| Message ID | 20201011170749.243680-9-jic23@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings:iio: Another set of yaml conversions. | expand |
On Sun, Oct 11, 2020 at 12:10 PM Jonathan Cameron <jic23@kernel.org> wrote: > > From: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > One quirk in the txt file was that the xclr gpio was specified as > gpio-xclr rather than gpios-xclr. I've fixed that in the xclr-gpios?, not gpios?-xclr > yaml version. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Cc: Marek Vasut <marex@denx.de> > --- > .../bindings/iio/pressure/hoperf,hp03.yaml | 47 +++++++++++++++++++ > .../devicetree/bindings/iio/pressure/hp03.txt | 17 ------- > 2 files changed, 47 insertions(+), 17 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml > new file mode 100644 > index 000000000000..69a3759e23db > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml > @@ -0,0 +1,47 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: HopeRF HP03 digital pressure/temperature sensors > + > +maintainers: > + - Marek Vasut <marex@denx.de> > + > +description: | > + Digital pressure and temperature sensor with an I2C interface. > + > +properties: > + compatible: > + const: hoperf,hp03 > + > + reg: > + maxItems: 1 > + > + xclr-gpios: > + description: > + The XCLR pin is a reset of the ADC in the chip, it must be pulled > + HI before the conversion and readout of the value from the ADC > + registers and pulled LO afterward. > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pressure@77 { > + compatible = "hoperf,hp03"; > + reg = <0x77>; > + xclr-gpios = <&portc 0 0x0>; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt > deleted file mode 100644 > index 831dbee7a5c3..000000000000 > --- a/Documentation/devicetree/bindings/iio/pressure/hp03.txt > +++ /dev/null > @@ -1,17 +0,0 @@ > -HopeRF HP03 digital pressure/temperature sensors > - > -Required properties: > -- compatible: must be "hoperf,hp03" > -- xclr-gpio: must be device tree identifier of the XCLR pin. > - The XCLR pin is a reset of the ADC in the chip, > - it must be pulled HI before the conversion and > - readout of the value from the ADC registers and > - pulled LO afterward. > - > -Example: > - > -hp03@77 { > - compatible = "hoperf,hp03"; > - reg = <0x77>; > - xclr-gpio = <&portc 0 0x0>; > -}; > -- > 2.28.0 >
On Mon, 12 Oct 2020 08:06:46 -0500 Rob Herring <robh+dt@kernel.org> wrote: > On Sun, Oct 11, 2020 at 12:10 PM Jonathan Cameron <jic23@kernel.org> wrote: > > > > From: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > > One quirk in the txt file was that the xclr gpio was specified as > > gpio-xclr rather than gpios-xclr. I've fixed that in the > > xclr-gpios?, not gpios?-xclr I clearly have a very short memory when writing patch descriptions. Indeed, xclr-gpios is what this should say. > > > yaml version. > > > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > Cc: Marek Vasut <marex@denx.de> > > --- > > .../bindings/iio/pressure/hoperf,hp03.yaml | 47 +++++++++++++++++++ > > .../devicetree/bindings/iio/pressure/hp03.txt | 17 ------- > > 2 files changed, 47 insertions(+), 17 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml > > new file mode 100644 > > index 000000000000..69a3759e23db > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml > > @@ -0,0 +1,47 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: HopeRF HP03 digital pressure/temperature sensors > > + > > +maintainers: > > + - Marek Vasut <marex@denx.de> > > + > > +description: | > > + Digital pressure and temperature sensor with an I2C interface. > > + > > +properties: > > + compatible: > > + const: hoperf,hp03 > > + > > + reg: > > + maxItems: 1 > > + > > + xclr-gpios: > > + description: > > + The XCLR pin is a reset of the ADC in the chip, it must be pulled > > + HI before the conversion and readout of the value from the ADC > > + registers and pulled LO afterward. > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + pressure@77 { > > + compatible = "hoperf,hp03"; > > + reg = <0x77>; > > + xclr-gpios = <&portc 0 0x0>; > > + }; > > + }; > > +... > > diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt > > deleted file mode 100644 > > index 831dbee7a5c3..000000000000 > > --- a/Documentation/devicetree/bindings/iio/pressure/hp03.txt > > +++ /dev/null > > @@ -1,17 +0,0 @@ > > -HopeRF HP03 digital pressure/temperature sensors > > - > > -Required properties: > > -- compatible: must be "hoperf,hp03" > > -- xclr-gpio: must be device tree identifier of the XCLR pin. > > - The XCLR pin is a reset of the ADC in the chip, > > - it must be pulled HI before the conversion and > > - readout of the value from the ADC registers and > > - pulled LO afterward. > > - > > -Example: > > - > > -hp03@77 { > > - compatible = "hoperf,hp03"; > > - reg = <0x77>; > > - xclr-gpio = <&portc 0 0x0>; > > -}; > > -- > > 2.28.0 > >
diff --git a/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml new file mode 100644 index 000000000000..69a3759e23db --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HopeRF HP03 digital pressure/temperature sensors + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + Digital pressure and temperature sensor with an I2C interface. + +properties: + compatible: + const: hoperf,hp03 + + reg: + maxItems: 1 + + xclr-gpios: + description: + The XCLR pin is a reset of the ADC in the chip, it must be pulled + HI before the conversion and readout of the value from the ADC + registers and pulled LO afterward. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@77 { + compatible = "hoperf,hp03"; + reg = <0x77>; + xclr-gpios = <&portc 0 0x0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt deleted file mode 100644 index 831dbee7a5c3..000000000000 --- a/Documentation/devicetree/bindings/iio/pressure/hp03.txt +++ /dev/null @@ -1,17 +0,0 @@ -HopeRF HP03 digital pressure/temperature sensors - -Required properties: -- compatible: must be "hoperf,hp03" -- xclr-gpio: must be device tree identifier of the XCLR pin. - The XCLR pin is a reset of the ADC in the chip, - it must be pulled HI before the conversion and - readout of the value from the ADC registers and - pulled LO afterward. - -Example: - -hp03@77 { - compatible = "hoperf,hp03"; - reg = <0x77>; - xclr-gpio = <&portc 0 0x0>; -};