| Message ID | 20201128173343.390165-3-jic23@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: yaml conversion of i2c-gate and IIO users | expand |
On Sat, 28 Nov 2020 17:33:42 +0000 Jonathan Cameron <jic23@kernel.org> wrote: > From: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > As Rob Herring suggested, this no long requires the explicit > i2c-gate binding, but instead just used i2c-controller.yaml > directly. > > 2 prior examples combinded into one as a single example can show > all of the binding elements as long as the right part is selected. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Reviewed-by: Rob Herring <robh@kernel.org> > Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> > Cc: Wolfram Sang <wsa@the-dreams.de> > Cc: Peter Rosin <peda@axentia.se> > Link: https://lore.kernel.org/r/20201031181801.742585-3-jic23@kernel.org Applied to the togreg branch of iio.git > --- > .../bindings/iio/imu/inv_mpu6050.txt | 67 ------------ > .../bindings/iio/imu/invensense,mpu6050.yaml | 103 ++++++++++++++++++ > 2 files changed, 103 insertions(+), 67 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt > deleted file mode 100644 > index f2f64749e818..000000000000 > --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt > +++ /dev/null > @@ -1,67 +0,0 @@ > -InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device > - > -http://www.invensense.com/mems/gyro/mpu6050.html > - > -Required properties: > - - compatible : should be one of > - "invensense,mpu6000" > - "invensense,mpu6050" > - "invensense,mpu6500" > - "invensense,mpu6515" > - "invensense,mpu9150" > - "invensense,mpu9250" > - "invensense,mpu9255" > - "invensense,icm20608" > - "invensense,icm20609" > - "invensense,icm20689" > - "invensense,icm20602" > - "invensense,icm20690" > - "invensense,iam20680" > - - reg : the I2C address of the sensor > - - interrupts: interrupt mapping for IRQ. It should be configured with flags > - IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or > - IRQ_TYPE_EDGE_FALLING. > - > - Refer to interrupt-controller/interrupts.txt for generic interrupt client node > - bindings. > - > -Optional properties: > - - vdd-supply: regulator phandle for VDD supply > - - vddio-supply: regulator phandle for VDDIO supply > - - mount-matrix: an optional 3x3 mounting rotation matrix > - - i2c-gate node. These devices also support an auxiliary i2c bus. This is > - simple enough to be described using the i2c-gate binding. See > - i2c/i2c-gate.txt for more details. > - > -Example: > - mpu6050@68 { > - compatible = "invensense,mpu6050"; > - reg = <0x68>; > - interrupt-parent = <&gpio1>; > - interrupts = <18 IRQ_TYPE_EDGE_RISING>; > - mount-matrix = "-0.984807753012208", /* x0 */ > - "0", /* y0 */ > - "-0.173648177666930", /* z0 */ > - "0", /* x1 */ > - "-1", /* y1 */ > - "0", /* z1 */ > - "-0.173648177666930", /* x2 */ > - "0", /* y2 */ > - "0.984807753012208"; /* z2 */ > - }; > - > - > - mpu9250@68 { > - compatible = "invensense,mpu9250"; > - reg = <0x68>; > - interrupt-parent = <&gpio3>; > - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; > - i2c-gate { > - #address-cells = <1>; > - #size-cells = <0>; > - ax8975@c { > - compatible = "ak,ak8975"; > - reg = <0x0c>; > - }; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml > new file mode 100644 > index 000000000000..9268b6ca2afe > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml > @@ -0,0 +1,103 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/imu/invensense,mpu6050.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device > + > +maintainers: > + - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> > + > +description: | > + These devices support both I2C and SPI bus interfaces. > + > +properties: > + compatible: > + enum: > + - invensense,iam20680 > + - invensense,icm20608 > + - invensense,icm20609 > + - invensense,icm20689 > + - invensense,icm20602 > + - invensense,icm20690 > + - invensense,mpu6000 > + - invensense,mpu6050 > + - invensense,mpu6500 > + - invensense,mpu6515 > + - invensense,mpu9150 > + - invensense,mpu9250 > + - invensense,mpu9255 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + spi-max-frequency: true > + > + vdd-supply: true > + vddio-supply: true > + > + mount-matrix: true > + > + i2c-gate: > + $ref: /schemas/i2c/i2c-controller.yaml > + unevaluatedProperties: false > + description: | > + These devices also support an auxiliary i2c bus via an i2c-gate. > + > +allOf: > + - if: > + not: > + properties: > + compatible: > + contains: > + enum: > + - invensense,mpu9150 > + - invensense,mpu9250 > + - invensense,mpu9255 > + then: > + properties: > + i2c-gate: false > + > +additionalProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + imu@68 { > + compatible = "invensense,mpu9250"; > + reg = <0x68>; > + interrupt-parent = <&gpio3>; > + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; > + mount-matrix = "-0.984807753012208", /* x0 */ > + "0", /* y0 */ > + "-0.173648177666930", /* z0 */ > + "0", /* x1 */ > + "-1", /* y1 */ > + "0", /* z1 */ > + "-0.173648177666930", /* x2 */ > + "0", /* y2 */ > + "0.984807753012208"; /* z2 */ > + i2c-gate { > + #address-cells = <1>; > + #size-cells = <0>; > + magnetometer@c { > + compatible = "ak,ak8975"; > + reg = <0x0c>; > + }; > + }; > + }; > + }; > +...
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt deleted file mode 100644 index f2f64749e818..000000000000 --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt +++ /dev/null @@ -1,67 +0,0 @@ -InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device - -http://www.invensense.com/mems/gyro/mpu6050.html - -Required properties: - - compatible : should be one of - "invensense,mpu6000" - "invensense,mpu6050" - "invensense,mpu6500" - "invensense,mpu6515" - "invensense,mpu9150" - "invensense,mpu9250" - "invensense,mpu9255" - "invensense,icm20608" - "invensense,icm20609" - "invensense,icm20689" - "invensense,icm20602" - "invensense,icm20690" - "invensense,iam20680" - - reg : the I2C address of the sensor - - interrupts: interrupt mapping for IRQ. It should be configured with flags - IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or - IRQ_TYPE_EDGE_FALLING. - - Refer to interrupt-controller/interrupts.txt for generic interrupt client node - bindings. - -Optional properties: - - vdd-supply: regulator phandle for VDD supply - - vddio-supply: regulator phandle for VDDIO supply - - mount-matrix: an optional 3x3 mounting rotation matrix - - i2c-gate node. These devices also support an auxiliary i2c bus. This is - simple enough to be described using the i2c-gate binding. See - i2c/i2c-gate.txt for more details. - -Example: - mpu6050@68 { - compatible = "invensense,mpu6050"; - reg = <0x68>; - interrupt-parent = <&gpio1>; - interrupts = <18 IRQ_TYPE_EDGE_RISING>; - mount-matrix = "-0.984807753012208", /* x0 */ - "0", /* y0 */ - "-0.173648177666930", /* z0 */ - "0", /* x1 */ - "-1", /* y1 */ - "0", /* z1 */ - "-0.173648177666930", /* x2 */ - "0", /* y2 */ - "0.984807753012208"; /* z2 */ - }; - - - mpu9250@68 { - compatible = "invensense,mpu9250"; - reg = <0x68>; - interrupt-parent = <&gpio3>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - ax8975@c { - compatible = "ak,ak8975"; - reg = <0x0c>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml new file mode 100644 index 000000000000..9268b6ca2afe --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/invensense,mpu6050.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device + +maintainers: + - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> + +description: | + These devices support both I2C and SPI bus interfaces. + +properties: + compatible: + enum: + - invensense,iam20680 + - invensense,icm20608 + - invensense,icm20609 + - invensense,icm20689 + - invensense,icm20602 + - invensense,icm20690 + - invensense,mpu6000 + - invensense,mpu6050 + - invensense,mpu6500 + - invensense,mpu6515 + - invensense,mpu9150 + - invensense,mpu9250 + - invensense,mpu9255 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: true + + vdd-supply: true + vddio-supply: true + + mount-matrix: true + + i2c-gate: + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + description: | + These devices also support an auxiliary i2c bus via an i2c-gate. + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - invensense,mpu9150 + - invensense,mpu9250 + - invensense,mpu9255 + then: + properties: + i2c-gate: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@68 { + compatible = "invensense,mpu9250"; + reg = <0x68>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + mount-matrix = "-0.984807753012208", /* x0 */ + "0", /* y0 */ + "-0.173648177666930", /* z0 */ + "0", /* x1 */ + "-1", /* y1 */ + "0", /* z1 */ + "-0.173648177666930", /* x2 */ + "0", /* y2 */ + "0.984807753012208"; /* z2 */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + magnetometer@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + }; + }; + }; + }; +...