| Message ID | 20191013091859.25344d8f@archlinux (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PULL,v3] First set of iio new device support etc for the 5.5 cycle | expand |
On Sun, Oct 13, 2019 at 09:18:59AM +0100, Jonathan Cameron wrote: > The following changes since commit b73b93a2af3392b9b7b8ba7e818ee767499f9655: > > iio: adc: ad7192: Add sysfs ABI documentation (2019-09-08 10:34:49 +0100) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.5a-take3 Much better, thanks! Now pulled and pushed out. greg k-h
The following changes since commit b73b93a2af3392b9b7b8ba7e818ee767499f9655: iio: adc: ad7192: Add sysfs ABI documentation (2019-09-08 10:34:49 +0100) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.5a-take3 for you to fetch changes up to a521d52d1eb20265e830d155ff684453ea229c86: iio: pressure: bmp280: remove stray newline (2019-10-13 08:53:35 +0100) ---------------------------------------------------------------- First set of IIO new device support, cleanups and features for the 5.5 cycle Third version with the adis rework set dropped as better to just have a fresh version of that at some future date. The usual mixed backs of new device support being added to drivers, long term reworks continuing and little per driver cleanups and features. Also a few trivial counter subsystem tidy ups on behalf of William. Core new feature * Device label support. A long requested feature no one got around to implementing before. Allows DT based provision of a 'label' that identifies a device uniquely within a system. This differs from existing 'name' which is meant to be the part number. New device support * ingenic-adc - Support for the JZ4770 SoC ADC including bindings. * inv_mpu6050 - Add support for magnetometer in MPU925x parts. Fiddly to do as this is actually a separate device sitting inside the package, but with the master device being able to schedule reads etc. Will only run if the auxiliary bus is not in use for any other devices. Features * ad7192 - Userspace calibration controls to do zero and full scale. * st_lsm6dsx - Enable latched interrupts by default for sensors events with related clear. - Motion events and related wakeup source. This needed quite a bit of refactoring as well. Cleanups and minor features * ad7192 - sysfs ABI docs * ad7949 - Remove code to readback configuration word as driver never actually enabled it. - Fix incorrect xfer length. Not actually known to cause problems other than wasted bus usage. * adis16080 - Replace core mlock usage with local lock with more appropriate scope. * adis16130 - Remove pointless mlock usage. * adis16240 - Remove include of gpio.h as no gpio usage. * atlas-ph-sensor - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * bh1750 - Fix up a static compiler warning and make the code more readable. - yaml conversion of binding + MAINTAINERS entry. * bmp280 - Drop a stray newline. * cm36651 - Drop a redundant assignment * itg3200 - Alignment cleanup. * max31856 - Add missing of_node and parent references, useful to identify the device. * sc27xx_adc - Use devm_hwspin_lock_request_specific rather than local rolled version. * stm32-lptimer counter - kernel-doc warning. * stm32-timer counter - kernel-doc warning. - Alignment cleanup. * sx9500 - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * tcs3414 - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. ---------------------------------------------------------------- Alexandru Ardelean (5): iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions iio: gyro: adis16130: remove mlock usage iio: gyro: adis16080: replace mlock with own lock iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position Andrea Merello (3): iio: ad7949: kill pointless "readback"-handling code iio: max31856: add missing of_node and parent references to iio_dev iio: ad7949: fix incorrect SPI xfer len Artur Rojek (3): dt-bindings: iio/adc: Add a compatible string for JZ4770 SoC ADC dt-bindings: iio/adc: Add AUX2 channel idx for JZ4770 SoC ADC IIO: Ingenic JZ47xx: Add support for JZ4770 SoC ADC. Baolin Wang (1): iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code Bartosz Golaszewski (1): iio: pressure: bmp280: remove stray newline Colin Ian King (3): iio: light: cm36651: redundant assignment to variable ret counter: stm32: clean up indentation issue iio: gyro: clean up indentation issue Fabrice Gasnier (2): counter: stm32-timer-cnt: fix a kernel-doc warning counter: stm32-lptimer-cnt: fix a kernel-doc warning Jean-Baptiste Maneyrol (7): iio: imu: inv_mpu6050: disable i2c mux for MPU925x iio: imu: inv_mpu6050: add header include protection macro iio: imu: inv_mpu6050: add defines for supporting 9-axis chips iio: imu: inv_mpu6050: fix objects syntax in Makefile iio: imu: inv_mpu6050: helpers for using i2c master on auxiliary bus iio: imu: inv_mpu6050: add MPU925x magnetometer support iio: imu: inv_mpu6050: add fifo support for magnetometer data Krzysztof Wilczynski (1): iio: light: bh1750: Resolve compiler warning and make code more readable Lorenzo Bianconi (2): iio: imu: st_lsm6dsx: enable LIR for sensor events iio: imu: st_lsm6dsx: enable clear on read for latched interrupts Mircea Caprioru (2): iio: adc: ad_sigma_delta: Export ad_sd_calibrate staging: iio: adc: ad7192: Add system calibration support Phil Reid (2): dt-binding: iio: Add optional label property iio: core: Add optional symbolic label to device attributes Rohit Sarkar (1): staging: iio: ADIS16240: Remove unused include Sean Nyekjaer (5): iio: imu: st_lsm6dsx: move interrupt thread to core iio: imu: st_lsm6dsx: add motion events iio: imu: st_lsm6dsx: add wakeup-source option iio: imu: st_lsm6dsx: always enter interrupt thread iio: imu: st_lsm6dsx: add motion report function and call from interrupt Tomasz Duszynski (2): dt-bindings: iio: light: bh1750: convert bindings to yaml MAINTAINERS: add entry for ROHM BH1750 driver Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 | 24 ++ .../devicetree/bindings/iio/adc/ingenic,adc.txt | 1 + .../devicetree/bindings/iio/iio-bindings.txt | 5 + .../devicetree/bindings/iio/light/bh1750.txt | 18 - .../devicetree/bindings/iio/light/bh1750.yaml | 43 ++ MAINTAINERS | 6 + drivers/counter/stm32-lptimer-cnt.c | 2 +- drivers/counter/stm32-timer-cnt.c | 6 +- drivers/iio/adc/ad7949.c | 33 +- drivers/iio/adc/ad_sigma_delta.c | 3 +- drivers/iio/adc/ingenic-adc.c | 149 +++++-- drivers/iio/adc/sc27xx_adc.c | 16 +- drivers/iio/chemical/atlas-ph-sensor.c | 8 +- drivers/iio/gyro/adis16080.c | 8 +- drivers/iio/gyro/adis16130.c | 2 - drivers/iio/gyro/itg3200_core.c | 2 +- drivers/iio/imu/inv_mpu6050/Makefile | 7 +- drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c | 204 ++++++++++ drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h | 19 + drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 152 +++++++- drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 60 ++- drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 70 +++- drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c | 356 +++++++++++++++++ drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h | 36 ++ drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 11 +- drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 86 +++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 50 +++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 78 +--- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 434 ++++++++++++++++++++- drivers/iio/industrialio-core.c | 17 + drivers/iio/light/bh1750.c | 4 +- drivers/iio/light/cm36651.c | 2 +- drivers/iio/light/tcs3414.c | 30 +- drivers/iio/pressure/bmp280-core.c | 1 - drivers/iio/proximity/sx9500.c | 16 +- drivers/iio/temperature/max31856.c | 2 + drivers/staging/iio/accel/adis16240.c | 1 - drivers/staging/iio/adc/ad7192.c | 79 +++- include/dt-bindings/iio/adc/ingenic,adc.h | 1 + include/linux/iio/adc/ad_sigma_delta.h | 2 + include/linux/iio/iio.h | 2 + 41 files changed, 1817 insertions(+), 229 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/light/bh1750.txt create mode 100644 Documentation/devicetree/bindings/iio/light/bh1750.yaml create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h