@@ -1252,7 +1252,6 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
size_t channels_size;
int err;
- indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &accel_info;
err = st_sensors_power_enable(indio_dev);
@@ -171,7 +171,6 @@ int ltc2497core_probe(struct device *dev, struct iio_dev *indio_dev)
indio_dev->name = dev_name(dev);
indio_dev->info = <c2497core_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ltc2497core_channel;
indio_dev->num_channels = ARRAY_SIZE(ltc2497core_channel);
@@ -463,7 +463,6 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
struct st_sensors_platform_data *pdata;
int err;
- indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &gyro_info;
err = st_sensors_power_enable(indio_dev);
@@ -491,7 +491,6 @@ int st_magn_common_probe(struct iio_dev *indio_dev)
struct st_sensor_data *mdata = iio_priv(indio_dev);
int err;
- indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &magn_info;
err = st_sensors_power_enable(indio_dev);
@@ -444,7 +444,6 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
indio_dev->info = &ms5611_info;
indio_dev->channels = ms5611_channels;
indio_dev->num_channels = ARRAY_SIZE(ms5611_channels);
- indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->available_scan_masks = ms5611_scan_masks;
ret = ms5611_init(indio_dev);
@@ -686,7 +686,6 @@ int st_press_common_probe(struct iio_dev *indio_dev)
struct st_sensors_platform_data *pdata = dev_get_platdata(press_data->dev);
int err;
- indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &press_info;
err = st_sensors_power_enable(indio_dev);
@@ -161,7 +161,6 @@ static int tsys01_probe(struct iio_dev *indio_dev, struct device *dev)
indio_dev->info = &tsys01_info;
indio_dev->name = dev->driver->name;
- indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = tsys01_channels;
indio_dev->num_channels = ARRAY_SIZE(tsys01_channels);
@@ -540,7 +540,6 @@ int ade7854_probe(struct iio_dev *indio_dev, struct device *dev)
indio_dev->dev.parent = dev;
indio_dev->info = &ade7854_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
ret = devm_iio_device_register(dev, indio_dev);
if (ret)
Coccinele could not catch these, because the 'modes' assignment is done in a common-probe code for all these drivers. These drivers support 2 probing modes, and the common probe code is the one that initializes the 'modes'. These change removes the 'modes' init for these drivers, since they only initialize to INDIO_DIRECT_MODE only. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> --- drivers/iio/accel/st_accel_core.c | 1 - drivers/iio/adc/ltc2497-core.c | 1 - drivers/iio/gyro/st_gyro_core.c | 1 - drivers/iio/magnetometer/st_magn_core.c | 1 - drivers/iio/pressure/ms5611_core.c | 1 - drivers/iio/pressure/st_pressure_core.c | 1 - drivers/iio/temperature/tsys01.c | 1 - drivers/staging/iio/meter/ade7854.c | 1 - 8 files changed, 8 deletions(-)