[20/46] dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor

Commit Message

Jonathan Cameron Oct. 31, 2020, 6:48 p.m. UTC

From: Jonathan Cameron <[e-mail]>

For the example, node name is uv-sensor because the standard option
of light-sensor seemed a little too generic for this.

This one could have just been moved to trivial-devices.yaml but for now
I have kept it as a separate doc.

Signed-off-by: Jonathan Cameron <[e-mail]>
Cc: Lorenzo Bianconi <[e-mail]>
---
 .../bindings/iio/light/st,uvis25.yaml         | 42 +++++++++++++++++++
 .../devicetree/bindings/iio/light/uvis25.txt  | 22 ----------
 2 files changed, 42 insertions(+), 22 deletions(-)

Patch

diff --git a/Documentation/devicetree/bindings/iio/light/st,uvis25.yaml b/Documentation/devicetree/bindings/iio/light/st,uvis25.yaml
new file mode 100644
index 000000000000..c86e5e1d135e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/st,uvis25.yaml
@@ -0,0 +1,42 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/st,uvis25.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST UVIS25 uv sensor
+
+maintainers:
+  - Lorenzo Bianconi <[e-mail]>
+
+properties:
+  compatible:
+    const: st,uvis25
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        uv-sensor@47 {
+            compatible = "st,uvis25";
+            reg = <0x47>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt
deleted file mode 100644
index 043c139d91e6..000000000000
--- a/Documentation/devicetree/bindings/iio/light/uvis25.txt
+++ /dev/null
@@ -1,22 +0,0 @@ 
-* ST UVIS25 uv sensor
-
-Required properties:
-- compatible: should be "st,uvis25"
-- reg: i2c address of the sensor / spi cs line
-
-Optional properties:
-- interrupts: interrupt mapping for IRQ. It should be configured with
-  flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
-  IRQ_TYPE_EDGE_FALLING.
-
-  Refer to interrupt-controller/interrupts.txt for generic interrupt
-  client node bindings.
-
-Example:
-
-uvis25@47 {
-	compatible = "st,uvis25";
-	reg = <0x47>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-};