| Message ID | 20191002160744.11307-1-krzk@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] dt-bindings: samsung: Indent examples with four spaces | expand |
On Wed, 2 Oct 2019 18:07:41 +0200 Krzysztof Kozlowski <krzk@kernel.org> wrote: > Change the indentation of examples used in json-schema bindings from two > to four spaces as this makes the code easier to read and seems to be > preferred in other files. > I'm assuming Rob will pick these up given they span multiple subsystems. > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio > --- > .../bindings/arm/samsung/exynos-chipid.yaml | 4 +- > .../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++---------- > .../bindings/power/reset/syscon-poweroff.yaml | 8 +-- > .../bindings/power/reset/syscon-reboot.yaml | 8 +-- > .../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++-- > 5 files changed, 48 insertions(+), 48 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml > index 9c573ad7dc7d..ce40adabb4e8 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml > +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml > @@ -20,6 +20,6 @@ properties: > examples: > - | > chipid@10000000 { > - compatible = "samsung,exynos4210-chipid"; > - reg = <0x10000000 0x100>; > + compatible = "samsung,exynos4210-chipid"; > + reg = <0x10000000 0x100>; > }; > diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > index b4c6c26681d9..a0a9b909ac40 100644 > --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > @@ -112,40 +112,40 @@ allOf: > examples: > - | > adc: adc@12d10000 { > - compatible = "samsung,exynos-adc-v1"; > - reg = <0x12d10000 0x100>; > - interrupts = <0 106 0>; > - #io-channel-cells = <1>; > - io-channel-ranges; > - > - clocks = <&clock 303>; > - clock-names = "adc"; > - > - vdd-supply = <&buck5_reg>; > - samsung,syscon-phandle = <&pmu_system_controller>; > - > - /* NTC thermistor is a hwmon device */ > - ncp15wb473@0 { > - compatible = "murata,ncp15wb473"; > - pullup-uv = <1800000>; > - pullup-ohm = <47000>; > - pulldown-ohm = <0>; > - io-channels = <&adc 4>; > - }; > + compatible = "samsung,exynos-adc-v1"; > + reg = <0x12d10000 0x100>; > + interrupts = <0 106 0>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + > + clocks = <&clock 303>; > + clock-names = "adc"; > + > + vdd-supply = <&buck5_reg>; > + samsung,syscon-phandle = <&pmu_system_controller>; > + > + /* NTC thermistor is a hwmon device */ > + ncp15wb473@0 { > + compatible = "murata,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 4>; > + }; > }; > > - | > adc@126c0000 { > - compatible = "samsung,exynos3250-adc"; > - reg = <0x126C0000 0x100>; > - interrupts = <0 137 0>; > - #io-channel-cells = <1>; > - io-channel-ranges; > - > - clocks = <&cmu 0>, // CLK_TSADC > - <&cmu 1>; // CLK_SCLK_TSADC > - clock-names = "adc", "sclk"; > - > - vdd-supply = <&buck5_reg>; > - samsung,syscon-phandle = <&pmu_system_controller>; > + compatible = "samsung,exynos3250-adc"; > + reg = <0x126C0000 0x100>; > + interrupts = <0 137 0>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + > + clocks = <&cmu 0>, // CLK_TSADC > + <&cmu 1>; // CLK_SCLK_TSADC > + clock-names = "adc", "sclk"; > + > + vdd-supply = <&buck5_reg>; > + samsung,syscon-phandle = <&pmu_system_controller>; > }; > diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml > index fb812937b534..520e07e6f21b 100644 > --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml > +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml > @@ -53,8 +53,8 @@ allOf: > examples: > - | > poweroff { > - compatible = "syscon-poweroff"; > - regmap = <®mapnode>; > - offset = <0x0>; > - mask = <0x7a>; > + compatible = "syscon-poweroff"; > + regmap = <®mapnode>; > + offset = <0x0>; > + mask = <0x7a>; > }; > diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > index a7920f5eef79..d38006b1f1f4 100644 > --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > @@ -53,8 +53,8 @@ allOf: > examples: > - | > reboot { > - compatible = "syscon-reboot"; > - regmap = <®mapnode>; > - offset = <0x0>; > - mask = <0x1>; > + compatible = "syscon-reboot"; > + regmap = <®mapnode>; > + offset = <0x0>; > + mask = <0x1>; > }; > diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml > index 951a6a485709..95570d7e19eb 100644 > --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml > +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml > @@ -76,10 +76,10 @@ allOf: > examples: > - | > rtc@10070000 { > - compatible = "samsung,s3c6410-rtc"; > - reg = <0x10070000 0x100>; > - interrupts = <0 44 4>, <0 45 4>; > - clocks = <&clock 0>, // CLK_RTC > - <&s2mps11_osc 0>; // S2MPS11_CLK_AP > - clock-names = "rtc", "rtc_src"; > + compatible = "samsung,s3c6410-rtc"; > + reg = <0x10070000 0x100>; > + interrupts = <0 44 4>, <0 45 4>; > + clocks = <&clock 0>, // CLK_RTC > + <&s2mps11_osc 0>; // S2MPS11_CLK_AP > + clock-names = "rtc", "rtc_src"; > };
On 02/10/2019 18:07:41+0200, Krzysztof Kozlowski wrote: > Change the indentation of examples used in json-schema bindings from two > to four spaces as this makes the code easier to read and seems to be > preferred in other files. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > --- > .../bindings/arm/samsung/exynos-chipid.yaml | 4 +- > .../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++---------- > .../bindings/power/reset/syscon-poweroff.yaml | 8 +-- > .../bindings/power/reset/syscon-reboot.yaml | 8 +-- > .../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++-- > 5 files changed, 48 insertions(+), 48 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml > index 9c573ad7dc7d..ce40adabb4e8 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml > +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml > @@ -20,6 +20,6 @@ properties: > examples: > - | > chipid@10000000 { > - compatible = "samsung,exynos4210-chipid"; > - reg = <0x10000000 0x100>; > + compatible = "samsung,exynos4210-chipid"; > + reg = <0x10000000 0x100>; > }; > diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > index b4c6c26681d9..a0a9b909ac40 100644 > --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > @@ -112,40 +112,40 @@ allOf: > examples: > - | > adc: adc@12d10000 { > - compatible = "samsung,exynos-adc-v1"; > - reg = <0x12d10000 0x100>; > - interrupts = <0 106 0>; > - #io-channel-cells = <1>; > - io-channel-ranges; > - > - clocks = <&clock 303>; > - clock-names = "adc"; > - > - vdd-supply = <&buck5_reg>; > - samsung,syscon-phandle = <&pmu_system_controller>; > - > - /* NTC thermistor is a hwmon device */ > - ncp15wb473@0 { > - compatible = "murata,ncp15wb473"; > - pullup-uv = <1800000>; > - pullup-ohm = <47000>; > - pulldown-ohm = <0>; > - io-channels = <&adc 4>; > - }; > + compatible = "samsung,exynos-adc-v1"; > + reg = <0x12d10000 0x100>; > + interrupts = <0 106 0>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + > + clocks = <&clock 303>; > + clock-names = "adc"; > + > + vdd-supply = <&buck5_reg>; > + samsung,syscon-phandle = <&pmu_system_controller>; > + > + /* NTC thermistor is a hwmon device */ > + ncp15wb473@0 { > + compatible = "murata,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 4>; > + }; > }; > > - | > adc@126c0000 { > - compatible = "samsung,exynos3250-adc"; > - reg = <0x126C0000 0x100>; > - interrupts = <0 137 0>; > - #io-channel-cells = <1>; > - io-channel-ranges; > - > - clocks = <&cmu 0>, // CLK_TSADC > - <&cmu 1>; // CLK_SCLK_TSADC > - clock-names = "adc", "sclk"; > - > - vdd-supply = <&buck5_reg>; > - samsung,syscon-phandle = <&pmu_system_controller>; > + compatible = "samsung,exynos3250-adc"; > + reg = <0x126C0000 0x100>; > + interrupts = <0 137 0>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + > + clocks = <&cmu 0>, // CLK_TSADC > + <&cmu 1>; // CLK_SCLK_TSADC > + clock-names = "adc", "sclk"; > + > + vdd-supply = <&buck5_reg>; > + samsung,syscon-phandle = <&pmu_system_controller>; > }; > diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml > index fb812937b534..520e07e6f21b 100644 > --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml > +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml > @@ -53,8 +53,8 @@ allOf: > examples: > - | > poweroff { > - compatible = "syscon-poweroff"; > - regmap = <®mapnode>; > - offset = <0x0>; > - mask = <0x7a>; > + compatible = "syscon-poweroff"; > + regmap = <®mapnode>; > + offset = <0x0>; > + mask = <0x7a>; > }; > diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > index a7920f5eef79..d38006b1f1f4 100644 > --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > @@ -53,8 +53,8 @@ allOf: > examples: > - | > reboot { > - compatible = "syscon-reboot"; > - regmap = <®mapnode>; > - offset = <0x0>; > - mask = <0x1>; > + compatible = "syscon-reboot"; > + regmap = <®mapnode>; > + offset = <0x0>; > + mask = <0x1>; > }; > diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml > index 951a6a485709..95570d7e19eb 100644 > --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml > +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml > @@ -76,10 +76,10 @@ allOf: > examples: > - | > rtc@10070000 { > - compatible = "samsung,s3c6410-rtc"; > - reg = <0x10070000 0x100>; > - interrupts = <0 44 4>, <0 45 4>; > - clocks = <&clock 0>, // CLK_RTC > - <&s2mps11_osc 0>; // S2MPS11_CLK_AP > - clock-names = "rtc", "rtc_src"; > + compatible = "samsung,s3c6410-rtc"; > + reg = <0x10070000 0x100>; > + interrupts = <0 44 4>, <0 45 4>; > + clocks = <&clock 0>, // CLK_RTC > + <&s2mps11_osc 0>; // S2MPS11_CLK_AP > + clock-names = "rtc", "rtc_src"; > }; > -- > 2.17.1 >
Hi, On Wed, Oct 02, 2019 at 06:07:41PM +0200, Krzysztof Kozlowski wrote: > Change the indentation of examples used in json-schema bindings from two > to four spaces as this makes the code easier to read and seems to be > preferred in other files. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sebastian Reichel <sre@kernel.org> # for power/reset -- Sebastian > --- > .../bindings/arm/samsung/exynos-chipid.yaml | 4 +- > .../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++---------- > .../bindings/power/reset/syscon-poweroff.yaml | 8 +-- > .../bindings/power/reset/syscon-reboot.yaml | 8 +-- > .../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++-- > 5 files changed, 48 insertions(+), 48 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml > index 9c573ad7dc7d..ce40adabb4e8 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml > +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml > @@ -20,6 +20,6 @@ properties: > examples: > - | > chipid@10000000 { > - compatible = "samsung,exynos4210-chipid"; > - reg = <0x10000000 0x100>; > + compatible = "samsung,exynos4210-chipid"; > + reg = <0x10000000 0x100>; > }; > diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > index b4c6c26681d9..a0a9b909ac40 100644 > --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > @@ -112,40 +112,40 @@ allOf: > examples: > - | > adc: adc@12d10000 { > - compatible = "samsung,exynos-adc-v1"; > - reg = <0x12d10000 0x100>; > - interrupts = <0 106 0>; > - #io-channel-cells = <1>; > - io-channel-ranges; > - > - clocks = <&clock 303>; > - clock-names = "adc"; > - > - vdd-supply = <&buck5_reg>; > - samsung,syscon-phandle = <&pmu_system_controller>; > - > - /* NTC thermistor is a hwmon device */ > - ncp15wb473@0 { > - compatible = "murata,ncp15wb473"; > - pullup-uv = <1800000>; > - pullup-ohm = <47000>; > - pulldown-ohm = <0>; > - io-channels = <&adc 4>; > - }; > + compatible = "samsung,exynos-adc-v1"; > + reg = <0x12d10000 0x100>; > + interrupts = <0 106 0>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + > + clocks = <&clock 303>; > + clock-names = "adc"; > + > + vdd-supply = <&buck5_reg>; > + samsung,syscon-phandle = <&pmu_system_controller>; > + > + /* NTC thermistor is a hwmon device */ > + ncp15wb473@0 { > + compatible = "murata,ncp15wb473"; > + pullup-uv = <1800000>; > + pullup-ohm = <47000>; > + pulldown-ohm = <0>; > + io-channels = <&adc 4>; > + }; > }; > > - | > adc@126c0000 { > - compatible = "samsung,exynos3250-adc"; > - reg = <0x126C0000 0x100>; > - interrupts = <0 137 0>; > - #io-channel-cells = <1>; > - io-channel-ranges; > - > - clocks = <&cmu 0>, // CLK_TSADC > - <&cmu 1>; // CLK_SCLK_TSADC > - clock-names = "adc", "sclk"; > - > - vdd-supply = <&buck5_reg>; > - samsung,syscon-phandle = <&pmu_system_controller>; > + compatible = "samsung,exynos3250-adc"; > + reg = <0x126C0000 0x100>; > + interrupts = <0 137 0>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + > + clocks = <&cmu 0>, // CLK_TSADC > + <&cmu 1>; // CLK_SCLK_TSADC > + clock-names = "adc", "sclk"; > + > + vdd-supply = <&buck5_reg>; > + samsung,syscon-phandle = <&pmu_system_controller>; > }; > diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml > index fb812937b534..520e07e6f21b 100644 > --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml > +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml > @@ -53,8 +53,8 @@ allOf: > examples: > - | > poweroff { > - compatible = "syscon-poweroff"; > - regmap = <®mapnode>; > - offset = <0x0>; > - mask = <0x7a>; > + compatible = "syscon-poweroff"; > + regmap = <®mapnode>; > + offset = <0x0>; > + mask = <0x7a>; > }; > diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > index a7920f5eef79..d38006b1f1f4 100644 > --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml > @@ -53,8 +53,8 @@ allOf: > examples: > - | > reboot { > - compatible = "syscon-reboot"; > - regmap = <®mapnode>; > - offset = <0x0>; > - mask = <0x1>; > + compatible = "syscon-reboot"; > + regmap = <®mapnode>; > + offset = <0x0>; > + mask = <0x1>; > }; > diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml > index 951a6a485709..95570d7e19eb 100644 > --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml > +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml > @@ -76,10 +76,10 @@ allOf: > examples: > - | > rtc@10070000 { > - compatible = "samsung,s3c6410-rtc"; > - reg = <0x10070000 0x100>; > - interrupts = <0 44 4>, <0 45 4>; > - clocks = <&clock 0>, // CLK_RTC > - <&s2mps11_osc 0>; // S2MPS11_CLK_AP > - clock-names = "rtc", "rtc_src"; > + compatible = "samsung,s3c6410-rtc"; > + reg = <0x10070000 0x100>; > + interrupts = <0 44 4>, <0 45 4>; > + clocks = <&clock 0>, // CLK_RTC > + <&s2mps11_osc 0>; // S2MPS11_CLK_AP > + clock-names = "rtc", "rtc_src"; > }; > -- > 2.17.1 >
On Wed, 2 Oct 2019 18:07:41 +0200, Krzysztof Kozlowski wrote: > Change the indentation of examples used in json-schema bindings from two > to four spaces as this makes the code easier to read and seems to be > preferred in other files. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > .../bindings/arm/samsung/exynos-chipid.yaml | 4 +- > .../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++---------- > .../bindings/power/reset/syscon-poweroff.yaml | 8 +-- > .../bindings/power/reset/syscon-reboot.yaml | 8 +-- > .../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++-- > 5 files changed, 48 insertions(+), 48 deletions(-) > Applied, thanks. Rob
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml index 9c573ad7dc7d..ce40adabb4e8 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml @@ -20,6 +20,6 @@ properties: examples: - | chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; }; diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index b4c6c26681d9..a0a9b909ac40 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -112,40 +112,40 @@ allOf: examples: - | adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x12d10000 0x100>; - interrupts = <0 106 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&clock 303>; - clock-names = "adc"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; - - /* NTC thermistor is a hwmon device */ - ncp15wb473@0 { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <47000>; - pulldown-ohm = <0>; - io-channels = <&adc 4>; - }; + compatible = "samsung,exynos-adc-v1"; + reg = <0x12d10000 0x100>; + interrupts = <0 106 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&clock 303>; + clock-names = "adc"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; + + /* NTC thermistor is a hwmon device */ + ncp15wb473@0 { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; }; - | adc@126c0000 { - compatible = "samsung,exynos3250-adc"; - reg = <0x126C0000 0x100>; - interrupts = <0 137 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&cmu 0>, // CLK_TSADC - <&cmu 1>; // CLK_SCLK_TSADC - clock-names = "adc", "sclk"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; + compatible = "samsung,exynos3250-adc"; + reg = <0x126C0000 0x100>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu 0>, // CLK_TSADC + <&cmu 1>; // CLK_SCLK_TSADC + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; + samsung,syscon-phandle = <&pmu_system_controller>; }; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml index fb812937b534..520e07e6f21b 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml @@ -53,8 +53,8 @@ allOf: examples: - | poweroff { - compatible = "syscon-poweroff"; - regmap = <®mapnode>; - offset = <0x0>; - mask = <0x7a>; + compatible = "syscon-poweroff"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x7a>; }; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml index a7920f5eef79..d38006b1f1f4 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml @@ -53,8 +53,8 @@ allOf: examples: - | reboot { - compatible = "syscon-reboot"; - regmap = <®mapnode>; - offset = <0x0>; - mask = <0x1>; + compatible = "syscon-reboot"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x1>; }; diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml index 951a6a485709..95570d7e19eb 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml @@ -76,10 +76,10 @@ allOf: examples: - | rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x10070000 0x100>; - interrupts = <0 44 4>, <0 45 4>; - clocks = <&clock 0>, // CLK_RTC - <&s2mps11_osc 0>; // S2MPS11_CLK_AP - clock-names = "rtc", "rtc_src"; + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 4>, <0 45 4>; + clocks = <&clock 0>, // CLK_RTC + <&s2mps11_osc 0>; // S2MPS11_CLK_AP + clock-names = "rtc", "rtc_src"; };
Change the indentation of examples used in json-schema bindings from two to four spaces as this makes the code easier to read and seems to be preferred in other files. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../bindings/arm/samsung/exynos-chipid.yaml | 4 +- .../bindings/iio/adc/samsung,exynos-adc.yaml | 64 +++++++++---------- .../bindings/power/reset/syscon-poweroff.yaml | 8 +-- .../bindings/power/reset/syscon-reboot.yaml | 8 +-- .../devicetree/bindings/rtc/s3c-rtc.yaml | 12 ++-- 5 files changed, 48 insertions(+), 48 deletions(-)