| Message ID | 20200211191201.1049902-2-david@ixit.cz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: light: AL3010 introduction | expand |
On Tue, 11 Feb 2020 20:11:55 +0100 David Heidelberg <david@ixit.cz> wrote: > This commit add dt-bindings support to al3320a driver and vendor-prefix > dynaimage. > Partly based on unmerged commit: > "iio: Add Dyna-Image AP3223 ambient light and proximity driver" > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > v5 > - drop requirement on interrups and vdd-supply > - s/al3320a@1c/light-sensor@1c/ > - dual license also under BSD > > .../bindings/iio/light/al3320a.yaml | 43 +++++++++++++++++++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > 2 files changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/al3320a.yaml > > diff --git a/Documentation/devicetree/bindings/iio/light/al3320a.yaml b/Documentation/devicetree/bindings/iio/light/al3320a.yaml > new file mode 100644 > index 000000000000..cdc8d98d114c > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/al3320a.yaml I missed this previously but it's preferred for the filename to include the manufacturer bit. I'll fix up including the reference to the filename below. Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Ideally I'd like to add a DT reviewed by, but I think you've addressed all the previous comments. Thanks, Jonathan > @@ -0,0 +1,43 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/light/al3320a.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Dyna-Image AL3320A sensor > + > +maintainers: > + - David Heidelberg <david@ixit.cz> > + > +properties: > + compatible: > + const: dynaimage,al3320a > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + vdd-supply: > + description: Regulator that provides power to the sensor > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + light-sensor@1c { > + compatible = "dynaimage,al3320a"; > + reg = <0x1c>; > + vdd-supply = <&vdd_reg>; > + interrupts = <0 99 4>; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml > index 9cd52d9e1f7f..8d2ebf3d0aa1 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml > +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml > @@ -267,6 +267,8 @@ patternProperties: > description: Dragino Technology Co., Limited > "^dserve,.*": > description: dServe Technology B.V. > + "^dynaimage,.*": > + description: Dyna-Image > "^ea,.*": > description: Embedded Artists AB > "^ebs-systart,.*":
On Tue, 11 Feb 2020 20:11:55 +0100, David Heidelberg wrote: > This commit add dt-bindings support to al3320a driver and vendor-prefix > dynaimage. > Partly based on unmerged commit: > "iio: Add Dyna-Image AP3223 ambient light and proximity driver" > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > v5 > - drop requirement on interrups and vdd-supply > - s/al3320a@1c/light-sensor@1c/ > - dual license also under BSD > > .../bindings/iio/light/al3320a.yaml | 43 +++++++++++++++++++ > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > 2 files changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/al3320a.yaml > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/iio/light/al3320a.yaml b/Documentation/devicetree/bindings/iio/light/al3320a.yaml new file mode 100644 index 000000000000..cdc8d98d114c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/al3320a.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/al3320a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dyna-Image AL3320A sensor + +maintainers: + - David Heidelberg <david@ixit.cz> + +properties: + compatible: + const: dynaimage,al3320a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@1c { + compatible = "dynaimage,al3320a"; + reg = <0x1c>; + vdd-supply = <&vdd_reg>; + interrupts = <0 99 4>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9cd52d9e1f7f..8d2ebf3d0aa1 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -267,6 +267,8 @@ patternProperties: description: Dragino Technology Co., Limited "^dserve,.*": description: dServe Technology B.V. + "^dynaimage,.*": + description: Dyna-Image "^ea,.*": description: Embedded Artists AB "^ebs-systart,.*":
This commit add dt-bindings support to al3320a driver and vendor-prefix dynaimage. Partly based on unmerged commit: "iio: Add Dyna-Image AP3223 ambient light and proximity driver" Signed-off-by: David Heidelberg <david@ixit.cz> --- v5 - drop requirement on interrups and vdd-supply - s/al3320a@1c/light-sensor@1c/ - dual license also under BSD .../bindings/iio/light/al3320a.yaml | 43 +++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + 2 files changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/al3320a.yaml