@@ -21,6 +21,7 @@
#define LSM303AGR_MAGN_DEV_NAME "lsm303agr_magn"
#define LIS2MDL_MAGN_DEV_NAME "lis2mdl"
#define LSM9DS1_MAGN_DEV_NAME "lsm9ds1_magn"
+#define IIS2MDC_MAGN_DEV_NAME "iis2mdc"
const struct st_sensor_settings *st_magn_get_settings(const char *name);
int st_magn_common_probe(struct iio_dev *indio_dev);
@@ -337,6 +337,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
.sensors_supported = {
[0] = LSM303AGR_MAGN_DEV_NAME,
[1] = LIS2MDL_MAGN_DEV_NAME,
+ [2] = IIS2MDC_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_3_16bit_channels,
.odr = {
@@ -46,6 +46,10 @@ static const struct of_device_id st_magn_of_match[] = {
.compatible = "st,lsm9ds1-magn",
.data = LSM9DS1_MAGN_DEV_NAME,
},
+ {
+ .compatible = "st,iis2mdc",
+ .data = IIS2MDC_MAGN_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_magn_of_match);
@@ -101,6 +105,7 @@ static const struct i2c_device_id st_magn_id_table[] = {
{ LSM303AGR_MAGN_DEV_NAME },
{ LIS2MDL_MAGN_DEV_NAME },
{ LSM9DS1_MAGN_DEV_NAME },
+ { IIS2MDC_MAGN_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_magn_id_table);
@@ -41,6 +41,10 @@ static const struct of_device_id st_magn_of_match[] = {
.compatible = "st,lsm9ds1-magn",
.data = LSM9DS1_MAGN_DEV_NAME,
},
+ {
+ .compatible = "st,iis2mdc",
+ .data = IIS2MDC_MAGN_DEV_NAME,
+ },
{}
};
MODULE_DEVICE_TABLE(of, st_magn_of_match);
@@ -92,6 +96,7 @@ static const struct spi_device_id st_magn_id_table[] = {
{ LSM303AGR_MAGN_DEV_NAME },
{ LIS2MDL_MAGN_DEV_NAME },
{ LSM9DS1_MAGN_DEV_NAME },
+ { IIS2MDC_MAGN_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_magn_id_table);
Add support for ST magnetometer IIS2MDC, an I2C/SPI interface 3-axis magnetometer. The patch was tested on the instrument with IIS2MDC via I2C interface. Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> --- drivers/iio/magnetometer/st_magn.h | 1 + drivers/iio/magnetometer/st_magn_core.c | 1 + drivers/iio/magnetometer/st_magn_i2c.c | 5 +++++ drivers/iio/magnetometer/st_magn_spi.c | 5 +++++ 4 files changed, 12 insertions(+)