| Message ID | 20200717165538.3275050-29-lee.jones@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Second batch of W=1 fixes for IIO | expand |
On Fri, 17 Jul 2020 17:55:36 +0100 Lee Jones <lee.jones@linaro.org> wrote: > No attempt has been made to document any of the demoted functions here. > > Fixes the following W=1 kernel build warning(s): > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'hw' not described in 'st_lsm6dsx_shub_read_output' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_read_output' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_read_output' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'hw' not described in 'st_lsm6dsx_shub_write_reg' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_write_reg' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_write_reg' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_write_reg' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'sensor' not described in 'st_lsm6dsx_shub_read' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_read' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_read' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_read' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'sensor' not described in 'st_lsm6dsx_shub_write' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_write' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_write' > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_write' > > Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> > Signed-off-by: Lee Jones <lee.jones@linaro.org> Applied. Thanks, Jonathan > --- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c > index c1f83fe0d8dad..9a14dde4795da 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c > @@ -163,7 +163,7 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw) > msleep((2000000U / odr) + 1); > } > > -/** > +/* > * st_lsm6dsx_shub_read_output - read i2c controller register > * > * Read st_lsm6dsx i2c controller register > @@ -195,7 +195,7 @@ st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data, > return err; > } > > -/** > +/* > * st_lsm6dsx_shub_write_reg - write i2c controller register > * > * Write st_lsm6dsx i2c controller register > @@ -273,7 +273,7 @@ static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor, > return err; > } > > -/** > +/* > * st_lsm6dsx_shub_read - read data from slave device register > * > * Read data from slave device register. SLV0 is used for > @@ -323,7 +323,7 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr, > sizeof(config)); > } > > -/** > +/* > * st_lsm6dsx_shub_write - write data to slave device register > * > * Write data from slave device register. SLV0 is used for
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c index c1f83fe0d8dad..9a14dde4795da 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c @@ -163,7 +163,7 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw) msleep((2000000U / odr) + 1); } -/** +/* * st_lsm6dsx_shub_read_output - read i2c controller register * * Read st_lsm6dsx i2c controller register @@ -195,7 +195,7 @@ st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data, return err; } -/** +/* * st_lsm6dsx_shub_write_reg - write i2c controller register * * Write st_lsm6dsx i2c controller register @@ -273,7 +273,7 @@ static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor, return err; } -/** +/* * st_lsm6dsx_shub_read - read data from slave device register * * Read data from slave device register. SLV0 is used for @@ -323,7 +323,7 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr, sizeof(config)); } -/** +/* * st_lsm6dsx_shub_write - write data to slave device register * * Write data from slave device register. SLV0 is used for
No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'hw' not described in 'st_lsm6dsx_shub_read_output' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_read_output' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:174: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_read_output' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'hw' not described in 'st_lsm6dsx_shub_write_reg' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_write_reg' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_write_reg' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:205: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_write_reg' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'sensor' not described in 'st_lsm6dsx_shub_read' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_read' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_read' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:285: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_read' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'sensor' not described in 'st_lsm6dsx_shub_write' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'addr' not described in 'st_lsm6dsx_shub_write' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'data' not described in 'st_lsm6dsx_shub_write' drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c:335: warning: Function parameter or member 'len' not described in 'st_lsm6dsx_shub_write' Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)