@@ -101,18 +101,18 @@ static const struct vadc_map_pt adcmap_100k_104ef_104fb_1875_vref[] = {
};
static const struct vadc_map_pt adcmap7_die_temp[] = {
- { 433700, 1967},
- { 473100, 1964},
- { 512400, 1957},
- { 551500, 1949},
- { 590500, 1940},
- { 629300, 1930},
- { 667900, 1921},
- { 706400, 1910},
- { 744600, 1896},
- { 782500, 1878},
- { 820100, 1859},
- { 857300, 0},
+ { 857300, 160000 },
+ { 820100, 140000 },
+ { 782500, 120000 },
+ { 744600, 100000 },
+ { 706400, 80000 },
+ { 667900, 60000 },
+ { 629300, 40000 },
+ { 590500, 20000 },
+ { 551500, 0 },
+ { 512400, -20000 },
+ { 473100, -40000 },
+ { 433700, -60000 },
};
/*
@@ -585,33 +585,13 @@ static int qcom_vadc7_scale_hw_calib_die_temp(
u16 adc_code, int *result_mdec)
{
- int voltage, vtemp0, temp, i;
+ int voltage;
voltage = qcom_vadc_scale_code_voltage_factor(adc_code,
prescale, data, 1);
- if (adcmap7_die_temp[0].x > voltage) {
- *result_mdec = DIE_TEMP_ADC7_SCALE_1;
- return 0;
- }
-
- if (adcmap7_die_temp[ARRAY_SIZE(adcmap7_die_temp) - 1].x <= voltage) {
- *result_mdec = DIE_TEMP_ADC7_MAX;
- return 0;
- }
-
- for (i = 0; i < ARRAY_SIZE(adcmap7_die_temp); i++)
- if (adcmap7_die_temp[i].x > voltage)
- break;
-
- vtemp0 = adcmap7_die_temp[i - 1].x;
- voltage = voltage - vtemp0;
- temp = div64_s64(voltage * DIE_TEMP_ADC7_SCALE_FACTOR,
- adcmap7_die_temp[i - 1].y);
- temp += DIE_TEMP_ADC7_SCALE_1 + (DIE_TEMP_ADC7_SCALE_2 * (i - 1));
- *result_mdec = temp;
-
- return 0;
+ return qcom_vadc_map_voltage_temp(adcmap7_die_temp, ARRAY_SIZE(adcmap7_die_temp),
+ voltage, result_mdec);
}
static int qcom_vadc_scale_hw_smb_temp(
@@ -54,11 +54,6 @@
#define R_PU_100K 100000
#define RATIO_MAX_ADC7 BIT(14)
-#define DIE_TEMP_ADC7_SCALE_1 -60000
-#define DIE_TEMP_ADC7_SCALE_2 20000
-#define DIE_TEMP_ADC7_SCALE_FACTOR 1000
-#define DIE_TEMP_ADC7_MAX 160000
-
/*
* VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.
* VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for
qcom_vadc7_scale_hw_calib_die_temp() uses a table format different from the rest of volt/temp conversion functions in this file. Also the conversion functions results in non-monothonic values conversion, which seems wrong. Rewrite qcom_vadc7_scale_hw_calib_die_temp() to use qcom_vadc_map_voltage_temp() directly, like the rest of conversion functions do. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/iio/adc/qcom-vadc-common.c | 50 +++++++----------------- include/linux/iio/adc/qcom-vadc-common.h | 5 --- 2 files changed, 15 insertions(+), 40 deletions(-)