diff mbox series

[v1,5/5] iio: st_sensors: Join string literals back

Message ID 20200312121938.45608-5-andriy.shevchenko@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series [v1,1/5] iio: light: st_uvis25: Drop unneeded casting when print error code | expand

Commit Message

Andy Shevchenko March 12, 2020, 12:19 p.m. UTC 
For easy grepping on debug purposes join string literals back in
the messages.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/common/st_sensors/st_sensors_core.c    |  3 +--
 drivers/iio/common/st_sensors/st_sensors_trigger.c | 13 ++++---------
 2 files changed, 5 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index e051edbc43c1..8ee9bd2a9d8d 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -278,8 +278,7 @@  static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 	    !sdata->sensor_settings->drdy_irq.int2.addr) {
 		if (pdata->drdy_int_pin)
 			dev_info(&indio_dev->dev,
-				 "DRDY on pin INT%d specified, but sensor "
-				 "does not support interrupts\n",
+				 "DRDY on pin INT%d specified, but sensor does not support interrupts\n",
 				 pdata->drdy_int_pin);
 		return 0;
 	}
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index e817537cdfb5..0507283bd4c1 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -44,8 +44,7 @@  static int st_sensors_new_samples_available(struct iio_dev *indio_dev,
 			  sdata->sensor_settings->drdy_irq.stat_drdy.addr,
 			  &status);
 	if (ret < 0) {
-		dev_err(sdata->dev,
-			"error checking samples available\n");
+		dev_err(sdata->dev, "error checking samples available\n");
 		return ret;
 	}
 
@@ -148,9 +147,7 @@  int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 	case IRQF_TRIGGER_LOW:
 		if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
 			dev_err(&indio_dev->dev,
-				"falling/low specified for IRQ "
-				"but hardware supports only rising/high: "
-				"will request rising/high\n");
+				"falling/low specified for IRQ but hardware supports only rising/high: will request rising/high\n");
 			if (irq_trig == IRQF_TRIGGER_FALLING)
 				irq_trig = IRQF_TRIGGER_RISING;
 			if (irq_trig == IRQF_TRIGGER_LOW)
@@ -163,8 +160,7 @@  int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 			if (err < 0)
 				goto iio_trigger_free;
 			dev_info(&indio_dev->dev,
-				 "interrupts on the falling edge or "
-				 "active low level\n");
+				 "interrupts on the falling edge or active low level\n");
 		}
 		break;
 	case IRQF_TRIGGER_RISING:
@@ -178,8 +174,7 @@  int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 	default:
 		/* This is the most preferred mode, if possible */
 		dev_err(&indio_dev->dev,
-			"unsupported IRQ trigger specified (%lx), enforce "
-			"rising edge\n", irq_trig);
+			"unsupported IRQ trigger specified (%lx), enforce rising edge\n", irq_trig);
 		irq_trig = IRQF_TRIGGER_RISING;
 	}