| Message ID | 20210414084955.260117-1-aardelean@deviqon.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER | expand |
On Wed, 2021-04-14 at 11:49 +0300, Alexandru Ardelean wrote: > During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer > setup into hid_sensor_setup_trigger"), the > iio_triggered_buffer_{setup,cleanup}() functions got moved under the > hid-sensor-trigger module. > > The above change works fine, if any of the sensors get built. > However, when > only the common hid-sensor-trigger module gets built (and none of the > drivers), then the IIO_TRIGGERED_BUFFER symbol isn't > selected/enforced. > > Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER > symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the > hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER > gets > selected. > > All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, > this > change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. > > Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup > into hid_sensor_setup_trigger") > Reported-by: Thomas Deutschmann <whissi@gentoo.org> > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > --- > drivers/iio/accel/Kconfig | 1 - > drivers/iio/common/hid-sensors/Kconfig | 1 + > drivers/iio/gyro/Kconfig | 1 - > drivers/iio/humidity/Kconfig | 1 - > drivers/iio/light/Kconfig | 2 -- > drivers/iio/magnetometer/Kconfig | 1 - > drivers/iio/orientation/Kconfig | 2 -- > drivers/iio/pressure/Kconfig | 1 - > drivers/iio/temperature/Kconfig | 1 - > 9 files changed, 1 insertion(+), 10 deletions(-) > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > index cceda3cecbcf..8b1723635cce 100644 > --- a/drivers/iio/accel/Kconfig > +++ b/drivers/iio/accel/Kconfig > @@ -229,7 +229,6 @@ config DMARD10 > config HID_SENSOR_ACCEL_3D > depends on HID_SENSOR_HUB > select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > select HID_SENSOR_IIO_COMMON > select HID_SENSOR_IIO_TRIGGER > tristate "HID Accelerometers 3D" > diff --git a/drivers/iio/common/hid-sensors/Kconfig > b/drivers/iio/common/hid-sensors/Kconfig > index 24d492567336..2a3dd3b907be 100644 > --- a/drivers/iio/common/hid-sensors/Kconfig > +++ b/drivers/iio/common/hid-sensors/Kconfig > @@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER > tristate "Common module (trigger) for all HID Sensor IIO > drivers" > depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON && > IIO_BUFFER > select IIO_TRIGGER > + select IIO_TRIGGERED_BUFFER > help > Say yes here to build trigger support for HID sensors. > Triggers will be send if all requested attributes were read. > diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig > index 5824f2edf975..20b5ac7ab66a 100644 > --- a/drivers/iio/gyro/Kconfig > +++ b/drivers/iio/gyro/Kconfig > @@ -111,7 +111,6 @@ config FXAS21002C_SPI > config HID_SENSOR_GYRO_3D > depends on HID_SENSOR_HUB > select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > select HID_SENSOR_IIO_COMMON > select HID_SENSOR_IIO_TRIGGER > tristate "HID Gyroscope 3D" > diff --git a/drivers/iio/humidity/Kconfig > b/drivers/iio/humidity/Kconfig > index 6549fcf6db69..2de5494e7c22 100644 > --- a/drivers/iio/humidity/Kconfig > +++ b/drivers/iio/humidity/Kconfig > @@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY > tristate "HID Environmental humidity sensor" > depends on HID_SENSOR_HUB > select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > select HID_SENSOR_IIO_COMMON > select HID_SENSOR_IIO_TRIGGER > help > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig > index 33ad4dd0b5c7..917f9becf9c7 100644 > --- a/drivers/iio/light/Kconfig > +++ b/drivers/iio/light/Kconfig > @@ -256,7 +256,6 @@ config ISL29125 > config HID_SENSOR_ALS > depends on HID_SENSOR_HUB > select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > select HID_SENSOR_IIO_COMMON > select HID_SENSOR_IIO_TRIGGER > tristate "HID ALS" > @@ -270,7 +269,6 @@ config HID_SENSOR_ALS > config HID_SENSOR_PROX > depends on HID_SENSOR_HUB > select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > select HID_SENSOR_IIO_COMMON > select HID_SENSOR_IIO_TRIGGER > tristate "HID PROX" > diff --git a/drivers/iio/magnetometer/Kconfig > b/drivers/iio/magnetometer/Kconfig > index 5d4ffd66032e..74ad5701c6c2 100644 > --- a/drivers/iio/magnetometer/Kconfig > +++ b/drivers/iio/magnetometer/Kconfig > @@ -95,7 +95,6 @@ config MAG3110 > config HID_SENSOR_MAGNETOMETER_3D > depends on HID_SENSOR_HUB > select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > select HID_SENSOR_IIO_COMMON > select HID_SENSOR_IIO_TRIGGER > tristate "HID Magenetometer 3D" > diff --git a/drivers/iio/orientation/Kconfig > b/drivers/iio/orientation/Kconfig > index a505583cc2fd..396cbbb867f4 100644 > --- a/drivers/iio/orientation/Kconfig > +++ b/drivers/iio/orientation/Kconfig > @@ -9,7 +9,6 @@ menu "Inclinometer sensors" > config HID_SENSOR_INCLINOMETER_3D > depends on HID_SENSOR_HUB > select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > select HID_SENSOR_IIO_COMMON > select HID_SENSOR_IIO_TRIGGER > tristate "HID Inclinometer 3D" > @@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D > config HID_SENSOR_DEVICE_ROTATION > depends on HID_SENSOR_HUB > select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > select HID_SENSOR_IIO_COMMON > select HID_SENSOR_IIO_TRIGGER > tristate "HID Device Rotation" > diff --git a/drivers/iio/pressure/Kconfig > b/drivers/iio/pressure/Kconfig > index 689b978db4f9..fc0d3cfca418 100644 > --- a/drivers/iio/pressure/Kconfig > +++ b/drivers/iio/pressure/Kconfig > @@ -79,7 +79,6 @@ config DPS310 > config HID_SENSOR_PRESS > depends on HID_SENSOR_HUB > select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > select HID_SENSOR_IIO_COMMON > select HID_SENSOR_IIO_TRIGGER > tristate "HID PRESS" > diff --git a/drivers/iio/temperature/Kconfig > b/drivers/iio/temperature/Kconfig > index c5482983f568..f20ae3c963cb 100644 > --- a/drivers/iio/temperature/Kconfig > +++ b/drivers/iio/temperature/Kconfig > @@ -45,7 +45,6 @@ config HID_SENSOR_TEMP > tristate "HID Environmental temperature sensor" > depends on HID_SENSOR_HUB > select IIO_BUFFER > - select IIO_TRIGGERED_BUFFER > select HID_SENSOR_IIO_COMMON > select HID_SENSOR_IIO_TRIGGER > help
On Thu, 15 Apr 2021 09:58:33 -0700 Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> wrote: > On Wed, 2021-04-14 at 11:49 +0300, Alexandru Ardelean wrote: > > During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer > > setup into hid_sensor_setup_trigger"), the > > iio_triggered_buffer_{setup,cleanup}() functions got moved under the > > hid-sensor-trigger module. > > > > The above change works fine, if any of the sensors get built. > > However, when > > only the common hid-sensor-trigger module gets built (and none of the > > drivers), then the IIO_TRIGGERED_BUFFER symbol isn't > > selected/enforced. > > > > Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER > > symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the > > hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER > > gets > > selected. > > > > All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, > > this > > change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. > > > > Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup > > into hid_sensor_setup_trigger") > > Reported-by: Thomas Deutschmann <whissi@gentoo.org> > > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > > Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> > Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Applied to the fixes-togreg branch of iio.git. Always good to see the autobuilders can find corners no one sane would ever hit :) Jonathan > > > --- > > drivers/iio/accel/Kconfig | 1 - > > drivers/iio/common/hid-sensors/Kconfig | 1 + > > drivers/iio/gyro/Kconfig | 1 - > > drivers/iio/humidity/Kconfig | 1 - > > drivers/iio/light/Kconfig | 2 -- > > drivers/iio/magnetometer/Kconfig | 1 - > > drivers/iio/orientation/Kconfig | 2 -- > > drivers/iio/pressure/Kconfig | 1 - > > drivers/iio/temperature/Kconfig | 1 - > > 9 files changed, 1 insertion(+), 10 deletions(-) > > > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > > index cceda3cecbcf..8b1723635cce 100644 > > --- a/drivers/iio/accel/Kconfig > > +++ b/drivers/iio/accel/Kconfig > > @@ -229,7 +229,6 @@ config DMARD10 > > config HID_SENSOR_ACCEL_3D > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > select HID_SENSOR_IIO_COMMON > > select HID_SENSOR_IIO_TRIGGER > > tristate "HID Accelerometers 3D" > > diff --git a/drivers/iio/common/hid-sensors/Kconfig > > b/drivers/iio/common/hid-sensors/Kconfig > > index 24d492567336..2a3dd3b907be 100644 > > --- a/drivers/iio/common/hid-sensors/Kconfig > > +++ b/drivers/iio/common/hid-sensors/Kconfig > > @@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER > > tristate "Common module (trigger) for all HID Sensor IIO > > drivers" > > depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON && > > IIO_BUFFER > > select IIO_TRIGGER > > + select IIO_TRIGGERED_BUFFER > > help > > Say yes here to build trigger support for HID sensors. > > Triggers will be send if all requested attributes were read. > > diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig > > index 5824f2edf975..20b5ac7ab66a 100644 > > --- a/drivers/iio/gyro/Kconfig > > +++ b/drivers/iio/gyro/Kconfig > > @@ -111,7 +111,6 @@ config FXAS21002C_SPI > > config HID_SENSOR_GYRO_3D > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > select HID_SENSOR_IIO_COMMON > > select HID_SENSOR_IIO_TRIGGER > > tristate "HID Gyroscope 3D" > > diff --git a/drivers/iio/humidity/Kconfig > > b/drivers/iio/humidity/Kconfig > > index 6549fcf6db69..2de5494e7c22 100644 > > --- a/drivers/iio/humidity/Kconfig > > +++ b/drivers/iio/humidity/Kconfig > > @@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY > > tristate "HID Environmental humidity sensor" > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > select HID_SENSOR_IIO_COMMON > > select HID_SENSOR_IIO_TRIGGER > > help > > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig > > index 33ad4dd0b5c7..917f9becf9c7 100644 > > --- a/drivers/iio/light/Kconfig > > +++ b/drivers/iio/light/Kconfig > > @@ -256,7 +256,6 @@ config ISL29125 > > config HID_SENSOR_ALS > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > select HID_SENSOR_IIO_COMMON > > select HID_SENSOR_IIO_TRIGGER > > tristate "HID ALS" > > @@ -270,7 +269,6 @@ config HID_SENSOR_ALS > > config HID_SENSOR_PROX > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > select HID_SENSOR_IIO_COMMON > > select HID_SENSOR_IIO_TRIGGER > > tristate "HID PROX" > > diff --git a/drivers/iio/magnetometer/Kconfig > > b/drivers/iio/magnetometer/Kconfig > > index 5d4ffd66032e..74ad5701c6c2 100644 > > --- a/drivers/iio/magnetometer/Kconfig > > +++ b/drivers/iio/magnetometer/Kconfig > > @@ -95,7 +95,6 @@ config MAG3110 > > config HID_SENSOR_MAGNETOMETER_3D > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > select HID_SENSOR_IIO_COMMON > > select HID_SENSOR_IIO_TRIGGER > > tristate "HID Magenetometer 3D" > > diff --git a/drivers/iio/orientation/Kconfig > > b/drivers/iio/orientation/Kconfig > > index a505583cc2fd..396cbbb867f4 100644 > > --- a/drivers/iio/orientation/Kconfig > > +++ b/drivers/iio/orientation/Kconfig > > @@ -9,7 +9,6 @@ menu "Inclinometer sensors" > > config HID_SENSOR_INCLINOMETER_3D > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > select HID_SENSOR_IIO_COMMON > > select HID_SENSOR_IIO_TRIGGER > > tristate "HID Inclinometer 3D" > > @@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D > > config HID_SENSOR_DEVICE_ROTATION > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > select HID_SENSOR_IIO_COMMON > > select HID_SENSOR_IIO_TRIGGER > > tristate "HID Device Rotation" > > diff --git a/drivers/iio/pressure/Kconfig > > b/drivers/iio/pressure/Kconfig > > index 689b978db4f9..fc0d3cfca418 100644 > > --- a/drivers/iio/pressure/Kconfig > > +++ b/drivers/iio/pressure/Kconfig > > @@ -79,7 +79,6 @@ config DPS310 > > config HID_SENSOR_PRESS > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > select HID_SENSOR_IIO_COMMON > > select HID_SENSOR_IIO_TRIGGER > > tristate "HID PRESS" > > diff --git a/drivers/iio/temperature/Kconfig > > b/drivers/iio/temperature/Kconfig > > index c5482983f568..f20ae3c963cb 100644 > > --- a/drivers/iio/temperature/Kconfig > > +++ b/drivers/iio/temperature/Kconfig > > @@ -45,7 +45,6 @@ config HID_SENSOR_TEMP > > tristate "HID Environmental temperature sensor" > > depends on HID_SENSOR_HUB > > select IIO_BUFFER > > - select IIO_TRIGGERED_BUFFER > > select HID_SENSOR_IIO_COMMON > > select HID_SENSOR_IIO_TRIGGER > > help >
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index cceda3cecbcf..8b1723635cce 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -229,7 +229,6 @@ config DMARD10 config HID_SENSOR_ACCEL_3D depends on HID_SENSOR_HUB select IIO_BUFFER - select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID Accelerometers 3D" diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig index 24d492567336..2a3dd3b907be 100644 --- a/drivers/iio/common/hid-sensors/Kconfig +++ b/drivers/iio/common/hid-sensors/Kconfig @@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER tristate "Common module (trigger) for all HID Sensor IIO drivers" depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON && IIO_BUFFER select IIO_TRIGGER + select IIO_TRIGGERED_BUFFER help Say yes here to build trigger support for HID sensors. Triggers will be send if all requested attributes were read. diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig index 5824f2edf975..20b5ac7ab66a 100644 --- a/drivers/iio/gyro/Kconfig +++ b/drivers/iio/gyro/Kconfig @@ -111,7 +111,6 @@ config FXAS21002C_SPI config HID_SENSOR_GYRO_3D depends on HID_SENSOR_HUB select IIO_BUFFER - select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID Gyroscope 3D" diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 6549fcf6db69..2de5494e7c22 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY tristate "HID Environmental humidity sensor" depends on HID_SENSOR_HUB select IIO_BUFFER - select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER help diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 33ad4dd0b5c7..917f9becf9c7 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -256,7 +256,6 @@ config ISL29125 config HID_SENSOR_ALS depends on HID_SENSOR_HUB select IIO_BUFFER - select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID ALS" @@ -270,7 +269,6 @@ config HID_SENSOR_ALS config HID_SENSOR_PROX depends on HID_SENSOR_HUB select IIO_BUFFER - select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID PROX" diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 5d4ffd66032e..74ad5701c6c2 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -95,7 +95,6 @@ config MAG3110 config HID_SENSOR_MAGNETOMETER_3D depends on HID_SENSOR_HUB select IIO_BUFFER - select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID Magenetometer 3D" diff --git a/drivers/iio/orientation/Kconfig b/drivers/iio/orientation/Kconfig index a505583cc2fd..396cbbb867f4 100644 --- a/drivers/iio/orientation/Kconfig +++ b/drivers/iio/orientation/Kconfig @@ -9,7 +9,6 @@ menu "Inclinometer sensors" config HID_SENSOR_INCLINOMETER_3D depends on HID_SENSOR_HUB select IIO_BUFFER - select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID Inclinometer 3D" @@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D config HID_SENSOR_DEVICE_ROTATION depends on HID_SENSOR_HUB select IIO_BUFFER - select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID Device Rotation" diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 689b978db4f9..fc0d3cfca418 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -79,7 +79,6 @@ config DPS310 config HID_SENSOR_PRESS depends on HID_SENSOR_HUB select IIO_BUFFER - select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID PRESS" diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig index c5482983f568..f20ae3c963cb 100644 --- a/drivers/iio/temperature/Kconfig +++ b/drivers/iio/temperature/Kconfig @@ -45,7 +45,6 @@ config HID_SENSOR_TEMP tristate "HID Environmental temperature sensor" depends on HID_SENSOR_HUB select IIO_BUFFER - select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER help
During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger"), the iio_triggered_buffer_{setup,cleanup}() functions got moved under the hid-sensor-trigger module. The above change works fine, if any of the sensors get built. However, when only the common hid-sensor-trigger module gets built (and none of the drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced. Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets selected. All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger") Reported-by: Thomas Deutschmann <whissi@gentoo.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> --- drivers/iio/accel/Kconfig | 1 - drivers/iio/common/hid-sensors/Kconfig | 1 + drivers/iio/gyro/Kconfig | 1 - drivers/iio/humidity/Kconfig | 1 - drivers/iio/light/Kconfig | 2 -- drivers/iio/magnetometer/Kconfig | 1 - drivers/iio/orientation/Kconfig | 2 -- drivers/iio/pressure/Kconfig | 1 - drivers/iio/temperature/Kconfig | 1 - 9 files changed, 1 insertion(+), 10 deletions(-)