@@ -394,6 +394,11 @@ static int ad7791_setup(struct ad7791_state *st,
st->mode);
}
+static void ad7791_reg_disable(void *reg)
+{
+ regulator_disable(reg);
+}
+
static int ad7791_probe(struct spi_device *spi)
{
struct ad7791_platform_data *pdata = spi->dev.platform_data;
@@ -420,11 +425,13 @@ static int ad7791_probe(struct spi_device *spi)
if (ret)
return ret;
+ ret = devm_add_action_or_reset(&spi->dev, ad7791_reg_disable, st->reg);
+ if (ret)
+ return ret;
+
st->info = &ad7791_chip_infos[spi_get_device_id(spi)->driver_data];
ad_sd_init(&st->sd, indio_dev, spi, &ad7791_sigma_delta_info);
- spi_set_drvdata(spi, indio_dev);
-
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = st->info->channels;
@@ -434,39 +441,15 @@ static int ad7791_probe(struct spi_device *spi)
else
indio_dev->info = &ad7791_no_filter_info;
- ret = ad_sd_setup_buffer_and_trigger(indio_dev);
+ ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
if (ret)
- goto error_disable_reg;
+ return ret;
ret = ad7791_setup(st, pdata);
if (ret)
- goto error_remove_trigger;
-
- ret = iio_device_register(indio_dev);
- if (ret)
- goto error_remove_trigger;
-
- return 0;
-
-error_remove_trigger:
- ad_sd_cleanup_buffer_and_trigger(indio_dev);
-error_disable_reg:
- regulator_disable(st->reg);
-
- return ret;
-}
-
-static int ad7791_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct ad7791_state *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- ad_sd_cleanup_buffer_and_trigger(indio_dev);
-
- regulator_disable(st->reg);
+ return ret;
- return 0;
+ return devm_iio_device_register(&spi->dev, indio_dev);
}
static const struct spi_device_id ad7791_spi_ids[] = {
@@ -484,7 +467,6 @@ static struct spi_driver ad7791_driver = {
.name = "ad7791",
},
.probe = ad7791_probe,
- .remove = ad7791_remove,
.id_table = ad7791_spi_ids,
};
module_spi_driver(ad7791_driver);
With the devm_ad_sd_setup_buffer_and_trigger() helper, it's a bit easier now to convert the probe of the AD7791 driver to use device-managed functions. Only the regulator disable requires a devm_add_action_or_reset() callback. This change does that, cleaning up the driver a bit. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> --- drivers/iio/adc/ad7791.c | 44 ++++++++++++---------------------------- 1 file changed, 13 insertions(+), 31 deletions(-)