| Message ID | 20201209234857.1521453-3-alexandre.belloni@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio:pressure:ms5637: add ms5803 support | expand |
On Thu, 10 Dec 2020 00:48:53 +0100 Alexandre Belloni <alexandre.belloni@bootlin.com> wrote: > Some sensors in the ms58xx family have a different PROM length and a > different number of available resolution. introduce struct ms_tp_hw_data to Introduce > handle those differences. > > Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > --- > .../iio/common/ms_sensors/ms_sensors_i2c.h | 11 ++++++ > drivers/iio/pressure/ms5637.c | 35 +++++++++++++++---- > 2 files changed, 40 insertions(+), 6 deletions(-) > > diff --git a/drivers/iio/common/ms_sensors/ms_sensors_i2c.h b/drivers/iio/common/ms_sensors/ms_sensors_i2c.h > index bad09c80e47a..f4a88148c113 100644 > --- a/drivers/iio/common/ms_sensors/ms_sensors_i2c.h > +++ b/drivers/iio/common/ms_sensors/ms_sensors_i2c.h > @@ -25,6 +25,16 @@ struct ms_ht_dev { > u8 res_index; > }; > > +/** > + * struct ms_hw_data - Temperature/Pressure sensor hardware data > + * @prom_len: number of words in the PROM > + * @max_res_index: maximum sensor resolution index > + */ > +struct ms_tp_hw_data { > + u8 prom_len; > + u8 max_res_index; > +}; > + > /** > * struct ms_tp_dev - Temperature/Pressure sensor device structure > * @client: i2c client > @@ -36,6 +46,7 @@ struct ms_ht_dev { > struct ms_tp_dev { > struct i2c_client *client; > struct mutex lock; > + const struct ms_tp_hw_data *hw; > u16 prom[MS_SENSORS_TP_PROM_WORDS_NB + 1]; > u8 res_index; > }; > diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c > index 7c3f0ccd917c..351bfdb24fb4 100644 > --- a/drivers/iio/pressure/ms5637.c > +++ b/drivers/iio/pressure/ms5637.c > @@ -30,6 +30,11 @@ > > #include "../common/ms_sensors/ms_sensors_i2c.h" > > +struct ms_tp_data { > + const char *name; > + const struct ms_tp_hw_data *hw; > +}; > + > static const int ms5637_samp_freq[6] = { 960, 480, 240, 120, 60, 30 }; > /* String copy of the above const for readability purpose */ > static const char ms5637_show_samp_freq[] = "960 480 240 120 60 30"; > @@ -128,6 +133,7 @@ static const struct iio_info ms5637_info = { > > static int ms5637_probe(struct i2c_client *client) > { > + const struct ms_tp_data *data = device_get_match_data(&client->dev); As a follow up to the earlier fun with greybus etc, have to jump through some hoops to have a fallback here if we have a firmware type that can't do get_match_data driver/base/sw_node.c is the one greybus is using. We have drivers that don't do this because frankly I didn't know about it until a month or two ago. However, I'm not keen to introduce any more. Thanks, Jonathan > struct ms_tp_dev *dev_data; > struct iio_dev *indio_dev; > int ret; > @@ -147,11 +153,12 @@ static int ms5637_probe(struct i2c_client *client) > > dev_data = iio_priv(indio_dev); > dev_data->client = client; > - dev_data->res_index = 5; > + dev_data->res_index = data->hw->max_res_index; > + dev_data->hw = data->hw; > mutex_init(&dev_data->lock); > > indio_dev->info = &ms5637_info; > - indio_dev->name = device_get_match_data(&client->dev); > + indio_dev->name = data->name; > indio_dev->modes = INDIO_DIRECT_MODE; > indio_dev->channels = ms5637_channels; > indio_dev->num_channels = ARRAY_SIZE(ms5637_channels); > @@ -169,11 +176,27 @@ static int ms5637_probe(struct i2c_client *client) > return devm_iio_device_register(&client->dev, indio_dev); > } > > +static const struct ms_tp_hw_data ms5637_hw_data = { > + .prom_len = 7, > + .max_res_index = 5 > +}; > + > +static const struct ms_tp_data ms5637_data = { .name = "ms5637", .hw = &ms5637_hw_data }; > + > +static const struct ms_tp_data ms5805_data = { .name = "ms5805", .hw = &ms5637_hw_data }; > + > +static const struct ms_tp_data ms5837_data = { .name = "ms5837", .hw = &ms5637_hw_data }; > + > +static const struct ms_tp_data ms8607_data = { > + .name = "ms8607-temppressure", > + .hw = &ms5637_hw_data, > +}; > + > static const struct of_device_id ms5637_of_match[] = { > - { .compatible = "meas,ms5637", .data = "ms5637" }, > - { .compatible = "meas,ms5805", .data = "ms5805" }, > - { .compatible = "meas,ms5837", .data = "ms5837" }, > - { .compatible = "meas,ms8607-temppressure", .data = "ms8607-temppressure" }, > + { .compatible = "meas,ms5637", .data = &ms5637_data }, > + { .compatible = "meas,ms5805", .data = &ms5805_data }, > + { .compatible = "meas,ms5837", .data = &ms5837_data }, > + { .compatible = "meas,ms8607-temppressure", .data = &ms8607_data }, > { }, > }; > MODULE_DEVICE_TABLE(of, ms5637_of_match);
On 13/12/2020 17:12:37+0000, Jonathan Cameron wrote: > > static const int ms5637_samp_freq[6] = { 960, 480, 240, 120, 60, 30 }; > > /* String copy of the above const for readability purpose */ > > static const char ms5637_show_samp_freq[] = "960 480 240 120 60 30"; > > @@ -128,6 +133,7 @@ static const struct iio_info ms5637_info = { > > > > static int ms5637_probe(struct i2c_client *client) > > { > > + const struct ms_tp_data *data = device_get_match_data(&client->dev); > > As a follow up to the earlier fun with greybus etc, have to jump through > some hoops to have a fallback here if we have a firmware type that can't > do get_match_data driver/base/sw_node.c is the one greybus is using. > > We have drivers that don't do this because frankly I didn't know about it > until a month or two ago. However, I'm not keen to introduce any > more. > Couldn't greybus be fixed in that regard? Using the i2c_device_id has been deprecated for a while now. what we could do is only provide ms5803 support when there is an of_node. So this doesn't break the ABI and doesn't break greybus and at the same time doesn't unnecessarily add complexity to the probe for something that will probably never be used.
diff --git a/drivers/iio/common/ms_sensors/ms_sensors_i2c.h b/drivers/iio/common/ms_sensors/ms_sensors_i2c.h index bad09c80e47a..f4a88148c113 100644 --- a/drivers/iio/common/ms_sensors/ms_sensors_i2c.h +++ b/drivers/iio/common/ms_sensors/ms_sensors_i2c.h @@ -25,6 +25,16 @@ struct ms_ht_dev { u8 res_index; }; +/** + * struct ms_hw_data - Temperature/Pressure sensor hardware data + * @prom_len: number of words in the PROM + * @max_res_index: maximum sensor resolution index + */ +struct ms_tp_hw_data { + u8 prom_len; + u8 max_res_index; +}; + /** * struct ms_tp_dev - Temperature/Pressure sensor device structure * @client: i2c client @@ -36,6 +46,7 @@ struct ms_ht_dev { struct ms_tp_dev { struct i2c_client *client; struct mutex lock; + const struct ms_tp_hw_data *hw; u16 prom[MS_SENSORS_TP_PROM_WORDS_NB + 1]; u8 res_index; }; diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c index 7c3f0ccd917c..351bfdb24fb4 100644 --- a/drivers/iio/pressure/ms5637.c +++ b/drivers/iio/pressure/ms5637.c @@ -30,6 +30,11 @@ #include "../common/ms_sensors/ms_sensors_i2c.h" +struct ms_tp_data { + const char *name; + const struct ms_tp_hw_data *hw; +}; + static const int ms5637_samp_freq[6] = { 960, 480, 240, 120, 60, 30 }; /* String copy of the above const for readability purpose */ static const char ms5637_show_samp_freq[] = "960 480 240 120 60 30"; @@ -128,6 +133,7 @@ static const struct iio_info ms5637_info = { static int ms5637_probe(struct i2c_client *client) { + const struct ms_tp_data *data = device_get_match_data(&client->dev); struct ms_tp_dev *dev_data; struct iio_dev *indio_dev; int ret; @@ -147,11 +153,12 @@ static int ms5637_probe(struct i2c_client *client) dev_data = iio_priv(indio_dev); dev_data->client = client; - dev_data->res_index = 5; + dev_data->res_index = data->hw->max_res_index; + dev_data->hw = data->hw; mutex_init(&dev_data->lock); indio_dev->info = &ms5637_info; - indio_dev->name = device_get_match_data(&client->dev); + indio_dev->name = data->name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = ms5637_channels; indio_dev->num_channels = ARRAY_SIZE(ms5637_channels); @@ -169,11 +176,27 @@ static int ms5637_probe(struct i2c_client *client) return devm_iio_device_register(&client->dev, indio_dev); } +static const struct ms_tp_hw_data ms5637_hw_data = { + .prom_len = 7, + .max_res_index = 5 +}; + +static const struct ms_tp_data ms5637_data = { .name = "ms5637", .hw = &ms5637_hw_data }; + +static const struct ms_tp_data ms5805_data = { .name = "ms5805", .hw = &ms5637_hw_data }; + +static const struct ms_tp_data ms5837_data = { .name = "ms5837", .hw = &ms5637_hw_data }; + +static const struct ms_tp_data ms8607_data = { + .name = "ms8607-temppressure", + .hw = &ms5637_hw_data, +}; + static const struct of_device_id ms5637_of_match[] = { - { .compatible = "meas,ms5637", .data = "ms5637" }, - { .compatible = "meas,ms5805", .data = "ms5805" }, - { .compatible = "meas,ms5837", .data = "ms5837" }, - { .compatible = "meas,ms8607-temppressure", .data = "ms8607-temppressure" }, + { .compatible = "meas,ms5637", .data = &ms5637_data }, + { .compatible = "meas,ms5805", .data = &ms5805_data }, + { .compatible = "meas,ms5837", .data = &ms5837_data }, + { .compatible = "meas,ms8607-temppressure", .data = &ms8607_data }, { }, }; MODULE_DEVICE_TABLE(of, ms5637_of_match);
Some sensors in the ms58xx family have a different PROM length and a different number of available resolution. introduce struct ms_tp_hw_data to handle those differences. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- .../iio/common/ms_sensors/ms_sensors_i2c.h | 11 ++++++ drivers/iio/pressure/ms5637.c | 35 +++++++++++++++---- 2 files changed, 40 insertions(+), 6 deletions(-)