| Message ID | 20191115140622.6429-2-jmaneyrol@invensense.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add MPU9150 magnetometer support | expand |
On Fri, 15 Nov 2019 15:06:21 +0100 Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> wrote: > MPU9150 is i2c only. > Update Kconfig to delete in description chips that are i2c or > spi only. > > Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Good to clean this up. Applied to the togreg branch of iio.git and pushed out as testing to be ignored (hopefully) > --- > drivers/iio/imu/inv_mpu6050/Kconfig | 6 +++--- > drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 1 - > 2 files changed, 3 insertions(+), 4 deletions(-) > > diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig > index e4c4c12236a7..963a0cafe0cb 100644 > --- a/drivers/iio/imu/inv_mpu6050/Kconfig > +++ b/drivers/iio/imu/inv_mpu6050/Kconfig > @@ -14,7 +14,7 @@ config INV_MPU6050_I2C > select INV_MPU6050_IIO > select REGMAP_I2C > help > - This driver supports the Invensense MPU6000/6050/6500/6515, > + This driver supports the Invensense MPU6050/6500/6515, > MPU9150/9250/9255 and ICM20608/20602 motion tracking devices > over I2C. > This driver can be built as a module. The module will be called > @@ -26,8 +26,8 @@ config INV_MPU6050_SPI > select INV_MPU6050_IIO > select REGMAP_SPI > help > - This driver supports the Invensense MPU6000/6050/6500/6515, > - MPU9150/9250/9255 and ICM20608/20602 motion tracking devices > + This driver supports the Invensense MPU6000/6500/6515, > + MPU9250/9255 and ICM20608/20602 motion tracking devices > over SPI. > This driver can be built as a module. The module will be called > inv-mpu6050-spi. > diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c > index 142692fc0758..ec102d5a5c77 100644 > --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c > +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c > @@ -74,7 +74,6 @@ static int inv_mpu_probe(struct spi_device *spi) > static const struct spi_device_id inv_mpu_id[] = { > {"mpu6000", INV_MPU6000}, > {"mpu6500", INV_MPU6500}, > - {"mpu9150", INV_MPU9150}, > {"mpu9250", INV_MPU9250}, > {"mpu9255", INV_MPU9255}, > {"icm20608", INV_ICM20608},
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index e4c4c12236a7..963a0cafe0cb 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -14,7 +14,7 @@ config INV_MPU6050_I2C select INV_MPU6050_IIO select REGMAP_I2C help - This driver supports the Invensense MPU6000/6050/6500/6515, + This driver supports the Invensense MPU6050/6500/6515, MPU9150/9250/9255 and ICM20608/20602 motion tracking devices over I2C. This driver can be built as a module. The module will be called @@ -26,8 +26,8 @@ config INV_MPU6050_SPI select INV_MPU6050_IIO select REGMAP_SPI help - This driver supports the Invensense MPU6000/6050/6500/6515, - MPU9150/9250/9255 and ICM20608/20602 motion tracking devices + This driver supports the Invensense MPU6000/6500/6515, + MPU9250/9255 and ICM20608/20602 motion tracking devices over SPI. This driver can be built as a module. The module will be called inv-mpu6050-spi. diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c index 142692fc0758..ec102d5a5c77 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -74,7 +74,6 @@ static int inv_mpu_probe(struct spi_device *spi) static const struct spi_device_id inv_mpu_id[] = { {"mpu6000", INV_MPU6000}, {"mpu6500", INV_MPU6500}, - {"mpu9150", INV_MPU9150}, {"mpu9250", INV_MPU9250}, {"mpu9255", INV_MPU9255}, {"icm20608", INV_ICM20608},
MPU9150 is i2c only. Update Kconfig to delete in description chips that are i2c or spi only. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> --- drivers/iio/imu/inv_mpu6050/Kconfig | 6 +++--- drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 1 - 2 files changed, 3 insertions(+), 4 deletions(-)