@@ -1214,12 +1214,11 @@ int adxl372_probe(struct device *dev, struct regmap *regmap,
ret = devm_iio_triggered_buffer_setup(dev,
indio_dev, NULL,
adxl372_trigger_handler,
- &adxl372_buffer_ops, NULL);
+ &adxl372_buffer_ops,
+ adxl372_fifo_attributes);
if (ret < 0)
return ret;
- iio_buffer_set_attrs(indio_dev->buffer, adxl372_fifo_attributes);
-
if (st->irq) {
st->dready_trig = devm_iio_trigger_alloc(dev,
"%s-dev%d",
@@ -1558,6 +1558,7 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
const char *name, bool block_supported)
{
+ const struct attribute **fifo_attrs;
struct bmc150_accel_data *data;
struct iio_dev *indio_dev;
int ret;
@@ -1590,10 +1591,19 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &bmc150_accel_info;
+ if (block_supported) {
+ indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
+ indio_dev->info = &bmc150_accel_info_fifo;
+ fifo_attrs = bmc150_accel_fifo_attributes;
+ } else {
+ fifo_attrs = NULL;
+ }
+
ret = iio_triggered_buffer_setup(indio_dev,
&iio_pollfunc_store_time,
bmc150_accel_trigger_handler,
- &bmc150_accel_buffer_ops, NULL);
+ &bmc150_accel_buffer_ops,
+ fifo_attrs);
if (ret < 0) {
dev_err(dev, "Failed: iio triggered buffer setup\n");
return ret;
@@ -1628,13 +1638,6 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
ret = bmc150_accel_triggers_setup(indio_dev, data);
if (ret)
goto err_buffer_cleanup;
-
- if (block_supported) {
- indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
- indio_dev->info = &bmc150_accel_info_fifo;
- iio_buffer_set_attrs(indio_dev->buffer,
- bmc150_accel_fifo_attributes);
- }
}
ret = pm_runtime_set_active(dev);
@@ -1156,13 +1156,6 @@ static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
return IRQ_HANDLED;
}
-static int at91_adc_buffer_init(struct iio_dev *indio)
-{
- return devm_iio_triggered_buffer_setup(&indio->dev, indio,
- &iio_pollfunc_store_time,
- &at91_adc_trigger_handler, &at91_buffer_setup_ops, NULL);
-}
-
static unsigned at91_adc_startup_time(unsigned startup_time_min,
unsigned adc_clk_khz)
{
@@ -1683,6 +1676,21 @@ static const struct iio_info at91_adc_info = {
.hwfifo_set_watermark = &at91_adc_set_watermark,
};
+static int at91_adc_buffer_init(struct iio_dev *indio)
+{
+ const struct attribute **fifo_attrs;
+ struct at91_adc_state *st = iio_priv(indio);
+
+ if (st->selected_trig->hw_trig)
+ fifo_attrs = at91_adc_fifo_attributes;
+ else
+ fifo_attrs = NULL;
+
+ return devm_iio_triggered_buffer_setup(&indio->dev, indio,
+ &iio_pollfunc_store_time,
+ &at91_adc_trigger_handler, &at91_buffer_setup_ops, fifo_attrs);
+}
+
static int at91_adc_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
@@ -1835,9 +1843,6 @@ static int at91_adc_probe(struct platform_device *pdev)
* a watermark of 1
*/
st->dma_st.watermark = 1;
-
- iio_buffer_set_attrs(indio_dev->buffer,
- at91_adc_fifo_attributes);
}
if (dma_coerce_mask_and_coherent(&indio_dev->dev, DMA_BIT_MASK(32)))
@@ -9,6 +9,7 @@
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
+#include <linux/iio/buffer_impl.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
@@ -69,7 +70,7 @@ int iio_triggered_buffer_setup(struct iio_dev *indio_dev,
/* Flag that polled ring buffering is possible */
indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
- iio_buffer_set_attrs(buffer, buffer_attrs);
+ buffer->attrs = buffer_attrs;
return 0;
@@ -353,19 +353,22 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
if (ret)
return ret;
} else {
+ const struct attribute **fifo_attrs;
+
+ if (has_hw_fifo)
+ fifo_attrs = cros_ec_sensor_fifo_attributes;
+ else
+ fifo_attrs = NULL;
+
/*
* The only way to get samples in buffer is to set a
* software trigger (systrig, hrtimer).
*/
ret = devm_iio_triggered_buffer_setup(
dev, indio_dev, NULL, trigger_capture,
- NULL, NULL);
+ NULL, fifo_attrs);
if (ret)
return ret;
-
- if (has_hw_fifo)
- iio_buffer_set_attrs(indio_dev->buffer,
- cros_ec_sensor_fifo_attributes);
}
}
@@ -84,15 +84,6 @@ static const struct attribute *hid_sensor_fifo_attributes[] = {
NULL,
};
-static void hid_sensor_setup_batch_mode(struct iio_dev *indio_dev,
- struct hid_sensor_common *st)
-{
- if (!hid_sensor_batch_mode_supported(st))
- return;
-
- iio_buffer_set_attrs(indio_dev->buffer, hid_sensor_fifo_attributes);
-}
-
static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
{
int state_val;
@@ -247,11 +238,17 @@ static const struct iio_trigger_ops hid_sensor_trigger_ops = {
int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
struct hid_sensor_common *attrb)
{
+ const struct attribute **fifo_attrs;
int ret;
struct iio_trigger *trig;
+ if (hid_sensor_batch_mode_supported(attrb))
+ fifo_attrs = hid_sensor_fifo_attributes;
+ else
+ fifo_attrs = NULL;
+
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
- NULL, NULL, NULL);
+ NULL, NULL, fifo_attrs);
if (ret) {
dev_err(&indio_dev->dev, "Triggered Buffer Setup Failed\n");
return ret;
@@ -276,8 +273,6 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
attrb->trigger = trig;
indio_dev->trig = iio_trigger_get(trig);
- hid_sensor_setup_batch_mode(indio_dev, attrb);
-
ret = pm_runtime_set_active(&indio_dev->dev);
if (ret)
goto error_unreg_trigger;
@@ -210,18 +210,6 @@ void iio_buffer_init(struct iio_buffer *buffer)
}
EXPORT_SYMBOL(iio_buffer_init);
-/**
- * iio_buffer_set_attrs - Set buffer specific attributes
- * @buffer: The buffer for which we are setting attributes
- * @attrs: Pointer to a null terminated list of pointers to attributes
- */
-void iio_buffer_set_attrs(struct iio_buffer *buffer,
- const struct attribute **attrs)
-{
- buffer->attrs = attrs;
-}
-EXPORT_SYMBOL_GPL(iio_buffer_set_attrs);
-
static ssize_t iio_show_scan_index(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -11,9 +11,6 @@
struct iio_buffer;
-void iio_buffer_set_attrs(struct iio_buffer *buffer,
- const struct attribute **attrs);
-
int iio_push_to_buffers(struct iio_dev *indio_dev, const void *data);
/**
The iio_buffer_set_attrs() function needn't necessarily be removed, but rather hidden inside IIO core.[1] However, if doing that, then it's almost no reason not to remove it. This change moves the HW FIFO buffer attributes as a parameter of {devm_}iio_triggered_buffer_setup(). This makes it clear to which IIO buffer these attributes are bound to. One minor downside (also related to point [1]) is that 'linux/iio/buffer_impl.h' needs to be included in 'industrialio-triggered-buffer.c' to be able to access the 'attrs' field of the buffer. This is also because there is no clear place where to place iio_buffer_set_attrs() inside IIO core. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> --- drivers/iio/accel/adxl372.c | 5 ++-- drivers/iio/accel/bmc150-accel-core.c | 19 ++++++++------ drivers/iio/adc/at91-sama5d2_adc.c | 25 +++++++++++-------- .../buffer/industrialio-triggered-buffer.c | 3 ++- .../cros_ec_sensors/cros_ec_sensors_core.c | 13 ++++++---- .../common/hid-sensors/hid-sensor-trigger.c | 19 ++++++-------- drivers/iio/industrialio-buffer.c | 12 --------- include/linux/iio/buffer.h | 3 --- 8 files changed, 45 insertions(+), 54 deletions(-)