens of lines when adding support for a new chip. Signed-off-by: Miquel Raynal --- drivers/iio/adc/max1027.c | 81 +++++++++++++++++++-------------------- 1 file changed, 39 insertions(+), 42 deletions(-) diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c index f9b473ee6711..fc75764a6fd7 100644 --- a/drivers/iio/adc/max1027.c +++ b/drivers/iio/adc/max1027.c @@ -78,12 +78,15 @@ static const struct of_device_id max1027_adc_dt_ids[] = { { .compatible = "maxim,max1027" }, { .compatible = "maxim,max1029" }, { .compatible = "maxim,max1031" }, + { .compatible = "maxim,max1227" }, + { .compatible = "maxim,max1229" }, + { .compatible = "maxim,max1231" }, {}, }; MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); #endif -#define MAX1027_V_CHAN(index) \ +#define MAX1027_V_CHAN(index, depth) \ { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ @@ -93,7 +96,7 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); .scan_index = index + 1, \ .scan_type = { \ .sign = 'u', \ - .realbits = 10, \ + .realbits = depth, \ .storagebits = 16, \ .shift = 2, \ .endianness = IIO_BE, \ @@ -115,52 +118,42 @@ MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); }, \ } +#define MAX1X27_CHANNELS(depth) \ + MAX1027_T_CHAN, \ + MAX1027_V_CHAN(0, depth), \ + MAX1027_V_CHAN(1, depth), \ + MAX1027_V_CHAN(2, depth), \ + MAX1027_V_CHAN(3, depth), \ + MAX1027_V_CHAN(4, depth), \ + MAX1027_V_CHAN(5, depth), \ + MAX1027_V_CHAN(6, depth), \ + MAX1027_V_CHAN(7, depth) + +#define MAX1X29_CHANNELS(depth) \ + MAX1027_V_CHAN(8, depth), \ + MAX1027_V_CHAN(9, depth), \ + MAX1027_V_CHAN(10, depth), \ + MAX1027_V_CHAN(11, depth) + +#define MAX1X31_CHANNELS(depth) \ + MAX1027_V_CHAN(12, depth), \ + MAX1027_V_CHAN(13, depth), \ + MAX1027_V_CHAN(14, depth), \ + MAX1027_V_CHAN(15, depth) + static const struct iio_chan_spec max1027_channels[] = { - MAX1027_T_CHAN, - MAX1027_V_CHAN(0), - MAX1027_V_CHAN(1), - MAX1027_V_CHAN(2), - MAX1027_V_CHAN(3), - MAX1027_V_CHAN(4), - MAX1027_V_CHAN(5), - MAX1027_V_CHAN(6), - MAX1027_V_CHAN(7) + MAX1X27_CHANNELS(10) }; static const struct iio_chan_spec max1029_channels[] = { - MAX1027_T_CHAN, - MAX1027_V_CHAN(0), - MAX1027_V_CHAN(1), - MAX1027_V_CHAN(2), - MAX1027_V_CHAN(3), - MAX1027_V_CHAN(4), - MAX1027_V_CHAN(5), - MAX1027_V_CHAN(6), - MAX1027_V_CHAN(7), - MAX1027_V_CHAN(8), - MAX1027_V_CHAN(9), - MAX1027_V_CHAN(10), - MAX1027_V_CHAN(11) + MAX1X27_CHANNELS(10), + MAX1X29_CHANNELS(10) }; static const struct iio_chan_spec max1031_channels[] = { - MAX1027_T_CHAN, - MAX1027_V_CHAN(0), - MAX1027_V_CHAN(1), - MAX1027_V_CHAN(2), - MAX1027_V_CHAN(3), - MAX1027_V_CHAN(4), - MAX1027_V_CHAN(5), - MAX1027_V_CHAN(6), - MAX1027_V_CHAN(7), - MAX1027_V_CHAN(8), - MAX1027_V_CHAN(9), - MAX1027_V_CHAN(10), - MAX1027_V_CHAN(11), - MAX1027_V_CHAN(12), - MAX1027_V_CHAN(13), - MAX1027_V_CHAN(14), - MAX1027_V_CHAN(15) + MAX1X27_CHANNELS(10), + MAX1X29_CHANNELS(10), + MAX1X31_CHANNELS(10) }; static const unsigned long max1027_available_scan_masks[] = { @@ -181,6 +174,7 @@ static const unsigned long max1031_available_scan_masks[] = { struct max1027_chip_info { const struct iio_chan_spec *channels; unsigned int num_channels; + unsigned int depth; const unsigned long *available_scan_masks; }; @@ -188,16 +182,19 @@ static const struct max1027_chip_info max1027_chip_info_tbl[] = { [max1027] = { .channels = max1027_channels, .num_channels = ARRAY_SIZE(max1027_channels), + .depth = 10, .available_scan_masks = max1027_available_scan_masks, }, [max1029] = { .channels = max1029_channels, .num_channels = ARRAY_SIZE(max1029_channels), + .depth = 10, .available_scan_masks = max1029_available_scan_masks, }, [max1031] = { .channels = max1031_channels, .num_channels = ARRAY_SIZE(max1031_channels), + .depth = 10, .available_scan_masks = max1031_available_scan_masks, }, }; @@ -284,7 +281,7 @@ static int max1027_read_raw(struct iio_dev *indio_dev, break; case IIO_VOLTAGE: *val = 2500; - *val2 = 10; + *val2 = st->info->depth; ret = IIO_VAL_FRACTIONAL_LOG2; break; default: