[1/2,v6] iio: accel: yamaha-yas530: Add DT bindings

Commit Message

Linus Walleij Dec. 24, 2020, 12:08 p.m. UTC

This adds device tree bindings for the Yamaha YAS530
family of magnetometers/compass sensors.

Cc: [e-mail]
Cc: [e-mail]
Cc: Andy Shevchenko <[e-mail]>
Cc: Jonathan Bakker <[e-mail]>
Reviewed-by: Rob Herring <[e-mail]>
Signed-off-by: Linus Walleij <[e-mail]>
---
ChangeLog v5->v6:
- Resend with the other patch. No changes.
ChangeLog v4->v5:
- Collect Rob's Reviewed-by tag.
ChangeLog v3->v4:
- Rename the bindings and file yas530 after the first
  introduced component in the family.
- Simplify conditional logic using the if: not: YAML
  constructions.
- Use the possibility to set a property to false to just
  remvove reset GPIOs and interrupts from variants that
  do not have them.
ChangeLog v2->v3:
- Restrict to cover the YAS53x variants, it turns out that
  YAS529 is a very different component from the others so
  keep that for a separate document when/if needed.
- Rename the file and binding yamaha,53x.yaml
- Use - if: clauses to restrict some properties.
- Fix some spelling mistakes.
- Restrict the nodename to be "magnetometer@[0-9a-f]"
ChangeLog v1->v2:
- Add Yamaha to the vendor list, I was surprised to find
  they were not yet listed.
---
 .../iio/magnetometer/yamaha,yas530.yaml       | 112 ++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 2 files changed, 114 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml

Patch

diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
new file mode 100644
index 000000000000..4b0ef1ef5445
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -0,0 +1,112 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/yamaha,yas530.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Yamaha YAS530 family of magnetometer sensors
+
+maintainers:
+  - Linus Walleij <[e-mail]>
+
+description:
+  The Yamaha YAS530 magnetometers is a line of 3-axis magnetometers
+  first introduced by Yamaha in 2009 with the YAS530. They are successors
+  of Yamaha's first magnetometer YAS529. Over the years this magnetometer
+  has been miniaturized and appeared in a number of different variants.
+
+properties:
+  $nodename:
+    pattern: '^magnetometer@[0-9a-f]+$'
+
+  compatible:
+    items:
+      - enum:
+          - yamaha,yas530
+          - yamaha,yas532
+          - yamaha,yas533
+          - yamaha,yas535
+          - yamaha,yas536
+          - yamaha,yas537
+          - yamaha,yas539
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: The YAS530 sensor has a RSTN pin used to reset
+      the logic inside the sensor. This GPIO line should connect
+      to that pin and be marked as GPIO_ACTIVE_LOW.
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt for INT pin for interrupt generation.
+      The polarity, whether the interrupt is active on the rising
+      or the falling edge, is software-configurable in the hardware.
+
+  vdd-supply:
+    description: An optional regulator providing core power supply
+      on the VDD pin, typically 1.8 V or 3.0 V.
+
+  iovdd-supply:
+    description: An optional regulator providing I/O power supply
+      for the I2C interface on the IOVDD pin, typically 1.8 V.
+
+  mount-matrix:
+    description: An optional 3x3 mounting rotation matrix.
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            items:
+              const: yamaha,yas530
+    then:
+      properties:
+        reset-gpios: false
+
+  - if:
+      properties:
+        compatible:
+          items:
+            const: yamaha,yas539
+    then:
+      properties:
+        interrupts: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c-0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@2e {
+          compatible = "yamaha,yas530";
+          reg = <0x2e>;
+          vdd-supply = <&ldo1_reg>;
+          iovdd-supply = <&ldo2_reg>;
+          reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+          interrupts = <&gpio6 13 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+
+    i2c-1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@2e {
+          compatible = "yamaha,yas539";
+          reg = <0x2e>;
+          vdd-supply = <&ldo1_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 2735be1a8470..0340674c72bd 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1210,6 +1210,8 @@  patternProperties:
     description: Shenzhen Xunlong Software CO.,Limited
   "^xylon,.*":
     description: Xylon
+  "^yamaha,.*":
+    description: Yamaha Corporation
   "^ylm,.*":
     description: Shenzhen Yangliming Electronic Technology Co., Ltd.
   "^yna,.*":