diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ae24d3ea68ea..420900852166 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1210,13 +1210,6 @@ config AB8500_DEBUG
 	  Select this option if you want debug information using the debug
 	  filesystem, debugfs.
 
-config AB8500_GPADC
-	bool "ST-Ericsson AB8500 GPADC driver"
-	depends on AB8500_CORE && REGULATOR_AB8500
-	default y
-	help
-	  AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
-
 config MFD_DB8500_PRCMU
 	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 	depends on UX500_SOC_DB8500
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c1067ea46204..aed99f08739f 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -177,7 +177,6 @@ obj-$(CONFIG_ABX500_CORE)	+= abx500-core.o
 obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
 obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
-obj-$(CONFIG_AB8500_GPADC)	+= ab8500-gpadc.o
 obj-$(CONFIG_MFD_DB8500_PRCMU)	+= db8500-prcmu.o
 # ab8500-core need to come after db8500-prcmu (which provides the channel)
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index f4e26b6e5362..1a9a3414d4fa 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -84,7 +84,6 @@
 
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
 
 #ifdef CONFIG_DEBUG_FS
 #include <linux/string.h>
@@ -103,11 +102,6 @@ static int num_irqs;
 static struct device_attribute **dev_attr;
 static char **event_name;
 
-static u8 avg_sample = SAMPLE_16;
-static u8 trig_edge = RISING_EDGE;
-static u8 conv_type = ADC_SW;
-static u8 trig_timer;
-
 /**
  * struct ab8500_reg_range
  * @first: the first address of the range
@@ -152,7 +146,6 @@ static struct hwreg_cfg hwreg_cfg = {
 };
 
 #define AB8500_NAME_STRING "ab8500"
-#define AB8500_ADC_NAME_STRING "gpadc"
 #define AB8500_NUM_BANKS AB8500_DEBUG_FIELD_LAST
 
 #define AB8500_REV_REG 0x80
@@ -1646,633 +1639,6 @@ static int ab8500_modem_show(struct seq_file *s, void *p)
 
 DEFINE_SHOW_ATTRIBUTE(ab8500_modem);
 
-static int ab8500_gpadc_bat_ctrl_show(struct seq_file *s, void *p)
-{
-	int bat_ctrl_raw;
-	int bat_ctrl_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		BAT_CTRL, bat_ctrl_raw);
-
-	seq_printf(s, "%d,0x%X\n", bat_ctrl_convert, bat_ctrl_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_bat_ctrl);
-
-static int ab8500_gpadc_btemp_ball_show(struct seq_file *s, void *p)
-{
-	int btemp_ball_raw;
-	int btemp_ball_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
-		btemp_ball_raw);
-
-	seq_printf(s, "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_btemp_ball);
-
-static int ab8500_gpadc_main_charger_v_show(struct seq_file *s, void *p)
-{
-	int main_charger_v_raw;
-	int main_charger_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		MAIN_CHARGER_V, main_charger_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", main_charger_v_convert, main_charger_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_main_charger_v);
-
-static int ab8500_gpadc_acc_detect1_show(struct seq_file *s, void *p)
-{
-	int acc_detect1_raw;
-	int acc_detect1_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1,
-		acc_detect1_raw);
-
-	seq_printf(s, "%d,0x%X\n", acc_detect1_convert, acc_detect1_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_acc_detect1);
-
-static int ab8500_gpadc_acc_detect2_show(struct seq_file *s, void *p)
-{
-	int acc_detect2_raw;
-	int acc_detect2_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		ACC_DETECT2, acc_detect2_raw);
-
-	seq_printf(s, "%d,0x%X\n", acc_detect2_convert, acc_detect2_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_acc_detect2);
-
-static int ab8500_gpadc_aux1_show(struct seq_file *s, void *p)
-{
-	int aux1_raw;
-	int aux1_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1,
-		aux1_raw);
-
-	seq_printf(s, "%d,0x%X\n", aux1_convert, aux1_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_aux1);
-
-static int ab8500_gpadc_aux2_show(struct seq_file *s, void *p)
-{
-	int aux2_raw;
-	int aux2_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2,
-		aux2_raw);
-
-	seq_printf(s, "%d,0x%X\n", aux2_convert, aux2_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_aux2);
-
-static int ab8500_gpadc_main_bat_v_show(struct seq_file *s, void *p)
-{
-	int main_bat_v_raw;
-	int main_bat_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
-		main_bat_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", main_bat_v_convert, main_bat_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_main_bat_v);
-
-static int ab8500_gpadc_vbus_v_show(struct seq_file *s, void *p)
-{
-	int vbus_v_raw;
-	int vbus_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbus_v_raw =  ab8500_gpadc_read_raw(gpadc, VBUS_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V,
-		vbus_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", vbus_v_convert, vbus_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_vbus_v);
-
-static int ab8500_gpadc_main_charger_c_show(struct seq_file *s, void *p)
-{
-	int main_charger_c_raw;
-	int main_charger_c_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		MAIN_CHARGER_C, main_charger_c_raw);
-
-	seq_printf(s, "%d,0x%X\n", main_charger_c_convert, main_charger_c_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_main_charger_c);
-
-static int ab8500_gpadc_usb_charger_c_show(struct seq_file *s, void *p)
-{
-	int usb_charger_c_raw;
-	int usb_charger_c_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		USB_CHARGER_C, usb_charger_c_raw);
-
-	seq_printf(s, "%d,0x%X\n", usb_charger_c_convert, usb_charger_c_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_usb_charger_c);
-
-static int ab8500_gpadc_bk_bat_v_show(struct seq_file *s, void *p)
-{
-	int bk_bat_v_raw;
-	int bk_bat_v_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-		BK_BAT_V, bk_bat_v_raw);
-
-	seq_printf(s, "%d,0x%X\n", bk_bat_v_convert, bk_bat_v_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_bk_bat_v);
-
-static int ab8500_gpadc_die_temp_show(struct seq_file *s, void *p)
-{
-	int die_temp_raw;
-	int die_temp_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP,
-		die_temp_raw);
-
-	seq_printf(s, "%d,0x%X\n", die_temp_convert, die_temp_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_die_temp);
-
-static int ab8500_gpadc_usb_id_show(struct seq_file *s, void *p)
-{
-	int usb_id_raw;
-	int usb_id_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	usb_id_raw = ab8500_gpadc_read_raw(gpadc, USB_ID,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	usb_id_convert = ab8500_gpadc_ad_to_voltage(gpadc, USB_ID,
-		usb_id_raw);
-
-	seq_printf(s, "%d,0x%X\n", usb_id_convert, usb_id_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8500_gpadc_usb_id);
-
-static int ab8540_gpadc_xtal_temp_show(struct seq_file *s, void *p)
-{
-	int xtal_temp_raw;
-	int xtal_temp_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	xtal_temp_raw = ab8500_gpadc_read_raw(gpadc, XTAL_TEMP,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	xtal_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, XTAL_TEMP,
-		xtal_temp_raw);
-
-	seq_printf(s, "%d,0x%X\n", xtal_temp_convert, xtal_temp_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_xtal_temp);
-
-static int ab8540_gpadc_vbat_true_meas_show(struct seq_file *s, void *p)
-{
-	int vbat_true_meas_raw;
-	int vbat_true_meas_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbat_true_meas_raw = ab8500_gpadc_read_raw(gpadc, VBAT_TRUE_MEAS,
-		avg_sample, trig_edge, trig_timer, conv_type);
-	vbat_true_meas_convert =
-		ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS,
-					   vbat_true_meas_raw);
-
-	seq_printf(s, "%d,0x%X\n", vbat_true_meas_convert, vbat_true_meas_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_vbat_true_meas);
-
-static int ab8540_gpadc_bat_ctrl_and_ibat_show(struct seq_file *s, void *p)
-{
-	int bat_ctrl_raw;
-	int bat_ctrl_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bat_ctrl_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_CTRL_AND_IBAT,
-		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
-
-	bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, BAT_CTRL,
-		bat_ctrl_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   bat_ctrl_convert, bat_ctrl_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_bat_ctrl_and_ibat);
-
-static int ab8540_gpadc_vbat_meas_and_ibat_show(struct seq_file *s, void *p)
-{
-	int vbat_meas_raw;
-	int vbat_meas_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbat_meas_raw = ab8500_gpadc_double_read_raw(gpadc, VBAT_MEAS_AND_IBAT,
-		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
-	vbat_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
-		vbat_meas_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   vbat_meas_convert, vbat_meas_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_vbat_meas_and_ibat);
-
-static int ab8540_gpadc_vbat_true_meas_and_ibat_show(struct seq_file *s, void *p)
-{
-	int vbat_true_meas_raw;
-	int vbat_true_meas_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbat_true_meas_raw = ab8500_gpadc_double_read_raw(gpadc,
-			VBAT_TRUE_MEAS_AND_IBAT, avg_sample, trig_edge,
-			trig_timer, conv_type, &ibat_raw);
-	vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-			VBAT_TRUE_MEAS, vbat_true_meas_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   vbat_true_meas_convert, vbat_true_meas_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_vbat_true_meas_and_ibat);
-
-static int ab8540_gpadc_bat_temp_and_ibat_show(struct seq_file *s, void *p)
-{
-	int bat_temp_raw;
-	int bat_temp_convert;
-	int ibat_raw;
-	int ibat_convert;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bat_temp_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_TEMP_AND_IBAT,
-		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
-	bat_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
-		bat_temp_raw);
-	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
-		ibat_raw);
-
-	seq_printf(s,
-		   "%d,0x%X\n"
-		   "%d,0x%X\n",
-		   bat_temp_convert, bat_temp_raw,
-		   ibat_convert, ibat_raw);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_bat_temp_and_ibat);
-
-static int ab8540_gpadc_otp_calib_show(struct seq_file *s, void *p)
-{
-	struct ab8500_gpadc *gpadc;
-	u16 vmain_l, vmain_h, btemp_l, btemp_h;
-	u16 vbat_l, vbat_h, ibat_l, ibat_h;
-
-	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	ab8540_gpadc_get_otp(gpadc, &vmain_l, &vmain_h, &btemp_l, &btemp_h,
-			&vbat_l, &vbat_h, &ibat_l, &ibat_h);
-	seq_printf(s,
-		   "VMAIN_L:0x%X\n"
-		   "VMAIN_H:0x%X\n"
-		   "BTEMP_L:0x%X\n"
-		   "BTEMP_H:0x%X\n"
-		   "VBAT_L:0x%X\n"
-		   "VBAT_H:0x%X\n"
-		   "IBAT_L:0x%X\n"
-		   "IBAT_H:0x%X\n",
-		   vmain_l, vmain_h, btemp_l, btemp_h,
-		   vbat_l, vbat_h, ibat_l, ibat_h);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(ab8540_gpadc_otp_calib);
-
-static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", avg_sample);
-
-	return 0;
-}
-
-static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_avg_sample_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_avg_sample_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_avg_sample;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_avg_sample);
-	if (err)
-		return err;
-
-	if ((user_avg_sample == SAMPLE_1) || (user_avg_sample == SAMPLE_4)
-			|| (user_avg_sample == SAMPLE_8)
-			|| (user_avg_sample == SAMPLE_16)) {
-		avg_sample = (u8) user_avg_sample;
-	} else {
-		dev_err(dev,
-			"debugfs err input: should be egal to 1, 4, 8 or 16\n");
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_avg_sample_fops = {
-	.open = ab8500_gpadc_avg_sample_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_avg_sample_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", trig_edge);
-
-	return 0;
-}
-
-static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_trig_edge_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_trig_edge_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_trig_edge;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_trig_edge);
-	if (err)
-		return err;
-
-	if ((user_trig_edge == RISING_EDGE)
-			|| (user_trig_edge == FALLING_EDGE)) {
-		trig_edge = (u8) user_trig_edge;
-	} else {
-		dev_err(dev, "Wrong input:\n"
-			"Enter 0. Rising edge\n"
-			"Enter 1. Falling edge\n");
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_trig_edge_fops = {
-	.open = ab8500_gpadc_trig_edge_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_trig_edge_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", trig_timer);
-
-	return 0;
-}
-
-static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_trig_timer_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_trig_timer_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_trig_timer;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_trig_timer);
-	if (err)
-		return err;
-
-	if (user_trig_timer & ~0xFF) {
-		dev_err(dev,
-			"debugfs error input: should be between 0 to 255\n");
-		return -EINVAL;
-	}
-
-	trig_timer = (u8) user_trig_timer;
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_trig_timer_fops = {
-	.open = ab8500_gpadc_trig_timer_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_trig_timer_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p)
-{
-	seq_printf(s, "%d\n", conv_type);
-
-	return 0;
-}
-
-static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ab8500_gpadc_conv_type_print,
-		inode->i_private);
-}
-
-static ssize_t ab8500_gpadc_conv_type_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
-{
-	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	unsigned long user_conv_type;
-	int err;
-
-	err = kstrtoul_from_user(user_buf, count, 0, &user_conv_type);
-	if (err)
-		return err;
-
-	if ((user_conv_type == ADC_SW)
-			|| (user_conv_type == ADC_HW)) {
-		conv_type = (u8) user_conv_type;
-	} else {
-		dev_err(dev, "Wrong input:\n"
-			"Enter 0. ADC SW conversion\n"
-			"Enter 1. ADC HW conversion\n");
-		return -EINVAL;
-	}
-
-	return count;
-}
-
-static const struct file_operations ab8500_gpadc_conv_type_fops = {
-	.open = ab8500_gpadc_conv_type_open,
-	.read = seq_read,
-	.write = ab8500_gpadc_conv_type_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
 /*
  * return length of an ASCII numerical value, 0 is string is not a
  * numerical value.
@@ -2647,7 +2013,6 @@ static const struct file_operations ab8500_hwreg_fops = {
 static int ab8500_debug_probe(struct platform_device *plf)
 {
 	struct dentry *ab8500_dir;
-	struct dentry *ab8500_gpadc_dir;
 	struct ab8500 *ab8500;
 	struct resource *res;
 
@@ -2689,9 +2054,6 @@ static int ab8500_debug_probe(struct platform_device *plf)
 
 	ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL);
 
-	ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING,
-					      ab8500_dir);
-
 	debugfs_create_file("all-bank-registers", S_IRUGO, ab8500_dir,
 			    &plf->dev, &ab8500_bank_registers_fops);
 	debugfs_create_file("all-banks", S_IRUGO, ab8500_dir,
@@ -2727,83 +2089,6 @@ static int ab8500_debug_probe(struct platform_device *plf)
 			    &plf->dev, &ab8500_hwreg_fops);
 	debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP),
 			    ab8500_dir, &plf->dev, &ab8500_modem_fops);
-	debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_bat_ctrl_fops);
-	debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_btemp_ball_fops);
-	debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_main_charger_v_fops);
-	debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_acc_detect1_fops);
-	debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_acc_detect2_fops);
-	debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_aux1_fops);
-	debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_aux2_fops);
-	debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_main_bat_v_fops);
-	debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_vbus_v_fops);
-	debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_main_charger_c_fops);
-	debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_usb_charger_c_fops);
-	debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_bk_bat_v_fops);
-	debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_die_temp_fops);
-	debugfs_create_file("usb_id", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_usb_id_fops);
-	if (is_ab8540(ab8500)) {
-		debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_xtal_temp_fops);
-		debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_vbat_true_meas_fops);
-		debugfs_create_file("batctrl_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_bat_ctrl_and_ibat_fops);
-		debugfs_create_file("vbatmeas_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_vbat_meas_and_ibat_fops);
-		debugfs_create_file("vbattruemeas_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_vbat_true_meas_and_ibat_fops);
-		debugfs_create_file("battemp_and_ibat", (S_IRUGO | S_IWUGO),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_bat_temp_and_ibat_fops);
-		debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP),
-				    ab8500_gpadc_dir, &plf->dev,
-				    &ab8540_gpadc_otp_calib_fops);
-	}
-	debugfs_create_file("avg_sample", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_avg_sample_fops);
-	debugfs_create_file("trig_edge", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_trig_edge_fops);
-	debugfs_create_file("trig_timer", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_trig_timer_fops);
-	debugfs_create_file("conv_type", (S_IRUGO | S_IWUSR | S_IWGRP),
-			    ab8500_gpadc_dir, &plf->dev,
-			    &ab8500_gpadc_conv_type_fops);
 
 	return 0;
 }
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
deleted file mode 100644
index 005f9ee34cd1..000000000000
--- a/drivers/mfd/ab8500-gpadc.c
+++ /dev/null
@@ -1,1075 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Arun R Murthy <arun.murthy@stericsson.com>
- * Author: Daniel Willerud <daniel.willerud@stericsson.com>
- * Author: Johan Palsson <johan.palsson@stericsson.com>
- * Author: M'boumba Cedric Madianga
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/pm_runtime.h>
-#include <linux/platform_device.h>
-#include <linux/completion.h>
-#include <linux/regulator/consumer.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
-
-/*
- * GPADC register offsets
- * Bank : 0x0A
- */
-#define AB8500_GPADC_CTRL1_REG		0x00
-#define AB8500_GPADC_CTRL2_REG		0x01
-#define AB8500_GPADC_CTRL3_REG		0x02
-#define AB8500_GPADC_AUTO_TIMER_REG	0x03
-#define AB8500_GPADC_STAT_REG		0x04
-#define AB8500_GPADC_MANDATAL_REG	0x05
-#define AB8500_GPADC_MANDATAH_REG	0x06
-#define AB8500_GPADC_AUTODATAL_REG	0x07
-#define AB8500_GPADC_AUTODATAH_REG	0x08
-#define AB8500_GPADC_MUX_CTRL_REG	0x09
-#define AB8540_GPADC_MANDATA2L_REG	0x09
-#define AB8540_GPADC_MANDATA2H_REG	0x0A
-#define AB8540_GPADC_APEAAX_REG		0x10
-#define AB8540_GPADC_APEAAT_REG		0x11
-#define AB8540_GPADC_APEAAM_REG		0x12
-#define AB8540_GPADC_APEAAH_REG		0x13
-#define AB8540_GPADC_APEAAL_REG		0x14
-
-/*
- * OTP register offsets
- * Bank : 0x15
- */
-#define AB8500_GPADC_CAL_1	0x0F
-#define AB8500_GPADC_CAL_2	0x10
-#define AB8500_GPADC_CAL_3	0x11
-#define AB8500_GPADC_CAL_4	0x12
-#define AB8500_GPADC_CAL_5	0x13
-#define AB8500_GPADC_CAL_6	0x14
-#define AB8500_GPADC_CAL_7	0x15
-/* New calibration for 8540 */
-#define AB8540_GPADC_OTP4_REG_7	0x38
-#define AB8540_GPADC_OTP4_REG_6	0x39
-#define AB8540_GPADC_OTP4_REG_5	0x3A
-
-/* gpadc constants */
-#define EN_VINTCORE12		0x04
-#define EN_VTVOUT		0x02
-#define EN_GPADC		0x01
-#define DIS_GPADC		0x00
-#define AVG_1			0x00
-#define AVG_4			0x20
-#define AVG_8			0x40
-#define AVG_16			0x60
-#define ADC_SW_CONV		0x04
-#define EN_ICHAR		0x80
-#define BTEMP_PULL_UP		0x08
-#define EN_BUF			0x40
-#define DIS_ZERO		0x00
-#define GPADC_BUSY		0x01
-#define EN_FALLING		0x10
-#define EN_TRIG_EDGE		0x02
-#define EN_VBIAS_XTAL_TEMP	0x02
-
-/* GPADC constants from AB8500 spec, UM0836 */
-#define ADC_RESOLUTION		1024
-#define ADC_CH_BTEMP_MIN	0
-#define ADC_CH_BTEMP_MAX	1350
-#define ADC_CH_DIETEMP_MIN	0
-#define ADC_CH_DIETEMP_MAX	1350
-#define ADC_CH_CHG_V_MIN	0
-#define ADC_CH_CHG_V_MAX	20030
-#define ADC_CH_ACCDET2_MIN	0
-#define ADC_CH_ACCDET2_MAX	2500
-#define ADC_CH_VBAT_MIN		2300
-#define ADC_CH_VBAT_MAX		4800
-#define ADC_CH_CHG_I_MIN	0
-#define ADC_CH_CHG_I_MAX	1500
-#define ADC_CH_BKBAT_MIN	0
-#define ADC_CH_BKBAT_MAX	3200
-
-/* GPADC constants from AB8540 spec */
-#define ADC_CH_IBAT_MIN		(-6000) /* mA range measured by ADC for ibat */
-#define ADC_CH_IBAT_MAX		6000
-#define ADC_CH_IBAT_MIN_V	(-60)	/* mV range measured by ADC for ibat */
-#define ADC_CH_IBAT_MAX_V	60
-#define IBAT_VDROP_L		(-56)  /* mV */
-#define IBAT_VDROP_H		56
-
-/* This is used to not lose precision when dividing to get gain and offset */
-#define CALIB_SCALE		1000
-/*
- * Number of bits shift used to not lose precision
- * when dividing to get ibat gain.
- */
-#define CALIB_SHIFT_IBAT	20
-
-/* Time in ms before disabling regulator */
-#define GPADC_AUDOSUSPEND_DELAY		1
-
-#define CONVERSION_TIME			500 /* ms */
-
-enum cal_channels {
-	ADC_INPUT_VMAIN = 0,
-	ADC_INPUT_BTEMP,
-	ADC_INPUT_VBAT,
-	ADC_INPUT_IBAT,
-	NBR_CAL_INPUTS,
-};
-
-/**
- * struct adc_cal_data - Table for storing gain and offset for the calibrated
- * ADC channels
- * @gain:		Gain of the ADC channel
- * @offset:		Offset of the ADC channel
- */
-struct adc_cal_data {
-	s64 gain;
-	s64 offset;
-	u16 otp_calib_hi;
-	u16 otp_calib_lo;
-};
-
-/**
- * struct ab8500_gpadc - AB8500 GPADC device information
- * @dev:			pointer to the struct device
- * @node:			a list of AB8500 GPADCs, hence prepared for
-				reentrance
- * @parent:			pointer to the struct ab8500
- * @ab8500_gpadc_complete:	pointer to the struct completion, to indicate
- *				the completion of gpadc conversion
- * @ab8500_gpadc_lock:		structure of type mutex
- * @regu:			pointer to the struct regulator
- * @irq_sw:			interrupt number that is used by gpadc for Sw
- *				conversion
- * @irq_hw:			interrupt number that is used by gpadc for Hw
- *				conversion
- * @cal_data			array of ADC calibration data structs
- */
-struct ab8500_gpadc {
-	struct device *dev;
-	struct list_head node;
-	struct ab8500 *parent;
-	struct completion ab8500_gpadc_complete;
-	struct mutex ab8500_gpadc_lock;
-	struct regulator *regu;
-	int irq_sw;
-	int irq_hw;
-	struct adc_cal_data cal_data[NBR_CAL_INPUTS];
-};
-
-static LIST_HEAD(ab8500_gpadc_list);
-
-/**
- * ab8500_gpadc_get() - returns a reference to the primary AB8500 GPADC
- * (i.e. the first GPADC in the instance list)
- */
-struct ab8500_gpadc *ab8500_gpadc_get(char *name)
-{
-	struct ab8500_gpadc *gpadc;
-
-	list_for_each_entry(gpadc, &ab8500_gpadc_list, node) {
-		if (!strcmp(name, dev_name(gpadc->dev)))
-			return gpadc;
-	}
-
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(ab8500_gpadc_get);
-
-/**
- * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
- */
-int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
-	int ad_value)
-{
-	int res;
-
-	switch (channel) {
-	case MAIN_CHARGER_V:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) {
-			res = ADC_CH_CHG_V_MIN + (ADC_CH_CHG_V_MAX -
-				ADC_CH_CHG_V_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VMAIN].gain +
-			gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE;
-		break;
-
-	case XTAL_TEMP:
-	case BAT_CTRL:
-	case BTEMP_BALL:
-	case ACC_DETECT1:
-	case ADC_AUX1:
-	case ADC_AUX2:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_BTEMP].gain) {
-			res = ADC_CH_BTEMP_MIN + (ADC_CH_BTEMP_MAX -
-				ADC_CH_BTEMP_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_BTEMP].gain +
-			gpadc->cal_data[ADC_INPUT_BTEMP].offset) / CALIB_SCALE;
-		break;
-
-	case MAIN_BAT_V:
-	case VBAT_TRUE_MEAS:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) {
-			res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX -
-				ADC_CH_VBAT_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_VBAT].gain +
-			gpadc->cal_data[ADC_INPUT_VBAT].offset) / CALIB_SCALE;
-		break;
-
-	case DIE_TEMP:
-		res = ADC_CH_DIETEMP_MIN +
-			(ADC_CH_DIETEMP_MAX - ADC_CH_DIETEMP_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case ACC_DETECT2:
-		res = ADC_CH_ACCDET2_MIN +
-			(ADC_CH_ACCDET2_MAX - ADC_CH_ACCDET2_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case VBUS_V:
-		res = ADC_CH_CHG_V_MIN +
-			(ADC_CH_CHG_V_MAX - ADC_CH_CHG_V_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case MAIN_CHARGER_C:
-	case USB_CHARGER_C:
-		res = ADC_CH_CHG_I_MIN +
-			(ADC_CH_CHG_I_MAX - ADC_CH_CHG_I_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case BK_BAT_V:
-		res = ADC_CH_BKBAT_MIN +
-			(ADC_CH_BKBAT_MAX - ADC_CH_BKBAT_MIN) * ad_value /
-			ADC_RESOLUTION;
-		break;
-
-	case IBAT_VIRTUAL_CHANNEL:
-		/* For some reason we don't have calibrated data */
-		if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) {
-			res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX -
-				ADC_CH_IBAT_MIN) * ad_value /
-				ADC_RESOLUTION;
-			break;
-		}
-		/* Here we can use the calibrated data */
-		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain +
-				gpadc->cal_data[ADC_INPUT_IBAT].offset)
-				>> CALIB_SHIFT_IBAT;
-		break;
-
-	default:
-		dev_err(gpadc->dev,
-			"unknown channel, not possible to convert\n");
-		res = -EINVAL;
-		break;
-
-	}
-	return res;
-}
-EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
-
-/**
- * ab8500_gpadc_sw_hw_convert() - gpadc conversion
- * @channel:	analog channel to be converted to digital data
- * @avg_sample:  number of ADC sample to average
- * @trig_egde:  selected ADC trig edge
- * @trig_timer: selected ADC trigger delay timer
- * @conv_type: selected conversion type (HW or SW conversion)
- *
- * This function converts the selected analog i/p to digital
- * data.
- */
-int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
-{
-	int ad_value;
-	int voltage;
-
-	ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
-			trig_edge, trig_timer, conv_type);
-
-	/* On failure retry a second time */
-	if (ad_value < 0)
-		ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
-			trig_edge, trig_timer, conv_type);
-	if (ad_value < 0) {
-		dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
-				channel);
-		return ad_value;
-	}
-
-	voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
-	if (voltage < 0)
-		dev_err(gpadc->dev,
-			"GPADC to voltage conversion failed ch: %d AD: 0x%x\n",
-			channel, ad_value);
-
-	return voltage;
-}
-EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert);
-
-/**
- * ab8500_gpadc_read_raw() - gpadc read
- * @channel:	analog channel to be read
- * @avg_sample:  number of ADC sample to average
- * @trig_edge:  selected trig edge
- * @trig_timer: selected ADC trigger delay timer
- * @conv_type: selected conversion type (HW or SW conversion)
- *
- * This function obtains the raw ADC value for an hardware conversion,
- * this then needs to be converted by calling ab8500_gpadc_ad_to_voltage()
- */
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
-{
-	return ab8500_gpadc_double_read_raw(gpadc, channel, avg_sample,
-					    trig_edge, trig_timer, conv_type,
-					    NULL);
-}
-
-int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
-		int *ibat)
-{
-	int ret;
-	int looplimit = 0;
-	unsigned long completion_timeout;
-	u8 val, low_data, high_data, low_data2, high_data2;
-	u8 val_reg1 = 0;
-	unsigned int delay_min = 0;
-	unsigned int delay_max = 0;
-	u8 data_low_addr, data_high_addr;
-
-	if (!gpadc)
-		return -ENODEV;
-
-	/* check if convertion is supported */
-	if ((gpadc->irq_sw < 0) && (conv_type == ADC_SW))
-		return -ENOTSUPP;
-	if ((gpadc->irq_hw < 0) && (conv_type == ADC_HW))
-		return -ENOTSUPP;
-
-	mutex_lock(&gpadc->ab8500_gpadc_lock);
-	/* Enable VTVout LDO this is required for GPADC */
-	pm_runtime_get_sync(gpadc->dev);
-
-	/* Check if ADC is not busy, lock and proceed */
-	do {
-		ret = abx500_get_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_STAT_REG, &val);
-		if (ret < 0)
-			goto out;
-		if (!(val & GPADC_BUSY))
-			break;
-		msleep(20);
-	} while (++looplimit < 10);
-	if (looplimit >= 10 && (val & GPADC_BUSY)) {
-		dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* Enable GPADC */
-	val_reg1 |= EN_GPADC;
-
-	/* Select the channel source and set average samples */
-	switch (avg_sample) {
-	case SAMPLE_1:
-		val = channel | AVG_1;
-		break;
-	case SAMPLE_4:
-		val = channel | AVG_4;
-		break;
-	case SAMPLE_8:
-		val = channel | AVG_8;
-		break;
-	default:
-		val = channel | AVG_16;
-		break;
-	}
-
-	if (conv_type == ADC_HW) {
-		ret = abx500_set_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val);
-		val_reg1 |= EN_TRIG_EDGE;
-		if (trig_edge)
-			val_reg1 |= EN_FALLING;
-	} else
-		ret = abx500_set_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
-	if (ret < 0) {
-		dev_err(gpadc->dev,
-			"gpadc_conversion: set avg samples failed\n");
-		goto out;
-	}
-
-	/*
-	 * Enable ADC, buffering, select rising edge and enable ADC path
-	 * charging current sense if it needed, ABB 3.0 needs some special
-	 * treatment too.
-	 */
-	switch (channel) {
-	case MAIN_CHARGER_C:
-	case USB_CHARGER_C:
-		val_reg1 |= EN_BUF | EN_ICHAR;
-		break;
-	case BTEMP_BALL:
-		if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
-			val_reg1 |= EN_BUF | BTEMP_PULL_UP;
-			/*
-			* Delay might be needed for ABB8500 cut 3.0, if not,
-			* remove when hardware will be availible
-			*/
-			delay_min = 1000; /* Delay in micro seconds */
-			delay_max = 10000; /* large range optimises sleepmode */
-			break;
-		}
-		/* Intentional fallthrough */
-	default:
-		val_reg1 |= EN_BUF;
-		break;
-	}
-
-	/* Write configuration to register */
-	ret = abx500_set_register_interruptible(gpadc->dev,
-		AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1);
-	if (ret < 0) {
-		dev_err(gpadc->dev,
-			"gpadc_conversion: set Control register failed\n");
-		goto out;
-	}
-
-	if (delay_min != 0)
-		usleep_range(delay_min, delay_max);
-
-	if (conv_type == ADC_HW) {
-		/* Set trigger delay timer */
-		ret = abx500_set_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"gpadc_conversion: trig timer failed\n");
-			goto out;
-		}
-		completion_timeout = 2 * HZ;
-		data_low_addr = AB8500_GPADC_AUTODATAL_REG;
-		data_high_addr = AB8500_GPADC_AUTODATAH_REG;
-	} else {
-		/* Start SW conversion */
-		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
-			ADC_SW_CONV, ADC_SW_CONV);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"gpadc_conversion: start s/w conv failed\n");
-			goto out;
-		}
-		completion_timeout = msecs_to_jiffies(CONVERSION_TIME);
-		data_low_addr = AB8500_GPADC_MANDATAL_REG;
-		data_high_addr = AB8500_GPADC_MANDATAH_REG;
-	}
-
-	/* wait for completion of conversion */
-	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
-			completion_timeout)) {
-		dev_err(gpadc->dev,
-			"timeout didn't receive GPADC conv interrupt\n");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/* Read the converted RAW data */
-	ret = abx500_get_register_interruptible(gpadc->dev,
-			AB8500_GPADC, data_low_addr, &low_data);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
-		goto out;
-	}
-
-	ret = abx500_get_register_interruptible(gpadc->dev,
-		AB8500_GPADC, data_high_addr, &high_data);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n");
-		goto out;
-	}
-
-	/* Check if double convertion is required */
-	if ((channel == BAT_CTRL_AND_IBAT) ||
-			(channel == VBAT_MEAS_AND_IBAT) ||
-			(channel == VBAT_TRUE_MEAS_AND_IBAT) ||
-			(channel == BAT_TEMP_AND_IBAT)) {
-
-		if (conv_type == ADC_HW) {
-			/* not supported */
-			ret = -ENOTSUPP;
-			dev_err(gpadc->dev,
-				"gpadc_conversion: only SW double conversion supported\n");
-			goto out;
-		} else {
-			/* Read the converted RAW data 2 */
-			ret = abx500_get_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG,
-				&low_data2);
-			if (ret < 0) {
-				dev_err(gpadc->dev,
-					"gpadc_conversion: read sw low data 2 failed\n");
-				goto out;
-			}
-
-			ret = abx500_get_register_interruptible(gpadc->dev,
-				AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG,
-				&high_data2);
-			if (ret < 0) {
-				dev_err(gpadc->dev,
-					"gpadc_conversion: read sw high data 2 failed\n");
-				goto out;
-			}
-			if (ibat != NULL) {
-				*ibat = (high_data2 << 8) | low_data2;
-			} else {
-				dev_warn(gpadc->dev,
-					"gpadc_conversion: ibat not stored\n");
-			}
-
-		}
-	}
-
-	/* Disable GPADC */
-	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
-		goto out;
-	}
-
-	/* Disable VTVout LDO this is required for GPADC */
-	pm_runtime_mark_last_busy(gpadc->dev);
-	pm_runtime_put_autosuspend(gpadc->dev);
-
-	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-
-	return (high_data << 8) | low_data;
-
-out:
-	/*
-	 * It has shown to be needed to turn off the GPADC if an error occurs,
-	 * otherwise we might have problem when waiting for the busy bit in the
-	 * GPADC status register to go low. In V1.1 there wait_for_completion
-	 * seems to timeout when waiting for an interrupt.. Not seen in V2.0
-	 */
-	(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-	pm_runtime_put(gpadc->dev);
-	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-	dev_err(gpadc->dev,
-		"gpadc_conversion: Failed to AD convert channel %d\n", channel);
-	return ret;
-}
-EXPORT_SYMBOL(ab8500_gpadc_read_raw);
-
-/**
- * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
- * @irq:	irq number
- * @data:	pointer to the data passed during request irq
- *
- * This is a interrupt service routine for gpadc conversion completion.
- * Notifies the gpadc completion is completed and the converted raw value
- * can be read from the registers.
- * Returns IRQ status(IRQ_HANDLED)
- */
-static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc)
-{
-	struct ab8500_gpadc *gpadc = _gpadc;
-
-	complete(&gpadc->ab8500_gpadc_complete);
-
-	return IRQ_HANDLED;
-}
-
-static int otp_cal_regs[] = {
-	AB8500_GPADC_CAL_1,
-	AB8500_GPADC_CAL_2,
-	AB8500_GPADC_CAL_3,
-	AB8500_GPADC_CAL_4,
-	AB8500_GPADC_CAL_5,
-	AB8500_GPADC_CAL_6,
-	AB8500_GPADC_CAL_7,
-};
-
-static int otp4_cal_regs[] = {
-	AB8540_GPADC_OTP4_REG_7,
-	AB8540_GPADC_OTP4_REG_6,
-	AB8540_GPADC_OTP4_REG_5,
-};
-
-static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
-{
-	int i;
-	int ret[ARRAY_SIZE(otp_cal_regs)];
-	u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
-	int ret_otp4[ARRAY_SIZE(otp4_cal_regs)];
-	u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)];
-	int vmain_high, vmain_low;
-	int btemp_high, btemp_low;
-	int vbat_high, vbat_low;
-	int ibat_high, ibat_low;
-	s64 V_gain, V_offset, V2A_gain, V2A_offset;
-	struct ab8500 *ab8500;
-
-	ab8500 = gpadc->parent;
-
-	/* First we read all OTP registers and store the error code */
-	for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
-		ret[i] = abx500_get_register_interruptible(gpadc->dev,
-			AB8500_OTP_EMUL, otp_cal_regs[i],  &gpadc_cal[i]);
-		if (ret[i] < 0)
-			dev_err(gpadc->dev, "%s: read otp reg 0x%02x failed\n",
-				__func__, otp_cal_regs[i]);
-	}
-
-	/*
-	 * The ADC calibration data is stored in OTP registers.
-	 * The layout of the calibration data is outlined below and a more
-	 * detailed description can be found in UM0836
-	 *
-	 * vm_h/l = vmain_high/low
-	 * bt_h/l = btemp_high/low
-	 * vb_h/l = vbat_high/low
-	 *
-	 * Data bits 8500/9540:
-	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |						   | vm_h9 | vm_h8
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |		   | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 *
-	 * Data bits 8540:
-	 * OTP2
-	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 *
-	 * Data bits 8540:
-	 * OTP4
-	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * |					   | ib_h9 | ib_h8 | ib_h7
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5
-	 * |.......|.......|.......|.......|.......|.......|.......|.......
-	 * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 |
-	 *
-	 *
-	 * Ideal output ADC codes corresponding to injected input voltages
-	 * during manufacturing is:
-	 *
-	 * vmain_high: Vin = 19500mV / ADC ideal code = 997
-	 * vmain_low:  Vin = 315mV   / ADC ideal code = 16
-	 * btemp_high: Vin = 1300mV  / ADC ideal code = 985
-	 * btemp_low:  Vin = 21mV    / ADC ideal code = 16
-	 * vbat_high:  Vin = 4700mV  / ADC ideal code = 982
-	 * vbat_low:   Vin = 2380mV  / ADC ideal code = 33
-	 */
-
-	if (is_ab8540(ab8500)) {
-		/* Calculate gain and offset for VMAIN if all reads succeeded*/
-		if (!(ret[1] < 0 || ret[2] < 0)) {
-			vmain_high = (((gpadc_cal[1] & 0xFF) << 2) |
-				((gpadc_cal[2] & 0xC0) >> 6));
-			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
-				(u16)vmain_high;
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
-				(u16)vmain_low;
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
-				(19500 - 315) / (vmain_high - vmain_low);
-			gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
-				19500 - (CALIB_SCALE * (19500 - 315) /
-				(vmain_high - vmain_low)) * vmain_high;
-		} else {
-		gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
-		}
-
-		/* Read IBAT calibration Data */
-		for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) {
-			ret_otp4[i] = abx500_get_register_interruptible(
-					gpadc->dev, AB8500_OTP_EMUL,
-					otp4_cal_regs[i],  &gpadc_otp4[i]);
-			if (ret_otp4[i] < 0)
-				dev_err(gpadc->dev,
-					"%s: read otp4 reg 0x%02x failed\n",
-					__func__, otp4_cal_regs[i]);
-		}
-
-		/* Calculate gain and offset for IBAT if all reads succeeded */
-		if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) {
-			ibat_high = (((gpadc_otp4[0] & 0x07) << 7) |
-				((gpadc_otp4[1] & 0xFE) >> 1));
-			ibat_low = (((gpadc_otp4[1] & 0x01) << 5) |
-				((gpadc_otp4[2] & 0xF8) >> 3));
-
-			gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi =
-				(u16)ibat_high;
-			gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo =
-				(u16)ibat_low;
-
-			V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L)
-				<< CALIB_SHIFT_IBAT) / (ibat_high - ibat_low);
-
-			V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) -
-				(((IBAT_VDROP_H - IBAT_VDROP_L) <<
-				CALIB_SHIFT_IBAT) / (ibat_high - ibat_low))
-				* ibat_high;
-			/*
-			 * Result obtained is in mV (at a scale factor),
-			 * we need to calculate gain and offset to get mA
-			 */
-			V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/
-				(ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
-			V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN -
-				ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V)
-				<< CALIB_SHIFT_IBAT)
-				/ (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
-
-			gpadc->cal_data[ADC_INPUT_IBAT].gain =
-				V_gain * V2A_gain;
-			gpadc->cal_data[ADC_INPUT_IBAT].offset =
-				V_offset * V2A_gain + V2A_offset;
-		} else {
-			gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
-		}
-
-		dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n",
-			gpadc->cal_data[ADC_INPUT_IBAT].gain,
-			gpadc->cal_data[ADC_INPUT_IBAT].offset);
-	} else {
-		/* Calculate gain and offset for VMAIN if all reads succeeded */
-		if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
-			vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
-				((gpadc_cal[1] & 0x3F) << 2) |
-				((gpadc_cal[2] & 0xC0) >> 6));
-			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
-				(u16)vmain_high;
-			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
-				(u16)vmain_low;
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
-				(19500 - 315) / (vmain_high - vmain_low);
-
-			gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
-				19500 - (CALIB_SCALE * (19500 - 315) /
-				(vmain_high - vmain_low)) * vmain_high;
-		} else {
-			gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
-		}
-	}
-
-	/* Calculate gain and offset for BTEMP if all reads succeeded */
-	if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
-		btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
-			(gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7));
-		btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
-
-		gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi = (u16)btemp_high;
-		gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo = (u16)btemp_low;
-
-		gpadc->cal_data[ADC_INPUT_BTEMP].gain =
-			CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
-		gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 -
-			(CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low))
-			* btemp_high;
-	} else {
-		gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0;
-	}
-
-	/* Calculate gain and offset for VBAT if all reads succeeded */
-	if (!(ret[4] < 0 || ret[5] < 0 || ret[6] < 0)) {
-		vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
-		vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
-
-		gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi = (u16)vbat_high;
-		gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo = (u16)vbat_low;
-
-		gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE *
-			(4700 - 2380) /	(vbat_high - vbat_low);
-		gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 -
-			(CALIB_SCALE * (4700 - 2380) /
-			(vbat_high - vbat_low)) * vbat_high;
-	} else {
-		gpadc->cal_data[ADC_INPUT_VBAT].gain = 0;
-	}
-
-	dev_dbg(gpadc->dev, "VMAIN gain %llu offset %llu\n",
-		gpadc->cal_data[ADC_INPUT_VMAIN].gain,
-		gpadc->cal_data[ADC_INPUT_VMAIN].offset);
-
-	dev_dbg(gpadc->dev, "BTEMP gain %llu offset %llu\n",
-		gpadc->cal_data[ADC_INPUT_BTEMP].gain,
-		gpadc->cal_data[ADC_INPUT_BTEMP].offset);
-
-	dev_dbg(gpadc->dev, "VBAT gain %llu offset %llu\n",
-		gpadc->cal_data[ADC_INPUT_VBAT].gain,
-		gpadc->cal_data[ADC_INPUT_VBAT].offset);
-}
-
-#ifdef CONFIG_PM
-static int ab8500_gpadc_runtime_suspend(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-
-	regulator_disable(gpadc->regu);
-	return 0;
-}
-
-static int ab8500_gpadc_runtime_resume(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-	int ret;
-
-	ret = regulator_enable(gpadc->regu);
-	if (ret)
-		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
-	return ret;
-}
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int ab8500_gpadc_suspend(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-
-	mutex_lock(&gpadc->ab8500_gpadc_lock);
-
-	pm_runtime_get_sync(dev);
-
-	regulator_disable(gpadc->regu);
-	return 0;
-}
-
-static int ab8500_gpadc_resume(struct device *dev)
-{
-	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
-	int ret;
-
-	ret = regulator_enable(gpadc->regu);
-	if (ret)
-		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
-
-	pm_runtime_mark_last_busy(gpadc->dev);
-	pm_runtime_put_autosuspend(gpadc->dev);
-
-	mutex_unlock(&gpadc->ab8500_gpadc_lock);
-	return ret;
-}
-#endif
-
-static int ab8500_gpadc_probe(struct platform_device *pdev)
-{
-	int ret = 0;
-	struct ab8500_gpadc *gpadc;
-
-	gpadc = devm_kzalloc(&pdev->dev,
-			     sizeof(struct ab8500_gpadc), GFP_KERNEL);
-	if (!gpadc)
-		return -ENOMEM;
-
-	gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
-	if (gpadc->irq_sw < 0)
-		dev_err(gpadc->dev, "failed to get platform sw_conv_end irq\n");
-
-	gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
-	if (gpadc->irq_hw < 0)
-		dev_err(gpadc->dev, "failed to get platform hw_conv_end irq\n");
-
-	gpadc->dev = &pdev->dev;
-	gpadc->parent = dev_get_drvdata(pdev->dev.parent);
-	mutex_init(&gpadc->ab8500_gpadc_lock);
-
-	/* Initialize completion used to notify completion of conversion */
-	init_completion(&gpadc->ab8500_gpadc_complete);
-
-	/* Register interrupts */
-	if (gpadc->irq_sw >= 0) {
-		ret = request_threaded_irq(gpadc->irq_sw, NULL,
-			ab8500_bm_gpadcconvend_handler,
-			IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
-			"ab8500-gpadc-sw",
-			gpadc);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"Failed to register interrupt irq: %d\n",
-				gpadc->irq_sw);
-			goto fail;
-		}
-	}
-
-	if (gpadc->irq_hw >= 0) {
-		ret = request_threaded_irq(gpadc->irq_hw, NULL,
-			ab8500_bm_gpadcconvend_handler,
-			IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
-			"ab8500-gpadc-hw",
-			gpadc);
-		if (ret < 0) {
-			dev_err(gpadc->dev,
-				"Failed to register interrupt irq: %d\n",
-				gpadc->irq_hw);
-			goto fail_irq;
-		}
-	}
-
-	/* VTVout LDO used to power up ab8500-GPADC */
-	gpadc->regu = devm_regulator_get(&pdev->dev, "vddadc");
-	if (IS_ERR(gpadc->regu)) {
-		ret = PTR_ERR(gpadc->regu);
-		dev_err(gpadc->dev, "failed to get vtvout LDO\n");
-		goto fail_irq;
-	}
-
-	platform_set_drvdata(pdev, gpadc);
-
-	ret = regulator_enable(gpadc->regu);
-	if (ret) {
-		dev_err(gpadc->dev, "Failed to enable vtvout LDO: %d\n", ret);
-		goto fail_enable;
-	}
-
-	pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
-	pm_runtime_use_autosuspend(gpadc->dev);
-	pm_runtime_set_active(gpadc->dev);
-	pm_runtime_enable(gpadc->dev);
-
-	ab8500_gpadc_read_calibration_data(gpadc);
-	list_add_tail(&gpadc->node, &ab8500_gpadc_list);
-	dev_dbg(gpadc->dev, "probe success\n");
-
-	return 0;
-
-fail_enable:
-fail_irq:
-	free_irq(gpadc->irq_sw, gpadc);
-	free_irq(gpadc->irq_hw, gpadc);
-fail:
-	return ret;
-}
-
-static int ab8500_gpadc_remove(struct platform_device *pdev)
-{
-	struct ab8500_gpadc *gpadc = platform_get_drvdata(pdev);
-
-	/* remove this gpadc entry from the list */
-	list_del(&gpadc->node);
-	/* remove interrupt  - completion of Sw ADC conversion */
-	if (gpadc->irq_sw >= 0)
-		free_irq(gpadc->irq_sw, gpadc);
-	if (gpadc->irq_hw >= 0)
-		free_irq(gpadc->irq_hw, gpadc);
-
-	pm_runtime_get_sync(gpadc->dev);
-	pm_runtime_disable(gpadc->dev);
-
-	regulator_disable(gpadc->regu);
-
-	pm_runtime_set_suspended(gpadc->dev);
-
-	pm_runtime_put_noidle(gpadc->dev);
-
-	return 0;
-}
-
-static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
-	SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
-			   ab8500_gpadc_runtime_resume,
-			   NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend,
-				ab8500_gpadc_resume)
-
-};
-
-static struct platform_driver ab8500_gpadc_driver = {
-	.probe = ab8500_gpadc_probe,
-	.remove = ab8500_gpadc_remove,
-	.driver = {
-		.name = "ab8500-gpadc",
-		.pm = &ab8500_gpadc_pm_ops,
-	},
-};
-
-static int __init ab8500_gpadc_init(void)
-{
-	return platform_driver_register(&ab8500_gpadc_driver);
-}
-subsys_initcall_sync(ab8500_gpadc_init);
-
-/**
- * ab8540_gpadc_get_otp() - returns OTP values
- *
- */
-void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
-			u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
-			u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h)
-{
-	*vmain_l = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo;
-	*vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi;
-	*btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo;
-	*btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi;
-	*vbat_l  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
-	*vbat_h  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
-	*ibat_l  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
-	*ibat_h  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
-}
diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h
deleted file mode 100644
index 836c944abe2e..000000000000
--- a/include/linux/mfd/abx500/ab8500-gpadc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 ST-Ericsson SA
- *
- * Author: Arun R Murthy <arun.murthy@stericsson.com>
- * Author: Daniel Willerud <daniel.willerud@stericsson.com>
- * Author: M'boumba Cedric Madianga <cedric.madianga@stericsson.com>
- */
-
-#ifndef	_AB8500_GPADC_H
-#define _AB8500_GPADC_H
-
-/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2
- * and ADCHwSel[4:0] in GPADCCtrl3 ) */
-#define BAT_CTRL		0x01
-#define BTEMP_BALL		0x02
-#define MAIN_CHARGER_V		0x03
-#define ACC_DETECT1		0x04
-#define ACC_DETECT2		0x05
-#define ADC_AUX1		0x06
-#define ADC_AUX2		0x07
-#define MAIN_BAT_V		0x08
-#define VBUS_V			0x09
-#define MAIN_CHARGER_C		0x0A
-#define USB_CHARGER_C		0x0B
-#define BK_BAT_V		0x0C
-#define DIE_TEMP		0x0D
-#define USB_ID			0x0E
-#define XTAL_TEMP		0x12
-#define VBAT_TRUE_MEAS		0x13
-#define BAT_CTRL_AND_IBAT	0x1C
-#define VBAT_MEAS_AND_IBAT	0x1D
-#define VBAT_TRUE_MEAS_AND_IBAT	0x1E
-#define BAT_TEMP_AND_IBAT	0x1F
-
-/* Virtual channel used only for ibat convertion to ampere
- * Battery current conversion (ibat) cannot be requested as a single conversion
- *  but it is always in combination with other input requests
- */
-#define IBAT_VIRTUAL_CHANNEL		0xFF
-
-#define SAMPLE_1        1
-#define SAMPLE_4        4
-#define SAMPLE_8        8
-#define SAMPLE_16       16
-#define RISING_EDGE     0
-#define FALLING_EDGE    1
-
-/* Arbitrary ADC conversion type constants */
-#define ADC_SW				0
-#define ADC_HW				1
-
-struct ab8500_gpadc;
-
-struct ab8500_gpadc *ab8500_gpadc_get(char *name);
-int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
-static inline int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
-{
-	return ab8500_gpadc_sw_hw_convert(gpadc, channel,
-			SAMPLE_16, 0, 0, ADC_SW);
-}
-
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type);
-int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
-		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
-		int *ibat);
-int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
-		u8 channel, int ad_value);
-void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
-			u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
-			u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h);
-
-#endif /* _AB8500_GPADC_H */
